PROVN OF SOLID WASTE MANAGEMENT SYSTEM AND GARBAGE DISPOSAL SYSTEM AT MISSAMARI MIL STN UNDER GE MISSAMARI

Amount

Supply ,installation,testing & Commisioning for Killwaste (Incinerator) 100 Kg/Hr fuel free Solid waste disposal unit with emmission control device which works on Air Rotating Technology destroys general solid waste after a simple segregation by controlled combustion using scientifically regulated supply of atmospheric oxygen will convert solid waste into ash, heat, steam and gas causing minimal environmental impact x complete all as specified and directed. Note: The quoted rate also includes the cost of Annual maintenance Contract for 2 years complete all as specified and directed. Make: KILLWASTE-80EWD(Confirming TO 100 kg/hr -(80D+20W) ) of Make ORNATE Naturale or of equivalent make.

Supply of 240 Litre plastic wheeled outdoor Dustbin which is heat and crack resistant and UV stabilized ( 200Kg capacity) of red , blue and green in color complete all as specified and directed.

Supply of Trolley Big ( 100Kg capacity) consisting of double tyre, pipe frame metal body wheel barrow of size 3x2x1 foot complete all as specified and directed.

Supply of Trolley Big ( 50Kg capacity) consisting of single tyre, pipe frame metal body wheel barrow of size 50 x 40 x 30 cms complete all as specified and directed.

Supply of 1.5 litre cast Iron kadhai complete all as specified and directed.

Supply of Spade (Fauda) consisting of 202-grade stainless steel blade with wooden handle complete all as specified and directed.

Supply of gardening spade Iron Spade/shovel (Belcha) with steel handle complete all as specified and directed.

Supply of 3 inch metal blade Khupri complete all as specified and directed.

Supply of heavy weight white sheet Iron Tray ( Big) of rectangular shape and of size 22 x 15 inches complete all as specified and directed.

Supply installation testing and commissioning 1HP pump motor set with stainless steel impeller with pump head 40 mtr with built in thermal overload protection with 30 ltr per minute complete all as specified and directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for :

(a) One light point controlled by one, one way switch 5 Amps complete all as specified and directed.

(b) One 3 point 5 Amps socket outlets point controlled by one switch on the same board complete all as specified and directed.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No 11 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board complete all as specified and directed.

S & F Switch piano flush type (white) single pole one way 5 Amp, 230 Volts complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amps (white) complete all as specified and directed.

S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one (white) , 230 volts complete all as specified and directed.

S&F Switch socket combination 2 in 1 3 pin (white), 15 Amp flush type universal complete all as specified and directed.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm (white) complete all as specified and directed.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed.

Supply installation testing and commissioning 1HP Pump motor starter with MCB controlled with Digital display, On / Off switch, Indicator, MCB, C.T, Terminal, PCB, S-Capacitor, R-Capacitor, Timer switch Digital A/V meter Etc. complete all as specified and directed.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure complete all as specified and directed.

S & F MCB TPN of Capacity 63 Amp 415 volts suitable for fixing in MCB TPN DB complete all as specified and directed.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as specified and directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as specified and directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified and directed.

Supply & Laying LT heavy duty UG Cable of size 16 Sqmm 4 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc complete all as specified and directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I complete all as specified and directed.

Supply ,installation,testing & Commisioning for 20 Ton Pressure Single Chamber Single Cylindre Bailing Press Machine with Bale weight of 40 to 60 Kg , 80 litres of oil tank capacity ,3 phase 5 HP Motor ,1440RPM with electric starter recommended by OEM complete all as specified and directed.

Supply,installation,testing & Commisioning for 3 Phase 415 Volts , 3 HP High Capacity Garden Shredder of capacity 150-200 Kg Per Hour alongwith electric starter as recommended by OEM , complete all as specified and directed.

Supply,installation,testing & Commisioning for 3 hase 415 Volts , 5 HP Industrial grade Shredder for wet waste along with electric starter recommended by OEM having working capacity of 300 to 400 Kg per Hour complete all as specified and directed.

Supply,installation,testing & Commisioning for Digital weighing Machine 100 Kg and 500 Kg complete all as specified and directed.

S&F 1HP 35CC Power Pressure Sprayer with 4 Stroke Engine alongwith starter and 50 Meter Hose Pipe for agriculture ,tree gardens and cleaning & washing having pump of brass material complete all as specified and directed.

S&F 4 Stroke Engine water pump with 8 Meter suction and 32 mtr head engine capacity 206 CC and Max Engine Speed 4000 r/min complete all as specified and directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Casing Caping ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs complete all as specified and directed.

S & F sheet metal enclosure MCB DB TPN 6 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure complete all as specified and directed.

S & F MCB TPN of Capacity 40 Amp 415 volts suitable for fixing in MCB TPN DB complete all as specified and directed.

EASTERN ENVO PROTECT

S H ENTERPRISES