Upgradation from High School to Higher Secondary School (Arts Stream) at Govt. (SSD) High School, Dhamanpur, Kalahandi, Odisha

1 CIVIL WORK

i Art's College = 70501059.06

ii. Girl's Hostel = 51170797.48

iii. Boy's Hostel = 51170797.48

TOTAL (1) = 17,28,42,654.01

2 ELECTRICAL & FIRE WORK

i Art's College = 12020079.44

ii. Girl's Hostel = 4169540.62

iii. Boy's hostel = 4169540.62

TOTAL (2) = 2,03,59,160.68

i Art's College = 4155625.64

ii. Girl's Hostel = 2931619.37

iii. Boy's hostel = 2879557.93

TOTAL-(3) = 99,66,802.93

4 TOTAL COST (1+2+3) = 20,31,68,617.62

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Arts. Collage

Item of Work Unit Quantity Rate Amount

1 Site Clearance

Cleaning & grubbing road land including uprooting rankvegetation, grass ,bushes,

shurbes, sapling and trees girth upto 300mm, removal of stumps of trees cut earier

and disposal of unsevicable materials and stacking of servicable materials to be used sqm 3110.68 9.74 30282.47

or auctioned up to lead of 1000 meters including removal and disposal of top organic

soil not exceeding 150mm thickness.

2 Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead and 1.5m lift

a) including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying Cum 1923.21 319.66 614776.00

in layers not exceeding 0.3m in depth and as per specification complete.

Up to (1.5m to 2m depth) Cum 626.15 350.11 219217.12

3 Sand Filling

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper

gradient including cost of all materials, conveyance, all taxes and royalties, loading Cum 327.28 1484.24 485762.61

and unloading, including cost of all labour, sundries, T & P etc. All complete as per

directions of the Engineer -in-charge.

4 Back Filling

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited

layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cum 1274.68 177.59 226369.66

cost of all labour, sundries T & P etc complete in all respect as per the direction of

Engineer-In-Charge.

Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean

hard black crusher broken granite stone metal of approved quality and from approved

quarry including hoisting, lowering and laying concrete in layers not exceeding 15

cm. (6") thick to the required level ramming, watering, curing etc. complete including Cum 72.73 8246.69 599773.49

cost, conveyance, royalties of all materials with all labour and T&P required for the

work etc. complete in all respect and as per the direction of the Engineer-in-charge.

6 Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment Confirming to IS

6313 (Part-II) and creating chemical barrier under and around the column pits, wall

trenches, basement excavation top surface of plinth filling, junction of wall and floors

along with external perimeters of building, expansion joints, surrounding the pipes

and conducts etc. at the rate at 7 ,5 liter per sqm on vertical surface and 5.0 liter per

sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per sqm 2078.97 94.40 196254.77

lit of water cost of all materials, labour,conveyance, T&P , all taxes and hire charges

of machinaries as per direction of Engineer-incharge. (Make :- HI-Solution or Smart

Care Pest Control or Bharat Pest Eradicators)

7 Fly Ash brick(1:6)

Fly Ash brick masonry in cement mortar (1:6) in Substructure using Fly Ash bricks of

25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less than 75 kg./sqcm

with dimensional tolerance ± 2% including splays cutting circular moulding

chamfering and corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all materials with

all labour,labour cess and T & P required for the work complete in all respect as per

direction of Engineer-in-Charge.

Foundation cum 517.66 7,683.05 3977235.20

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as

per approved designs and drawings having a minimum compressive strength (in work

test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted

in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp sand for mortar of approved

quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds

25 %) to be mixed in concrete mixture with Portland slag cement (PSC) including

hoisting, lowering, laying and compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after dismantling and removing

debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc.complete in all respect as directed

by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening, cutting, bending etc. of

M.S. rods or tor steel tying the grills and placing in proper position.

Foundation and plinth

Footing Cum 871.77 11842.86 10324247.97

Column (Below Plinth) Cum 9.99 22631.56 226089.31

Plinth beam Cum 116.71 12865.07 1501494.95

Ground Floor

Column Cum 61.92 22631.56 1401346.33

Staircase Cum 48.64 22484.71 1093712.56

Lintel Cum 29.20 20826.28 608063.60

Chhaja Sqm 16.22 1721.30 27919.51

Roof Beam Cum 143.73 22631.56 3252857.07

Roof Slab Cum 244.40 20313.76 4964708.09

Terrace Floor

Column Cum 9.47 25018.14 236946.76

Lintel Cum 3.04 22851.73 69412.12

Roof Beam Cum 14.18 25018.14 354632.07

Roof Slab Cum 15.97 22236.73 355148.44

9 Reinforcement

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary

steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL

(grade Fe-500D) etc. including bending, binding, welding and jointing if necessary

and tying the grills and placing in position as required for R.C.C. Work and for

providing fan hooks as required, hoisting, lowering, laying including cost,

conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and

labour required for the work for bending, binding and tying the grills in all floors with

labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or

tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Foundation and plinth qtl 1076.49 10443.07 11241861.29

Ground Floor qtl 720.17 10443.07 7520748.12

Terrace Floor qtl 61.63 10481.74 645989.60

10 FLY ASH BRICK(1:6)

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks

of 23 Cm. x 11 Cm. x 8 Cm size having a crushing strength of not less than 75

kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding

chamfering and corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all materials with

all labour,labour cess and T & P required for the work complete in all respect as per

direction of Engineer-in-Charge.

Ground Floor cum 423.02 7728.29 3269250.10

Terrace Floor cum 120.73 8165.81 985858.53

11 FLY ASH BRICK(1:4)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Providing Fly ash bricks masonry work using 23 Cm. x 11 Cm. x 8 Cm having

crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the

bricks in water before use in all necessary projection splays cutting, circular

moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading

and unloading of all materials & cost of all labour, scaffolding ,watering & curing

,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

Ground Floor cum 20.63 8288.36 170970.64

12 16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened

and washed sharp sand for mortar and finished smooth to the rough surface of walls

in all heights after racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost, conveyance, royalties of

all materials with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 753.75 373.36 281423.71

Terrace Floor sqm 760.45 386.85 294181.00

13 12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened

and washed sharp sand for mortar and finished smooth to the rough surface of walls

in all heights after racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost, conveyance, royalties of

all materials with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 3159.04 266.55 842041.41

Terrace Floor sqm 197.14 271.98 53618.33

14 6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened

and washed sharp sand for mortar and finished smooth to R.C.C. work after closed

deep chipping & slurry treatment including watering and curing, rounding of corners,

providing grooves where ever necessary with cost, conveyance, royalties of all

materials with cost of all labour, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 1964.37 287.34 564445.61

Terrace Floor sqm 127.77 293.68 37523.29

15 Water Proofing

Waterproofing application:- Providing and application of two component polymer

modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm

The membrane should have Elongation equal or more than: 30% , Crack Bridging

ability : Up to 1 mm, Adhesive strength: 1.0 N/mm² @ 28d, Tensile elongation: 60%

@ 20°C, Shore A Hardness >85 (between 3 - 7 days) etc. as per direction of E.I.C

(For longer span, in terrace panel of 4m*4m should be done by groove cutting, and

filling with PU Sealant)(Make:MYK / Fosroc/Pidilite)

Terrace sqm 1836.60 548.23 1006875.54

16 Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2)

using 6mm size black hard granite crusher broken chips and screened & washed sharp

sand for mortar and finished smooth to the rough surface of slab including watering

and curing with cost, conveyance, royalties of all materials with cost of all labour,

labour cess and T&P required for the work etc. complete in all respect as directed by

the Engineer in charge.

Terrace sqm 2092.14 616.99 1290822.35

17 Vitrified Floor Tiles

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Providing full body matt finish vitrified tile flooring using vitrified tiles having

thickness of min 10mm conforming to IS 13755 of 1200x600 (shade to be decided as

per Ama Hospital scheme) (homogeneous) of premium quality (JOHNSON /

SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick

bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and

washed sharp sand for mortar and fixing with neat white cement slurry,grouting the

joints with neat white cement slurry mixed with required quantities of pigments of

approved make to match the shades of the vitrified tile if required , watering and

curing for 21 days, including cost, conveyance, loading, unloading, royalties and

taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the

work, complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor sqm 1837.64 1641.53 3016541.69

18 Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to

10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved

make (JOHNSON/ SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge

in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with

neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties of all materials

all labour, labour cess complete in all respects.

Ground Floor sqm 148.24 1621.86 240423.32

19 Granite Flooring

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm thick) in

floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed

with neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties of all materials

complete in all respects as per direction of Engineer-in-Charge.

Ground Floor sqm 219.57 3445.19 756459.71

20 Granite Skirting

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm thick) in

Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with

neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all

materials complete in all respects as per direction of Engineer-in-Charge.

Ground Floor sqm 7.05 3617.48 25514.08

21 Ceramic Toilet tiles

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm x40 cm in floors

of size of approved make with 20mm thick bed of cement mortar (1:4) jointed with

neat cement slury mixed with pigment to match the shades of the tiles complete

including cost of all materials,Labour T&P etc required for the work .

Ground Floor sqm 137.89 2668.79 368000.03

22 Ceramic Skirting

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps on 12 mm

thick cement plaster (1:3) Jointed with neat cement slury mixed with pigments to

match the shade of the tiles including rubbing and polishing including cost of all

meterials etc. complete.

Ground Floor sqm 430.14 2436.71 1048134.52

23 UPVC SLIDING DOOR

Sliding upvc door sqm 2.52 9903.50 24956.83

24 Fire Door

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supply, Installation, testing and commissioning of 120 minutes of metal fire rated

doors (Saint Gobain or equivalent) with vision panel 400*900 mm having 11mm

thick contra flame door lite as per IS 3614 part-2:1992 for stability and integrity.

Pressed Galvanized steel confirming to IS277 specification. Door tested 7 approved

in CBRI for maximum rating of 2hrs. Produced from 1.6 mm thick galvanized steel

sheet formed to double rebate profile of size 105*60mm & 143mm* 57mm (+/-

0.3mm) with a maximum bending radius of 1.4 mm. The door frames may be built

into the brick or block walls using corrugated “T” Anchors not welded to the frame

(first fix). Frames may also fixed on plastered openings with the help of metallic #VALUE!

expansion shield with counter sunk screw (second fix). Door frames are supplied to

knock down form with butt joint for bolted assembly at site. Constructed from

1.20mm thick galvanized steel sheet formed to provide a 45mm thick fully flish,

double skin door shell with lock seam joints at stile edges. Internal Reinforcements

are provided at top, bottom and stile surrounds. The internal construction of the door

varies with the degree of Fire Rating as tested. For doors having overall height in the

excess of 2300mm the shutters shall essentially have double latching.

Ground Floor sqm 22.05 23951.13 528122.47

25 UPVC DOOR

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using

UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x

60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion

peofile capable of mounting single glazing system, structurally reinforced with hot

dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated &

welded through fusion welding the door sash shall be fitted with 12mm thick WPC

Board of Greenply make duly fixed with EPDM weathering seal resistant accessories

like clipping locking system made of aluminium 1 No. per set of sashes and th

esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy

glazing/deglazing at site etc. including cost and conveyance of all material,

accessories, labour charges, materials and product conforming to ASTM D 638-

14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the

Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor sqm 103.14 11339.33 1169538.29

26 WPC Door Frame

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite )-

Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite

(Single Extruded Process ) material comparising of virgin PVC polymer of K Value

57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/

Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after

applying PVC solvent Cement & screwed with full body treaded star headed screws

having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified

Company, having good screw holding capacity ( Screw

Withdrawal strength of ( Min. 990 N ),Minimum Compressive Strength of 58

N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class

A category with property of being termite / borer proof , water / Moisture Proof &

Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia

and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge.

Material test certificate and authentication should be compulsory provided by the

manufacturing company. (Make- Rajashree, Amulya,Terra plast)

Ground Floor rmt 113.85 1709.34 194607.93

27 WPC Door Shutter

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium

40mm Casement series Door Unit with suitable aluminium extrude profiles. the

system is designed to accommodate 12mm clear Factory made single leaf Solid WPC

(Wood polymer) composite door shutter of 25mm thickcompacted with wood grain

finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be

used as core material for fitting the metal fittings such as tower bolts, aldrops,

handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall

be used for bending the core material, The material and process for manufacturing

the door shutters shall conform to RV-TIFAC composites Design Centre's standards

and specifications and the door shutters Conforming to relevant I.S.specification. The

finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/

Teak wood or any other colour using high quality pigments. Three heavy whight mild

steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of

shutter.

Ground Floor sqm 36.23 5667.35 205299.80

UPVC VENTILATORS

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured

using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm

for outer frames. 75mm x 60mm x 2.5mm for casement window sash profile capable

of mounting single glazing system, structurally reinforced with hhot dip galvanised

up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through

fusion welding the window sash shall be fitted with EPDM weathering seal resistant

accessories like clipping locking system made of aluminium 1 No. per set of sashes

and th esystem isto be installed at the site using anchor fasteners, silicon rubber

sealant,easy glazing/deglazing at site etc. including cost and conveyance of all

material, accessories, labour charges, materials and product conforming to ASTM D

638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the

Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor sqm 9.84 8395.70 82613.69

29 UPVC WINDOWS

Supplying and installing UPVC - 3 tracks sliding windows and 2 sashes (shutters)

with ss mesh sash dimension of 58 mm x 32 mm and sash dimension of 61mm x

37mm for windows with corners fusion welded, fully reinforced with Galvanized

steel of 1.2 mm to 2 mm. The sash will be fitted with 5mm reflective toughened glass

of make - Saint gobain/ AIS/Gardian/modi. The windows must be installed complete

with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass

packers) and with suitable water draining system. Application of Silicon sealant from

Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all

labour, sundries, T&P etc. complete in all respect as per approved drawing &

direction of Engineer-in-Charge. (Prominence / FENESTA/NCL VEKA LTD. /

Koemmerling/ DURAPLAST/Rajashree).

Ground Floor sqm 110.97 8748.10 970776.12

Terrace Floor sqm 5.04 130.84 659.43

30 M.S.Grill

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage

door, collapsible gates with top and bottom rails, steel windows, critical frames for

windows, stair case and parapet railing made out of M.S Square bar/ flat including

stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over

a coat of redoxide primer as per approved drawing and design with cost of all

materials & labour, labour cess, T&P, sundries etc. complete in all respect as per

specification & direction of the Engineer-in-Charge.

Ground Floor kg 2441.34 81.89 199926.22

Terrace Floor kg 110.88 81.89 9080.18

31 S.S. RAILING

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using

50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm

@ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3

rows in stair case as per approved design and specification, buffing, polishing etc

with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc.

required for the work complete in all respect as per direction of the Engineer-in-

charge.

Ground Floor kg 1249.22 351.42 438995.65

32 Synthetic Enamel Paint (Iron Work)

Painting two coat with approved synthetic enamel paint to new iron work over a coat

of Red oxide primer including cost, conveyances, royalties, taxes of all materials and

cost of all labour with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge).

Ground Floor sqm 120.81 219.24 26486.87

33 Synthetic Enamel Paint (Wood Work)

Painting two coat with approved synthetic enamel paint to new wood work over a

coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials

and cost of all labour with T&P required for the work etc. complete as per

specification & direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge).

Ground Floor sqm 36.23 312.94 11336.11

34 Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior

grade of approved make & approved shade over a coat of primer to make an even

finished surface in all floors and heights with all scaffolding and staging charges

including cost, conveyance, cost of all labours, T & P, sundries etc. as required for

the work complete in all respect as per the direction of the Engineer-in-Charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

Charge)

Ground Floor sqm 3159.04 116.70 368665.70

Terrace Floor sqm 197.14 118.35 23332.54

35 Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved quality primer to

make an even finished surface in all floors and heights to wall surface of approved

make and shade including sand papering, applying putty wherever necessary & cost

of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess,

T&P etc. complete as per the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge)

Ground Floor sqm 2718.13 126.91 344955.16

Terrace Floor sqm 888.22 129.43 114966.05

36 Cement Primer

Priming one coat with wall cement primer (water bound) to make an even finished

surface in all floors and heights to wall surface of approved make and shade including

sand papering, applying putty wherever necessary & cost of scaffolding, staging

charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as

per the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-

Charge)

Ground Floor sqm 5877.16 95.93 563819.18

Terrace Floor sqm 1085.36 98.29 106684.57

37 Putty

Finishing plastered surfaces of walls with cement based wall putty (Water based) of

approved make (JK White/ Birla white or equivalent make duly approved by

Engineer-in-Charge) and finishing the surface smooth and even by sand papering to

receive painting in walls, at all heights with staging wherever necessary with cost,

conveyance, cost of all labour,labourcess, all T&P etc. required for the work

complete in all respect as per the direction of the Engineer-in-charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Ground Floor sqm 5877.16 99.00 581850.30

Terrace Floor sqm 1085.36 99.00 107453.01

TOTAL Rs. 7,05,01,059.06

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Arts. Collage

Sl.No. Description of work Qnty. Unit Rate Amount

A. Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call

bell point with 1.5 sqmm FR PVC insulated copper conductor

single core cable in surface / recessed 1.6 mm thick PVC

conduit with modular switch and earthing the point with 1.5

sqmm FRLS PVC insulated copper conductor single core

cable including providing modular box with cover of requisite

number of modules including providing cover plates as

required.

a) Single light point controlled by one 6A switch or first light point

of group control.

b) Subsequent point of group control Each 159 559.32 88,931.88

2 Supplying and fixing two module steeped type electronic fan

regulator with proper modular plate switch box including Nos 117 553.42 64,750.14

connections etc. as required.

3 Supplying & fixing suitable size GI Box with modular plate and

cover in front on surface or in recess, including providing and

fixing 5pin 5/6 amps modular socket outlet and 5/6 amps

modular switch etc. as required.

4 Supplying & fixing suitable size GI Box with 6 modular plate

and cover in front on surface or in recess, including providing

and fixing 2 nos 5pin 5/6 amps modular socket outlet and 2nos

5/6 amps modular switch etc. as required.

5 Supply, installation, testing & commissioning of 6 / 16 Amp

Plug Boards consisting of a 16 Amp clip-in type modular switch

with indicator and a 6/16 Amp clip-in type modular shuttered

plug socket fixed on metallic concealed box including Nos 49 807.12 39,548.88

interconnections and making good the damages caused

complete as required and as per direction of Engineer-in-

charge.

6 Supplying, installation, testing & commissioning of 20 Amp AC

starter switch with 25 Amp modular socket outlet with 25 Amp

Plug on surface or in recess, on 2 Nos two module GI box with

plate etc. complete with direction of Engineer-in-charge.

Starter-Crabtree(cat no-ACT0202504) or equivalent.

7 Wiring for circuit/ submain wiring along with earth wire of

following size of FRLS heavy gauge PVC insulated copper

conductor single core cable in heavy duty PVC conduit laid in

surface/ recess as required.

a) 2X2.5 + 1X2.5 sqmm FRLS Cu wire Mtr 2172 201.78 4,38,266.16

b) 2X4 + 1X4 sqmm FRLS Cu wire Mtr 735 221.84 1,63,052.40

c) 2X6 + 1X2.5 sqmm FRLS Cu wire Mtr 300 259.60 77,880.00

d) 4X6 + 2X2.5 sqmm FRLS Cu wire Mtr 250 374.06 93,515.00

e) 4X10 + 2X4 sqmm FRLS Cu wire Mtr 300 523.92 1,57,176.00

B. Fan & indoor Fixtures - -

8 Supply, delivery and fixing of Ceiling fan hook box made out

of 18 swg GI sheet and containing 10 mm dia round ms bar

projecting atleast 150mm on either side & duly bent to

accommodate ceiling fan down rod bolt & having earthing

arrangement as per direction of Engineer-in-charge.

9 Supplying, installation, testing and commissioning following

type of light fixtures with dummy box for surface mounted

fixtures only, fans and exhaust fans with all accessories, as

required.(The colour temprature for fixtures shall be between -

3500 deg K & white in colour as per application) ( Use

antibacterial UV Light for blood bank rooms.)

a) Surface mounted 2'X2' LED fitting (3600 Lumen/ 36W) similar

to Wipro (CAT No:CRCO24R036HP65G1) / Equivalent of Each 62 5,599.10 3,47,144.20

Havells/ Philips.

b) Round Surface mounted LED fitting (1800 Lumen/ 18W)

similar to Wipro (CAT No: LD80-171-XXX-60-SM ) / Equivalent Each 24 2,466.20 59,188.80

of Phillips/ Havells.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

c) Round Recess mounted LED fitting (1800 Lumen/ 18W)

similar to Wipro (CAT No: LD80-171-XXX-60-XX ) / Each 10 2,920.50 29,205.00

Equivalent of Phillips/ Wipro.

c) Round Recess mounted LED fitting (1200 Lumen/ 12W)

similar to Wipro (CAT No:LD80-101-XXX-60-XX ) / Equivalent Each 33 1,805.40 59,578.20

of Phillips/ Havells.

d) Round Recess mounted LED fitting (900 Lumen/ 9W) similar

to Wipro (CAT No: LD80-530-XXX-60-XX ) / Equivalent of Each 8 1,357.00 10,856.00

Phillips/ Havells.

e) Linear Batten type wall mounted 4' LED fitting (2000 Lumen/

20W) similar to Wipro (CAT No:LL20-111-XXX-65AL1) / Each 227 1,545.80 3,50,896.60

Equivalent of Bajaj/ Wipro.

f) Led Bulb fitted with wall mounted Angle Holder (900 Lumen/ 9

W) similar to PHILIPS / Bajaj/ Wipro.

g) Compact Aluminium IP66 type 900 Lumen/10W LED

Bulkhead wall fitting Wipro (CAT No:LW21)/ Equivalent of Each 18 1,486.80 26,762.40

Bajaj/ Wipro.

h) Batten Type 10 watt Mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser,above

wash basin complete with all accessories etc. ( Make : WIPRO

Model No:LL20-111-XXX-60-NE or similar model of Each 5 649.00 3,245.00

PHILIPS/Bajaj/Havells or equievalant reputed make & model

A catagory ISI marked as approved. )

g) Supplying and fixing call bell/ buzzer suitable for single

phase,230 V, complete as required.

10 Supplying, installation, testing and commissioning of ceiling

fan (5 star rating) including wiring the down rod, earthing etc

as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/

Havells).

a. 1200 mm sweep Each 117 3,599.00 4,21,083.00

11 Supplying, installation, testing and commissioning of wall

mounted fan (5 star rating) including earthing etc as required

(Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).

a) 400 mm sweep 1300 RPM Each 1 4,558.34 4,558.34

11 Supplying, installation, testing and commissioning of Exhaust

fan (star rating) including louvres, Ceiling Rose & Electric

Connection as required. (Make -Bajaj/Usha/ Crompton/

Orient/ Khaitan/ Havells)

a) 300mm sweep 900 RPM Each 3 2,183.00 6,549.00

12 Supplying, installation, testing and commissioning of Heavy

Duty Exhaust fan (5 star rating) including louvres, Ceiling Rose

& Electric Connection as required. (Make -Bajaj/Usha/

Crompton/ Orient/ Khaitan/ Havells)

a) 300mm sweep 900 RPM Each 10 5,325.34 53,253.40

C. Panels, MDBs, DBs. MCBs -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC

sleeve, base channel, wiring with space heater, thermostat and

control MCBs shall be provided for all vertical sections of main

LT Panel, all hinged door shall be earthed through 2.5 sq mm

tinned braided, the incoming and outgoing feeders shall be

accommodated in a modular arrangement, detachable gland -

plates, adequate size cable alley, Sign writing, Painting,

Earthing, Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for

CT's etc. with all accessories including interconnections, earth

bus, Surge protection Device(SPD) etc. as required.(All the

incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

13 Main Distribution PANEL -

One (1) Incomer From Transformer - 160 Amp, 25 KA, FP

MCCB , One(1) set of – 160/5A , 15VA , CL 1.0, CT with 3

Nos Phase indicating lamps with control fuse/ MCB Digital -

other accesories.)

Busbar - 200 Amp Al busbar suitable for operation at 415 Volt,

50 Hz, 3 Phase Supply.

Twelve (12) - Outgoing Feeders for (5 No PDBs, 2Nos Lift

& 5 spare) each Comprising of

One (1) -63A TPN 25KA MCB with required other accesories. -

Eight(8) - Outgoing Feeders for (4 nos LDBs & Four

spares) each Comprising of

One (1) -32A TPN 25KA MCB with required other accesories. -

Four(4) - Outgoing Feeders for (Borewell & Three spares)

each Comprising of

One (1) -63A DP 25KA MCB with required other accesories. -

PANEL AS ABOVE Set 1 1,71,100.00 1,71,100.00

14 Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted -

including earthing etc. as required. (But without

MCB/RCCB/Isolator). (For all Floors LDBs, PDBs, ACDBs &

a) 4 way, Double door(4+12) Each 9 2,950.00 26,550.00

15 Supplying and fixing following rating MCBs/ Isolator in the

existing MCB DB complete with connections,testing and -

commissioning etc. as required

a) 63 Amps, FP 10 KA MCB (C-Curve) Each 5 3,543.54 17,717.70

b) 32 Amps, FP 10 KA MCB (C-Curve) Each 4 2,508.68 10,034.72

c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 108 468.46 50,593.68

16 Supplying and fixing 40 Amps rating,C series,10KA breaking

capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/

Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB

complete with connections, testing and commissioning etc. as

required as per direction of Engg.-in-Charge. . The MCB

should be Replacement Warranty will be 3 years.

17 Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA

Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9

in the existing MCB DB in the existing MCB DB complete with

connections as per direction of Engg.-in-Charge..The MCB

should be Replacement Warranty will be 3 years.

D. Cables, Cable Laying & Termination -

18 Supplying & Testing of 1.1 KV grade Aluminium XLPE power

cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. -

a) 3.5C X70 sqmm Meter 50 736.32 36,816.00

CABLE LAYING -

19 Laying of one number PVC insulated and PVC sheathed/XLPE

power cable of 1.1KV grade of following size direct in ground

including excavation (75 cm),sand cushioning,protective -

covering and refilling the trench etc as required.

a) Above 35 sq. mm and upto 95 sq. Mm Mtr 50 398.84 19,942.00

TERMINATION OF CABLES -

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

20 Supply & Making end Termination with brass compression

gland and Cu/aluminium lugs for PVC insulated and PVC -

sheathed cable of 1.1 kv grade (without cost of Cable)

a) 3.5C X 70 sq. mm (45mm) Each 2 335.12 670.24

E Earthing -

21 Supply & Fixing of Copper plate Earthing (600x600x3mm thick)

including accessories, and providing masnory enclosure with No 2 15,096.92 30,193.84

cover plate having locking arrangement and

22 Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI

marked with G. I. nut bolts & washers including cost of burnt

wood charcoal, salt, foreign soil, water pouring arrangements,

brick masonary enclosure on top with removable RCC cover No 2 7,670.00 15,340.00

complete with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-

charge.The entire earthing system should be Replacement

Warranty will be 2 years

23 Providing and fixing 25 mm X 5 mm dia copper strip on

wall/surface or in recess for connection etc. as required.

24 Providing and fixing 4.0 mm dia cu wire on surface or in recess

for loop earthing as required.

25 Providing and fixing 25mm x 5 mm GI strip on surface or in

recess for connections etc. as required as per direction of Mtr 30 177.00 5,310.00

Engg.-in-Charge.

LIGHTING ARRESTER -

26 Supply of 8 mm Aluminum Round Conductor.Tested as per

IEC 62561. as per direction of engineer in charge.

27 Supply of Roof conductor holder for parapet- Polyamide

Conductor holder:With M8 female thread or diameter 7mm, M8

Screw to connect the conductor holder.Weather and

temperature resistant from -35 to +90 degree Celsius tested.

Conductor holder @ 1 meter distance.Tested as per IEC

62561. as per direction of engineer in charge.

28 Supply of Polyamide roof cable holder for flat roof: DIN 48829

Form B1. Closed form with bottom. Filling weight 1Kg (frost-

resistant concrete). Sleeve from polyethylene, black @ 1 meter

distance. Tested as per IEC 62561.

29 Supply of Connector: For T cross and parallel connectors.

Quick installation using hexagonal bolt M10X30 high-grade hot

dip galvanised. Tested as per IEC 62561.(2nos/expansion

piece ).

30 Supply of Vertical air terminal with accessories:Providing of Air

terminals as per IS-IEC -62305 part-3 Nominal size Ø 10/16

mm aluminium rod: 1 Mtr Airterminal: semi-hard (E-AlMgSiO5 No 16 1,950.54 31,208.64

corresponds to DIN 48801) Suitable for high wind load. Tested

as per IEC 62561.

31 Supply for Providing of Stand for Fang Fix system 16 kg with

base and clamp ,made up of frost resistant concrete and No 16 2,902.80 46,444.80

clamp tested upto 100KA lightning current .

32 Supply of Test Joint (Folding Clamp) suitable to connect 8mm

round conductor and max by 30x3 mm GI strip as specified in

drawing and directed by Engineer. Tested for 100kA lightning

current.

33 Supply of IP 66 Poly Propylene Junction Box. Installation at

1Mtr Height For Test Joint .Internal dimensions: 100x100x48 No 8 326.86 2,614.88

34 Supply of Galvanised Steel Flat 30X3 mm thickness from earth

electrode directly in ground as required. Flat conductor Hot

Dipped Galvanized. Tested as per IEC 62561.

35 Supply for Providing of Cross connector for Flat: Suitable for

30mm Galvanised steel strip. Installed with 4 nos of hexagonal No 16 297.36 4,757.76

plate. Tested for 100kA lightning current.

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

36 Supply of flat conductor holder- Fit: FL 30, With mounting hole

6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece

from hot-dip galvanised steel, Bottom section from polyamide,

black. Tested as per IEC 62561.

37 Supply for Providing of Plastic Corrosion Protection strip:

Approx 1.1 mm thick. Width 50mm. Made of petrolatum- Mtr 80 1,037.22 82,977.60

coated chemical fibre fabric.

38 Supply of UL Listed maintenance free ,Low carbon copper

coated earth rod of 3 metre electrode having diameter of 17.2

mm with copper coating thickness of 250micron tested as per

39 Supply of universal clamp made of SS to connect rod with flat

conductor.

40 Supply of Earth conductivity enhancing mineral compound

shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested. No 8 3,348.84 26,790.72

41 Supply of The above arrangements shall be provided with

Heavy duty earth champer of 5000kg load bearing capacity to No 8 2,559.42 20,475.36

ensure the safety of earthing system.

42 Installation of The above arrangements including all

accessories as per Direction of Engg. In charge.

FIRE EXTINGUISHER : -

Note : [1] All Fire Extinguisher shall be HCFC, CFC and

Halons free. [2] The Fire Extinguisher Manufacturer/Supplier

shall provide declaration, Technical Data Sheet/cutsheet of All

type of Fire extinguisher to be installed.

1 Providing and fixing Carbon-di-oxide fire extinguishers

consisting of welded M.S cylindrical body,squeeze lever

discharge valve fitted with internal discharge tube, ISI marked

high pressure discharge hose, discharge nozzle, suspension

bracket, confirming to IS : 15683 finished externally with red -

enamel paint and fixed to wall with brackets with rawl

plug/dash fasteners complete with internal charge with CO2

gas conforming to IS : 307-1996.(Make-Safefire/ Ceasefire/

Minimax/ Kanex etc)

a) Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006) Each 4 7,091.80 28,367.20

2 Providing and fixing ABC stored pressure dry chemical powder

(mono ammonium phosphate) Fire Extinguisher IS : 15683

latest revision manufacturer and of CRCA sheet in welded

construction, finish with High quality epoxy polyster powder

coated complete with brass forged ball valve, gun metal cap -

and nozzle, including initial filled and wall suspension bracket

(suitable for fighting in class 'A', B & 'C' that is wood, textile,

flammable liquid, electric and gases).(Make-Safefire/

Ceasefire/ Minimax/ Kanex etc)

a) Each 18 3,050.30 54,905.40

Capacity 6 Kg (IS : 15683 : 2006)

DATA TELEPHONE WORKS 0

Subhead- 1 (Lan System) -

Supply & Laying of Cat6 23Awg UTP Cable, through existing

conduit, Make: Legrand/ Systimax/ Panduit

Supply & fixing of RJ-45Jack of Category 6 with Single-port

2 British-style Face plate 86x86 mm with Curveture and wall Nos 0 645.46 -

mount box Make: Legrand/ Systimax/ Panduit

Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make:

Legrand/ Systimax/ Panduit

Supply & Installation of Cat6 Factory crimpped moulded patch

cord,1mtr, Make: Legrand/ Systimax/ Panduit

Supply & Installation of Cat6 Factory crimpped moulded patch

cord, 2mtr. Make: Legrand/ Systimax/ Panduit

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

Supply,Installation,Testing & Commissioning of L-2 Managed

Switch with minimum 24 X 10/100 Base-T ports and

additional 4 nos. SFP upl ink ports , Switch should have mia 56

Gbps Switching Fabric and I6K MAC Address, Support 1Pv6

6 Management , support LEEE 802.17/equivalent for sub 50ms Nos 4 36,226.00 1,44,904.00

ring protection, lGMP and MLD snooping, Operating

temperature 0 to 50 degree C, Shou ld support CLl, GUl, USB

or equivalent interface for talcing backu p, UDLD and single LP

management of min 24 switches. Make:

Cisco/HP/Netgear/Digisol

Supply & fixing of 24U 600/ 650D UL Listed Floor mount Rack

loaded with one no 10Skt 5/15A power distribution unit, 4nos

cable manager, Four nos 90CFM FANs, 1no HD Self and one

pkt H/W screw. Make : Netrack/ Valrack/ Rittal/ APW

Supplying and fixing of following sizes of medium class PVC

FRLS conduit ISI marked along with accessories in

8 surface/recess including cutting the wall and making good the -

same in case of recessed conduit as required as per direction

of Engg.-in-Charge. Make- AKG/ BEC/ Precision/ Norpak

a. 20 MM Mtr 800 94.40 75,520.00

b. 25 MM Mtr 1200 100.30 1,20,360.00

Subhead- 2 (EPBX System) -

Supplying and fixing of Hybrid EPABX system equipped with

128 Analog extensions and 6 Analog Trunk, including required

hardware and software etc as reqd. Make-Matrix/ Siemens/

Supply & Installation of RJ-11 Information Outlet Set for

analoge Telephone connection.

Supplying desktop telephone sets with colour ID as reqd

Make-Panasonic/Beetel

12 S/f of 50 pair MDF box with 3 nos. krone module. Nos 1.00 4,130.00 4,130.00

Supplying and drawing following pair 0.5 sq mm FR PVC

13 insulated annealed copper conductor, unarmored telephone -

cable in the surface/ recessed steel/ PVC conduit as required.

a. 2 Pair Mtr 700.0 41.30 28,910.00

b. 20 Pair Mtr 20.00 241.90 4,838.00

Supplying and fixing of following sizes of medium class PVC

FRLS conduit ISI marked along with accessories in

14 surface/recess including cutting the wall and making good the -

same in case of recessed conduit as required as per direction

of Engg.-in-Charge. Make-AKG/BEC/Precision/Norpak

a. 20 MM Mtr 500 94.40 47,200.00

Subhead- 3 (Smart Class Room) 0

Audio Video For Lecture Theater-2nos 0

SITC of Two way Passive wall mount loudspeaker with LF: 3"

or better, HF : 1" or better having Frequency Response (+/-3

dB) : 90Hz - 18 kHz or better, RMS power : 20 W at 100V & 30

W at 8 Ohms or better, Power Taps : 20 W/ 10 W/ 5 W,

1 Maximum SPL: 100 dB or better, Sensitivity: 85 dB or better, 16 Nos 15,104.00 2,41,664.00

Dispersion : 100 degree X 100 degree or better, Transformer

Taps : 100 V/ 70V with OEM mounting arrangement having

vertical and horizontal rotation to aim the speaker in any

direction. CE Certification or more. Make: Audac/ Bose/ Pulz

SITC of mixer amplifier with 240W RMS power, 100V, 2

unbalanced stereo line inputs 6 x Microphone input, 5-zone

Make: Audac/ Bose/ Pulz

SITC of 98 Inches Interactive Display : Diagonal size 98

Inches or higher ,Panel Technology Backlit D-LED (IPS

Panel) ,with 4K resolution (3840x2160). Includes and

Brightness 450 Nits or better: Viewing Angle 178 / 178 or

better ,Infrared Touch Technology .RAM 8Gb or better and

Storage 128GB , CPU : Octa-core or better , Inbuilt Speakers

20W x2 or better , , Operating System Android™ v14.0 or

better , Connectivity with HDMI,VGA, USB , Wi-Fi, Bluetooth

and Standard Intel 80pin OPS (Option) with 3 years warranty.

Make: Delta/ Panasonic/ Cisco

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

Supply, Installation, Testing & Commissioning of Digital

Wireless Lavlier Microphone with UHF transmission greatly

enhances range, reliability, and scalability, 56 MHz of

bandwidth will allow up to 90 channels, 2200 or more

dynamic range, Mobile App for setup and operation, Lithium-

Ion battery pack delivers up to 12 hours of operation (up to 8

hours of operation with 2x AA batteries). Pre-polarized

condenser transducer with omnidirectional polar pick-up

pattern. Maximum SPL 130dB. Sensitivity of 2.1 mV/Pa. Audio

Frequency Respone 20 Hz- 20 kHz (-3dB). 5-Year Warranty.

Make: Sennheiser/ Shure/ Beyerdynamic

Supply and laying of High-conductivity copper speaker Cable,

5 2.5 SQ mm stranded tinned copper conductor, PVC insulation, 300 Mtr 138.06 41,418.00

twisted Pair, PVC jacket. Make: Krystals/ LibertyAV/ Belden

Supply and laying of Microphone cable, 20AWG 2 core PVC

6 insulated Cu conduction sheilded microphone cable. Make: 50 Mtr 121.54 6,077.00

Krystals/ LibertyAV/ Belden

7 SITC of PVC pipe. Make: AKG 100 Mtr 67.26 6,726.00

Supply, Installation, testing & commissioning of Conncetors:

8 XLR, TRS Stereo, RJ45, RCA, Mono. Make: Neutrik/ MX/ 2 Lot 8,850.00 17,700.00

Digisol

Audio Video For Class Room-5nos -

SITC of Two way Passive wall mount loudspeaker with LF: 3"

or better, HF : 1" or better having Frequency Response (+/-3

dB) : 90Hz - 18 kHz or better, RMS power : 20 W at 100V & 30

W at 8 Ohms or better, Power Taps : 20 W/ 10 W/ 5 W,

1 Maximum SPL: 100 dB or better, Sensitivity: 85 dB or better, 30 Nos 15,104.00 4,53,120.00

Dispersion : 100 degree X 100 degree or better, Transformer

Taps : 100 V/ 70V with OEM mounting arrangement having

vertical and horizontal rotation to aim the speaker in any

direction. CE Certification or more. Make: Audac/ Bose/ Pulz

SITC of mixer amplifier with 120W RMS power, 100V, 2

unbalanced stereo line inputs 6 x Microphone input, 5-zone

Make: Audac/ Bose/ Pulz

SITC of Interactive Display with Panel Size - 86", Type

Technology - Backlit D- LED (IPS Panel), Brightness - 400

cd/m², Typical Contrast Ratio - 1200:1 , Dynamic Contyrast

Ratio - 30000:1, Native Resolution - 4K Ultra-HD (3840 x

2160) , Viewing Angle (H/V) - 178ᴼ/178ᴼ, Aspect Ratio - 16:9,

Refresh Rate (Hz) - 60 Hz, Estimated Life Time - 50,000 Hours

(Typical), Display Color (BIT) - 1.07 Billion (10-bit), Installation

Orientation - Landscape, Response Time - 8 ms, Anti-Glare -

Anti Glare Coating, Bonding - Zero Optical Bonding,

Technology - Infrared Touch, Annotation - Supported, Touch -

20 Points, Passive Pen - ±1mm, Touch - ±1mm, Touch

Resolution - 32,768 x 32,768, Surface Protection - Thick

Toughened Glass (Level 7H on Mohs scale of Mineral

Hardness), Touch Tools - Finger, Stylus, Glove, Opaque

Objects, Simultaneous Writing, Pen, Touch, Palm Erase - Yes,

Writing Stylus/Pen Location - Magnetic Mounting on IFPD

Panel Front, System Version - Androidᵀᴹv13.0, Browser -

Yes, Office - Yes, CPU Quad-core, Internal Storage - 32 GB,

RAM - 4GB, Inputs Side Panel - 1 x Mini AV(3.5 mm mini jack,

2 x HDMI 2.0(60 Hz/4K), HDMIv2.0 (ARC) x1, Inputs Front

Panel - 1 x HDMI 2.0(60 Hz/4K), Outputs Side Panel - 1 x

HDMI-Out, 1 x SPDIF-Out, 1 x Earphone Out (Stereo Audio),

USB Side Panel - 1 x USB-B(Touch), 1 x USB-A 2.0, 2 X USB-

A 3.0 , USB Front Panel - 2 x USB-A 3.0, 1 x USB-B3.0, 1 x

USB-C, Ethernet Side Panel - 1 x RJ45 Input, 1 x RJ45

Output, Control Side Panel - 1 x RS232C Control Signal

Interface, Antenna WiFi + Bluetooth - 3 + 1 (Wifi 6,

802.11a/b/g/n/ac 2.4 GHz / 5GHz 2T/2R, Bluetooth 5.2),

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl.No. Description of work Qnty. Unit Rate Amount

