Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹9.7 L+₹13,618.66 (1.43%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹9.7 L+₹14,135.08 (1.48%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹9.7 L+₹14,544.19 (1.53%)Rejected-Finance ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹9.7 L+₹15,001.33 (1.57%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.6 L
EMD Value
₹19,100
Closing Date
22 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF 01 X GUARD ROOM WITH ELECTRIFICATION NEAR RP GATE OF FD REGT AT MIL STN AGARTALA
2022_MES_568198_2
8303/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,100
Yes
28 Feb 2023
4 Feb 2023
24 Feb 2023
4 Feb 2023
22 Feb 2023
8 Feb 2023
Amount
Schedule'A' Part-I: B&R works
Surfce excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dence soil.
Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan
Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil
M & L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete.
Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.
M and L for half brick thick brick work sub class 'B' brick straight or curved on plan to any radius in CM 1:4 complete all as specified and directed .
Returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete.
Removing excavated material exc 250 Mtrs but n exc 500 Mtrs and depositing where directed by Engineer-in-Charge.
M & L for RCC type B-1 (1:2:4) using 20mm graded agregate in beams, cantilevers, bressummers, lintels over 1.5m span
M&L RCC type B-1 (1:2:4) using 20 mm grades aggregate in slab, supported on walls beams and columns in floors roofs landings
M&L TMT bars of 10mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
M and L for TMT bar 6 to 8mm dia as in stirrups, spacers and binders
M&L for rough finished surfaces of concrete flat formwork to sides and soffits of floor or roof beams, lintels, cantilevers shelves etc
M & L hard core of broken stone boulders to gauge n exc 63 mm all as spd and directed by Engineer-in-charge.
M&L for sand filling under floor including watering and consolidationcomplete all as spd and directed
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm brick aggregate) as in sub-base, to floor and foothpath etc complete all as specified and directed
M and L for 75 mm thick PCC 1:2:4 type B-2 40mm graded agg in plinth protection
M&L for 15 mm thick rendering in CM 1:4 in finishing the surface even and smooth without using extra cement.
M&L for 15mm thick plaster on fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as spd.
M&L for preparation of old/ new plastered surfaces of walls and applying two coats of cement base paint and over one coat of alkali resistent priming paint complete all as specified and directed.
Matereal and Labour for preparation of new wall surfaces and apply 1mm thick POP on wall surface to make surfaces even and smoonth thereafter apply two coat of oil bond distember on wall.
M & L for 5 mm thick rendering in CM (1:4) on fair face of concrete surfaces as in ceiling etc finished even and smooth without using extra cement.
M and L for 02 coats of white wash on ceiling incl prep of surfaces
M and L for pressed steel frames for of size 125 x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
S & F 35 mm II nd class hard wood plain framed ,panelled shutters (any numbers of panells), with panells of timber flat on both sides (feather edged ) or of veneered particle board medium dencity , wood particle with commercial face veneers : supplied and fitted to chowkats.
S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.24 (a) supplied and fitted to chowkats complete.
Supply and fix galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples.
M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width orgirth
S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.
S&F 200mm long aluminium anodized barrel tower bolts of extruded section.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodized.
M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165
S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.
M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.
M&L for PCC 1:2:4 type B1 (20 mm graded stone aggregate) for fixing hold fasts.
S&F steel windows with side hung shutters including projecting type hinges with steel handle ,and steel peg stay, complete with glazing bars,dovetailed or welded .
All as per item No 36 above but without glazing bars .
S&F Steel ventilator with top hung shutter including hinges,steel peg stay complete all as directed.
S & F 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane
M&L mild steel work such as grills ,guard bars etc and similar work conforming to Fe290 GDE E-165
M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F mild steel framed work such as grills grating etc with and soft bars shouldrs of riveted or forged into spikes, framed guard bars and similar work all as spd made of 12mm square bars.
S&F floors door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors 150 mm all as spd and directed.
M and L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed in CM 1:6 complete all as specified
M and L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item No 45 above.
M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:4
M and L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match embeded over 10 thick screed plaster in CM 1:4
S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet.
S&F Factory made solid PVC moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing
S&F in repairs viterious China squatting pan" Orissa Pattern" size 580x440mm white with integral foot rest including provision of lime concrete bedding including P or S trap set in, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding flushing cistern and flush pipe)
S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes
S&F pvc connector 15mm size with PTMT nuts of length 600mm .
S and F 15 mm bore bib tap CP brass all as spd and directed by Engr-in-Charge
S&F in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S and F Vitreous China wash basin, white, flat back, size 550x400mm including fixing bracket , CP waste couping , and waste pipe , front pedestral complete all spd Make - Cera or equivalent make as decided by Engr-in-Charge
S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.
Soap dish, any type, fixed to plugs with chromium plated brass screws
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs. Make - Cera/Prayag or Equivalent as decided by Engineer -in-Charge.
Supply and fix in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed .
S&F in repair 20mm bore ball brass valve high pressure with polythene float & fly nut compelete screwed for iron pipe or brass ferrule.
S&F Vitreous China urinals of size 465X355X265mm bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 securing urinal to plugs with and including 60 mm long brass screws, poniting around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and fixed in repairs
Supply only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern
S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S & F 110 mm PVC (SWR) bends any radius complete all as specified.
S & F75 mm PVC (SWR) bends any radius complete all as specified.
S F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.
S & F 75 mm PVC (SWR) vent cowl
PVC (SWR) gully trap or floor trap 125/110 mm, setting and jointing with solvent cement
M&L 15mm bore tubes medium grade with all fittings and fixed on walls and ceiling or laid in floors.
S & F Rotational moulded polye?thylene water storage tanks 1000 LTR capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
M&L for rolled mild steel as in roof trusses ( framed) trussed , purlins , crane gamtries, rail,and fastening and heavy brackets framing ( Beam, tee, angle , channel or flat sections ) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E250)quality-B complete all as specified
S and F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specification .
S and F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M & L 4mm thick non asbestos cement plain building boards, fixed to MS framework with screws.
S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed the other or screwed both end, each screwed end to be fitted with washers and one hexagonal or square nut, having 5-10mm dia and 5-10 cm in length all as specified and directed
Schedule'A' Part-I: E & M works
Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.
One light / Fan / Bell Point controlled by one way switch 5 Amp.
One 3 pin 5 Amp socket out let controlled by one switch on same board.
One 3 pin 5 Amp socket out let controlled by one switch on independent board.
Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5/6 Amp, 240 Volts complete all as specified & directed.
Supply and fixing switch socket combination 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed.
Supply and fixing switch socket combination, 2 in 1, 5/6 pin, 15 Amp, flush type (ISI marked) complete controlled by one switch complete all as specified and directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply and fixing fan regulator 100/120 watt step type AC 220 volts complete all as specified and as directed
S&F lamp Holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.
Supply and fixing of LED Adore 1 x 9 watt, 825 lumen output, B-22 CDL, Ball lamp (pin type), 230 volt, PF not less than 0.85 (min) incl. complete all as specified and directed.
S &F Miniature circuit breaker single pole and neutral 32 Amps, 230 volt, 10 KA, C-curve all as specified and directed.
S & F repairs MCB, single pole 'C' curve having breaking capacity 10 KA, 6 to 32 Amps, 240 volts, complete all as specified and directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cabl of suitable size complete in all respect all as specified and directed
Supply and fixing LED lights fitting 1 x 20 W, 220V, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, all as specified and directed.
Supply and fixing LED light fitting 1 x 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
S & F as in replacement LED building security light 25 watt, 230 V, 3000 Lumen output complete, IP 66 with all accessories and including connecting upt to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20 mm dia braket of total length 120 cm and fixed to wall with 2 Nos MS clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 240 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
Supply and fixing Exhaust Fan, steel body AC single Phase, 230 volt of size 300 mm sweep with blades and frame and louvers complete all as specified and directed.
Supply & Fixing sheet metal enclosure with single door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt . all as specified and directed.
M&L earthing complete with galvanised iron earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) connected to galvanized iron strip 25x4 mm as earthing lead by means of nut, bolts and washers, steel pipe of 25 mm bore light grade for protecting of earth lead with PCC chamber (1:2:4) type B1 using 20 mm graded stone aggregate internal surface of concrete chamber shall be given 10 mm thick plaster in CM (1:4), funnel with wire mesh, 50 mm thick cover RCC (1:2:4) type B1 using 20 graded aggregate reinforcement with 8 mm dia MS bar at 80 mm centre to centre both way and incl charcoal dust and common salt all as shown in electrical Plate No. 3 SSR Part-I as specified incl necessary excavation and earth work and connecting the earth to earth test point including testing complete.
Material, labour & laying of heavy uty armoured, XLPE, LT under ground cable of size 10 Sqmm, 2 Core 1100 V grade, PVC insulated, PVC sheathed, multi stranded aluminium cable of following size in pipe/ trench/ cable duct/ fixed on wall by proper size shaped GI clamps with nut bolts etc including lugs for both ens and making good the disturbed surfaces complete all as specified and directed.
Material & labour in replacement of tubes of size 40 mm bore light grade galvanized with all fittings laid in trenches/ wall/ pole through MS flat (25 x 3 mm), nut, bolt & washers [as reqd] of proper sizes complete for protecting cable complete all as specified and directed.
Supply and laying brunt brick sub class 'B' bricks in trenches on cable as cable protecting across the length of the cable (width wise) complete all as specified and as directed.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/s Amrit Gope
M/S PAUL ENTERPRISE
M/S SWAPAN DEBNATH
M/S New Saha Enterprise
SHRI CHANDAN CHANDA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .