REPAIR MAINT OF STREET LIGHTS HIGH MAST MID MAST LIGHTS PERIPHERY AND GATE LIGHTS AT INS CIRCARS INCS COMPLEX INS SATAVAHANA COMMAND STADIUM DOLPHIN FLEET GROUND INS VIRBAHU AND CERTAIN POCKETS OF NAVAL DOCKYARD AREA UNDER AGE EM NO I OF GE

Amount

M&L for preparation of old painted surface, cleaninig of oils, lubricants, grease etc complete of any type of 11.0 mtr long MS poles as per IS above PCC coping by applying one coat of aluminium paint including brackets, clamps including writing pole Nos as before all as directed.

M&L for preparation of old painted surface, cleaning of oils, lubricants, grease etc complete of any type of 9.0 mtr long poles as per IS above PCC coping with applying one coats of aluminium paint including brackets, clamps including writing pole Nos as before all as directed.

M & L for erection of vertically position steel tubular swaged poles complete with cast iron base plate,final taper plug,bolts,nuts & screws as specified type 410 SP-31 (9.0 meters long) and applying three coats of black bituminous paint throughout internally and two coats externally on the pole embedded in concrete and applying two coat of zinc chrome primer to the exposed surface including taking down existing old pole and all as directed.

Supply and fix hot press moulded junction boxes with hinged door, 4 P, 50 Amps rated connector and and neutral link mounted in the box,including necessary fixing arangement to the steel tubular pole/over walls including taking out old one complete all as specified and as directed. Make: Sintex /Hansel or equilvalent.

Supply and replacement of multi core PVC insulated stranded copper conductor of size 1.5 sqmm 3 core cable to be connected with street light fittings to loop-in and out boxes with its end point terminal connection complete all as specified and as directed. Make : Havells / Polycab / Finolex or equilvalent.

Supply and replacement of multi core PVC insulated stranded copper conductor of size 16 sqmm 4 core cable to be connected with street light fittings to high mast light panel and out boxes with its end point terminal connection complete all as specified and as directed. Make : Havells / Polycab / Finolex or equilvalent.

M&L for bracket for street light fitting made out of 50 mm bore pipe medium grade GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking out old one. Make: Tata /Jindal or equilvalent.

Supplying, fixing and testing of Street lights LED type 90W pressure die cast aluminium housing high pwer LED as ligghing source and lens embedded PC cover having TOP openng separate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built in Surge Protection device. on 09 mtr poles Model no ENDURA PEARL PLUSSL90WLEDPASYTOPCASTHO of Havells or equivalent in Philips all as specified including taking out old one.

Supplying,fixing and testing of Street lights LED type 80 W pressure die cast aluminium housing luminaires complete (maintaining minmum system lumen-7000) on 9 mtr pole LED with IP protection 66 of Model no ENDURACITYLINERNEOMPSL80WLED757PASYBOTG or equivalent in Philips all as specified including taking out old one .

Supply & fixing high power LED Flood light fitting 100W complete ( mainting minmum system lumen-13700) on 11 mtr poles with IP protection 65 of Model No. JETAIRLISFLS100W757SYMLTG of Havells or equivalent in Philips inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 200W complete 11 mtr poles with IP protection 66 of Model No. JETAVALOURFL200WLED 757MODNBLTGof Havells or equivalent in Philips inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 100W complete 11 mtr poles with IP protection 65 of Model No. JETAIRISFLS100WLED 757SYMLTG of Havells or equivalent in Philips inculding all fixing arrangement such as nuts&bolts,clamps and 50 x 50 x 5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 200W complete 11 mtr poles with IP protection 66 of Model No. JETA VALOURFL200WLED757PINBLTG of Havells or equivalent in Philips inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 180W complete 11 mtr poles with IP protection 66 of Model No.JETA VALOURFL 180W LED 757PINtTNBLTG of Havells or equivalent in Philips inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 50W complete 11 mtr poles with IP protection 66 of Model No. BJFL 50W LED I of BAJAJ or equivalent in HAVELLS inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Supply & fixing high power LED Flood light fitting 100W complete 11 mtr poles with IP protection 66 of Model No. BJFL 100W LED I of BAJAJ or equivalent in HAVELLS inculding all fixing arrangement such as nuts&bolts,clamps and 50x50x5 mm and 60 cm long angle iron bracket dully two coat super enameled paint over one coat of red oxide etc. complete all as specified and directed by Engineer-in-Charge including taking out old one.

Taking down old unserviceable/ defective steel tubular Security street light fitting and Supply & fixing Solar smart intergreted Solar Street light with built in Mono Crystalline Panel, lithium ion battery (LiFePO4), MPPT charger controller, PIR sensor with colour temp 600-6500 K with 60 W cpacity LED light fittings with hybrid switch, Mono crystalline solar panel,42 Ah lithium ion battery fixed on 9.0 meter steel tubular pole complete with PCC foundation etc complete all as directed & specified. Make: M/s BAJAJ/Surya/CG/Philips/ Havells.

Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 45 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as directed & specified. Make: M/s BAJAJ Model BGCP 45 W LED WW or equivalent in CG/Philips/ Havells. Note: The rate inclusive of GI pipe, PCC , cableloop in out box etc complete

Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 45 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as directed & specified. Make: M/s BAJAJ Model BGCP 45 W LED WW or equivalent in CG/Philips/ Havells. Note: The rate inclusive of GI pipe, PCC , cableloop in out box etc complete

Taking down and Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 Volts grade 3.5 core XLPE (FRLS) , armoured, electric power cables (heavy duty) with aluminium conductor of the following size : Note: The rate quoted inclusive of termination at ends with suitable aluminium lugs whereever required. Make : Havells / Polycab / Finolex

50 sqmm 3.5 core

25 sqmm 4 core

16 sqmm 4 core

10 sqmm 2 core

Supplying, fixing and testing of timer switch 65A 3 pole / 230V analog time switch with connecting items fixing on pole / wall / panel all as directed. Make : Indoasian cat part no TL065ASO or equivalent in Havells/L&T/BCH including taking out old one .

S&F MCB TPN 63 amps 415 volts C curve complete all as specified and directed including taking out old one. Make : L&T /legrand/Schnieder

S&F MCB SPN 32 amps 230 volts C curve complete all as specified and directed including taking out old one. Make : L&T / Legrand / Schnieder

S&F MCB SPN 6 to 32 amps 230 volts C curve complete all as specified and directed including taking out old one. Make: L&T / legrand /Schnieder

Taking down defective street light fitting of any size /type/ capacity from height of pole/ walls/ height mast of any location exceeding 9 M height from ground level for reapir work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as directed by Engr-in-Charge. Note : (a) Spares like ballast, lamp, starter, capacitor , igniter, holders, lamp holder, etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder& other T&P required etc shall be arranged by the contractor (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts,cirle clips, clamps etc. if required at site.

Supply only the following spares for street light fittings (Make: Phillips/ Wipro/Havells)

LED driver 200w

LED driver 90W

LED driver 150 W

LED driver 45 W

LED driver 60/70W

LED driver 9 W

Excavating in trenches n. exc.1.5 m wide and n. exc.1.5 m in depth for foundation, trenches for laying cables / pipe line etc. and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated materials to a distance n. exc. 50m and depositing where directed at a level n. exc 1.50m above the starting point complete all as specified and as directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and as directed.

Supply and spreading clean dry sand for cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

Supply and laying sub class 'B' bricks of old size (23x11x7cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

M & L Plain cement concrete 1:4:8 type C2 (using 40 mm aggregrate) as in foundations filling mass concrete complete all as specified and as directed.

M &L for cement concrete PCC 1:2:4 type B1 (using 20 mm aggregrate) as coping of poles complete all as specified and as directed.

Supply and fix or laid in road crossing/ fixed to poles, GI Pipe of 50 mm size light grade for protection of cable complete all as specified and as directed.

Cutting trench through road/ wall to a width of 20cm and depth of 30cm for inserting GI protection pipe for drawing cable and filling back the trench with PCC 1:3:6 type C1 complete all as specified and as directed.

M&L for fixing in repair adhesive sticker radium type red coloured water resistant of approx 2 inches width around the circumference of pole at a approx height of two meters complete all as specified and as directed.

Repairs to High Mast/mid mast pole motor of Capacity 1.0 HP / 0.75 KW 415 Volts 50 Hz 3 Phase 930 RPM and necessary re-winding with super enamelled copper wire all as per existing and servicing/greasing of reduction gear box complete all as specified and as directed.

Repair/ Maint of the control panel of High mast / Mid mast and replacement of all unserviceable parts such as contactors / timers etc. complete including painting with a coat of synthetic enamel paint complete all as specified and as directed.

Repairs to High Mast/ mid mast of 12.5 mtr to 16 Mtr height lantern carriage / winch,checking for movement, inspecting the alignment, replacement of broken / defective SS wire roper of size 6 mm 7/19 construction complete, replacement of 5 core 2.5 Sqmm flexible copper conductor, ERP insulated PCP/PVC sheathed trailing cable complete, testing & commissioning all as specified and as directed.

SAI ENGINEERING WORKS

R AND A ASSOCIATES ENGINEERS CONTRACTORS

SRI MAHALAKSHMI CONSTRUCTIONS

KIRON ENGINEERING CORPORATION

DELTA CONSTRUCTIONS

RAJESH ENTERPRISES

SUPREET CONSTRUCTIONS

M/s SRINIVASA REDDY CONSTRUCTIONS

P VENKATA RAO

BHARGAVI ENGINEERING CONSTRUCTIONS