IR Receiver - Yes, Air Play Discovery by Bluetooth - Yes,

Mirror/Screenshare - Yes, Lock + Teminate Session - Yes,

File/URL Sharing - Yes, BYOD - Yes, Collaboration - Screen

Mirroring, Digital Whiteboard, Office, Teaching Tools, Screen

Recording, Windows OPS - Intel Standard 80 Pin OPS-

Optional, Speakers - 18W x 2 (Stereo), OTA Firmware

upgradation - Yes, Screen Lock - Yes, Pin Code Protection -

Yes, Power Supply (Internal) - AC 100-240V, 50/60Hz,

Consumption ≤450W , Standby Mode <0.5W (Standby), Auto 5 Nos 4,48,400.00 22,42,000.00

power On/Off Setting - Yes , Dimension (L x H x D)mm - 1953

x 1172.3 x90.2 , Net Weight 76 ± 2 Kg , Gross Weight 85 ± 2

Kg , VESA Mounting (4 – M8 × 25mm) 800 x 400 mm,

Standard AC Power Cord (1.5m), Stylus (x2), Remote Control

(W/o Batteries), HDMI Cable (3M), Touch Cable(3M), Storage

Temperature -20ᴼ-60ᴼC, Working Temperature 0ᴼ-45ᴼc ,

Storage Humidity 10%-90% RH , Warranty Standard 3-Years.

Make: Delta/ Panasonic/ Cisco

Supply, Installation, Testing & Commissioning of Digital

Wireless Lavlier Microphone with UHF transmission greatly

enhances range, reliability, and scalability, 56 MHz of

bandwidth will allow up to 90 channels, 2200 or more

dynamic range, Mobile App for setup and operation, Lithium-

Ion battery pack delivers up to 12 hours of operation (up to 8

hours of operation with 2x AA batteries). Pre-polarized

condenser transducer with omnidirectional polar pick-up

pattern. Maximum SPL 130dB. Sensitivity of 2.1 mV/Pa. Audio

Frequency Respone 20 Hz- 20 kHz (-3dB). 5-Year Warranty.

Make: Sennheiser/ Shure/ Beyerdynamic

Supply and laying of High-conductivity copper speaker Cable,

5 2.5 SQ mm stranded tinned copper conductor, PVC insulation, 500 Mtr 138.06 69,030.00

twisted Pair, PVC jacket. Make: Krystals/ LibertyAV/ Belden

Supply and laying of Microphone cable, 20AWG 2 core PVC

6 insulated Cu conduction sheilded microphone cable. Make: 125 Mtr 121.54 15,192.50

Krystals/ LibertyAV/ Belden

7 SITC of PVC pipe. Make: AKG 250 Mtr 67.26 16,815.00

Supply, Installation, testing & commissioning of Conncetors:

8 XLR, TRS Stereo, RJ45, RCA, Mono. Make: Neutrik/ MX/ 5 Lot 8,850.00 44,250.00

Digisol

Sub Total Amount 1,20,20,079.44

Sub Total Amount 1,20,20,079.44

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Arts. Collage

Sl No Description Unit Qty Rate Amount

1 A-Internal Sanitary & Plumbing System

Supplying all materials , labour, T&P and providing and fixing to wall or

ceiling and floor PVC pipes conforming to C-PVC1785/89 ( Sch-80 ) and G.I

pipe fittings of the following nominal bore with clamps including making good

the wall,ceiling and floor ,testing all complete as per P.H. specification and

direction of Engineer-in-charge .

In Ground Floor-

(a) 20mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 65 338.12 21978.00

(b) 25mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 70 377.03 26391.94

(c) 32mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 50 661.63 33081.30

(d) 40mm dia C-PVC Pipe (Ashirbad/ Supreme/ Astral/ Finolax) Mtr 25 893.81 22345.37

2 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste

ventilating pipes and fittings of the following outside diameter conforming to ISI No.

13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches

including jointing with supply of approved rubber lubricant by non-heat application

method/as per manufacturer ’ s specification, testing, earthwork in excavation in all

kinds of soil and refilling of trenches as per specification and direction of the Engineer

in charge. (Supreme, Astral, Ashirbad) .

(a) 75mm SWR pipes Mtr 100 399.19 39919.40

(b) 75mm PVC plain bend Each 30 217.12 6513.60

(c) 75mm PVC socket plain Each 30 95.93 2878.02

(d) 110mm SWR pipes Mtr 120 581.62 69794.64

(e) 110mm PVC 'P' trap Each 35 586.81 20538.49

(f) 110mm PVC socket plain Each 40 188.92 7556.72

(g) 110mm PVC plain bend Each 30 273.76 8212.80

(h) 110mm PVC door bend Each 10 346.45 3464.48

(i) 110mm PVC door Tee Each 8 455.48 3643.84

(j) 110mm PVC plain Tee Each 30 380.79 11423.58

(k) 110mm PVC door cross Tee Each 6 650.42 3902.50

(l) 110mm dia U-PVC Offset without ear Each 6 480.73 2884.39

(m) 110mm PVC vent cowl Each 15 68.68 1030.14

(n) 110mm PVC Clamp Each 30 50.50 1515.12

3 Supply,Providing, fixing, testing and commissioning in position UV stabilised

75 mm dia UPVC Rain water pipe with Fittings (IS: 13592 Type - B). In case Mtr 70 419.16 29341.17

of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per

engineer in charge.110 mm diameter. (IS:13592, Type -B).

4 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water

pipes 110 mm dia.

5 Supplying all materials , labour, T&P and fixing Vitreous china water closet

,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly

embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal

size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest,

fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including Each 4 3042.87 12171.46

jointing the trap with pan in cement mortar (1:1), cutting the floor and mending

good the damages etc. all complete as per P.H. specification and direction of

Engineer-in-charge .

580mmx440mm size Orissa Pan (White) (Parryware/ Hindware/ Somay/

6 Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina

washed down water Closet (European type water closet - EWC) with integral

"P" or "S" type trap to the floor including wodden plug and chromoum plated

screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat

cover for washed down water closet with crmium plated brass hinges and Each 19 3289.84 62506.96

rubber buffers including polishing etc all complete as per specification and

direction of Engineer-in-charge.

European Water Clost "S" or "P" trap (Parryware/ Hindware/ Somany/

7 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern

complete with fittings & seat cover, one no hinged rail 76 cm and five nos of Each 2 78575.49 157150.98

grab rails 60 cm) (Hindware).

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

8 Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity

low level flushing cistern with a pair of cast iron or M.S brackets complete

with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball

valve with polythene float CP brass handle, unions and couplings for

connection with inlet, outlet and overflow pipes,32mm dia CP flush Each 23 1851.77 42590.80

bend,15mm dia pvc inlet connection pipe including cutting holes and making

good the same and connecting the flush bend with cistern and closet and

connecting the inlet pipe with supply main etc all complete as per specification

and direction of the Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white)

9 32mm dia flush bend for L/L cistern Each 23 81.77 1880.80

10 Supplying all materials,labour,T&P and Bowl pattern urinal of the following

sizes including connecting the urinal with 32mm dia PVC waste pipe 910mm

long by means of white lead mixed with chopped hemp, fixing 32mm dia cp

dome west,15mm dia cp spreader including cutting holes in wall and making

good the damages with supply of wooden plugs,screws and cement etc. all

complete as per specification and direction of the Engineer-in-charge.

(a) Halfstall urinal(Parryware). Each 14 2678.60 37500.40

(b) 32mm dia CP dome waste Each 14 159.22 2229.04

(c) Pressmatic Stopcock Each 14 2099.22 29389.08

11 Supplying all materials ,labour ,T&P and fixing Wash basin with hole for

pillar taps with cast iron or MS brackets painted white including cutting holes

in walls and making good the damages with supply of wooden plugs, screws

and cement etc. fixing pedestral for wash basin recessed at the back for the

reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal

diameter for wash basin including brass check nut complete, fixing pillar taps

capstan head screw down high pressure lettered 'Hot' and 'Cold' with long

screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC

inlet connection pipe and making connection with pillar cocks and supply

mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per

specification and direction of Engineer-in-charge.

(a) 550mmx400mm size wash hand basin with Porcelain pedestal

(Parryware/Hindware/Somay/Cera)

(b) Under Counter basin (560x450) (Hindware) Each 11 3319.34 36512.74

(c) 32mm dia PVC waste pipe with brass coupling nut Each 15 62.58 938.63

(d) 15mm dia PVC inlet connection pipe 0.45m long Each 15 42.13 631.89

12 Supplying all materials, labour, T&P and fixing wash Kitchen sink/ Laboratory

sink with outlet at end and weir overflow including fitting and fixing a pair of

cast iron or MS brackets painted white, fixing 50mm/40mm dia ss waste, fixing

50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,

screws and cement etc including cutting holes in walls and making good the

damages etc all complete as per specification and direction of the Engineer in

charge.

(a) 600x450x250 mm stainless steel kitchen sink (Jayna make) Each 1 6271.07 6271.07

13 Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of

the following nominal bore with supply of all jointing materials complete as

per specification and direction of the Engineer in charge.

