Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC VILL KASHNI NEAR AANCHAL DAIRY PO BIN PITHORAGARH UTTARAKHAND PIN 262508 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262508 | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹27.0 L+₹96,645 (3.71%)Rejected-Finance 161 MISSION INTER COLLEGE ROAD VILL PITHORAGARH DISTRICT PITHORAGARH STATE UTTARAKHAND PIN 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L2 | Rejected-Finance Being other than L1 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post - Bharkatiya Pithoragarh - 262520
ANNUAL REPAIR AND MAINT OF RESIDENTIAL AND NON RESIDENTIAL BLDGS (AR AND MO) INCL ELECTRIC INSTALLATION AT MIL STN DHARCHULA.
2023_MES_626973_1
8563/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
Dharchula
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹68,000
Yes
20 Feb 2024
6 Nov 2023
18 Dec 2023
6 Nov 2023
11 Dec 2023
22 Nov 2023
7 Nov 2023 - 14 Nov 2023
Amount
DESCRIPTION OF ITEMS
Taking down chowkhats or frame n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down Shutters of any description exc 1 sq. m but nexc 2 sqm each all as specified and directed.
M&L for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both side, face of door be lipping with 6 mm teak wood lipping, complete all as specified and as directed.
M&L for 35 mm thick glazed skelton shutters of 2nd class hard wood with or without sash bars edges of framing plain chamfered or rounded with cut and metered beads to secure glass of section as per ssr-I complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.
Supply & Fix Rolled mild steel framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces etc.,compelete drilled for fixing of steel sheeting or other covering . Doors etc. to be prepared for hanging or sliding with and incl. either hooks and hinges or steel hanging door fittings (exclsive of steel sheeting or other covering , running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.
S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S & F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S & F of 5.5 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed
S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.
S&F 200 mm aluminium anodised barrel tower bolts extruded section complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and of extruded sections or cast-aluminium alloy and fixed all as specified and directed.
S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M/L for Vitrified ceramic tiles 10 mm thick (Square/Rectangular), light shade, polished area of each tiles tile not exceeding 0.36 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor, finished the surface rough to receive tiles complete all as specified and as directed.
ditto as sl item No 19 above but for skirtings as including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles complete all as specified and as directed.
M&L for Joint free non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor, finished the surface rough to receive tiles complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to mat h the shade of the slab including rubbing polished complete all as specified and as directed.
M &L Glazed ceramic tiles colured in vertical surface 450X 300(7-8mm) thickset and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.complete all as specified and as directed.
Demolition of cement concrete in ground floor,paving nexc 15mm thick(below or above GL) complete all as specified and as directed.
M&L for 100 mm thick Plain Cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in sub base and paving complete all as specified and as directed.
M&L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate 75 mm thick as in plinth protection all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for 25 mm th PCC 1:2:4 type B1 (using 20 mm graded stone agg) as in base of tiles complete all as specified and as directed.
Providing cement concrete 75 mm thick type B-2 (1:2:4) using 40 mm graded agg as in floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.
M&L 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new surfaces, plastered wall surfaces and applying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed.
M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and as directed.
M &L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed.
M &L for preparation of (previously treated) surfaces of walls and applying one coat of oil emulsion distemper any tint of walls complete all as specified and directed.
M&L for one coat of synthetic enamel paint over to old wooden surface of any description exc 10 cm girth or width including prepration of wooden surfaces complete all as specified and as directed.
M&L for one coat of synthetic enamel paint to old steel surfaces of any description exc 10 cm girth or width including prepration old steel surfaces complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and as directed.
M/L for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.
Dismantling of wall and ceiling boards/AC sheets in any thickness & any position including cover fillets complete all as specified and as directed.
Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and as directed.
Dismantling of timber scantling under 40 Sqcm as in fillets, rails, posts, rafters, purlins, etc work complete all as specified and as directed.
M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.
M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed.
M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and as directed.
M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and as directed.
M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.
S&F 12m thick perforated tiles for insulation purpose 60x60cm in size ,fixed with staples or snap grid in ceiling complete all as specified and directed.
S&F anodised aluminium snap grid of size 606 x605mm frame work for false ceiling complete all as specified and directed.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall cladding complete all as specified and as directed.
S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as specified and as directed.
S&F 0.63 mm th galvanised plain mild steel sheeting in ridges,hips,valley,gutter fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc.
Demolition of brick work, stone/boulder masonary built in cement mortar complete all speecified and directed
M&L for precast cement concrete block masonary with P.C.C 1:3:6 mix type C-1 block exc 10cm in width and set in CM1:6 complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of of circulating pipes etc capacity of exc. 250 ltrs but n. exc 500 ltr incl embossing date of completion of cleaning by stencil with paint complete all as specified and directed.
ditto as sl item no 62 above but water tank of capacity exc 500 ltr but n. exc 1000 ltrs complete all as specified and as directed.
Taking up existing manhole covers and cleaning of soak well / septic tank of any size and any capacity, by dewatering and removing sludge in liquid mud state after emptying the sewage / waste water and removing the sludge to a distance exc. 250 m and n.exc. 500m and disposed off as directed by the Engineer-in-Charge , and placing the cover in position, complete all as specified and directed. Note :- Measurement shall be made for actual quantity of sludge removed from the tank in liquid mud state.
S&F in repairs vitrous china wash basin,white flat back size 550X400mm incl brackets, fixing in position complete all as specified and directed.
S&F in repairs vitrous china wash down water closet pan (padestal pattern) white colour (excluding cistern), complete all as specified and as directed.
S&F plastic water closet seat cover, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.
S&F PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets and PVC flush pipe 32 mm dia fixed in repairs complete all as specified and as directed.
S&F in repair 15 mm bore bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and Fix in repair 15 mm Basin Maxer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and as directed.
S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.
S&F in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repair 15 mm Stop valves/ angle valve , fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and as directed.
S&F in repair Aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flange complete all as specified and as directed.
M&L for round Grating 100mm dia with wash hole of PTMT complete all as specified and as directed.
S&F of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & railing 60 cm long complete all as specified and as directed.
M&L for 32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S & F 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and as directed.
S&F 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.
S/F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed
Supply and fix 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and as directed.
Supply and fix in repairs gun metal, globe or gate vlave 15mm dia bore with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.
E/M Items :
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets and light fittings etc and removing material to store for taking credit and making good disturbed surfaces of walls, floors complete all as specified and directed.
M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/surface PVC conduit of suitable size of size not less than 20mm, complete with all accessories / fitting and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for one light point/Fan point/bell point controlled by one way switch of 5/6 Amps.
~Ditto~ all as sl item No 89 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps complete all as specified and as directed.
~Ditto~ all as sl item No 89 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps complete all as specified and as directed.
M&L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/surface PVC conduit not less than 20mm dia, complete with all accessories /fitting and Ist class hard wood (shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly including making good disturbed surfaces complete all as specified and directed for 5 pin, 5/16 amps power socket complete all as specified.
S&F switch piano flush button single pole one way 5Amps complete all as specified and directed.
S&F switch piano flush button single pole one way 15Amps complete all as specified and directed.
S&F socket outlet 3 pin 5/6 Amps flush type complete all as specified and directed.
S&F socket outlet two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified and as directed.
S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.
S&F lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.
Supply & fix LED tube lights fittings 1x18 watt, 220 v, AC decorative box type with driver, holder , internally pre wired including LED tube light and connecting up to ceiling rose with three core flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED bulb 9 watts, 220 v, AC supply complete all as specified and directed.
S&F sheet metal enclosure for DB SPN 4 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified and directed.
S&F sheet metal enclosure for DB SPN 8 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified and directed.
S&F MCB SP 6 to 40 Amps, 240 volts 10KA complete all as specified and directed.
S&F MCB SPN 40 Amps, 240 volts 10KA complete all as specified and directed.
S&F 1100 volts grade heavy duty 10 sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed.
S&F 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 40mm dia, bracket clamps nut bolts and washers etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductore cable complete all as specified and directed.
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Taking down evacuated tube type solar water heater of capacity upto 250ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing u/s items i.e. heating element, thermostate, toughned glass tube, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts (heating element, thermostat, toughned glass tube, connection pipe with clamp) will be measured and paid separately under respective items as supply only as mentioned below.
Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Supply only thermostat for solar water heater complete all as specified and as directed.
Supply only evacuated solar tube made of toughned glass blue in colour as same as existing for evacuated tube type solar water heater complete all as specified and as directed.
Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified and directed.
Supply only GI/brass adjustable scew clamp as per sample complete all as specified and as directed.
Taking down carefully storage water heater of capacity 25/35/50 ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, rethreading of inlet/outlet pipe 15 mm dia, reassembling the same at existing /new location including necessary fasteners to ensure proper safety as reqd at site, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
Supply only thermostat fitting fitment varying capacity for 25/35/50ltrs capacity geysers complete all as specified and as directed.
Supply only PVC connection pipe nylon threaded 15mm size with brass nuts copping in both end of length 600mm for geysers complete all as specified and directed.
Supply only heating element of 1.5/2.0 KW for geyser (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.
Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, specified and directed.
Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified and directed.
Note : Tenderers may note that amount of credit Rs 60,698.50 will be deducted from the total amount arrived, at the time of Acceptance of contract.
SHAHJEE FRIDGE SERVICE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .