Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹29.7 L+₹1.4 L (5.06%)Accepted-AOC HIMACHAL PRADESH HP | KANGRA | HIMACHAL PRADESH | 176093 | L2 | Accepted-AOC Accepted | |
| 3 | L3₹29.8 L+₹1.5 L (5.26%)Accepted-AOC HIMACHAL PRADESH HP | L3 | Accepted-AOC Accepted | |
| 4 | L4₹29.9 L+₹1.6 L (5.62%)Accepted-AOC VILL FAGOG P O BALOH TEHSIL JHANDUTTA DISTT BILASPUR HP | L4 | Accepted-AOC Accepted | |
| 5 | L5₹34.4 L+₹6.1 L (21.5%)Accepted-AOC | L5 | Accepted-AOC Accepted |
Tender Value
Refer Docs
EMD Value
₹73,400
Closing Date
28 Jun 2021, 3:00 pmClosed
Deputy Director of Agriculture Bilaspur (HP)
Deputy Director of Agriculture Bilaspur (HP)
Addition and alteration/renovation work in kisan bhawan Bilaspur,District Bilaspur H.P.
2021_DoA_48731_1
826-27 dated 02.06.2021
Open Tender
Civil Works
Item Rate
180 days
Bilaspur
Refer in SBD
8 documents required · 8 mandatory
₹1,500
Deputy Director of Agriculture Bilaspur (HP)
₹73,400
28 Jul 2021
18 Jun 2021
28 Jun 2021
18 Jun 2021
28 Jun 2021
18 Jun 2021
Amount
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm. measured at a height of 1 metre above ground and removal of rubbish up to a distance of 20 metres outside the periphery of the area cleared:Up to 30 cm. girth: ( 0711)
Repairs to plaster in patches of 2.50 M2 and under and 10 to 15 mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within alead of 20 metres with:in CM 1:4 (1 cement:4 sand ( 182104)
Removing dry or oil bound distemper by washing and sand papering the wall surface smooth including necessary repairs to scratches complete.( 1716).
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture of and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.(1717)
Distempering (one coats) with oil bound washable distemper of approved brand and manufacture of and of required shade on decorated wall surfaces to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth. (Item No. 17172).
Extra over Item No. 4 & 5 for every subsequent coat of distempering with oil bound washable distemper of approved brand and manufacture.( 17173)
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or equivalent on decorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete.(16104)
Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc. Complete and stacking them within 20 metres lead. (204801)(a)Not exceeding 3 sq.M. in area204802.
Exceeding 3 Sq.M. in area 204802
Taking out doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters i/c chowkhats. not exceeding 3 sq.M. in area (204901)Exceeding 3 sq.M. in area. (204902)(b)
Exceeding 3 Sq.M in area (204902)(B)
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position:-In Sal wood:- ( 1200109).
Providing and fixing paneled glazed or paneled and glazed shutter for doors windows and clerestory windows, including black enameled iron but hinges with necessary screws: 40 mm thick in 2nd class D/dar wood (120050304)
Providing and fixing wire gauge shutter using galvanized M.S. wire gauge of I.S. gauge designation 85 G. with wire dia of 0.56 mm for doors, windows and clerestory windows including bright finished black enameled iron hinges with necessary screws.(120190104) 2nd class deodar wood.
Supplying and fixing glass panes with putty and nails including removal of broken glass wherever necessary: ( 18260103) 3MM Thick
Supplying and fixing new wooden beads (Fillets) wherever necessary:(181201)
Applying priming coat over new steel & other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.With ready mixed priming paint brushing red lead, red oxide /zincOxide chrome. (16002010)
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters:-(1600502) Enamel paint other than white.
Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter:-( 1600702) With enamel paint other than white.
Extra over Item No. 16 & 17 for every subsequent coat of paint:Enamel paint other than whiteItem No. 1600900
Applying priming coat over new wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting;Ready mixed paint brushing wood primer pink. ( 16036020)
Painting two coats (excluding priming coat) on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint, brushing to give an even shade including of all dirt, dust and other foreign matter, sand papering and stopping.With enamel paint other white.( 1604602).
Painting one coat (excluding priming coat) on previously painted wood and wood based surface with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping.With enamel paint other than white. ( 1604102).
Demolition above G.L. up to floor two level including disposal of unserviceable materials with in 20 metres lead:-( 200502) Un-reinforced cement concrete up to 15 cm thickness.
Demolition below G.L. up to 1.50 metres depth and disposal of unserviceable materials with in 20 metres lead:-( 200102) Un-reinforced cement concrete up to 15 cm thickness.
Providing and fixing 10 mm anti skid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600x10 mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12 mm thick cement mortar 1:3(1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of yiles as required completed. (1368)
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement:3 sand) and jointed with cement slurry. ( 1323)
Dismantling wooden floors up to floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (joists to be measured and paid for separately).( 2023)
Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately).In 1st class Deodar wood 25 mm thick. (120410103)
Providing and fixing 12 mm thick 150 mm wide pelmet with 25 mm diameter wooden curtain rods and brackets including fixing 25x3 mm MS flat at 10 cm long and plugs etc. complete.( 1206403) 1st class Deodar wood.
Market rate item Providing & Fixing 8 mm thick PVC athistic venyl lining on walls plain or coloured ,Carbed or moasic /Metalled finish laid with approved adhesive on ceiling.
On Walls
Market Rate ItemProviding & fixing beading for 8mm thick PVC antistatic Vinyl lining on walls with screws complete.
Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted up to M-50 grade i/c border or curb block grey or coloured over sub – base of concrete with 25 mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately). 80mm thickness ( 137103)
Excavation in foundation, trenches etc. in earth work, lift up to 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in all kinds of soil. ( 070403 & 04)
Boulder filling dry hand packed tightly as in wire crates to be measured Paid for sepratelyin opron bunds. (113101)
Providing and laying cement concrete 1:3 : 6 (1 cement :3 sand : 6 graded stone aggregate 40 mm nominal size ) excluding cost of form work in Foundation and plinth:- ( 091201)
Providing and laying cement concrete 1:4 :8 (1 cement :4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in Foundation and plinth in breast and retaining walls ( 0914)
Providing and fixing poly carbonate sheetsi/c fitting, screws etc. complete. 1.50 mm thick. (Market Rate)
Providing and laying cement concrete 1:3 : 6 (1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in Foundation and plinth:- ( 092101)
Providing and laying cement concrete 1: 2: 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in Suspended floor, roofs, landing and shelves and their supports etc. ( 093103)
Providing Mild steel / tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level. Tor steel (094102)
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu – reinforced concrete & plain concrete work in:- flat surfaces such as soffits of suspended floor, roofs, landings and the like. (8050201) 080502) In vertical surfaces.
(080502) in vertical surfaces.
3 mm thick PVC rubber tiles flooring plain, coloured, morbed or mossic or mottled floor laid with approved adhesive on such fllor complete sub floor including damp proofing treatment to be measured separately for payment. ( 1352)
Providing and fixing to wall ceiling anf floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor.(3.2 (a) & (b) 15 mm nominal bore: 20 mm nominal bore .
20 mm nominal Bore.
Providing and fixing C.P. brass waste for wash basin or sink. 3.46 (i) 32 mm dia
Providing and fixing M.I. Union for wash basin or sink 3.47(i) 32 mm dia
Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass mounted on 6 mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washes. 3.52
Providing and fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screw.3.53 (ii) 600x20 mm
Providing and fixing Chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. 3.57
Providing and fixing :- 3.68C.P. brass bib tap 15 mmC.P. brass pillar tap 15 mmC.P. brass angle valve 15mm Item no. 3.70
Brass pillar Tapn 15 mm C.P.
Brass angle valve 15 mm item No.370
Providing and fixing P.V.C. connection with brass unions 300/450 mm length.3.94 (i) 15 mm nominal bore
Providing and fixing brass valve (horizontal plunger type).3.105 (b) 20 mm nominal bore.
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and out let connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level ;-3.114 1000 litres net capacity tank
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 3.116 (ii) 110 mm dia.
Providing and fixing PVC Collars ISI marked including fixing with approved adhesive etc. complete. 3.120. 110 mm dia
Providing and fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete. 3.121. 110 mm dia
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plug etc. complete. 3.125. 110 mm dia
Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings :- 3.39 550mmx400mm
Jai Singh
DEEPAK SHARMA
kashmir singh
Jagdish Singh
Gaurav Singh
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .