M P Grant

Name of Work :- Construction of Snanghat at Near Tirupati Balaji Temple Village:Ambla, Ta:Shihor, Dist:Bhavnagar

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 37.30 Cum 125.85

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 5.40 Cum 174.55

lead.(B) Dense or Hard soil

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4-

3 graded stone aggregates 20 mm nominal size) and curing complete Including cost of 5.70 Cum 4112.90

formwork and reinforcement for reinforced concrete work in (A) For PCC

Providing and laying Ordinary cement concrete work 1:1.5:3 (1- Cement : 1.5- Coarse

sand : 3- graded stone aggregates 20 mm nominal size) and curing complete Including

cost of formwork and reinforcement for reinforced concrete work in (A) footings

Brick work using common burnt clay building bricks having crushing strength not less

5 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 5.60 Cum 4279.97

sand) (B) Conventional

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) and finishing smooth with,curing

6 etc.complete including the cost of formwork but excluding the cost of reinforcement for 5.90 Cum 8035.64

R.C.C work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) for R.C.C lintel including finishing

smooth with,curing etc. complete including the cost of formwork but excluding the cost

of reinforcement.

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement : 1.5- Coarse sand :

3- graded stone aggregates 20 mm nominal size) for reinforced concrete Chhajjas not

exceeding 10cm. thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1- cement, 3 Fine sand) to give a smooth and even

surface centering and formwork and curing complete excluding cost of reinforcement.

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) and finishing smooth with,curing etc.

9 complete including the cost of formwork but excluding the cost of reinforcement for 2.80 Cum 11028.20

R.C.C work in (B) COLUMNS: (ii) Having cross-sectional area more than 0.08 Sq.M and

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

10 foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited 32.80 Cum 137.47

layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing strength not less

13 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 8.50 Cum 4568.40

sand) (B) Conventional For GF

Half brick masonry in common brunt clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos

of 6mm Mild steel round bars after every three course embedded in Cement Mortar in

foundation and plinth (B) Conventional

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

15 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 27.00 Sqm 1019.39

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying white glazed tiles 8mm thick in flooring treads of steps and

16 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 49.30 Sqm 889.23

finishing with flush pointing in white cement.

Providing fixing of Polished Marble Colour or Black frame for Doors & Windows,

17 Platform including necessary holdfasts, holes for fixtures and fastenings incl. all labour 7.10 Sqm 3205.69

& materials etc. comp

Name of Work :- Construction of Snanghat at Near Tirupati Balaji Temple Village:Ambla, Ta:Shihor, Dist:Bhavnagar

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture, M.S. frame shall be covered

with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side,

18 and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and 3.10 Sqm 1146.37

bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of

Engineer in charge, manufacture’s specification and drawing.

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) including scaffolding curing

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

20 half brick walls for interior plastering upto floor two level and finished even and 17.00 Sqm 200.08

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

21 to give an required shape even shade after thoroughly brushing the surface to remove 75.40 Sqm 122.13

all dirt, and remains of loose powdered materials.etc complete

Applying two coats of acrylic laphy (putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including thoroughly

22 brushing the surface free from mortar dropping and other foreign matter and sand 17.00 Sqm 40.59

papered smooth as per instruction of Engineer in charge & approved make.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.smooth.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

26 fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 6.00 Rmt 897.78

mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

28 jali of the following nominal diameter of self cleansing design with C.I scread down or 3.00 Each 600.23

hinged grating including the cost of cutting and making good the walls.

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace.

Providing,supplying, making,eracting and Fixing M.S.Steel Roof structure with M.S

trusses required pattern for Atalwadi etc as required using M.S. polished bars,

M.S.Flats ,M.S.angles, M.S. Channels and rectangular CRC pipes (Heavy) of required size

30 at required spacing for purlins,Hip and jack rafters,connecting plates,tees,eams 712.94 Kg 112.79

connected to commen rafters and the like as per design and hold fast with coach bolts

including cutting, hoisting, fixing in position with one coat of primer and two coats of

matt finished oil painting etc. complete.

Name of Work :- Construction of Snanghat at Near Tirupati Balaji Temple Village:Ambla, Ta:Shihor, Dist:Bhavnagar

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet including Roof Flashing.

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent (Should be written in figures and words) of the estimated rate

mentioned above. Amount of My\Our tender works put as under.

Estimate Amount Estimate Amount

Put to tender Rs___________ Put to tender Rs___________

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division

Shihor Bhavnagar