Electrical Work-CSPZ

Amount

LED, Panel & cable

122.2.39:S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

122.2.189:SITC of metal clad, powder coated, compartmentalized cubical panel board as per CPWD electrical specifications including insulated aluminum bus bars, supports, interconnection, erection of switch gears with depth 30 cm to 60 cm and making provisions for termination of incoming/ outgoing cables/ bus ducting and making foundation etc as required. (Suitable for 400 Amp TP & N)

122.1.31:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*35 sqmm

122.1.32:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*50 sqmm

122.1.24:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*240 sqmm

122.1.33:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*70 sqmm

122.2.121:S/I/T/C of MCCB Sheet Metal Enclosure, 4P, 100-125A

Rewiring

OD17291/2023-2024:19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD17293/2023-2024:1.27.4. Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. b) 6 Module (200mmX75mm)

OD17938/2023-2024:9.1.35 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade as required. 4x 35 sq. mm

OD17294/2023-2024:1.27.3. Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. (a) 3 Module (100mmX75mm)

OD17295/2023-2024:1.14.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

OD17296/2023-2024:2.10.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required a. Single pole

OD17381/2023-2024:1.27.6. Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. d) 12 Module (200mm X 150mm)

OD17961/2023-2024:7.7.2 Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required. above 35 sq mm and upto 95 sq. mm ( 25x3 MS flat clamp.)

OD17382/2023-2024:1.26. Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

OD17383/2023-2024:1.24.5. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. d) 6 pin 15/16 amp socket outlet

OD17384/2023-2024:1.24.3. Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. c) 15/16 amp switch

OD17385/2023-2024:1.3.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

OD17386/2023-2024:1.15.3 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group C

OD17387/2023-2024:1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

OD17473/2023-2024:2.3.2. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

OD17474/2023-2024:2.4.2. Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

OD17940/2023-2024:7.7.1 Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required. up to 35 sq. mm ( with 1 mm thick saddle)

OD17948/2023-2024:9.1.29 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade as required. 3 1/2 X 240 Sq. mm ( 62 mm)

OD17960/2023-2024:9.1.36 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade as required. 4X 50 Sq mm (35 mm)

OD17943/2023-2024:9.4.26 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing material for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cable of 1.1 KV grade as required. 3 1/2x 240 sq. mm

OD17946/2023-2024:2.2.13 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board with ISI marked HRC fuses including drills and holes in cubical panel making connection etc as required. 100 A, 30KA, FPMCCB

OD17945/2023-2024:2.2.16 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board with ISI marked HRC fuses including drills and holes in cubical panel making connection etc as required. 250 A, 36KA, FPMCCB

OD17944/2023-2024:2.2.18 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical, making connections etc as required. 400 amp, 50KA , FPMMCB

OD17942/2023-2024:2.2.14 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board with ISI marked HRC fuses including drills and holes in cubical panel making connection etc as required. 125 A, 36KA, FPMCCB

OD17681/2023-2024:2.4.3. Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

OD17687/2023-2024:1.14.5 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as reqd. 2 X 10 sq.mm + 1 X 6 sq.mm earth wire

OD17939/2023-2024:9.1.23. Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade as required. 3.5x70 sq mm(38 mm)

OD17941/2023-2024:7.7.4 Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required. above 185 sq mm and upto 400 sq. mm ( 40x3 MS flat clamp.)

DEV ENGINEERS

M/s Gyan Enterprises

M. CHHIBBA & CO.

AMIT ELEVATOR SERVICES

bharat electricals & electronics

Bidder Name

M/s Gyan Enterprises

DEV ENGINEERS

AMIT ELEVATOR SERVICES

M. CHHIBBA & CO.

M/S. A.K. Electricals

bharat electricals & electronics