REPAIR TO RETAINING WALL AND FENCING AT TIRAH LINES IN MILITARY STATION DHARAMSHALA

Amount

Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Dismantling mild steel works in fencing posts and sturts complete all as specified and directed.

Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

Rendering cement plaster 20mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work, surface finished even and smooth without using extra cement, all as specified.

Hand packing (any thickness) of broken stone or boulders at back of walls over arches etc and raising (or lowering) to the required level complete all as specified and directed.

Plain cement concrete 1:3:6 ( nominal mix )type C-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed.

PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed.

Preparation of steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs (weighing 97 grams to 107 grams per Running Metre) at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), including taking out old barbed wire,all as specified. Note:- Weight of barbed wire per running metre shall be ascertained by BOO ordered by AGE(I) Dharamshala.

All as per srl item no 12 above but fixing only

All as per srl item no 12 above but Restraining, resecuring, including making good staples etc. , complete all as specified.

PVC 110mm dia pipe, pressure rating 4 kgf//sqcm (in short length) , fixed in retaining wall as weep hole complete all as specified & directed.

Walling of random rubble stone masonry, brought upto courses, well bonded, bedded and soilidly hearted built in CM 1:6, complete all as specified and directed.

All as per srl item no 16 above but except stone.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40 mm, complete all as specified & directed..

Raised pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar 1:3 complete all as specified.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments.

Ms Sunil Kumar

m/S Varun Gupta

M/S MADAN GOPAL and CO