HWPK/CIVIL/2024/127

Amount

Dismantling CC/old terrazzoo flooring manually or by mechnical means including disposal of material within 500m lead as per specifications and as directed by the EIC.

Providing and laying in position Cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm maximum size) including consolidation, finishing, curing etc. complete as per specifications including the cost Form work shuttering, centering, (but excluding cost of steel reinforcement) complete as per the specification and as directed by the Engineer.

Dismantling old plaster or skirting raking out joints and cleaning the surface, prepration of surface to receive new tile skirting/dado including disposal of rubbish to the dumping ground at colony disposal yard as per specifications and as directed by the Engineer.

Plastering with 15 mm cement plaster in 1:4 mix (1 cement: 4 fine sand) at all heights including providing scaffolding, curing etc. complete as per specifications and as directed by Engineer in charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking at colony civil office store complete as per the specifications and as directed by EIC.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having section profile size 48x40 mm (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges or including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws in case of cup board Shutter fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge.

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.

Providing & fixing steel finish SS soap dispenser of 1 liter capacity & minimum 700 gm weight with CI push cock arrangement including all fittings & fixtures complete as per the specifications and as directed by EIC.

Providing & laying machine cut machine polished natural stones as mentioned for the following for kitchen/counter platform topping, vertical support and facia etc including necessary cement mortar for backing/bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing, etc., as required including cutting of stone, slabs, wastage, making cut outs, making grooves in wall & fixing slab wherever required etc., all as per specifications and as directed by Engineer-in-Charge. Note: Top exposed surface on plan & exposed vertical finished face shall be measured for payment in sqm.

For kitchen/vertical shelf/Counter platform top, upto 750mm wide and upto 1800mm length in single piece consisting machine cut mirror polished on one side, 18mm thick Jet black granite at top and in bottom 25 mm thick kota stone fixed with 40 mm thick 1:4 cement mortar, between two stone slabs (Double stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges, providing support to the top by providing angle supports etc. complete as per the specifications and as directed by EIC.

For kitchen/ Counter platform / horizontal and Vertical facia upto required width for exposed surfaces with 18mm thick Jet black Granite stone machine cut machine polished on one side fixed with epoxy resin base (Araldite adhesive or equivalent) including round moulding and polishing the edges etc. complete as per the specifications and as directed by EIC.

For vertical support of Counter/platform, consisting of 18mm thick machine cut mirror polished on one side Zet black Granite stone at exposed face and 25mm thick machine cut machine polished on other side Kota stone slabs sandwitched ( Double stone sand witched type ) between the stones with 40 mm thick CM 1:4 including with epoxy resin base (Arladite or equivalent) including fixing by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Providing and fixing 20 to 25 mm semi polished dressed Kota stone slab of approved quality fixed in Cupboard partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Note: Exposed slab will only be measured for payment.

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete as per the specifications and as directed by EIC.

Providing and fixing SS fancy handles of 4" size approved pattern & quality with minimum weight of each handle 70 gm in cupboard /ward robe shutters, including fixing with necessary screws etc. complete as per the specifications and as directed by EIC.

Painting with 1st quality acrylic emulsion paint interior gade of (ready mixed) of approved brand,manufacturer of required shade and colour two or more coats including applying additional coats wherever required to achieve even shade and colour,Two or more coats on new work or including prepartion of surface, filling the unever surfaces with J K or eqivailant make wall putty, sand papering, making the surface smooth and even etc. complete as per manufacturer’s specification, cleaning of paint splashings and droppings from floors, doors & windows etc. complete and as directred by the Engineer.

Painting old steel/wood work/ plastered surface with two or more coats of synthetic enamel paint using 1st quality synthetic enamel paint of Asian Paints or equivalent including applying additional coats wherever required to achieve even shade and colour, including preparing surfaces, scaffolding, filling with putty wherever required & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Removal of old white wash/colour wash by thoroughly scrapping using wire brush & other suitable tools and tackles, sand papering the entire wall surface completely exposing the bare wall, cleaning with fibre broom and washing entire surface with water, preparing the surface even and smooth including necessary repairs to patches, scratches, including necessary scaffolding etc. complete as per specifications and as directed by the Engineer.

Applying a coat of cement primer as per manufacturer’s specifications etc. and as directred by the Engineer.

Providing and applying white cement based putty of average thickness 1 mm, Birla white wall care putty over the plastered wall surface to prepare the surface even and smooth complete including applying additional coats wherever required to achieve evensurface, including preparing surfaces, scaffolding & cleaning etc. complete all as per specifications & as directed by the EIC.

Providing & fixing of Stainless Steel Flexible folding Cloth Hanger with 3 Nos. of Prongs with minimum weight of 100 grams including all required screws etc. complete as per the specifications and as directed by EIC.

Providing and laying at all floors and levels vitrified floor tiles of 1st quality of H&R Jhonson /somany/Kajaria/Nitco/RAK India or other equivalent approved make in all colours, shades and patterns and of thickness as per manufacture's specifications, with water absorption less than 0.08% and conforming to IS: 15622, laid directly over existing floors/tiles using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness or as needed as per site conditions in respect of flooring laid to line, level and required slope as directed and fixed over 12 mm thick backing cement mortar 1:3 in respect of skirting, close jointed and grouted with white cement based Tile Grout of approved make and matching shade with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, relevent IS code & as directed by the EIC.

Providing and laying vitrified floor tiles in 600X600mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, fixing with cement based high polymer modified quick-set tile adhesive(water based) confirming to IS:15477 in avg 3mm thickness including grouting the joints with white cement and matching pigments etc. all complete.

In Dado / skirting with vitrified tiles of size 600 x 600 mm with water absorption less than 0.8% & confirming to IS:15622 of approved brand & manufacturer laid with cement based high polymer modified quick set tile adhesive(water based) confirming to IS:15477 & grouted with pigment of matching shade & finishing the top of skirting etc. complete, including wastage, disposal of debris at disposal yard in colony etc. complete.

Supply of King size bed having headboard size 1.93 (W) x 0.91 (H) m and footboard size 1.93 (W) x 0.42 (H) m, side rails/board 2.06x 0.3m & 1.93X0.3 m, cross bracing in centre with 1.93X0.3 m & 2.06X0.3 m all made up of 30 mm thick BWP-COM block board ith headboard & footboard connected to side rails/boards through nut bolt arrangement, ply below mattress 2.06 (L) x 1.93 (W) m made up of of 12 mm BWR AA ply including providing and fixing with 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, of approved shades, colour and make in desired pattern, including cost of adhesive of approved quality on exposed plywood & Blockboard (all visible Front & back face, edges & sides except mattress bottom ply) & synthetic enamel paint on internal faces including providing and fixing all required nut, bolts, screws, end caps, beading, polishing if required etc. complete all as per the specifications, drawing & as directed by EIC.

Providing and placing of 5" PU foam mattress suitable for King size bed preferably 78"X72" size in required shade as directed by EIC having normal top matress, medium soft comfort level, Knitted Upholstery Material, reinforced edges equivalent to KURLON make Jade model with Queen Size Waterproof Mattress Protector, two nos. Polyester Solid Body Pillow etc. complete as per the specifications and as directed by EIC.

Supply of single bed having headboard size 1.02 (W) x 0.91 (H) m and footboard size 1.02 (W) x 0.42 (H) m, side rails/board 2.06x 0.3m & 1.02X0.3 m, bracing in long side with 1.02X0.3 m all made up of 30 mm thick BWP-COM block board ith headboard & footboard connected to side rails/boards through nut bolt arrangement, ply below mattress 2.06 (L) x 1.02 (W) m made up of of 12 mm BWR AA ply including providing and fixing with 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, of approved shades, colours & make in desired pattern, including cost of adhesive of approved quality on exposed plywood & Blockboard (all visible Front & back face, edges & sides except mattress bottom ply) & synthetic enamel paint on internal faces including providing and fixing all required nut, bolts, screws, end caps, beading, polishing if required etc. complete all as per the specifications, drawing & as directed by EIC.

Providing and placing of 4" PU foam mattress suitable for single size bed preferable 78"X36" size in required shade as directed by EIC having normal top matress, medium soft comfort level, Knitted Upholstery Material, reinforced edges equivalent to KURLON makeWaterproof Mattress Protector, one nos. Polyester Solid Body Pillow etc. complete as per the specifications and as directed by EIC.

Fabrication, providing & installation of Double sliding Drawer Bedside Table of size 19.68 (W) x 15.75 (D) x 17.72 (H) inches made up of 12 mm thick BWR grade & AA type plywood confirming to IS 303 & IS 710, including providing and fixing heavy duty SS sliding channel for sliding drawers, providing & fixing 3" fancy SS handles of both drawers, providing and fixing with 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, of approved shade, colour and make, including cost of adhesive of approved quality on exposed plywood (all visible face, edges & sides) including providing & fixing with wooden legs, screw, nut, bolts, beading & polishing on the inner drawers etc. complete all as per the specifications, drawing & as directed by EIC. Note: Minimum 2" margin shall be left from the bottom of the table for bottom drawer & this 2" opening shall be finished with ply & lamination sheets.

Providing and installation of Wall hanging Dressing table of Length ( 68.5 Cm) x Breadth ( 12 Cm) x Height( 150 Cm) made up of 12 mm thick BWR grade & AA type plywood confirming to IS 303 & IS 710 including providing and fixing with frameless smooth edge 6 mm thick mirror (Minimum size of 300 x 1400 mm ) pasted with silicon glue & 5 Nos. multi functional round edges shelves made up of 12 mm thick BWR grade & AA type plywood (Minimum size 300x 100mm), MInimum 2 nos. bangle holder & minimum 2 hanging hooks including providing and fixing with 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, of approved shade, colour and make, including cost of adhesive of approved quality on exposed plywood (all visible face, edges & sides) including providing & fixing with screw, nut, bolts, beading & polishing if required etc. complete all as per the specifications, drawing & as directed by EIC.

Supply and Installation of fabric polyester Vertical Venetian Blinds of superior quality with slat width 100mm & 2mm thickness of reputed make with approved colour, shade and fabrics in semi transparent shade including the cost of necessary powder coated aluminium channels/ head rail/brackets/end caps, nylon carrier truck with SS link, nylon mono command with glass fibre wand, rollers, metal cord weight, metal chain and other accessories etc all complete as per manufacture’s specifications and as per the directions of Engineer-In-Charge. Measurements shall be taken as the frontal area of the blinds for the purpose of payment.

WAGH BROTHERS (BID ID -3134591)

M/S Singh Brothers (BID ID -3134557)