Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC H NO 769 SOUTH CIVIL LINES MUZAFFAR NAGAR UP | MUZAFFARNAGAR | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | L1 | Accepted-AOC AOC accepted. | |
| 2 | L2₹44.5 L+₹7.7 L (20.9%)Rejected-AOC H NO 3927 SHAH COLONY SECTOR 8 NEAR NHPC COLONY SAILI ROAD TEHSIL DISTT PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC AOC rejected. | |
| 3 | L3₹45.0 L+₹8.2 L (22.2%)Rejected-AOC | L3 | Rejected-AOC AOC rejected. | |
| 4 | L4₹45.9 L+₹9.1 L (24.6%)Rejected-AOC 37 2 INDIRA COLONY CHUKHUWALA DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC AOC rejected. | |
| 5 | L5₹49.8 L+₹12.9 L (35.1%)Rejected-AOC | L5 | Rejected-AOC AOC rejected. |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
Certain repair and welcome maintenance of offrs md accn under AGE B/R-I of GE Dehradun.
2022_MES_554744_1
8545/A/E8
Open Tender
Civil Works
Item Rate
180 days
GE Dehradun
Class D cat a (i)
8 documents required · 8 mandatory
₹500
GE Dehradun
₹95,000
Yes
20 Dec 2022
27 Sept 2022
20 Oct 2022
27 Sept 2022
18 Oct 2022
11 Oct 2022
Amount
M&L Rendering 15 mm thick with WPC on parapet,chajja, facia, celing etc in CM 1:3 finished surfaces even and smooth (with out using extra cement) on external surfaces and applying two coat of whether proof exterior emulsion paint (Apex), over a primer coat and over Damp proof coat, including taking down of existing plaster of any description complete all as specified and directed.
M&L for anti termite treatment at point of contract of woodwork/ masonry by chemical emulsion (oil or kerosene based solution) @ 0.5 ltr per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and ceiling the same with cement mortar 1:2 complete all as specified and directed by Engr-in charge
M&L taking out old treatment with plaster from existing RCC roof slab / parapet / facia / chajja and cleaning of roof slab/ parapet / facia / chajja including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing memberane, complete all as specified and described as under : (a) providing screed bed / rendering or bedding layer of mortar 15mm thick in cement mortar 1:3 over roof surface finished fair and even with & including WPC as per manufacturers instructions. (b) Prepration of surface and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (c) Supply & providing APP based polymeric water proofing membrane 3mm thick of weight not less than 3.60 Kg/Sqm reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10cm overlaps as required there of, (d) applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm.(e) applying one coat of aluminium bitumen paint @ 0.30 litres/Kg on the roof/ parapet / facia / chajja , complete all as specified and directed including dismantling / taking down of existing water tank and re-fixing in same position. Note : The work of water proofing treatment shall be got executed through manufacturer or authorised applicator only.
M&L for 25mm thick cement concrete 1:2:4 type B-0, (using 12.5 mm graded stone aggregate) over roof slab finished complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.
M&L for 50mm thick cement concrete 1:2:4 type B0 using 12.50 mm graded stone agg in floor,bedding layer over roof slab laid in alternate bays,plinth protection etc and finished the top surface of concete by brooming complete all as specified and directed.
M&L for two coats of Damp proof PU Paint on plastered surfac of roof complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof padding / levelling course / over roof slab / RCC chajja / junction of parapet shed haunching, copings, benching on chajjas, roof kerbs, the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed by the Engr-in-Charge.
M&L for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) 25 mm thick as in floor finish complete all as specified and as directed .
M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors,skirting etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling complete all as specified
M&L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors skirting / dado etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified
M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 300mm x 300mm x 7mm / 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete.
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 600mm x350mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles complete all as directed.
M&L for heavy duty Skid proof vitrified coloured area of each tile not exe 0.18 sqm,10mm thick dark shed exterior grade (square/rectangular) in floor, parking, path etc, jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement morter 1:6 and dismantling of exidting floor tiling including cement morter bedding (but not backing) and rubbish off the premises complete all as specified and directed.
S&F in repair factory made 100 % solid wood plastic composite (WPC) flush type shutterof 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cilica ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc for (kitchen cabinet shutter/ drawer & cupboard etc) including SS bracket as reqd complete as per manufacture specification.
S&F in repair 18mm thick fiber reinforecment plastic (FRP) sheet of both side pre laminated colour 3mm laminated on both faces (3mm+12mm+3mm) and esges to be seald with (PVC) edges binding tape with matching colour to make cup board shutter, including bracket etc complete all as specified and as directed.
S&F in repair 6 mm thick WPC board one side prelaminated and other side plain white colour as in cup board/shelves, fixed with screws , solvent cement/ashesive complete all as specified and directed.
S & F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.
S&F hasp and staple 100mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and directed.Make : Hexa/Hettich/Hafele
S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.Make : Hexa/Hettich/Hafele
S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F in repair chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.
S&F in repair chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.
S&F in repair chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.
S&F in repair chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.
S&F in repair chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.
S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends, making good of wall surface with matching to existing surfaces complete all as speccified and directed as per approved sample complete all as specified and directed. (Make-Vista or equivalent)
Supply and fixing hollow PVC sheet wall panelling of thickness 5 mm, coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing , including PVC fillet including, removing existing unserviceable wall lining complete all as specified.
M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed.
Use and waste form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick for fair finished surfaces of concrete complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L for granite stone 16 to 18mm thick glazed (table rubbed and polished) fixed as in plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes including demolition of existing stone complete all as specified and directed.
S&F in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed.Make: Nirali modle Omate or equivalent in Prayag polymer pvt ltd and Blue star- silver shine.
Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed
M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified.
S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass all as specified.Make: Hindware,Cera,EssEss ,Prayag,Polytuf
S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.
S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.
S&F in repair Glass shelf suitable size made of 5mm thick toughned glass complete all as specified.Make: Hindware,Cera,EssEss ,Prayag,Polytuf
S&F in repairs fancy type size 450 x 600 x 5.00 mm thick or higher size looking mirror fixed to wall with mirror stainless steel nuts,complete all as specified and directed.
S&F in repairs of rubberised body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.
Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and ditected.
S & F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to walls ridge etc fixed with self tapping screws as specified.
S & F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in chajja covering etc fixed with self tapping screws including necessary scafolding complete all as specified.
S&F for Steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
S&F for mild steel joist, channel, angle, or tee section, fixed independently, without connecting plates, etc. as in fencing post conforming to Fe 410 W (gde E-250 quality B) complete all as specified and directed.
Excavation in post holes (or similar holes ) in any type of soil each n exe 0.5 cum , gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m if required and making good surface all as specified.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded aggregete as in foundation and mass concrete complete all as specified.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in any type of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
Supplying, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified.
Cutting into existing manholes/septic tank for connecting new drains 150mm bore pipe including removing existing branch drain pipes of 100/150mm bore & benching to form branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) surface finished and reforming benching as required and making good surface with plaster etc to match existing , etc complete all as specified and directed.
Removing the manholes covers (CI or RCC) any type of manholes rectangular/ circular and de-sluding /de-watering of septic tank and soakage well/main hole of any size and depth by mechanical pumping by plugging inlet as requried (5000 ltr capacity) of out of MD land and making it fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge.
Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.
Taking down chowkat with shutter (without taking off shutter from frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down chowkat with shutter any description (without taking off shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down door shutter of any description exc 1 sq. m and n exc 2 sq. each complete all as specified.
Taking down window / ventilator shutter of any description n exc 1 sqm each complete all as specified.
S & F second class hardwood (Golden Teak) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified.
S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
S&F flush shutters 35 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.Make : ECHON/Rajshree/Sintex
S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.Make : ECHON/Rajshree/Sintex
S & F 30 mm thick second class hardwood glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge. Make : “Syntex/ Rajshree Plastic wood Forex ”, ECHON.
Taking down and re-fixing the existing any type door/window/ventilator shutter in same opening after & including necessary easing/repair exc 1.00 sqm but n. exc. 2 Sqm each complete all as specified and directed.
Taking down and re-fixing the existing any type window/ventilator shutter in same opening after & including necessary easing/repair n.exc 1.00 sqm complete all as specified and directed.
S&F in repair for powder coated aluminium window alloy coated standared hollow section as mentioned below window frame (bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type with aluminium sections as per series -A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4m thick , fixed with glazing clips, rubber beading / gasket anodised beading, srew and lock type handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed.shutter Top & bottom size :37.50x15x1.60mm, shuter inner lock size 37.50x15x1.60mm, chowkhat bottom size 50.30x26x1.20mm, chowkhat top & size 50x30x26x1.00mm and making good of wall surface with matching to existing surfaces, including gril with frame fixed to by means stainless steel screws complete all as specified and directed. Make: Anodised aluminium section: Joindal/Hindalko/Indalco. Glass: Sant gobin/Modi guard/Tata.
S&F in repair for powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fitting, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old/ ventilator and making good of wall surface to match with existing surface complete all as specified and directed :- aluminium section shall be of size as given below: Frame:- 44.5x44.5mmx 1.08mm thick, Top/ botton rails and middle / side styles of shutter - 44.5x 44.5 mm x 1.08 mm thick Including Glass: 5 mm thick frodted glass fixed with rubber gasket with aluminium beading, necessary aluminium beading,wire gauge incl aluminium gril with frame fixed to by means stainless steel screws complete all as specified and directed.
S&F in repair aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Titz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat frame : 101.60x44.45x1.60mm, Shuter verticle style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm Make : (i) Anodised aluminum section : Jindal/Hindalko/Indalco (ii) Particle board : Navipan/Puratuff/Kitlam (iii) Glass : Saint gobain/Modi guard/Tata
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in brass Mortice lock, four levers vertical type, size 100mm complete all as specified and directed.
S&F 200 mm long 1st class, solid in one piece stainless steel barrel tower bolts 204 grade complete all as specified and directed by Engr-in-charge.
S&F 150 mm long, solid in one piece stainless steel barrel tower bolts gde-204, complete all as specified and directed.
S&F 150mm size solid in one piece stainless steel handles,cast D type 204 grade, fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.
S&F 125mm size solid in one piece stainless steel handles, grade-204 D type, fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.
S&F 100 mm size stainless steel butt hinges gde-204 and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.
S&F 75 mm size stainless steel butt hinges gde-204 fixed/ welded to frame complete all as directed.
S&F 250mm long stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and ditected.
S&F Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.
Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, old size straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed by Engr-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, old size straight or curved on plan to any radius in half brick thick, built in CM ( 1:4 ) complete all as specified and as directed by Engr-in-Charge.
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 10mm thick with CM (1:3) on concrete/ ceiling surfaces, finished even and smooth as in ceiling without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.
M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified
M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified
M&L for preparation of wall and applying interior grade wall care putty 1-1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla
M&L two coat oil bound distemper by roller any tint over a coat of primer on walls including preparation of old/new decorated surfaces of walls complete all as specified in SSR Part I including complete all as directed by Engr-in-charge.
M&L one coat of oil bound distemper in any tint on walls including preparation of old decorated surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge
M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1-1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. : Make : Berger/Asian/JK/Birla
M&L two coat weather coat exerior emulsion paint/ Apex ultima paint any tint over a coat of primer on walls complete all as specified in SSR Part I including complete removal of old existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.Make : Berger/Asian/Shalimar Note : The work will be carried out upto double storey builing the rate of scafolding is included for this item also.
M&L two coat of white wash on old walls surface complete all as specified and directed.
M&L one coat of white wash on old celing surface complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified.
M&L for preparation of old surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint, complete all as specified in SSR Part I and directed .
M&L for preparation of new /previously untreated surfacesof wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified in SSR Part I and directed by Engr-in-charge.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including making good the disturbed surface with cement conc. 1:2:4 and rendering to match the surface complete all as specified and directed.
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n exc 20 cm complete all as specified & directed.
S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified.
S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified.
S&F in repair 32mm dia PVC waste pipe for WHB and sink 90cm long with union,complete all as specified and directed.
S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed.
S&F in repair 15mm dia CP brass chromium plated Central hole basin mixer with accessories in wash basin for fixing hot and cold water, dcrewed down for 15mm bore GI pipe complete all as specified and directed.
S&F in repair kitchen sink mixer, CP brass, with capston heads,fency type chromium plated, screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut screwed for 15mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15 mm bore Angle cock /stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.
S&F in repair brass chromium plated ovehead shower 125 mm size with shower arm complete all as specified and directed.
S&F in repair vitreous china cascade wall hung closet pan twi- lites including cascade wall hung dual flush, casecasde ultra solid sheet cover to match shade of closet complete with fixing arrangement fancy look complete all as specified and directed.
S&F in repairs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI 'P' or 'S; trap including plastic white seet cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.
S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm dia CI 'P' trap of 60cm long.
S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified.
S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified.
S&F in repair CP steel grating 100 mm to 125mm dia round fix on floor / nahani trap with hole/without fixed with cement morter, complete all as specified.
Taking down AC/Salt glazed ware / PVC pipes and fittings upto 110mm complete all as specified.
S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls / floor/ trenches etc including tee,bend,socket,stack clamps etc complete all as specified and directed.
S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls/floor etc including tee,bend,socket,stack clamps etc complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.
M/s Pradeep Kumar
D.K. ENTERPRISES
AYUSH CONSTRUCTION COMPANY
TANUJ SAINI CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .