8747 REPAIR AND MAINTENANCE OF VARIOUS SUBMERSIBLE PUMPS, CENTRIFUGAL PUMPS, NON CLOG SEWAGE PUMPS AND VARIOUS TYPE OF CHLORINE DOZERS ALONG WITH MISC ITEMS AT AF STATION, BAREILLY

Amount

M&L for taking out submersible pumping set 41 HP capacity of any make from bore well (60m deep) connected with 7/6 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge

All as per Item No. 1 here-in-before but pumping set of 25 HP Capacity complete all as specified and as directed.

All as per Item No. 1 here-in-before but pumping set of 10 HP / 12.5 HP capacity complete all as specified and as directed.

M&L for taking out submersible pumping set 0.5/ 2 HP capacity of any make from bore well (30m deep) connected with 3 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge.

Supply & replace SS impeller suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 5 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No.5 here-in-before but for submersible pump set of 10/ 12.5 HP capacity complete all as specified and as directed.

All as per Item No.5 here-in-before but for submersible pump set of 0.5/ 2.0 HP capacity complete all as specified and as directed.

Supply & replace Coupling sleeve SS suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 9 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 9 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 9 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace SS stud with nut suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 13.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 13.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 13.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Thrust plate with bearing suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 17.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 17.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 17.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Bush GM suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 21 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 21 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 21 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Bush Rubber suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 25 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 25 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 25 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace GM neck ring suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 29.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 29.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

M&L for rewinding of submersible Motor set 41 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 32 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

All as per Item No. 32 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

All as per Item No. 32 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

M&L for taking out defective block/mono block pumping set for 60 HP capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil workshop for cleaning, scraping, painting, machine repair work, and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling installation, commissioning and testing complete all as specified and directed by Eng-in-charge. Note: (i) Repair parts of pump shall be measured & paid separately based on faults/ test report and as directed by Eng-in-charge. (ii) Rewinding of defective motor all taking out submersible pump set shall be measured & paid separately.

All as per Item No.36 here-in-before but for submersible pump set of 15 HP capacity complete all as specified and as directed.

All as per Item No.36 here-in-before but for submersible pump set of 7.5 HP capacity complete all as specified and as directed.

All as per Item No. 36 here-in-before but for submersible pump set of 0.5 / 3 HP capacity complete all as specified and as directed.

M&L for rewinding of defective Booster/ mono-block motor set of 60 HP capacity of any make and under mentioned capacity replacement of worm out parts / burn out winding. Rewinding the same with same gauge of existing wire complete and refitting the motor complete all as specified and directed by Eng-in-Charge. Note: Quoted rate shall include for cost of rewinding of motor set

All as per Item No.40 here-in-before but for submersible pump set of 15 HP capacity complete all as specified and as directed.

All as per Item No.40 here-in-before but for submersible pump set of 7.5 HP capacity complete all as specified and as directed.

All as per Item No. 40 here-in-before but for submersible pump set of 0.5 / 3 HP capacity complete all as specified and as directed.

Supply & replace Pump shaft MS suitable for 60 HP centrifugal pump set complete all as specified and as directed.

All as per Item No. 44 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No. 44 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No. 44 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Guide spinner complete with bush suitable for 60 HP centrifugal pump set complete all as specified and directed

All as per Item No.48 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.48 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.48 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Gland bush suitable for 60 HP centrifugal pump set complete all as specified and directed.

All as per Item No.52 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.52 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.52 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace CI impeller suitable for 60 HP centrifugal pump set complete all as specified and directed.

All as per Item No.56 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.56 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.56 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Coupling set suitable for 60 HP centrifugal pump set complete all as specified and directed.

All as per Item No.60 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.60 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.60 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Roller bearing and Ball bearing suitable for 60 HP centrifugal pump set complete all as specified and directed.

All as per Item No.64 here-in-before but for 15 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.64 here-in-before but for 7.5 HP centrifugal pump set complete all as specified and as directed.

All as per Item No.64 here-in-before but for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply only Orthotodoline solution in 500 ml container complete all as specified and directed.

M&L for carrying out repairs to unserviceable Chlorine granules dozing pump including replacement of unserviceable parts and testing and commissioning complete all as specified and as directed. Note: Spares required and replacement shall be measured & paid separately.

Supply & replace PVC Dosing head assembly with suction and delivery adopter with NRV for 25 LPS complete all as specified and as directed.

Supply & replace PVC NRV set with glass ball for suction and delivery adopter complete all as specified and as directed.

Supply & replace PVC Adopter for suction and delivery with out NRV complete all as specified and as directed.

Supply & replace PVC Strainer washer type heavy duty or Y type strainer for suction complete all as specified and as directed.

Supply & replace Teflon gland square type 3mm complete all as specified and as directed.

Supply & replace Chemical oil seal with cap complete all as specified and as directed.

Supply & replace Dosing agitator gear box 25 LPS complete all as specified and as directed.

Supply & replace Plunger assembly with out PVC dosing head complete all as specified and as directed.

Supply & replace Plunger assembly with PVC casing head complete all as specified and as directed.

Supply & replace Heavy duty FRP Tank capacity 150 Ltr complete all as specified and as directed.

Supply only chlorine test kit with coloured ample complete with all testing filament and OT solution in rexene box complete all as specified and as directed.

Supply and lowering of M.S column pipes heavy duty 100mm dia bore, 3.00m long each pipe with threaded ends, fixed with two Nos M.S flange on both end, including welding (both inside and outside) and drilling holes on flanges as per existing size/ grinding etc. complete all as specified and as directed.

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 200mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 150mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 100mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

M&L for CI non return valve 200mm dia with flanged end heavy duty gun metal working parts ISI marked drilled for bolts including necessary rubber gasket, nuts, bolts, washers with and including taking out existing old unserviceable/ broken / damaged CI non return valve with cutting the rusted bolts, nuts with rubber sheet complete all as specified and as directed.

M&L for CI non return valve 150mm dia with flanged end heavy duty gun metal working parts ISI marked drilled for bolts including necessary rubber gasket, nuts, bolts, washers with and including taking out existing old unserviceable/ broken / damaged CI non return valve with cutting the rusted bolts, nuts with rubber sheet complete all as specified and as directed.

M&L for CI non return valve 100mm dia with flanged end heavy duty gun metal working parts ISI marked drilled for bolts including necessary rubber gasket, nuts, bolts, washers with and including taking out existing old unserviceable/ broken / damaged CI non return valve with cutting the rusted bolts, nuts with rubber sheet complete all as specified and as directed.

S&F in repairs Direct on line starter, 3 phase suitable for submersible pump sets up to 2 HP, 415 Volt, 3 phase in the LT Panel board with suitable size of copper lugs/wire complete all as directed & specified.

S&F in repairs Direct on line starter, single phase suitable for submersible pump sets up to 2 HP, 415 Volt, Single phase in the LT Panel board with suitable size of copper lugs/wire complete all as directed & specified.

S&F power contactor MNX 9 type 415 volts heavy duty, 3 phase, suitable for star delta starter in the LT Panel board with suitable size of copper wire including taking down old unserviceable contactor complete all as specified and as directed. [Make: L&T Cat No SS90721 or equivalent in Schneider/ Siemens]

S&F Contactor TP MNX 70 including coil 230 volt complete all as specified and as directed.

S&F Contactor TP MNX 40 including coil 230 volt complete all as specified and as directed.

S&F Contactor TP MNX 25 including coil 230 volt complete all as specified and as directed.

Supply and fixing electronic timer type ET-100, 110/240 Volt, 50 Hz complete all as specified and directed.

Supply and fixing O/L relay 45 to 75 Amps 3 pole, directly operated complete all as specified and as directed.

Supply and fixing O/L relay 30 to 45 Amps 3 pole, directly operated complete all as specified and as directed.

Supply and fixing O/L relay 20 to 35 Amps 3 pole, directly operated complete all as specified and as directed.

S&F in repairs push button unit for Star delta starter of existing make complete all as directed.

Supply and replacement and testing of single phase preventer, 415 Volt AC, 50 Hz including replacement of internal copper wire connections for starter of suitable size complete all as specified and as directed.

S&F MCCB (fixed type) 415 volt, 3 pole, 30 kA, 63 Amps capacity complete all as specified and as directed.

S&F MCCB (fixed type) 415 volt, 3 pole, 30 kA, 125 Amps capacity complete all as specified and as directed.

S&F submersible copper cable flat type three core of size 16sq.mm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 10sq.mm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 6sq.mm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 2.5sq.mm complete all as directed & specified.

S&F in repairs LED phase indicator R Y B colours complete with wiring all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth at a height up to 10m and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth at a height 10 to 20m and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for taking out defective sewage pumping set centrifugal type of any make of 25 HP capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil work shop for cleaning, scraping, painting, machine repair work and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re- assembling, installation, commissioning and testing complete all as specified and directed.

M&L for rewinding of defective squirrel cage induction motor set with super enameled copper wire of same gauge as per existing of any make of capacity 25 HP by dismantling from existing pump set and disconnecting from electric panel and transporting the same to civil workshop including dismantling, checking, removal of burnt out winding including re-assembling, installation, commissioning and testing complete all as specified and directed.

Supply & replace Pump shaft MS suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Guide spinder complete with bush suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Gland bush suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace CI impeller suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Coupling set suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Roller bearing and Ball bearing suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Star rubber suitable for 25 HP centrifugal pump set complete all as specified and as directed.

Supply & replace mechanical seal magnate suitable for 25 HP centrifugal pump set complete all as specified and directed.

M&L for taking out fully submersible centrifugal non clog sewage pumping set of KSB make and of 20 HP capacity, discharge capacity 56.25 cubic metre per hours at 15 Mtr head from tank (not more than 10 mtr deep) connected with column pipe and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of faults or defects, repaired thereafter pump motor set, re- assemble the same, transported back to original location after repair / replacement of all faulty or defective parts to make the pump serviceable and installed completely at the pump house including necessary electrical and water connections, testing and commissioning complete all as specified and directed. Note: Spare parts of pump as replaced and rewinding of defective motor shall be measured and paid separately under respective items of this schedule.

M&L for rewinding of submersible centrifugal non clog sewage pumping set of make KSB of capacity 20 HP by dismantling from existing pump set and checking of all electrical and mechanical parts and replacement of worn out parts, burnt out winding, rewinding the same with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed.

Supply & fixing / replacing SS impeller suitable for 20 HP submersible centrifugal non clog sewage pumping set complete all as specified and as directed.

Supply & fixing / replacing coupling sleeve SS suitable for 20 HP submersible centrifugal non clog sewage pumping set complete all as specified and as directed.

Supply & fixing / replacing SS stud with nut suitable for 20 HP submersible centrifugal non clog sewage pumping set complete all as specified and as directed.

Supply & fixing / replacing thrust plate with bearing suitable for 20 HP submersible centrifugal non clog sewage motor complete all as specified and as directed.

Supply & fixing / replacing bush GM suitable for 20 HP submersible centrifugal non clog sewage motor complete all as specified and as directed.

Supply & fixing / replacing GM neck ring suitable for 20 HP submersible centrifugal non clog sewage pumping set complete all as specified and as directed.

M&L for taking out fully submersible irrigation pumping set of Kirloskar make and of 1.50 HP capacity, 440 volt, 3 phase pump, discharge capacity 12.5 cubic metre per hours at 40 Mtr head from tank (not more than 10 mtr deep) connected with column pipe and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of faults or defects, repaired thereafter pump motor set, re- assemble the same, transported back to original location after repair / replacement of all faulty or defective parts to make the pump serviceable and installed completely at the pump house including necessary electrical and water connections, testing and commissioning complete all as specified and directed. Note: Spare parts of pump as replaced and rewinding of defective motor shall be measured and paid separately under respective items of this schedule.

M&L for rewinding of submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP by dismantling from existing pump set and checking of all electrical and mechanical parts and replacement of worn out parts, burnt out winding, rewinding the same with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and as directed.

Supply & fixing / replacing SS impeller suitable for submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

Supply & fixing / replacing coupler sleeve SS suitable for submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

Supply & fixing / replacing SS stud with nut suitable for submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

Supply & fixing / replacing thrust plate with bearing suitable for irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

Supply & fixing / replacing bush GM suitable for submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

Supply & fixing / replacing GM neck ring suitable for submersible irrigation pumping set of make Kirloskar of capacity 1.50 HP complete all as specified and as directed.

M&L for taking out defective horizontal type centrifugal sludge disposal pump of Kirloskar make and of 3 HP capacity, discharge capacity 6 cubic metre per hours at 15 Mtr head dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil workshop for cleaning, scraping, painting, machine repair work, and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling installation, commissioning and testing complete all as specified and directed.

M&L for rewinding of defective of horizontal type centrifugal sludge disposal pump of Kirloskar make and of 3 HP by dismantling from existing pump set and including checking of all electrical and mechanical parts and replacement of worn out parts, burnt out winding, rewinding the same with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and as directed.

M&L for taking out defective horizontal type mono block centrifugal pump of Kirloskar make and of 5 HP capacity, discharge capacity 20 cubic metre per hours at 30 Mtr head by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil workshop for cleaning, scraping, painting, machine repair work, and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling installation, commissioning and testing complete all as specified and directed.

M&L for rewinding of defective motor set of Kirloskar make and of 5 HP by dismantling from existing pump set and including checking of all electrical and mechanical parts and replacement of worn out parts, burnt out winding, rewinding the same with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and as directed.

M&L for comprehensive maintenance of TEFC type motor air blower assembly with capacity 1000 cubic mtr per hour, head 6000 mm, three phase, 40 HP motor by cleaning the whole body and air filter, oiling, greasing, tightening of all nut, bolt etc if required, minor repair to compressor pump and electric motor complete all as specified and as directed.

Supply & replace air filter suitable for TEFC type motor air blower assembly with capacity 1000 cubic mtr per hour, head 6000 mm, three phase, 40 HP motor complete all as specified and as directed.

Supply & replace V Belt size No. B1922LP/B74 complete all as specified and as directed.

Supply & replace gear oil SAE-90 complete all as specified and as directed.

M&L for rewinding of defective Motor set of Kirloskar make and capacity of 40 HP by dismantling from existing air blower and including checking of all electrical and mechanical parts and replacement of worn out parts, burnt out winding, rewinding the same with same gauge of existing wire and refitting the motor complete all as specified and directed by Engr-in-Charge. Note: quoted rate shall including cost of rewinding of motor set

M&L for comprehensive maintenance of reciprocating type Air Compressor assembly with storage capacity 110 / 160 Kg single cylinder single phase 2 HP motor working pressure 10 kg per sq.cm by cleaning the whole body and air tank, oiling, greasing, tightening of all nut, bolt etc if required, minor repair to compressor pump and electric motor complete all as specified and as directed.

M&L for comprehensive maintenance of car washing machine reciprocating type single phase 2 HP motor discharge 340 LPM by cleaning the whole body and air tank, oiling, greasing, tightening of all nut, bolt etc if required, minor repair to pump and electric motor complete all as specified and as directed.

Supply and fixing Pressure gauge 0 to 10 Kg, 4" dia including gun metal ON/OFF knob complete all as specified and directed.

M&L for clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, un- wanted plants, roots and removing the rubbish up to a distance of 50 meters outside the periphery of the area under clearance complete all as specified and as directed.

M&L for collection of treated water sample from the Sewage Treatment Plant (STP) for testing of PH Value, Oil & Grease, TSS, COD, BOD, Residual Chlorine, Coli form and Dissolved oxygen analysis of Secondary treated water and Tertiary Treated water from the Govt/Authorized lab complete all as specified and as directed.

S&F MCCB (fixed type) 415 Volts, 3 Pole 25 KA, 100 Amps complete all as directed

Taking out existing unserviceable/ broken / damaged CI Butter fly valve 80 mm dia from its existing position and Supply & fixing CI Butterfly 80 mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and directed.

Material & Labour for brick masonry valve pit of internal size 120cm x 120cm x 120cm suitable for sluice valves up to 100mm size, with PCC (1:4:8) type D-2 for foundation, brick work in cement mortar (1:6), 15mm thick rendering (1:4), coping in PCC (1:2:4) type B-1, including necessary earth work, including MS sheet cover of thickness 3.15mm on (50x50)mm x6.0mm thick angle iron framework with and including two coats of synthetic enameled paint over a coat of red oxide primer with making provision of locking arrangement including demolished old valve pit complete all as specified and as shown on drawing. Drg No.- CE AF/ TD/ EM/ 01, Sheet 1/1 Dated 16.12.1997

Material & labour for repair to existing CI pipe line 150mm dia leakage by caulking of exposed lead joint including with spun yarn and lead as required including pumping out water from pit/trench complete all as specified and as directed.

Supply and fixing cast iron sluice valve PN-1.6 with flanged ends 150mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber/fiber board gasket, nuts, washers etc including taking down old unserviceable sluice valves complete all as specified and as directed.

Supply and fixing CI foot valve 150mm (6") bore in suction line conforming to IS 4038 complete all as specified and as directed.

Cleaning of Sewage Sump and septic tank of any section and depth in any situation mechanically by use of suitable means and removing the sludge, mud, silt etc manually and cleaning the sides and beam of Sewage pump and removing the same outside of defence land in covered container complete all as specified and as directed. Note :- The contractor shall take all necessary precaution measures, Equipment as required and applicable for working in foul condition complete all as specified and directed.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 20 of tender document i.e. Rs. 31,857.00

Mukesh Enterprises

SHRI SIDHI VINAYAK INFRASTRUCTURE DEVELOPERS