NIT NO. 08, ITEM NO.06 (2023-24)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) ( DSR 2022 code 7.7.2 ) a) Upto 35 sq.mm ( DSR 2022 code 7.7.1 )

b) Above 35 sq.mm to upto 95 sq.mm ( DSR 2022 code 7.7.2 )

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1.KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm. ( DSR 2022 code 7.1.2) a) Upto 35 sq.mm ( DSR 2022 code 7.1.1 )

b) Above 35 sq.mm to upto 95 sq.mm ( DSR 2022 code 7.1.2 )

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ( DSR 2021 code 2.8.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR 2021 civil code 4.1.8 )

Supplying and laying of HDPE flexible PVC pipe complete with all accessories i/c jointing and making good the same etc as reqd. at site

Supply of XLPE insulated, PVC sheathed Al.conductor Armoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 3.5 x 70 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved.

Supply of XLPE insulated, PVC sheathed Al.conductor Armoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 4C x 16 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved.

Supplying and fixing of MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. A) 250 amp 35 KA TP MCCB

B) Supply of wall mounted cubical panel for the 250 amp MCCB 35 KA having of suitable size 1.5 x 1.5 feet with 16 swg M.S Sheet etc as reqd. at site

Supplying of wall mounted electrical feeder pillar of welded construction of size 3.5 feet x 3.5 feet fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and having 125 amp MCCB 35 KA with gland and termination with bakelite sheet - 1 nos and RYV indication light - 3 nos.

Removing of existing feeder pillar with cable and refixing the same after fixing of outsider feeder pillar for protection etc as reqd. at site

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required 4 x 16 sq. mm a) 4 x 16 sqmm ( DSR 2022 9.1.33 )

b) 3.5 x 70 sqmm ( DSR 2022 9.1.23 )

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. as required,

Providing and laying earth connection FRLSom earth electrode with 6 SWG dia G.I wire in 15 mm G.I Pipe FRLsom earth electrode including connection with G.I thimble excavation and refilling as reqd.

Supplying and fixing of 3 x 6 sq.mm copper conductor cable flexible cable i/c making connection etc as reqd. at site

Supplying and fixing of cable route marker for the laying of existing cable etc as reqd. at site

Testing and commission of complete work in the presence of Engineer-in-charge with full satisfaction.

EVERSHINE ENTERPRISES

P.K. Electricals