Upgradation of Fire Fighting system in factory at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Upgradation of Fire Fighting system in factory at HAL Korwa.

NIT No.- HAL/KWD/Civil/28 of 25-26/2 Date: 06.04.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

(a) ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

(b) EMD (As per NIT)

(c ) SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

(d) EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

i Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

ii Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

iii One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

(e ) BID CAPACITY

(f) LICENSE: License for execution of Electrical works and other specialized works from the concerned authorities / organizations/ bodies

(g) GST Registration certificate

(h) Documents to be submitted along with tender:-

i Constitution, legal status and Power of attorney in case of Pvt. Limited/ limited companies

ii Registration with HAL / other organization if any

iii Copy of PAN card issued by Income Tax Authority

iv Income Tax Returns for the last three years

v Annual turnover for the last five years

vi Plant & Machinery details for the work

vii Proposed Work completion schedule in the form of bar-chart

viii Work on hand [required for bid capacity also]

ix Bank Balance Statement for the last three months

x Overdraft facilities available with the agencies

xi Balance sheet for the last Five years

xii LETTER OF UNDERTAKING (as per the format enclosed at Annexure-I & J of Technical bid)

xiii Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of work : Upgradation of Fire Fighting system in factory at HAL Korwa.

NIT NO.- HAL/KWD/CIVIL/28 of 25-26/2

Note:- 1- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

2. Preamble to Schedule-A is enclosed in Technical Bid.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

Part-A Mechanical works

External/Internal Fire Fighting Hydrant System

1 Providing and fixing mild steel pipes conforming to IS:1239 (Heavy duty- C class) TATA, JINDAL or equivalent make including all fittings like anchor fasteners, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required, making good complete . Cost include Painting 2 coat of enamel paint with red oxide primer on pipe outer surface inclundg cost of all material labour T&P required for proper completion of work as per direction of Engineer in charge for proper completion of the work.

2 Providing and fixing mild steel pipes conforming to IS:1239 (Heavy duty- C class) TATA, JINDAL or equivalent providing laying, testing & commissioning of heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows,tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221,refilling the trench etc. of following sizes complete as required.

100 mm dia ( rate drive of 150 mm dia pipe for anticorrosive treatment per RMT sarface area ratei is Rs805, hence per SQm Rate is 1709.13 for 100 mm rate i.e Rs 1709.13x.314Sqm=536.62 perR/M + 3077.00) 60.00 RMT 3036.66 182199.60

80 mm dia( Rate drive from 150mm pipe ) 25.00 RMT 2272.50 56812.50

3 Providing, fixing, testing & commissioning of ISI marked S.S. metal single headed fire hydrant landing valve with flanged inlet, SS spindle controlled 63 mm dia female instantaneous outlet type. CI wheel, SS coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS:5290. (type A)of (NEWAGE/ SAFEGAURD/PADMINI) Including fixing with anchor fastner and flanged tapping complete as required. 52.00 No. 5573.11 289801.72

4 Providing, fixing testing and commissioning of Standard Stainless steel branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903) of (NEWAGE/ SAFEGAURD/PADMINI) all complete. 30.00 No. 2858.82 85764.60

5 Providing, fixing testing and commissioning of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type "A" of (NEWAGE/ SAFEGAURD/PADMINI) with Stainless steel male & female instantaneous type coupling (IS 903) bound and riveted to hose pipe with rivets and 1.5 mm GI wire. 65.00 No. 3921.85 254920.25

6 Providing, fixing testing and commissioning of standard fire hose cabinet (750 mm x 600 mm x 250 mm deep) for internal hydrants made of 18 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter of (NEWAGE/ SAFEGAURD/PADMINI) including necessary locking arrangement, stove enamelled Fire red finish with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe & nozzle spanner 20.00 No. 7200.00 144000.00

7 Providing, fixing, testing & commissioning of C.I Butterfly valve conforming to IS : 13095 with flanges fittings, nuts, bolts and washers of ZOLOTO/ KIRLOSKAR/LNT/ SANT) complete for following sizes :- [PN 16 rating (16 kg/cm2 pressure rating)].

Supply, Installation, Testing & Commissioning of OS&Y / Sluice Valve PN 16 complete with flanges, gasket, nut bolts.

8 Supply, installation, testing and commissioning of Manual Swing Type First aid Fire Hose Reel conforming to IS: 444 of (NEWAGE/ SAFEGAURD/PADMINI) complete with heavy duty reel, 19mm. dia.x30Mtr. long, 2-ply polyester yarn braided /rubber braided pressure hose with heavy duty nylon on/off jet/spray nozzle, 25mm. isolating valve and all other necessary fixing accessories 32.00 No. 4483.19 143462.08

9 Providing and fixing brass/bronze lever operated ball valves of full flow with stainless steel ball (AISI 304 and spindle AISI 401) of ZOLOTO/ KIRLOSKAR/LNT/ SANT) with settling and gland of superior quality and having minimum working pressure of 15 Kg/cm2.

10 Supply, installation, testing and commissioning of automatic air vents SS Body of size 25 mm of ZOLOTO/ KIRLOSKAR/LNT/ SANT) all complete. 8.00 No. 3000.00 24000.00

11 Supply, Installation, Testing & Commissioning of Pressure Gauge with gauge cock of H.Guru/WIKA/BAUMER) all complete. 18.00 No. 1252.94 22552.92

Pump House Equipment

12 (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 of (Make -Kirlosker/ Lubi/wilo) suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC suppl with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads.

13 (a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 of (Make -Kirlosker/ Lubi/wilo) suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump (b) Horizontal type,singlestage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. 193 DELHI SCHEDULE OF RATE (E&M) 2025 (c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

14 (a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 of (Make -Kirlosker/ Lubi/wilo) suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. 194 DELHI SCHEDULE OF RATE (E&M) 2025 (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

15 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser,drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 1.00 No. 16304.20 16304.20

16 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 3.00 No. 1403.36 4210.08

17 Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required. 5.00 No. 1252.94 6264.70

18 Providing and fixing mild steel pipes conforming to IS:1239 (Heavy duty- C class) of TATA, JINDAL or equivalent including all fittings like anchor fasteners, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required, making good complete . Cost include Painting 2 coat of enamel paint with red oxide primer on pipe outer surface inclundg cost of all material labour T&P required for proper completion of work as per direction of Engineer in charge for proper completion of the work.

19 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked of ZOLOTO/ KIRLOSKAR/LNT/ SANT) all complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

20 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange..(KARTAR/ZOLOTO or other ISI marked)

21 Supply, Installation, Testing & Commissioning of Non Return Valve PN 16 of ZOLOTO/ KIRLOSKAR/LNT/ SANT) complete with flanges, gasket and nut bolts. UL listed

22 Supply, Installation, Testing & Commissioning of Anti Vibration expansion bellow of Kanwal/easyflex/resistoflex) all complete with flanges, gasket and nut bolts.

23 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings of (NEWAGE/ SAFEGAURD/PADMINI) complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required:

Part-B- Civil Works

1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all complete as per drawing, specifications and direction of E.I.C. 550.00 Sqm 28.96 15928.00

2 Earthwork Excavation in foundation trenches, column footing drains, manholes, chambers or any description of similar types of excavation works in all soils except hard rock upto 1.50 mt. depth getting out, including dressing and levelling of trenches sides and also returning filling, dewatering if required etc., all complete as per drawing, specifications and direction of E.I.C. 42.00 Cum 220.77 9272.34

3 Dismantling of Brick Works of any description and in any position including stacking of serviceable material and disposal of unserviceable material of debris at directed place, including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 5.00 Cum 1747.36 8736.80

4 Dismantling of Cement concrete work of any description and in any position including removal of debris at directed place,including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 3.00 Cum 2064.61 6193.83

5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and below plinth level in: Cement mortar 1 :6 (1 cement : 6 coarse sand) all complete as per drawing, specifications and direction of E.I.C. 7.00 Cum 6049.23 42344.61

6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in above plinth in: Cement mortar 1 :6 (1 cement : 6 coarse sand) all complete as per drawing, specifications and direction of E.I.C. 14.00 Cum 7723.22 108125.08

7 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 156.00 Sqm 335.32 52309.92

8 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 20 mm cement plaster all complete as per drawing, specifications and direction of E.I.C. 145.00 Sqm 498.03 72214.35

9 Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8 graded stone ballast, 40 mm size, Shankergarh or other approved) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C 13.00 Cum 5777.61 75108.93

10 Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete foundation footings, base of coloum and raft beams, side and soffit of foundation if any plinth beam and similar work faces of wall retaining wall parapet, staircase railing, landing and similar work edges of cocnrete flats all type of RCC work or any description of works, in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456 -2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 299.00 Sqm 639.74 191282.26

11 Providing & laying RCC 1:1.5:3 ( 1cement, 1.5 coarse sand & 3 part, 20mm graded stone aggregate) below plinth level including cost of all labour, material, T&P, mechanical mixture, platform, placing of concrete in position at any floor without disturbing reinforcement required and preparation of cement concrete by mechanical mixing in the form of volumetic mixing, curing and proper compaction by mechanical vibrators as required and also as per drawing, specification and direction of EIC. 7.00 Cum 9204.94 64434.58

12 RCC 1 :1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) above plinth level all complete as per drawing, specifications and direction of E.I.C. 31.00 Cum 9758.40 302510.40

13 Providing & laying integral cement based water proofing treatment "Brick coba" including preparation of surface, cleaning of surface as required for treatment of roof, balconies, terraces, etc as per following specification with labour, material, T&P, lead & lifts etc all complete as per direction of EIC. 27.00 Sqm 1428.80 38577.60

(i)Applying and grouting a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with required water proofing liquid of approved make such as pidilite, Dr,fixit etc. or as approved by EIC confirming to IS 2645:1975 or relevant IS codes, Qty. as per manufacturer specification over the existing roof including cleaning the surface before treatment.

(ii)Laying cement concrete using broken brick/bricks bats 25mm to100mm size with 50% of c.m.1:5 (1 Cement, 5 Coarse Sand) admixed with required water proofing liquid of approved make such as pidilite, Dr .fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes, qty as per manufacturer specification over 20 mm thick layer of cement mortar of mix 1:5 (1cement, 5coarse sand) and mixed with required water proofing liquid of approved make such as pidilite, Dr,fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes as per manufacturer specification to required slope and treating similarly the adjoining wall up to 300 mm height including rounding of junction of wall & slab.

(iii)After two days of proper curing applying a second coat of cement slurry @ 2.75 kg/sqm of cement admixed with required water proofing liquid of approved make such as pidilite, Dr,fixit etc. or as approved by EIC conforming to IS 2645:1975 or relevant IS codes as per manufacturer specification.

(iv)Finishing the surface with 20mm thick joint less plaster with cement mortar of mix 1:4 (1 Cement, 4 Coarse Sand) admixed with required water proofing liquid of approved make such as pidilite, Dr,fixit etc. or as approved by EIC confirming to IS 2645:1975 or relevant IS codes, Qty as per manufacturer specification and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square.

(v)The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and final test of all operation to be done in order as directed.

(vi)The thickness of treatment shall be 125 mm maximum & minimum thickness at khurras 65 mm (All above will be treated as single item including labour, material, T&P etc all complete as per direction of EIC. Note: Qty. of liquid water proof compound shall be mixed per bag of cement as per manufacture specification.

14 Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallant/ Kamdhenu or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 5320.00 Kg 91.47 486620.40

15 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer. 140.00 Kg 4922.97 689215.80

16 Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per direction of EIC. 3.00 Sqm 2686.90 8060.70

17 Providing & fixing 4 mm thick plain glass panes with putty and glazing clips of approved make such as saintgobian, TATA. triveni or as approved by EIC, all complete in all respects including all material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 2.00 Sqm 902.98 1805.96

18 Providing and applying two coats of acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 81.00 Sqm 53.18 4307.58

19 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 20.00 Sqm 87.19 1743.80

20 Providing and laying 40 mm thick, cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size of Bharatcoop/Dala/Jhansi) laid in panels, finished with a floating coat of neat cement slurry including rounding of edges, making /finishing surface even and smooth with using extra cement , in required shape , size & gradients etc including all labour, material, T&P, side shuttering, curing etc all complete as per specification and direction of EIC. 19.00 Sqm 520.93 9897.67

21 Providing and fixing glass strips in joints of terrazo/ cement concrete floors as approved by EIC, all complete in all respects including all material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 47.00 RM 77.82 3657.54

22 Providing & applying two coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 68.00 Sqm 102.41 6963.88

23 Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1075.00 Kg 113.40 121905.00

Part-C Electrical works

A) Internal Electrification

1 Supply & making point wiring with FRLS PVC insulated multistrand copper wire of size 2X1.5 sq mm for light & fan light point with 1X1.5 sqmm. earth wire((for fan points only)) (ISI mark), grade 1100V make-Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/Cap cab in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering, matching painting/on metal/on wall surface with accessories such as bends, junction boxes, inspection boxes, sheet cover, socket, lock nut, brass bush,saddle, screw-gullies etc.(as required) with s&f of modular metal box concealed in wall/on wall surface with modular frame, plate for fixing of switch, socket , fan regulator etc., internal connection, testing complete in all respect as per EIC.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green)

1(a) Light point wiring as per item above by providing & fixing 5/6Amp modular switch Anchor/ Havells /L&T/ Legrand/ GM/ABB make, making connection & testing complete in all respect. 12.00 Nos. 1154.24 13850.85

1(b) Supply & fixing of 5/6 Amp modular multi socket(5pin)- 01 No. & 5/6 Amp modular switch - 01 No., Anchor/Havells/L&T/Legrand/GM/ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 4.00 Nos. 461.86 1847.46

2 Supply and fixing of modular mini telephone jack make Anchor/ Havells/ L&T/ Legrand/ GM/ABB for Telephone by providing & concealed in wall/on wall/metal surface modular metal box with modular plate, frame, screw etc., connection & testing, complete in all respect. 1.00 Nos. 467.80 467.80

3 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, Anchor/Havells/L&T/Legrand/GM/ABB make, connections etc. as required, making connection & testing complete in all respect as per direction of EIC. 6.00 Nos. 558.47 3350.85

4 Supplying and fixing suitable size GI box with modular plate and cover in front by concealed in wall/on wall/metal surface, including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6 A modular switch-2each Anchor/Havells/L&T/Legrand/GM/ABB make, connections etc. as required, complete in all respect as per direction of EIC. 2.00 Nos. 923.73 1847.46

5 Supply, Laying & testing of circuits/sub mains wiring with 2 X 2.5 sq.mm.(for phase and neutral) + 1X2.5 sqmm. (for earth wire) FRLS PVC insulated multistrand copper wire make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ HPL/RR Kabel/ Cap cab/Seiko in appropriate size of PVC conduit (ISI marked), medium class, concealed in wall by cutting, plastering, matching painting in wall/on wall/metal surface(as required) with all accessories such as bends, junction boxes with cover, inspection boxes, lock nut, MS saddle, gullies, screws etc. at main DB/Sub DB/Switch boards etc. as per direction of EIC.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 60.00 Meter 226.27 13576.27

6 Supplying & fixing suitable size GI box wih modular plate and cover by concealed in wall/on wall/metal surface including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve Anchor/Havells/L&T/Legrand/GM/ABB make including connections, painting etc. as required. 2.00 Nos. 683.90 1367.80

7 Supply and laying sub main wiring with FRLS PVC insulated multistrand copper wire of size of 2X4 sqmm.+ 1X4 sqmm. earth wire (ISI marked) make Havells/Anchor/National/Polycab/Gloster/Finolex/Kei/RR Kabel/Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering, matching painting/in wall/on wall/metal surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. from SPN/TPN DB to AC point and making connection, testing as per direction of EIC.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 50.00 Meter 316.10 15805.08

8 Supply, fixing, testing of sub main wiring with 1 X 1.5 sq.mm. FR PVC insulated multistrand copper wire(prefferably white color) make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/HPL/ RR Kabel/Cap cab/Seiko in existing PVC conduit (item no. 1) from UPS DB to rooms as per direction of EIC 50.00 Meter 43.22 2161.02

9 Supply, Laying & testing of 4 Pair 0.5mm dia FRLS PVC unarmoured telephone cable for telephone connection make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ HPL/RR Kabel/ Cap cab/Seiko in appropriate size medium class, PVC conduit (ISI marked), concealed in wall by cutting, plastering, matching painting with all accessories such as bends junction boxes, junction box cover (laminated sheet), inspection boxes, socket, lock nut etc from Telephone D.B. to telephone point and making connection etc. 25.00 Meter 172.88 4322.03

10 Supply & Fixing of 30 Pair plastic Telephone Distribution Junction Box with connector etc.,complete in all respect as per direction of EIC. 1.00 No. 834.75 834.75

11 Supplying, installation, Testing & Commissioning of 36W LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 4.00 Nos. 691.53 2766.10

12 Supplying, Installation, Testing & Commissioning of 90W Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) including s&f of required size of GI pipe, clamp, fastner/nut-bolt-washer etc. for fixing of street light on wall/metal surface (as required) complete in all respect. 1.00 Nos. 2389.83 2389.83

13 Supply, Installation, Testing and Commissioning of Propeller Type AC Ventilating Fans - Exhaust Fans as per IS 2312, ISI marked product, Rated Voltage : 230 V, 50 HZ, AC, Single Phase, Number of blades : 4, Number of pole (in nos.) : 4, Type of fan : Capacitor Type, Size of fan (in mm) : 450, Speed regulator : No, Class of insulation : Class E, Provision of guards for : Without Guard make Crompton/Surya/Havells/Philips/C&S/Bajaj/Usha/Orient on wall surface with fastners, nut-bolt etc., completed in all respect 2.00 Nos. 6144.92 12289.83

14 Supply, Installation, Testing and Commissioning of Air Circulator Type Electric Fan As Per IS 2997, Fan Size(sweep size)(mm):450, Type of circulator fan: Wall mounting Type, Type of enclosure of motor and regulator: Totally enclosed, Type of Insulation: Double , Length of cord with suitable plug top(inclusive in the scope of supply)(mm):150.0 make Crompton/ Surya/ Havells/ Philips/ C&S/ Bajaj/ Usha/ Orient on wall surface with fastners, nut-bolt etc., completed in all respect 4.00 Nos. 4038.14 16152.54

15 Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCCB and MCBs (Make: Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/Anchor/Indoasian/Eaton) as given below: a) MCCB TP 125Amp, 16KA - 1No. b) MCB 'C' Curve TP 16Amp - 1Nos. c) MCB 'C' Curve SP 32Amp - 2Nos d) MCB 'C' Curve SP 20Amp - 4Nos e) MCB 'C' Curve SP 10Amp - 3Nos 1.00 No 14143.22 14143.22

16 Supplying and fixing of 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required with following lsolator/ MCBs)(Make: Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/Anchor/Indoasian/Eaton): a) Isolator DP 63Amp - 1 No. b) MCB 'C' Curve SP 32Amp - 2 Nos. c) MCB 'C' Curve SP 25Amp - 2 Nos. d) MCB 'C' Curve SP 10Amp - 2 Nos 1.00 No 3928.81 3928.81

B) External electrification

1 Supply, laying and testing of size 2CX2.5 sqmm. copper conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, make Gloster/Havells/National cables/Polycab/TESCAB/KEI on cable tray as required(clamped with 1mm thick saddle) as per direction of EIC. 75.00 Meter 216.10 16207.63

2 Supply, laying and testing of size 4CX16 sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, make Gloster/Havells/National cables/Polycab/TESCAB/KEI on cable tray as required(clamped with 1mm thick saddle) as per direction of EIC. 50.00 Meter 306.78 15338.98

3 Supply, laying and testing of size 3.5CX95 sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, make Gloster/Havells/National cables/Polycab/TESCAB/KEI Direct on cable tray as required(clamped with 25x3mm MS flat clamp) as per direction of EIC. 150.00 Meter 981.36 147203.39

4 Supply, laying and testing of size 3.5CX240 sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, make Gloster/Havells/National cables/Polycab/TESCAB/KEI Direct on cable tray as required(clamped with 1mm thick saddle) as per direction of EIC. 285.00 Meter 2290.68 652843.22

5 End Termination of 4CX16 sqmm.size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 4.00 Nos. 310.17 1240.68

6 End Termination of 3.5CX95sqmm.size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 4.00 Nos. 579.66 2318.64

7 End Termination of 3.5CX 240 sqmm size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc as per direction of EIC. 2.00 Nos. 983.05 1966.10

8 Supply, making & testing of earth pit for earthing as per IS standard the job involves digging of pit up to 4.5 meter deep, supply & fixing of GI pipe 40mm dia (Internal) 4.5mtrs long, class B, make Jindal/TATA/Oswal, wooden charcoal/coke & salt (as required) suitable GI reducer, GI nipple, CI funnel for watering, CI hinged Chamber cover with frame size 12" X 12" etc and perforation from bottom, making of Earth Chamber and S&F of earth resistance identification marker with MS angular channel of thickness 5 mm of size 40 mmx40mm of length 450mm. the channel shall be grouted approximately in 300 mm x 300mm x300mm depth of which 150 mm will be below the ground cement concrete pedestal work with 350 mm channel above the ground length just next to earthing pit as per direction of EIC. 2.00 Nos. 6489.83 12979.66

9 Supply, laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode including connection/terminating with GI nut-bolt-spring washers etc.complete as required(jointing shall be done by overlapping and with 2sets of GI nut bolt & spring washer spaced at 50mm) as per instructions of engineer in charge. 15.00 Meter 135.59 2033.90

10 Supplying and laying of 6 SWG G.I. wire on cable tray surface or in recess for body earthing of motors, including connection/ termination with GI thimble etc.as required. 22.00 Meter 52.54 1155.93

11 Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A Outgoings (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control Control for diesel engine comprising - 1.00 Set 254917.80 254917.80

Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.

12 Supplying and installaton of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. 25.00 RMT 527.97 13199.15

13 Supplying and installaton of 200 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. 25.00 RMT 656.78 16419.49

14 Supplying and installation of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastner etc as required. 10.00 Nos. 803.39 8033.90

15 Supplying and installation of 200 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastner etc as required. 10.00 Nos. 1121.19 11211.86

Total (A+B+C) 13617967.40

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 13617967.40

Add GST @18% on sub total 2451234.13

Total Quoted value including GST @18% 16069202.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya