Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.5 L+₹63,436 (5.84%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹11.5 L+₹63,436 (5.84%)Rejected-AOC | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | ag L2 | Murugesan.N L3 | MOHANAN T L1 |
|---|---|---|---|---|---|---|
| 1.00PHC Mace | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 8.56 | cum | 200 ₹1,711.2 Lowest | 319.07 ₹2,729.96 | 300.36 ₹2,569.88 |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 5.62 | cum | 6,000 ₹33,696 | 6,059.22 ₹34,028.58 | 5,704 ₹32,033.66 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.89 | cum | 8,000 ₹15,152 | 8,192.3 ₹15,516.22 | 7,712.03 ₹14,606.58 Lowest |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.19 | cum | 8,450 ₹18,480.15 | 8,838 ₹19,328.71 | 8,319.88 ₹18,195.58 Lowest |
| 1.00 | 50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | 4.11 | cum | 8,000 ₹32,896 | 7,668.69 ₹31,533.65 | 7,219.11 ₹29,684.98 Lowest |
| 1.01 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 15.84 | sqm | 245 ₹3,880.8 Lowest | 342.52 ₹5,425.52 | 322.44 ₹5,107.45 |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 852.6 | kg | 198 ₹1,68,814.8 | 204.83 ₹1,74,638.06 | 192.82 ₹1,64,398.33 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 220.5 | kg | 165 ₹36,382.5 | 165.91 ₹36,583.16 | 156.18 ₹34,437.69 Lowest |
| 1.01 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 8.82 | cum | 8,000 ₹70,560 | 7,600.82 ₹67,039.23 | 7,155.23 ₹63,109.13 Lowest |
Tender Value
₹13.0 L
EMD Value
₹32,542
Closing Date
18 Oct 2025, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER LID AND EW VSUBDIVISION KATTAPPANA
Annual Plan-Kattappana BP 2025-26 Pro No 58 -Upputhara CHC Maintenance in Upputhara GP
2025_LSGD_806937_3
04/2025/AE/LIDEW/KTPBP
Open Tender
Civil Works - Roads
Item Rate
KATTAPPANA
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹32,542
Yes
2 Dec 2025
9 Oct 2025
21 Oct 2025
9 Oct 2025
18 Oct 2025
9 Oct 2025
Amount
PHC Mace
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
11.40:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
OD301897/2025-2026:Roofing with GI trafford profile sheet 0.4mm thik poweder coated with overlaps of 150mm at ends and SS screws including plain washers and bitumen washers etc complete
OD301900/2025-2026:Supplying and fixing partition walls of anodised aluminium fabrication works with anodised aluminium sections(ISO Certified)for outer frames and panelling with 6mm thick Nowapan sheet and top panelling with 4mm thick float glass including necessary clips,rubber beeding,cleet, screws.etc.complete.
OD301901/2025-2026:Supplying and fixing door shutters of anodised aluminium fabrication works with anodised aluminium sections (ISO certified )for outer frames and bottom panelling with 6mm thick Nowapan sheet and top panelling with 5.5mm thick float glass including necessary clips ,rubber beedings,cleet,screws etc complete.
ag (BID ID -2390268)
Murugesan.N (BID ID -2396577)
Bidder Name
Murugesan.N
MOHANAN T
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1344594.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
sbd.pdf
Tender Documents • 1.77 MB
BOQ_1344594.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .