Painting Part Area of Operational Boundary Wall and Terminal Building at Kadapa Airport

Amount

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

15 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing 25mm thick pre-cut Synthetic joint filler board of approved make conforming to IS:1838(part 3)-2011 at double column joints, complete as per particular specifications and directions of Engineer-in-charge.

Providing AAI LOGO and 'TRESSPASSING AND PHOTOGRAPHY PROHIBITED' at locations directed by Engineer in charge

NIRMAAN PROJECTS

SP ENTERPRISES

SRI MAHALAKSHMI ENTERPRISES

SUMAN FABRICATORS AND CONTRACTORS

BALVIR SINGH AND SONS

CIS GLOBAL INFRATECH PRIVATE LIMITED

D.SRINIVAS

teamwork contractors

Ruchira Associates

MANDAPATI UDAYA HARIKA