Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-Finance | L1 | Accepted-Finance L1 Accepted | |
| 2 | L2₹2.3 L+₹25,974.80 (13.0%)Accepted-Finance | L2 | Accepted-Finance L2 Accepted | |
| 3 | L3₹2.3 L+₹27,375.62 (13.7%)Accepted-Finance PWD CONTRACTOR PADINHARAYIL HOUSE KODANGAD KONDOTTY MALAPPURAM 673638 | MALAPPURAM | KERALA | 673638 | L3 | Accepted-Finance L3 Accepted |
| Sl No | Description | Qty | Unit | KK MOHAMMED SALIM L2 | P P Musthafa L1 | JAFAR K K L3 |
|---|---|---|---|---|---|---|
| 1.00Detailed Estimate | ||||||
| 1.00 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 11 | each | 380 ₹4,180 | 338.97 ₹3,728.67 Lowest | 386 ₹4,246 |
| 1.00 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 2.75 | sqm | 75 ₹206.25 | 67.75 ₹186.31 Lowest | 77 ₹211.75 |
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 4.8 | cum | 2,100 ₹10,082.1 | 1,902.11 ₹9,132.03 Lowest | 2,145 ₹10,298.15 |
| 1.00 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. | 3.58 | cum | 7,600 ₹27,170 | 6,715.2 ₹24,006.84 Lowest | 7,654 ₹27,363.05 |
| 1.00 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.21 | cum | 12,900 ₹2,709 | 11,406.53 ₹2,395.37 Lowest | 12,932 ₹2,715.72 |
| 1.01 | 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 21 | kg | 113 ₹2,373 | 100.4 ₹2,108.4 Lowest | 114 ₹2,394 |
| 1.01 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 2.25 | sqm | 770 ₹1,732.5 | 681.31 ₹1,532.95 Lowest | 775 ₹1,743.75 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 55.63 | sqm | 370 ₹20,583.84 | 330.22 ₹18,370.8 Lowest | 372 ₹20,695.1 |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 90.22 | kg | 590 ₹53,229.8 | 522.2 ₹47,112.88 Lowest | 592 ₹53,410.24 |
Tender Value
Refer Docs
EMD Value
₹5,156
Closing Date
18 Feb 2026, 2:00 pmClosed
Assistant Executive Engineer
Asst Exe Engineer PWD(B) SD Parappanangadi
GENERAL-Govt. Arts and Science College Kondotty-Minor Alteration works at Kondotty Govt. Arts and Science College Main Block Building
2026_PWD_834936_1
D5/PWD5/BLDG/TR/11731/2025 Dtd.08.02.2026
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kondotty Govt. Arts and Science College
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
₹5,156
24 Sept 2026
9 Feb 2026
20 Feb 2026
9 Feb 2026
18 Feb 2026
9 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Detailed Estimate | |||||
| 1.001 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 11 | each | - | - |
| 1.002 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 2.75 | sqm | - | - |
| 1.003 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 4.8 | cum | - | - |
| 1.004 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. | 3.58 | cum | - | - |
| 1.005 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.21 | cum | - | - |
| 1.006 | 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 21 | kg | - | - |
| 1.007 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 2.25 | sqm | - | - |
| 1.008 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 55.63 | sqm | - | - |
| 1.009 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 90.22 | kg | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1404647.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1404647.xls
BOQ • 0.31 MB
artscollegesbd.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .