Special repair to roof sheet and ceiling of building No. P-31-8(GE Office) and certain MW and RW at Mil station Pithoragarh under GE (MES) Pithoragarh

Amount

DESCRIPTION OF ITEMS

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft/disintegrated rock complete all as specified and directed.

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / loose soil complete all as specified and directed.

Surface Excavation n.exc 30cm deep and averaging 15 cm deep & getting out in soft/disintegrated rock complete all as specified and directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing excavated material (Soil) , n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

M&L for PCC 1:4:8 type -D2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls ,beams and columns etc complete all as specified and as directed .

M & L for RCC type B1, 1:2:4 (20mm graded aggregate) in beams cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping) for rough finish surface complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.for rough finished surfaces of concrete complete all as specified and directed.

Use and waste for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete lilings, openings in concretewalls, floor and roofs exc 5 but not exc 10 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similarwork exc 5 but n. exc 10cm wide for rough finished surfaces complete all as specified and as directed.

M&L for TMT bars, 10 mm dia and above , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and directed

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges, fixed with self tapping screws as specified

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm with or girth and applying a coat of synthetic enamel paint all as specified and directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Hacking out old broken glass (any thickness), size quality or description from wooden frames/ steel window complete all as specified & directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets.

S & F GI powder coated snap grid frame work for false ceiling comprising of the following section for making partitions of 600 x 600 mm size fixd to walls with rawl plug & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and directed :- (i) Main tee of size - 38mmx24mmx0.3mm (ii) Cross tee of size - 28mm x 24mm x 0.3mm (iii) Wall angle - 24mm x 24mm x 0.3mm

S & F 4mm thick prepainted self designer E - board ceiling of size 595x595 mm size fixed on snap grid as in ceiling complete all as specified and directed

S & F Rolled sections, Fe-290 (Gde E165) as in main and cross beam, hip and jack rafter, purlins whee connected to common raftr and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates

Dismantling carefully wrought iron or mild steel work of any description not otherwise provided for and refixing of same at location as directed complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over a coat of primer complete all as specified

Dismantlinng of boarding any desciption fixed in any postion fixed with screws complete all as specified and directed

S & F 20mm thick clean sawn 2nd class hardwood boarding with nails in any situation with butt joints including preparation of surface and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 2 mm) complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of old or previously untreated steel surface etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old plastered surface of walls and applying one coat of exterior emulsion paint 1st quality (Apex ultima of Asian Paint/ Berger/Shalimar) paint complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (using 20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

Taking down cement or cement plaster, any description on bricks or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15 mm thick rendering on brick or concrete surfaces of wall in CM 1:6 including finishing the surface even and smooth without using extra cement all as specified and directed

M&L for 10 mm thick rendering on brick or concrete surfaces of wall in CM 1:6 including finishing the surface even and smooth without using extra cement all as specified and directed

M&L for 05 mm thick rendering on brick or concrete surfaces as on ceiling in CM 1:4 including finishing the surface even and smooth without using extra cement all as specified and directed

M & L for preparation of plastered surfaces (previously untreated) of walls and applying two coat of cement base paint on walls complete all as specified and directed.

M&L for applying two coats of oil bound distemper on new plastered surfaces of wall incl preparation of new surface.by applying a thin layer of Birla care putty to get smooth surface complete all as specified and directed

M & L for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint 1st quality (Apex ultima of Asian Paint/Berger/Shalimar) paint complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified & directed.

Taking down shutters of any description not exc. 1.00 Sqm each complete all as specified & directed.

S & F of second class hard wood (Sal) as in plain, solid , straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified & directed.

M & L for second class hard as wood in scantlings, clean sawn (SAL) fixed in any position complete all as specified & directed.

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position and in any situation. (unfrarmed work) complete all as specified & directed.

S & F 30mm thick second class hard wood glazed and skeleton shutters for window/ventilator with sash bars & size of members of shutters as per clause No 8.20 (b) of SSR Part-I (2009).

S & F aluminium anodized barrel tower bolts 150mm long, of extruded section complete all as specified & directed.

S & F aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.

S & F aluminium handles 125 mm long, cast type, anodized complete all as specified & directed.

S & F aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

S & F Butt hinges 75 mm long, medium weight, cold rolled mild steel complete all as specified & directed.

S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/height complete all as specified & directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S & F MS framed work such as grills, grating etc with ends of bars shouldered and/ or riveted, forged into spikes, framed guard bars, railings and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

M&L for rubber moulded chequered cement concrete coloured tiles 25 cm x 25 cm x 20 mm thick , with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over 15 mm thick screed bed in cement mortar 1:6 , complete all as specified and as directed.

M & L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone aggregates ,all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base under floor and finishing the surface of concrete even and rough complete as specified and directed.

M & L for preparation of new steel surface etc of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed complete to walls and ceiling or laid in floor 15mm dia complete all as specified.

S&F GI tubing medium grade with all fitting and fixed complete to walls and ceiling or laid in floor 20mm dia complete all as specified.

S&F 15 mm bore dia gate valves with iron wheel head screwed both end for iron pipe & fixed complete all as specified and directed.

S&F 20 mm bore dia gate valves with iron wheel head screwed both end for iron pipe & fixed complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socket in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F PVC (SWR) bends 110mm bore dia complete all as specified and directed

S&F PVC (SWR) pipes 75mm dia single socket in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC(SWR) bends 75mm bore dia complete as specified and directed.

S & F PVC (SWR) junction single,(Single T) equal or unequal 75 mm dia complete all as specified and directed.

S&F Rotational moulded polythlene water storage tanks 500 Ltr capicity three layered in white colour (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR.

S & F in repair PTMT float valve 20mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferule fixed complete all as specified.

S & F 450 mm long PVC connection, 15 mm bore complete all as specified & directed.

S&F vitreous china wash basin white flat back, size 550 x 400 mm including PVC waste pipe and waste coupling fixed with iron angle bracket complete all as specified and directed.

S&F fancy type pillar taps 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F 15 mm bore bib taps brass chromium plated screwed down, screwed, capastan head for iron pipe or for brass ferrule including flench in repair complete all as specified & directed.

S&F 15 mm bore dia fancy type, chromium plated stop /angle cock cast copper alloy screwed down high pressure, with crutch or capastan head screwed both end for iron pipe & fixed complete all as specified and directed.

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified & directed.

S & F PVC low level flushing cistern complete with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia of capacity 10ltrs complete all as specified and directed.

S & F Vitreous China bowl Urinal flat back , size of 465x355x265 mm white (minimum) with grating union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1 : 2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for dischare pipe including PVC connection complete all as specified and directed.

S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1 : 2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for dischare pipe including urinal spreader complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia, 60 cm , D type long between flanges complete all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified and directed.

S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 350x250/ 450x350/ 300x450x6 to 7mm thick on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifica-tion & drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

S&F 600x450 mm bevelled edge of slected quality mirror mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Soap dish cromium plated, fixed to plugs with chromium plated brass screws / plastic cleats complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR part I, section 8 clause 8.24(a) fitted to chowkats complete all as specified and as directed.

Dismantling of existing ceiling care fully of any kind and refixing at same or different location, with required all fitting and fixtures for fixing of ceiling alongwith cover fillets complete all as specified and directed.

M & L for aluminium sliding window three track with glazed and stainless steel wire cloth gazed shutter with bombay sliding section of size 20x39mm of minimum thickness 2.00mm including 5.5 thick glass, stainless steel wire colth of 0.56mm nominal dia and average width of aperture 1.18mm, including locking arregemnet as required in three track window system complete all as specified and directed.

E/M Works Taking down carefully Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully by disconnecting electrical connection, main switches / distribution board / AC Box/MCB DB with MCBs of any rating, removing dismantled material from site and making good disturbed surface of walls to match with existing all as directed.

Taking down Sub main or service wire including with GI wire earth wire of any size, fixed in any position, complete all as specified and directed.

M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, heavy grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/ fan/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps.

(b)one socket outlet three pin 5 amps control by one switch on the same board

(c)one socket outlet three pin 5 amps control by one switch on independent board

(d) One light point controlled by two, two way switch of 5/6 amps

All as per Item No 98 above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S&F Switch piano, flush type, white finish, 5/6 amps, single pole, one way complete all as specified and directed.

S&F Socket outlet 5 pin, 5/6 amps and 2 pin 5/6 amps flush type, non shutters, non inter locking type, complete all as specified and directed.

S&F Switch piano, flush type, white finish, 5/6 amps, single pole, two way complete all as specified and directed.

S&F outlet 2 in 1, 5/6 pin, 5 and 15 amp flush type, complete all as specified and directed.

S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F in repair of bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed. complete all as specified and directed. complete all as specified and directed.

S&F in repair of bell electric multi music type, AC, SP 240 volts, sound as approved, complete as all specified and directed.

S&F in repair Modular switch piano flush type single pole one way 6 amp, 230 volts ISI marked. Make: Roma/Anchor/Havells/crompton (Note-The quoted rate shall deemed to include for moduler cover plate with frame of any colour and metal flush boxes of any type and size)

S&F in repair Modular switch piano flush type single pole one way 15 amp, 230 volts ISI marked. Make: Roma /Anchor /Havells /crompton (Note-The quoted rate shall deemed to include for moduler cover plate with frame of any colour and metal flush boxes of any type and size)

S&F in repair Modular type Socket outlet 3 pin 5 amp, flush type, 230 volts ISI marked. Make: Roma/Anchor/Havells/crompton (Note-The quoted rate shall deemed to include for moduler cover plate with frame of any colour and metal flush boxes of any type and size)

S&F in repair Electronic fan regulator moduler type, 300 W Step type, 230 volts ISI marked. Make: Anchor/Havells/crompton (Note-The quoted rate shall deemed to include for moduler cover plate with frame of any colour and metal flush boxes of any type and size)

S&F in repair Modular type Socket outlet 3 pin 15 amp, flush type, 230 volts ISI marked. Make: Roma /Anchor/Havells /crompton (Note-The quoted rate shall deemed to include for moduler cover plate with frame of any colour and metal flush boxes of any type and size)

S&F for in replacement of 1x20 watt LED security light fitting , pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with two core copper flexible wire of 0.50 Sqmm complete all as specified and directed.Make : C&S /Bajaj/Philips/wipro/Havells

Supply and Fix in repair ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&Fceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

Supply and Fix in repair lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified and directed.

Supply and fix in replacement of LED Integrated Batten T5 box type surface mouted, (1x18 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed. Make :-Havells /Philips/wipro/Crompton

S&F in replacement recess mounting LED 2x2 luminaire 34W, slim ceiling light with extruded aluminium housing and milky diffuser complete and including taking down old fitting all as specified and directed. Make-Havells /Philips, BAJAJ,C.G

S&F B121integral EDGEPRO ROUND of slim fit low profile downlights are engineered to to diliver superior light output and uniformity utillsing the latest edge-litLED tecnologe. An ideal solution where ceilling voids are limited but high lumine required complete and including taking down old fitting all as specified and directed. Make-Havells /Philips, BAJAJ

S&F EDGEPRO NEO DL SURFACEmounted down light 20 watt with white powder coatedaluminium housingwith integrated electronic driver. Make-Havells /equivalent in Philips, BAJAJ.

M & L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 5 of MES schedule 1991 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 dully reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&F in repair of AC box with MCB 20 amp SPN and Connected Plug of suitable size ,220Volts all as specified and directed by E-in C Make:- IndoAsian/Crompton/Havells/standard

S&F in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed. Make-Legrand /L&T/ABB/Havells

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, complete all as specified and directed. Make-Legrand /L&T/ABB/Havells

S&F in repair MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed. Make : Legrand /ABB/Havells /L&T

S&F in repair MCB single pole & Neutral 240 volts, 6-32 amps, of 10 KA complete all as specified and directed. Make : Legrand /ABB/Havells /L&T

S&F in repair MCB Triple pole & Neutral 240 volts, 100 amps, of 20 KA Make : Legrand/ABB/Havells /L&T

Taking down & refixing the any type any wattage of light fitting /fancy light fitting and connect to existing connection complete all as specified and directed.

M&L for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x4 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including PVC conduit along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

S&F B130 PVC exhust fan(copper wounded) AC single phase 230/240V of size 300 mm sweep with louvrs with and including required flexible cord and connect to ceiling roe complete all as specified and directed. MAKE-Bajaj/C.G/Havells

S&F 4 Watt decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, complete all as specified and directed. Make - Bajaj/ Surya/ Havells

M/s J P Traders