Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.6 LAccepted-AOC DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-1 | Accepted-AOC Being L1 | |
| 2 | L-2₹22.0 L+₹2.8 L (14.8%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-2 | Rejected-Finance Being L 2 | |
| 3 | L-3₹25.5 L+₹6.3 L (33.1%)Rejected-Finance | L-3 | Rejected-Finance Being L 3 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Nov 2021, 6:00 pmClosed
GE North Binnaguri
Post Binnaguri Dist Jalpaiguri West Bengal
REPAIR AND MAINTENANCE OF MAP FURNITURES INCLUDING PAINTING POLISHING AT BINNAGURI UNDER GE NORTH BINNAGURI
2021_MES_482722_1
NIT No. 8701/ 61 /2021-2022/ 02 / E8
Open Tender
Miscellaneous Works
Item Rate
270 days
BINNAGURI
Class D Category a i
8 documents required · 8 mandatory
₹500
Yes
GE North Binnaguri
₹60,000
Yes
13 Dec 2021
20 Oct 2021
15 Nov 2021
20 Oct 2021
13 Nov 2021
1 Nov 2021
Amount
Repair of Almirah steel large with shelves as appended below : Taking down existing unserviceable botton leg (left/right) from its position and supply and fixed new bottom leg of size 450 mm x 80 mm x 100 mm made out of 1mm Mild steel and applying two coatss of Synthetic enamel paint (1 st quality) OG over a coat of red oxide zinc chrome primer complete all as specified shown on drawing. ( DRAWING No. FD/E6/MAP/18)
Material and labour for taking out loose leg (right/left) from its position and re-fixing the same in existing position with necessary run welding of Almirah large complete all as directed. (Note : Thickness of metal to be welded shall not exceed 2mm)
Taking out loose shelf from its position of Almirah large steel and re-fixing the same rigidly after minor repairs by providing new clips, nuts & bolts of existing size as required complete all as directed.
Material and labour for running welding in repairs to broken/damaged sides (left/right), back and top of almirah steel large complete all as directed. (Note : Thickness of materials to be welded not exceeding 2mm in thickness and length of each welding exceeding 9mm but not exceeding 20mm in length)
Material and labour for repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as directed
Taking out and removing existing unserviceable damaged lock from its position of almirah (large steel) and Supply and fixed new 6 lever steel lock as per existing shape and size as approved with keys in duplicate complete all as specified. Make :Link/Godrej/Standard/Aligarh
Taking out and removing old unserviceable handle from its position of Almirah steel large and supply and fixed steel chromium plated handle 125mm long of existing shape and size as approved complete all as directed and shown on drawing.
Taking down existing unserviceable door shutter from its position and supply and fixed new door shutter made out of 1mm Mild steel and applying two coatss of Synthetic enamel paint (1 st quality) OG over a coat of red oxide zinc chrome primer complete all as specified shown on drawing.
Taking down existing unserviceable bottom shelve from its position and supply and fixed new shelve made out of 1mm Mild steel and applying two coatss of Synthetic enamel paint (1 st quality) OG over a coat of red oxide zinc chrome primer complete all as specified shown on drawing.
Taking down existing unserviceable intermediate shelve from its position and supply and fixed new shelve made out of 1mm Mild steel and applying two coatss of Synthetic enamel paint (1 st quality) OG over a coat of red oxide zinc chrome primer complete all as specified shown on drawing.
Taking down existing unserviceable door shutter from its position and supply and fixed new door shutter made out of 1mm Mild steel area not exceeding 100 Sqcm each and applying two coatss of Synthetic enamel paint (1 st quality) OG over a coat of red oxide zinc chrome primer complete all as specified shown on drawing.
Repairs to Peg Table for the following :- Removing old unserviceable fitting and fixture of Pag table without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st Class Hard wood wellseasoned (TEAK) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 384)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1 st class hardwood (teak) beading around the edging.
Long rails (Right/ Left)
Short rails (Right/ Left)
Repairs to Teapoy for the following :- Removing old unserviceable fitting and fixture of Teapoy without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood well seasoned (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 382)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (teak) beading around the edging.
Long rails (Right/ Left)
Short rails (Right/ Left)
Repairs to Table Centre for the following :- Removing old unserviceable fitting and fixture of Table centre without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 274)
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class haedwood beading around the edging.
Long rails
Side rails
Repairs to Table dining 6 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 6 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : MAP/II/ 03)
Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.
Long rail
Side rails
Repairs to Table Writing for the following :- Removing old unserviceable fitting and fixture of Table Writing without disturbing to the other parts such as legs,rails, top,stiffiners,Drawer etc and supply and fixing with new items of Best quality 1st class hardwood well seasoned (Teak) and 4mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 275
Long rail
Side rails
Bottom Stiffeners
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Sides of size 600mm x 560mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
Shutter of size 450mm x 350mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges
Back 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.
Shelve of cupboard 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.
25 mm dia chroumium plated Knob with brass nuts and bolts
Taking out drawer from existing position and refixing the same after minor reppair like tighting thr screw wooden pin complete all as specified.
Taking out old damaged / decayed tapestray cloth and supply and fixed with new with superior quality tapestry cloth of approved colour, taxture and quality as per existing shape complete all as directed. ( DRAWING No. FD/E6/MAP/18) (Note : The cost of tapestry cloth should be min of Rs. 275/- per mtr).
Repairs to Table Bed side for the following :- Removing old unserviceable fitting and fixture of Table bed side without disturbing to the other parts such as top,legs,side, etc and supply and fixing with new items with 2nd class hardwood (Kalasiris) and 4mm thick wooden beading whereever required and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : E6/MAP/15(R))
Stiffeners
Top/ bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.
Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.
Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging.
Bottom 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick timber beading around the edging complete all as specified and as directed.
Repairs to Side board for the following :- Removing old unserviceable fitting and fixture of side board without disturbing to the other parts such as top,legs,side, top,drawers etc and supply and fixing with new items with 1st class hardwood (teak) and 4mm thick 1st class hardwood beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 1112)
Long rail of bottom
Short rail of bottom
Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (Teak) beading around the edging.
Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.
Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Shutter 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging. with one knob 25mm dia complete all as specified and as directed.
Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging. complete all as specified and as directed.
Drawer 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging with one knob 25mm dia complete all as specified and as directed.
Inside partition 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging with one knob 25mm dia complete all as specified and as directed.
Bottom 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick timber beading around the edging complete all as specified and as directed.
Teakwood shaded knob 25mm dia
Repairs to Bin linen multipurpose for the following :- Removing old unserviceable fitting and fixture of Bin linen such as top, bottom, front /back side,legs etc and fixing with new 1st class hardwood (Teak) , 6 mm thick teakwood face plywood with 4 mm thick wooden beading whereever required all as directed and minor repair as per required applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: E6/MAP/09)
Top 1st class harwood well seasoned (Teak)
Bottom 1st class harwood well seasoned (Teak)
Legs 1st class harwood well seasoned (Teak)
Back side Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989
Repairs to Hat stand with mirror for the following :- Removing old unserviceable fitting and fixture of Hat stand with mirror without disturbing to the other parts such as Particle Board,matel peg,mirror etc and supply and fixing with new items of Best quality and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 233)
Base of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Brass peg 120 mm long
Mirror 5 mm thick electro copper plated of size 300mm x 460 mm (Modi/Atul Saint Gobbin )
Repairs to Chair dining for the following :- Removing old unserviceable fitting and fixture of Chair dining without disturbing to the other parts such as legs,rails, stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD MAP/ II/05)
Rear legs 1st class hardwood (TeaK)
Front legs.1st class hardwood (TeaK)
Front / side rails of seat frame . 1st class hardwood (TeaK)
Back batten 1st class hardwood (TeaK)
Leg Stiffener 1st class hardwood (TeaK)
Taking out and removing all unserviceable wornout PVC seat frame of Chair Dining JCOs/ ORs and supply anf fixed new Seat frame complete all as specidied and shown in drawing.
Repairs to Table dining 4 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 8 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : MAP/ 03)
Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.
Legs 1st class hardwood well seasoned (TeaK)
Long rail 1st class hardwood well seasoned (TeaK)
Short rails 1st class hardwood well seasoned (TeaK)
Taking out old existing damaged / broken seat frame of chair verandah and refixing the same with new seat frame complete all as specified and as shown in drawing. (Make of seat frame : AMKO or equivalent as approved by GE). ( DRAWING No. FD/MAP/II/15)
Taking out old existing damaged / broken back frame of chair verandah and supply and fixed with new back frame complete all as specified and as shown in drawing. (Make of seat frame : AMKO or equivalent as approved by GE). ( DRAWING No. FD/MAP/II/15)
Material and labour for spot welding in repairs not exc 2.50cm in length of broken steel frame of chair verandah complete all as specified and as shown in drawing. (Note : Material to be weled not to exceeding 2.00mm in thickness)
Material and labour for spot welding in repairs not exc 2.50cm in length of broken steel frame of shoe rack steel complete all as specified and as shown in drawing.(Note : Material to be weled not to exceeding 2.00mm in thickness) ( DRAWING No. FD/E6/MAP/2(R)
Repairs to Table dressing Gents with Mirror (Drawing NO FD/E6/MAP/16) Mirror 5 mm thick electro copper plated of existing size and shape including 1st class well seasoned teak wood beading (Modi/Atul Saint Gobbin )
Removing of old existing unserviceable plywood top from charpoy IP Hard Top MS squre pipe , tightening the frame including welding whereever required and Supply and fixing new plywood 12mm thick BWR, ISI marked, conforming to IS: 303-1989 (size Approx 1950 mm x 900 mm) with MS cleat and stiffener screw and cup washer all as spacified and directed. ( DRAWING No. FD/MAP/II/ 01)
Supply and fixing in repairs Stiffener of size 25mm x 25mm MS square tube1.5 mm wall thickness including necessary welding as per existing and as shown in drawing all as spacified and directed. ( DRAWING No. FD/MAP/II/ 01)
Material and labour for spot welding in repairs not exc 2.50cm in length of broken steel frame of chair school complete all as specified and as shown in drawing. (Note : Material to be weled not to exceeding 2.00mm in thickness)
Taking out old existing damaged / broken seat frame (PVC) of chair school and Supply and fixed with new seat frame (PVC) complete all as specified and as shown in drawing. (Make of seat frame : AMKO or equivalent as approved by GE). ( DRAWING No. FD/E6/MAP/05)
Repairs to Bed Hard Ply top for the following :- Removing old unserviceable fitting and fixture of Bed Hard plywood top such as head board, Foot Board, Long Rail, sttiffner, plywood etc and supply and refixing with new items of Best quality 2nd Class HW (Hollock/Tita Champa) and minor repair applying French Polish glossy finished to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD/MAP/8(R)
Top Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 12mm thick, 7 No ply, ISI marked conforming to IS: 303-1989
Head board 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Foot board. 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.
Material and labour for preparing & polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed for the following wooden furniture:-
Sofa set 5 (Five) Seater only (Drawing No. FD- 373, FD/MAP/II/02, FD-258)
Sofa Set 4 (2+1+1) seater Wooden (Drawing No. FD-281, FD-18 & FD/MAP/II/02)
Bed Ply wood Top (Escept plywood) (Drawing No. FD- 246 M)
Bin Solid Lenin Large/ Small (Drawing No. FD- 244)
Book Case Large/ Small (Drawing No. FD-237 M)
Chair Dining (Drawing No. FD-16/279/FD/ MAP/II/05)
Chair Easy (Drawing No. FD-17/229)
Chair Writing (Drawing No. FD- 280)
Table Dining 6/8 Persons (Drawing No. FD- 273)
Peg Table (Drawing No. FD- 277/384)
Side Board (Drawing No. FD- 26/241/ 1112)
Stool dressing CB /Modified (Drawing No. FD- 27/282)
Table bed side (Drawing No. FD- 248)
Table dressing gents with mirror (Drawing No. FD- 31/230)
Table dressing ladies (Drawing No. FD- 33/249/251 and FD/MAP/II/07)
Table Writing (Drawing No. FD- 33/249 )
Teapoy (Drawing No. FD- 278)
Teapoy (Drawing No. FD- 382)
Hat stand with Mirror (Drawing No. FD- 206/233)
Table large 900 mm x 900 mm x 760mm (Drawing No. FD- 291)
Table 900 mm x 600 mm x 760mm' with drawer (Drawing No. FD- 224/283)
Table 900 mm x 600 mm x 760mm with out drawer (Drawing No. FD- 223/284)
Rack Side 3 Space (Drawing No. WDF- 27)
Chair Wooden Bottom (Drawing No. FD- 225)
Almirah mess utencial (Drawing No. FD- 93(M)
Table Office Officer Wooden (Drawing No. FD- 84)
Foam with Back (Drawing No. FD-1027)
Foam without Back (Drawing No. FD-1027)
Table Centre (Drawing No. FD- 274)
Table Dining 6 persons (Drawing No. FD- MAP/II/03)
Table Writing (Drawing No. FD- 275)
Table bed side (Drawing No. FD- E6/MAP/15(R))
Bin Lenin Multipurpose (Drawing No. FD- E6/MAP/09)
Table Dining 4 persons (Drawing No. FD- MAP/03)
Table dressing gents with mirror (Drawing No. FD- E6/MAP/16)
Removing dents, bends welding to broken portion rectifying all minor defects and repairs. Material and labour for preparation of steel surface (inside & outside surface) including doors shelves and legs, applying synthetic enamel paint (1st quality) over a coat of red oxide primer Zinc chrome primer by spray paint machine complete all as specified specified and shown on drawing for following:-
Almirah Large Steel (Drawing No. FD/E6/MAP/18)
Chair Writing (Drawing No. FD/E6/MAP/12)
Chair Verandah (Drawing No. FD/MAP-II/15)
Rack Shoe Steel (Drawing No. FD/E6/MAP-II/2(R)
Charpoy IP with Head Top (Drawing No. FD/MAP-II/01
Chair School (Drawing No. FD/E6/MAP/05)
Removing of old PVC shoe from various Type of Tables such as Table Writing, table 3'x2' with /witout drawer, Table 3'x3', table 2'x2' Table office Clerk, table dining 6/8 person, Sofa set etc. and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified an das directed.
Removing of old PVC shoe/ Cap from various Type of Chairs such as Chair dining, Chair Writing, Chair Easy, Chair WB,Chaier CB etc.and replacing the same with new 20 mm dia and 10 mm high be screwed to bottom of legs all as specified an das directed.
samrat saw mill and joinery workshop
M/S S.K. CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .