NAGAR PALIKA PARISHAD DOIWALA KE WARD NO 2 ARYA NAGAR ME SHAHEED DURGAMALLA P.G COLLEGE DOIWALA KE SAMIP PALIKA KI CAFATERIA KI CHAT PAR LIBRARY KA NIRMAN KARYA.

Amount

1-CIVIL WORK

Providing and laying autoclaved aerated concrete (ACC) blocks masonry with 150 mm to 300 mm thick with grade-1 ACC blocks of density 551 to 650 kg/cum conforming to IS:2185(part 3) in super structure above plinth level upt o to floor V level with RCC band at sill level and lintel level eith approved block laying polymer modified adhesive mortal all complete as per direction of engineer in charge,(the payment of rcc band and reinforcement shall be made for seperately).

Providing and laying autoclaved aerated concrete (ACC) blocks masonry with 100 /150 mm thick with grade-1 ACC blocks of density 551 to 650 kg/cum conforming to IS:2185(part 3) in super structure above plinth level upt o to floor V level in cement mortar 1:4. the rate includes providing and placing in position 2 nos 6mm dia M.S. bars at every third course of masonry work.

Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade 1, Type II, IS:12823 marked

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work above plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm n

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Providing and applying cement based putty of 2 mm thickn plastered surface to prepare the surface even and smooth complet

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Wall)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement : 4 course sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with with cement and matching pigments etc. complete size of tile 600x600 mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer

Providing & fixing glass panels with putty and glazing clips in steel doors, windows, clerestory windows alll complete. With 5.5 mm thick glass panes.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section , power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sqm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type, core of block board construction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces o

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing the jointswith white cement and matching pigments etc., complete. (Floor )

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300 x 16mm

Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre- treatment of the surface.Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B

Steel work welded in built up section/framed work including cutting in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing stainless stell ( Grade 304 ) railing made hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( whenever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required sie, on the top of floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for patmen purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc,).

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :1.60 mm thick with zinc coating not less than 350 gm/m²

2-SANITARY WORK

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain water pipes embedded in and including cement concrete blocks 10x10x 10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.100 mm diameter.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C. automatic flushing

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work - Exposed on wall 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bor

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser approved quality conforming to IS:8931.15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls

Providing and placing on terrace (at all floor levels) polyethylene water tank ISI : 12701 marked with cover and suitable locking arrangement in tank. and necessary holes for inlet, outlet and overflow pipes but without fitting base support for tank.

Providing and fixing PTMT soap Dish Holder having length of 138m 102mm, height of 75mm with concealed fitting arrangements weig than 106 gms.

Providing and fixing 600x450 mm bevelled edge mirror of superior quality) complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia.

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse Inside size 60x45x50 cm. inside including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75

3-ELECTRIC WORK

WGPVCPT Point wiring in PVC conduit, with piano type switch: wiring for light point / fan point /Ex Fan Point/Call Bell Point recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. Group C

LPACCPT S / F light plug point piano type accessories: Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 anos socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.( For light plugs to be used in non residential buildings).

WGSTLPTTC Twin control Point wiring in PVC conduit, with piano type switch: wiring for twin control light point recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required.

PPACCPT S/F power plug point piano type accessories: Supplying and fixing matel box of 180 mm x 100 mm x 60 mm deep on surface or in recess with 15 Amp piano type switch and socket. Complete with all work

MCBDPSOC20 S/F 20A SPN MCB industrial socket outlet: Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 2.5 sq. mm + 2 x 2.5 sq mm earth wire.

CREB S / F Ceiling rose : Supplying and fixing 3 pin 5amp ceiling rose including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

TPMCBDB S/F TP MCB DB:4 way (4 +12), Double door, hotizontal type

MCBC S/F C series SP MCB S/F 5 amo 32 amp rating,240V C series MCB on existing DB complete with connections.

MCBTPIS S/F TP MCB isolator : S/F 100 amp rating ,415V isolator on existing DB complete with connections.

M/S aditya kothiyal

M/S CHANDI PRASAD THAPLIYAL