Annual Plan 2024-25 Koduvally municipality Project No 187/25 Drinking water supply schemes installing motors Pratheeksha Kacherikkunnu Varuvinkala Electrification General Electrical Work

Amount

SITC pump set and Electrification

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.7:Supply and providing copper earth bus in the panel board

90.14.24.17:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.14.24.18:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.10.2:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

OD234728/2024-2025:Supply and providing 2x25x3 mm G I strip as test joint on the existing watering pipe of earthing including bending and giving connections

OD234731/2024-2025:Supply and providing 25x6mm brass nut and bolt etc. as required.

OD237140/2024-2025:Supply and fixing63A HRCfuse with HRC fuse link with connection in existing meter board

OD234734/2024-2025:Supply and fixing 63A Bakelite fuse holder with necessary bolt and nuts etc. as required

OD234744/2024-2025: Supply and providing 2-32A offset staggered fuse link

OD234745/2024-2025:Supply and providing 32A HRC fuseholder with suitable nut,bolt etc.

OD234743/2024-2025:supply and providing 5/7W LED bulb on existing lamp holder

OD236017/2024-2025:Supply and providing 200 mm plastic shade on the existing holder as required

OD236021/2024-2025:Supply and providing 63 A 2 way neutral link on existing meter board using suitable nut , bolt etc. as required.

OD234741/2024-2025:Supply and providing 32A 2 way neutral link on exsisting meter board using suitable nut,bolt etc. as required.

OD234727/2024-2025:Supply and fixing 50mm (2") GI flange in the existing suction/delivery pipe line using required leak proofing materials etc. as required

OD234735/2024-2025:Supply and fixing clamp made with 50x6mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well

OD234737/2024-2025:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well

OD234726/2024-2025:Supply and fixing 50mm 80 Sch ASTM Threaded Adaptor Male

OD234729/2024-2025:Supply and fixing 50mm 80Sch ASTM bend

OD234723/2024-2025:Supply, laying and fitting 50 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site,

OD234740/2024-2025:Supply and fixing 50mm ASTM socket 80 Sch

OD234738/2024-2025: Supply and fixing 50mm GM Non Return valve in the existing ASTM/GI pipe

OD236015/2024-2025:Supply and fixing 12mm nylone rope

OD236016/2024-2025:Supply and fixing 12mm Stainless steel rope

OD236012/2024-2025:Supply and fixing63mm-50mm PVC reducer

OD234733/2024-2025:Supply and fixing pump controller suitable for 3 Phase 7.5 HP Open well submersible motor pump set complete with fully automatic star delta starter, single phasing preventer, ON OFF indication lamps, push buttons, volt meter and ammeter etc. in sheet steel enclosure duly wired in the existing panel board and giving connection etc. as required. LT LK make MU-G10 H FASD or equivalent

OD235740/2024-2025:Supply & fixing pump controller for 3 phase 5HP open well submersible pump set complete with fully automatic star delta starter, single phasing preventer, ON& OFF indication lamps, push buttons, volt meter & ammeter etc, in sheet steel enclosure duly wired in the existing panel board and giving connection etc. as required. LT LK make MU-G10 DOL starter. or equivalent.

OD234742/2024-2025:Supply, installation, testing and commissioning of 7.5HP 6 stage open well vertical submersible motor pump set (EKKI DECCAN 7DXM/6 or equivalent) with MAX head 128 Mtr and discharge of 10500 LPH at 103 Mtr, 50mm out let using suitable type tools plants including giving necessary connections as required

OD235248/2024-2025:Supply, Installation, Testing & Commissioning of 5HP-6 stage open well submersible vertical motor pump set (EKKI DECCAN 5DX/6 or equivalent) with max head 116 meter and discharge of 13500 LPH at 70 meter, 50mm outlet using suitable type tools & plants Including giving necessary connections etc as required.

OD235355/2024-2025:Supply, Installation Testing & Commissioning of 5HP-3 stage submersible open well vertical motor pump set (EKKI DECCAN 5DE/3 or equivalent) with max head 60 meter and discharge of 22000 LPH at 50 meter, 50mm outlet using suitable type tools & plants Including giving necessary connections etc as required.

OD236011/2024-2025:Dismanling and removing the existing old damaged and rusted meter board including main switch. handing over the same to muncipal/Panchayath authorities. make good the wall including Plastering and Painting

OD236013/2024-2025:Supply and fixingRED,YELLOW,BLUE LED Indicator AC/DC as required

OD236014/2024-2025:Supply and Fixing Aluminium anodised danger Board of size200*150mm with incription both English and Malayalam and cconventional sympols

OD236020/2024-2025:Supply and providing suitable iron hook grouted on wall for binding the service wire.

OD234730/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board size 650x350x170mm (6535)to fix KSEB meters, fuse units, CT inciuding necessary B&N, rubber bushes etc.as required including fixing it on wall, making good the damages colour washing etc. as required.

OD236254/2024-2025:Charges for preparation and submission of application for availing single/three phase KSEB service connection with necessary sketch, test and completion report, stamp fee etc, including necessary liaison work as required.

BHOOPESH T K (BID ID -1989456)

JITHESH K (BID ID -1990055)

SHAJI P (BID ID -1989482)

Bidder Name

SHAJI C

SHAJI P

BHOOPESH T K

JITHESH K