(a) 15mm dia CP 2way bib cock (Euronics RIV-1004R) Each 19 1085.60 20626.40

(b) 15mm dia CP Health faucet with Hose Pipe (Euronics EHF01) Each 19 895.62 17016.78

(c) 15mm dia CP Short Body Bib cock (Euronics RIV-1010R) Each 4 824.82 3299.28

(d) 15mm dia CP Long Body Bib cock (Euronics RIV-1011R) Each 6 919.22 5515.32

(e) 15mm dia CP Angle stop cock with wall Flange (Euronics RIV-1003R) Each 45 1393.82 62721.72

(f) Sink Cock (Wall Mounted) with wall Flange(Euronics RIV-1012R) Each 1 1532.82 1532.82

(g) 15mm dia CP Pillar cock (Euronics RIV-1002R) Each 15 1096.22 16443.30

(h) 15mm dia CP extension piece Each 50 69.97 3498.70

(i) PVC Connection Pipe Each 50 40.12 2006.00

(j) PVC Discharge Pipe Each 30 92.75 2782.44

(k) 15mm dia. C.P flange Each 70 47.55 3328.78

(l) 125mm dia CP gratting Each 40 110.33 4413.20

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

14 Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel

rail / Towel ring complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and Each 10 636.48 6364.80

direction of Engineer-in-charge .

CP Towel Ring

15 Supplying all materials ,labour ,T&P and fixing CP Soap Holder/ Soap

Dispenser complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and Each 11 2713.54 29848.94

direction of Engineer-in-charge .

CP Soap Dispenser

16 Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook

alongwith all necessary accessories complete including cutting, making good

the walls, floors, slab wherever complete in all respect as per specification and Each 23 342.20 7870.60

direction of the Engineer in charge.

Stainless Steel Coat Hook - Double (Euronics EC02)

17 Supplying all materials ,labour ,T&P and fixing Mirror of superior glass

mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden

plugs with chromium plated brass screws and washers etc.all complete as per Each 15 939.16 14087.43

specification and direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm

18 Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings

of the following nominal bore with supply of all jointing materials complete as Each 6 1168.51 7011.04

per specification and direction of the Engineer in charge.

25mm dia Brass F.W valve (Sakti make)

19 32mm dia Brass F.W valve (Sakti make) Each 4 1711.44 6845.75

20 40mm dia Brass F.W valve (Sakti make) Each 4 2165.41 8661.62

21 40mm dia CPVC Ball valve Each 6 1116.34 6698.03

22 Supplying all materials, labour, T&P and providing fitting and fixing Aquaguard Each 2.00 182223.86 364447.72

23 Supplying all materials,labour,T&P and fixing Rotational moulded

polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-

-1996 including cutting holes through the tank and fixing mild steel tubes and

fittings and providing extra sockets and jam nuts, fixing ball valve etc,

including hoisting upto a height of 5 metres above ground level and placing the

tank to the required position and providing 1st class K.B brickwork in cement

mortar (1:6) of 0.46m height in staging and in circular protection wall to Each 2.00 56731.21 113462.43

support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab

of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and

2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips

including centering and shuttering, watering, curing, conveyance of all

materials to worksite etc all complete as per specification and direction of the

Engineer in charge.

Fixing 3000Ltr Roto-moulded water storage tanks-In Terrace floor

24 B- External Supply & Drainage portion

Supplying all materials ,labour ,T&P and constructing gully trap chamber of

inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement

concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation

concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around

trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside Each 6.00 2185.60 13113.58

12mm thick cement plastering (1:3) finished with a floating coat of neat

cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm

size CI grating etc.all complete as per drawing, specification and direction of

Engineer-in-charge.

In side size 250mmx250mm

25 Supplying all materials ,labour ,T&P and constructing Inspection Chamber of

inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm

size crusher broken hard black granite metal on bed , KB brick work in cement

mortar (1:6) in foundation and plinth, moulding and shaping the channel inside

and benching with cement concrete (1:2:4) using 12mm size crusher broken

hard black granite chips, 12mm thick cement plaster (1:3) with cement

punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab each 8.00 13148.74 105189.92

(1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C

man hole cover, earth work in excavation in all kinds of soil and refilling the

cavity around the chamber including watering,curing,cost of all materials,

conveyance of all materials to worksite, payment of royalty,all taxes etc.all

complete as per approved drawing, P.H specification and direction of

Engineer-in-charge .

Inside size : 760mmx760mmx460mm

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

26 Supplying all materials, labour, T&P and constructing Circular Type Man Hole

Chamber of the following size with cement concrete (1:4:8) using 40mm size

hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5),

moulding and shaping the channel inside and benching with cement concrete

(1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with

punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover each 2.00 26857.56 53715.11

slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds

of soil and refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty,taxes etc all

complete as per approved specification and direction of the Engineer in charge.

Inside size : 910mmx910mmx910mm

27 Providing and fixing in position Polyproplene Foot steps of required shape and

approved quality as per the direction of E.I.C.

28 Providing Lowering, Laying, Jointing and Testing Work of non-pressure NP 3

class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in Mtr. 90.00 532.42 47917.44

the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints:

A Construction of 30KLD Ltrs.Capacity Domestic UGR.

1 Earth work in excavation of foundation in all kinds of soil within 50m initial

lead and 1.5m initial lift including rough dressing & breaking clods to

maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and

as per direction of the Engineer-in-Charge.

a 6.00 x 4.00 x 1.50 =36.00 cum 36.00 254.76 9171.43

b Initial lift - 6.00 x 4.00 x 0.40 = 9.60 cum 9.60 273.52 2625.83

2 Excavation of foundation in laterite rock or any hard rock (other than granite)

including dressing and leveling the bed and depositing the soil as per cum 9.60 1706.87 16385.95

specification approved by the Department.

3 Supplying all materials, labour, T&P and filling in foundaton and plinth with

sand well watered and rammed including conveyeance of all materials to Cum 3.60 476.25 1714.49

worksite,payment of royalty, taxes etc all complete as per direction of the

Engineer in charge.

4 Supplying all materials, labour, T&P and providing cement concrete (1:3:6)

with 40mm H.G metal including watering, curing and conveyance of all Cum 3.60 6351.94 22866.98

materials to site.

5 Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3)

for RCC work using 12mm HG chips including hoisting,laying,curring and

conveyance of all materials to site etc complete.

a. R.C.C floor , walls and roof slabs Cum 14.93 8899.44 132900.71

6 Supplying all materials, labour, T&P and providing M.S.Reinforcement for

RCC work including cutting, banding, binding, straightening and trying the Qtl. 14.93 10704.49 159856.54

grills and placing in position including cost of binding wire 18 to 20 gage.

7 Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for RCC work including false work and dismantling then after

casting including cost of materials complete in ground floor.

a RCC Walls sqm. 72.48 1171.62 84919.16

b RCC Slab sqm. 15.00 782.58 11738.64

8 Supplying all materials, labour, T&P and providing 6mm thick cement plaster

(1:3) including watering,curring and conveyance of all materials to site.

Inside/outside portion sqm. 105.84 191.04 20219.89

9 Supplying all materials, labour, T&P and providing cement punning including

watering, curring and conveyance of all materials to site.

10 Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI

step iron including supply of necessary C.C(1:2:4) for fixing etc complete as each 8.00 321.55 2572.40

per P.H.D. specification.

B Construction of 6.75mx3.60m x 1.40m(h) Rain water Recharge Pit- 1Nos.

1 Sinking of tube well through D.T.H.Rig.

200mm dia- 0.0m to 30.00m Mtr. 50.00 855.03 42752.00

2 Lowering of PVC casing pipe inside bore.

200mm dia- 0.0m to 30.00m Mtr. 50.00 189.27 9464.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

3 Cost.of 200mm dia (Sch.80)Pipe Mtr. 50.00 1927.88 96395.00

4 Cutting slot in casing pipe for recharge of rain water Mtr. 50.00 417.13 20857.00

5 Labour for packing gravel outside the tube well Cum 31.03 129.92 4032.00

6 Cost of washed gravel. Cum 4.70 1902.63 8943.00

7 Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift

including rough dressing and breaking clods to maximum 5cm to 7cm and Cum 133.38 171.57 22885.00

laying in layers not exceeding 0.3 mtr in depth and as per direction of the

Engineer in charge.

8 Supplying all materials, labour, T&P and providing cement concrete (1:4:8)

with 4cm size hard granite metal including watering, curing, conveyance of all Cum 2.16 4914.46 10638.00

materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

9 Supplying all materials, labour, T&P and providing brick work with Fly ash

bricks having crushing strength not less than 75kg/cm ² with dimensional

tolerance ± 8 percent in cement mortar (1:6) including watering, curing, Cum 22.80 4493.56 102454.00

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in charge.

10 Supplying all materials, labour, T&P and providing 12mm thick cement plaster

(1:4) on brickwork including watering, curing, conveyance of all materials to Sqm 182.40 133.69 24386.00

worksite, payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge.

11 Supplying all materials, labour, T&P and providing cement punning including

watering, curing, conveyance of all materials to worksite, payment of royalty, Sqm 97.20 27.26 2650.00

taxes etc all complete as per specification and direction of the Engineer in

charge.

12 Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for R.C.C works including false work and dismantling them

after casting including conveyance of all materials to worksite, payment of Sqm 6.26 398.13 2493.00

royalty, taxes etc all complete as per specification and direction of the

Engineer in charge.

13 Supplying all materials, labour, T&P and providing reinforced cement concrete

work of M-25 grade with 20mm and down grade black hard granite crusher

broken stone chips including hoisting, laying, watering, curing, conveyance of Cum 0.84 6299.78 5292.00

all materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

14 Supplying all materials, labour, T&P and providing M.S reinforcement for

R.C.C work including cutting, bending, binding, and tying the grills and

placing in position including cost of binding wire 18 to 20 gauge, conveyance Qntl. 0.68 6117.95 4161.00

of all materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

15 Providing and filling filter media

a 40mm size bolder-2x6.0x2.50x0.85=25.50 Cum 25.50 1669.11 42563.00

b 20mm size washed gravel-2x6.0x2.50x0.40=12.00 Cum 12.00 2033.73 24405.00

c Course sand-2x6.0x2.50x0.30=9.00 Cum 9.00 687.35 6187.00

16 Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi Qntl. 6.00 8378.00 50268.00

C Sinking of 200mm x 150mm Large Tube well through DTH method -

1 Labour for drilling a perfectly vertical bore hole of specified dia for a specified

depth below ground level through consolidated and unconsolidated rock with

down the hole hammer drilling rig or combination rig as required to suit the

site condition as per the direction of the Engineer in charge including use of

own rig with its accessories, tools and plant and consumables etc for lowering

of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with

socket and with or without well screen as per the necessity for soft, medium, mtr 60.00 923.47 55408.08

hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent

collapse of overburden is to be provided by the contractor including lowering

and withdrawing after completion of the tube well), 200mm dia to 400mm dia

in overburden portion including packing of gravel supplied by the contractor

for 400mm dia bore only .

Drilling of 200mm dia bore 0 to 30 mtr (2x30mtr)

2 Drilling of 200mm dia bore 31 to 45 mtr (2x15mtr) mtr 30.00 923.47 27704.04

3 Drilling of 150mm dia bore 45 to 100 mtr (2x55mtr) mtr 110.00 923.47 101581.48

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

4 Labour for lowering the following size of PVC casing pipes with or without

slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted

and set up in perfectly vertical position including cutting and threading of

blank pipes and slotted pipes and supplyinging and fixing of all jointing mtr 60.00 212.99 12779.40

materials ,extra sockets and T&P etc. all complete and keeping the top of

casing pipe threaded including plugging the tubewell to prevent entry of

foreign materials.

Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs (2x30mtr)

5 Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs (2x15mtr) mtr 30.00 212.99 6389.70

6 Cost of 200mm dia PVC schedule - 80 pipe (2x46mtr) mtr 92.00 2095.21 192759.14

7 Cleaning and developing the tube well with supply of compressor worked till

clear and adequate discharge is obtained from the tube well including supply each 2.00 7771.48 15542.96

and use of all necessary equipment and labour as per direction of the Engineer

in charge .

8 Supplying all materials, labour, tools and plant and withdrawing casing pipes

from the unsuccessful bore and depositing in the departmental store in good mtr 45.00 419.49 18877.05

condition.

Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe

9 Supplying all materials,labour,T&P and providing around sealing by cement

concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr

below ground level ( as per drawing ) to plug the bore hole excluding cost of

cement all complete as per direction of the Engineer-in-charge . Mimimum one cum 0.40 9391.62 3756.65

meter of casing pipe to nserted in the bore in to the rock the bottom to ensure

sanitary sealing ( excluding cost of cement which willbe supplied by the

Department ) .

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

10 Supplying all materials, labour, T&P and providing fitting & fixing

submerssible pump with squirrel cage induction type submerssible electric

motor to run single-phase line voltage ranging from320 to450 volt confirm to

IS 8034/89 with following specification suitable control pannel jointing with

GI/PVC/HDPE pipe, electrification, testing, commissioning , trial running, each 3.00 19618.21 58854.62

conveyance of all material to work site, payment of all taxces etc all complete

as per PH specification and direction of Engineer-in-charge.

2H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110

L.P.M with outlet dia of 32mm

11 DOL contol pannel each 3.00 4490.49 13471.47

12 2.50 sqmm flate cable mtr 250.00 151.16 37789.50

13 40mm dia steel short piece each 6.00 238.36 1430.16

14 Steel rope with cover mtr 100.00 31.51 3150.60

15 Well cap each 2.00 179.71 359.43

16 50mm size CI bracket each 6.00 107.73 646.40

17 20mm dia rigid U-PVC pipe mtr 160.00 8.14 1302.72

18 Supplying all materials, labour, T & P and providing & electrification to

submerssible pump sets ane service connection including fitting fixing of each 2.00 1770.00 3540.00

electric board & Switch etc all complete as per direction of Engineer-in-

charge.

Supplying all materials , labour, T&P and providing and fixing to wall or

ceiling and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 ) and

G.I pipe fittings of the following nominal bore with clamps including making

good the wall,ceiling and floor ,testing all complete as per P.H. specification mtr 100.00 575.72 57572.20

and direction of Engineer-in-charge .

In ground floor

19 40mm dia UPVC ASTM-D Pipes

20 Supplying all materials, labour, T&P and constructing Bore well protection

chamber of the inside size 650x650x1000hight with cement concrete (1:3:6)

using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork

in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g

chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in

(1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of each 2.00 15731.64 31463.28

soil and refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per approved specification and direction of the Engineer in charge.

Bore well chamber

D Construction of 30KLD RCC Septic tank & Soakway Pit

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

21 Earth work in excavation of foundation in all kinds of soil within 50m initial

lead and 1.5m initial lift including rough dressing & breaking clods to

maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as cum 59.4 344.206 20445.84

per direction of the Engineer-in-Charge.

22 - do - with addl. Depth of 1.5 m

23 Supplying all materials,labour ,T&P and filling in foundation and plinth with

sand well watered and rammed including cost, conveyance of all materials to

work site ,payment of royalty,taxes etc. all complete as per direction of the cum 5.94 1194.986 7098.22

Engineer-in -charge.

In ground floor- 1x9.90mx4x0.15m=

24 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 )

with 4cm size crusher broken hard granite metal including watering, curing,

cost of all materials,conveyance of all materials to work site with payment of cum 5.94 7051.798 41887.68

royalty, all taxes etc all complete as per P.W.D specification and direction of

Engineer-in-charge.

In ground floor- 1x9.90mx4x0.15m=

25 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 )

with 12mm size crusher broken hard black granite chips including watering,

curing,cost of all materials, conveyance of all materials to work site with cum 3.47 9391.62 32598.31

payment of royalty, all taxes etc all complete as per P.W.D specification and

direction of Engineer-in-charge.

In ground floor- 1x8.90mx3x0.13m=

26 Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3)

with 12mm size hard broken granite chips for R.C.C works including hoisting,

laying, watering, curing, conveyance of all materials to worksite, payment of cum 27.87 10255.498 285820.73

royalty, taxes etc all complete as per specification and direction of the

Engineer in charge.

Base- 1x9.50mx3.60mx0.20m=

27 Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for R.C.C works including false work and dismantling them

after casting including conveyance of all materials to worksite, payment of

royalty, taxes etc all complete as per specification and direction of the

Engineer in charge.

A. For Roof slab sqm 37.15 889.248 33035.56

B. For RCC wall sqm 128.4 1399.716 179723.53

28 Supplying all materials, labour, T&P and providing M.S reinforcement for

R.C.C work including cutting, bending, binding, and tying the grills and

placing in position including cost of binding wire 18 to 20 gauge, conveyance Qntl 22.3 10351.786 230844.83

of all materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

In ground floor

29 Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement

punning on brick work including watering,curing,cost of all materials,

conveyance of all materials to worksite,payment of royalty,all taxes etc.all sqm 83.82 297.95 24974.17

complete as per PWD specification and direction of the Engineer-in-charge.

30 Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x

100mm x 100mm SW Tee in wall including filling the recess with cement

concrete (1:3:6) with 12mm size h.g chips all complete including watering, Each 2 542.092 1084.18

curing, conveyance of all materials to worksite, payment of royalty all

complete as per specification and direction of the Engineer in charge

31 Supplying all materials, labour, T&P and making MS step iron in 20mm

diameter MS steel bars and fixing into walls of man hole/septic tank duly Each 10 335.592 3355.92

embedded in cement concrete (1:3:6) complete as per specification and

direction of the Engineer in charge.

32 Filling in foundation and plinth with excavated materials, moorum including

watering and ramming as directed by the Engineer in charge. cum 10 191.278 1912.78

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

33 Supplying all materials, labour, T&P and constructing soakway pit of the

following size with dry brick walling from bottom upto invert of inlet pipe and

fly ash brickwork in cement mortar (1:6) for the remaining height at top,

cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement

plaster (1:4) inside and outside over masonry brickwork, gravel backing in the

rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm Each 1.00 30259.45 30259.45

size hg chips fitted with iron lifting handles including earthwork in open well

excavation in all kinds of soil and refilling of cavity around the pit & painting

the iron works, watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per approved specification and

direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit .

Total: 4155625.64

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

(GIRL'S HOSTEL)

Item of Work Unit Quantity Rate Amount

1 Site Clearance

Cleaning & grubbing road land including uprooting rankvegetation, grass ,bushes,

shurbes, sapling and trees girth upto 300mm, removal of stumps of trees cut earier

and disposal of unsevicable materials and stacking of servicable materials to be used sqm 1086.69 9.74 10578.93

or auctioned up to lead of 1000 meters including removal and disposal of top organic

soil not exceeding 150mm thickness.

2 Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead and 1.5m lift

a) including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying Cum 356.37 319.66 113918.65

in layers not exceeding 0.3m in depth and as per specification complete.

Up to (1.5m to 2m depth) Cum 110.92 350.11 38833.76

3 Sand Filling

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper

gradient including cost of all materials, conveyance, all taxes and royalties, loading Cum 714.10 1484.24 1059901.85

and unloading, including cost of all labour, sundries, T & P etc. All complete as per

directions of the Engineer -in-charge.

4 Back Filling

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited

layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cum 233.65 177.59 41493.21

cost of all labour, sundries T & P etc complete in all respect as per the direction of

Engineer-In-Charge.

Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean

hard black crusher broken granite stone metal of approved quality and from approved

quarry including hoisting, lowering and laying concrete in layers not exceeding 15

cm. (6") thick to the required level ramming, watering, curing etc. complete including Cum 126.01 8246.69 1039181.18

cost, conveyance, royalties of all materials with all labour and T&P required for the

work etc. complete in all respect and as per the direction of the Engineer-in-charge.

6 Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment Confirming to IS

6313 (Part-II) and creating chemical barrier under and around the column pits, wall

trenches, basement excavation top surface of plinth filling, junction of wall and floors

along with external perimeters of building, expansion joints, surrounding the pipes

and conducts etc. at the rate at 7 ,5 liter per sqm on vertical surface and 5.0 liter per

sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per sqm 779.52 94.40 73586.69

lit of water cost of all materials, labour,conveyance, T&P , all taxes and hire charges

of machinaries as per direction of Engineer-incharge. (Make :- HI-Solution or Smart

Care Pest Control or Bharat Pest Eradicators)

7 Fly Ash brick(1:6)

Fly Ash brick masonry in cement mortar (1:6) in Substructure using Fly Ash bricks of

25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less than 75 kg./sqcm

with dimensional tolerance ± 2% including splays cutting circular moulding

chamfering and corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all materials with

all labour,labour cess and T & P required for the work complete in all respect as per

direction of Engineer-in-Charge.

Foundation cum 110.25 7,683.05 847041.77

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as

per approved designs and drawings having a minimum compressive strength (in work

test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted

in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp sand for mortar of approved

quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds

25 %) to be mixed in concrete mixture with Portland slag cement (PSC) including

hoisting, lowering, laying and compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after dismantling and removing

debris from the work site and finishing the exposed

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

surface smooth providing grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc.complete in all respect as directed

by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening, cutting, bending etc. of

M.S. rods or tor steel tying the grills and placing in proper position.

Foundation and plinth

Footing Cum 144.20 11842.86 1707692.69

Column (Below Plinth) Cum 10.65 22631.56 240958.24

Plinth beam Cum 39.05 12865.07 502408.24

Ground Floor

Column Cum 29.16 22631.56 659936.35

Staircase Cum 8.38 22484.71 188433.12

Lintel Cum 11.64 20826.28 242460.86

Chhaja Sqm 38.87 1721.30 66900.10

Roof Beam Cum 32.54 22631.56 736508.83

Roof Slab Cum 103.24 20313.76 2097271.19

First Floor

Column Cum 27.77 25018.14 694816.18

Staircase Cum 8.38 24841.86 208187.17

Lintel Cum 12.41 22851.73 283589.93

Chhaja Sqm 41.05 1926.47 79081.51

Roof Beam Cum 34.47 25018.14 862321.66

Roof Slab Cum 85.87 22236.73 1909528.18

Second Floor

Column Cum 27.77 27874.93 774156.43

Staircase Cum 8.38 27663.33 231832.54

Lintel Cum 12.41 25275.15 313664.63

Chhaja Sqm 41.05 2172.23 89169.90

Roof Beam Cum 34.47 27874.93 960789.17

Roof Slab Cum 85.87 24537.23 2107077.67

Terrace Floor

Column Cum 9.45 31294.93 295599.42

Chhaja Sqm 4.74 2466.59 11691.63

Lintel Cum 1.31 28175.27 36768.73

Roof Beam Cum 3.92 19412.01 75998.04

Roof Slab Cum 4.91 27289.73 133984.05

9 Reinforcement

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary

steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL

(grade Fe-500D) etc. including bending, binding, welding and jointing if necessary

and tying the grills and placing in position as required for R.C.C. Work and for

providing fan hooks as required, hoisting, lowering, laying including cost,

conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and

labour required for the work for bending, binding and tying the grills in all floors with

labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or

tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Foundation and plinth qtl 225.85 10443.07 2358567.54

Ground Floor qtl 250.93 10443.07 2620457.89

First Floor qtl 231.46 10481.74 2426149.61

Second Floor qtl 231.46 10522.34 2435547.94

Terrace Floor qtl 30.57 10564.98 322971.33

10 FLY ASH BRICK(1:6)

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks

of 23 Cm. x 11 Cm. x 8 Cm size having a crushing strength of not less than 75

kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding

chamfering and corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water at least for six

hours before use including cost, conveyance, royalties and taxes of all materials with

all labour,labour cess and T & P required for the work complete in all respect as per

direction of Engineer-in-Charge.

Ground Floor cum 151.85 7728.29 1173502.50

First Floor cum 166.47 8165.81 1359342.38

Second Floor cum 166.66 8668.96 1444791.28

Terrace Floor cum 65.04 9247.60 601463.97

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

11 FLY ASH BRICK(1:4)

Providing Fly ash bricks masonry work using 23 Cm. x 11 Cm. x 8 Cm having

crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the

bricks in water before use in all necessary projection splays cutting, circular

moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading

and unloading of all materials & cost of all labour, scaffolding ,watering & curing

,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

Ground Floor cum 13.02 8288.36 107951.37

First Floor cum 14.13 8725.88 123329.35

Second Floor cum 14.13 9229.03 130440.77

12 16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened

and washed sharp sand for mortar and finished smooth to the rough surface of walls

in all heights after racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost, conveyance, royalties of

all materials with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 346.76 373.36 129465.76

First Floor sqm 359.90 386.85 139225.81

Second Floor sqm 429.86 401.00 172371.60

Terrace Floor sqm 476.37 415.86 198101.13

13 12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened

and washed sharp sand for mortar and finished smooth to the rough surface of walls

in all heights after racking out joints including watering and curing, rounding of

corners, providing grooves where ever necessary with cost, conveyance, royalties of

all materials with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 1406.05 266.55 374781.58

First Floor sqm 1418.77 271.98 385873.15

Second Floor sqm 1337.23 277.54 371128.08

Terrace Floor sqm 85.38 283.27 24186.72

14 6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened

and washed sharp sand for mortar and finished smooth to R.C.C. work after closed

deep chipping & slurry treatment including watering and curing, rounding of corners,

providing grooves where ever necessary with cost, conveyance, royalties of all

materials with cost of all labour, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Ground Floor sqm 943.24 287.34 271032.28

First Floor sqm 851.00 293.68 249919.58

Second Floor sqm 851.00 300.20 255472.68

Terrace Floor sqm 39.28 306.94 12055.90

15 Water Proofing

Waterproofing application:- Providing and application of two component polymer

modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm

The membrane should have Elongation equal or more than: 30% , Crack Bridging

ability : Up to 1 mm, Adhesive strength: 1.0 N/mm² @ 28d, Tensile elongation: 60%

@ 20°C, Shore A Hardness >85 (between 3 - 7 days) etc. as per direction of E.I.C

(For longer span, in terrace panel of 4m*4m should be done by groove cutting, and

filling with PU Sealant)(Make:MYK / Fosroc/Pidilite)

First Floor sqm 163.32 548.23 89536.60

Terrace sqm 572.43 548.23 313820.78

16 Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2)

using 6mm size black hard granite crusher broken chips and screened & washed sharp

sand for mortar and finished smooth to the rough surface of slab including watering

and curing with cost, conveyance, royalties of all materials with cost of all labour,

labour cess and T&P required for the work etc. complete in all respect as directed by

the Engineer in charge.

First Floor sqm 163.32 616.99 100766.25

Terrace sqm 650.98 730.29 475406.14

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supplying, fitting & fixing of Industrial vitrified tiles (40x40)cm in floors of

approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand)

and filling joints with slurry including cost of all materials, labour T&P etc required

for the work all complete as per direction of the Engineer-in-charge

Ground Floor sqm 18.00 1748.43 31471.73

18 Vitrified Floor Tiles

Providing full body matt finish vitrified tile flooring using vitrified tiles having

thickness of min 10mm conforming to IS 13755 of 1200x600 (shade to be decided as

per Ama Hospital scheme) (homogeneous) of premium quality (JOHNSON /

SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick

bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and

washed sharp sand for mortar and fixing with neat white cement slurry,grouting the

joints with neat white cement slurry mixed with required quantities of pigments of

approved make to match the shades of the vitrified tile if required , watering and

curing for 21 days, including cost, conveyance, loading, unloading, royalties and

taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the

work, complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor sqm 670.41 1641.53 1100506.24

First Floor sqm 517.06 1657.12 856836.14

Second Floor sqm 517.06 1672.71 864896.02

19 Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to

10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved

make (JOHNSON/ SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge

in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with

neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties of all materials

all labour, labour cess complete in all respects.

Ground Floor sqm 69.27 1621.86 112346.44

First Floor sqm 56.37 1645.33 92746.19

Second Floor sqm 56.37 1668.80 94069.18

20 Granite Flooring

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm thick) in

floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed

with neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties of all materials

complete in all respects as per direction of Engineer-in-Charge.

Ground Floor sqm 67.42 3445.19 232274.51

First Floor sqm 33.94 3460.77 117456.62

Second Floor sqm 33.94 3476.36 117985.66

21 Granite Skirting

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm thick) in

Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with

neat cement slurry mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all

materials complete in all respects as per direction of Engineer-in-Charge.

Ground Floor sqm 3.21 3617.48 11612.11

First Floor sqm 3.21 3640.95 11687.45

Second Floor sqm 3.21 3848.96 12355.16

22 Ceramic Toilet tiles

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm x40 cm in floors

of size of approved make with 20mm thick bed of cement mortar (1:4) jointed with

neat cement slury mixed with pigment to match the shades of the tiles complete

including cost of all materials,Labour T&P etc required for the work .

Ground Floor sqm 63.47 2668.79 169391.70

First Floor sqm 74.74 2684.38 200628.56

Second Floor sqm 74.74 2699.97 201793.58

23 Ceramic Skirting

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps on 12 mm

thick cement plaster (1:3) Jointed with neat cement slury mixed with pigments to

match the shade of the tiles including rubbing and polishing including cost of all

meterials etc. complete.

Ground Floor sqm 255.19 2436.71 621829.36

First Floor sqm 315.86 2452.30 774575.50

Second Floor sqm 315.86 2468.69 779752.46

Providing and fixing System Aluminum works for Sliding doors and windows of

TOSTEM make with 35mm visible aluminum section width in the center mullion.

The extruded aluminum sections should be made from Grade 6063 & Anodized with

Texguard coating , silicon coated to suit marine atmosphere. All profiles should be

None insulated Profiles. Corner connection will be Butt joint with Screw using Nano

gaskets for sealing. All other major Accessories should also be made by the same

manufacture. All Slider doors & windows will be center locking. Integrated Anti-lift

in slider panel, EPDM gaskets should be used in slider windows & doors in all

meeting points instead of Brush Pile. The outer frame Depth will be 72mm. All

materials which are used should be corrosion-resistant so that they are good

functioning in different environments and that there are no negative influences either

on the aluminum or on the surface treatment.

The system should allow the application of glazing or panels with thickness up to

8mm. The external perimeter of aluminium sections should be Anodized with

Texguard coating, the system should qualify Airtightness 8 m3/h.m2 at 75Pa of

pressure, Water tightness 150 Pa, Wind load resistance 1200 Pa. System should have

a 10-year warranty on properties, functionality and design, within restrictions defined

by technical specifications of anodizing & 1-year warranty on wearing parts only

applies to normal and realistically foreseeable use. All Slider doors & windows will

be center locking .

Sliding upvc door sqm 5.04 9903.50 49913.66

25 UPVC DOOR

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using

UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x

60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion

peofile capable of mounting single glazing system, structurally reinforced with hot

dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated &

welded through fusion welding the door sash shall be fitted with 12mm thick WPC

Board of Greenply make duly fixed with EPDM weathering seal resistant accessories

like clipping locking system made of aluminium 1 No. per set of sashes and th

esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy

glazing/deglazing at site etc. including cost and conveyance of all material,

accessories, labour charges, materials and product conforming to ASTM D 638-

14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the

Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor sqm 37.80 11339.33 428626.60

First Floor sqm 37.80 11339.33 428626.60

Second Floor sqm 31.50 11339.33 357188.83

Terrace Floor sqm 4.20 11339.33 47625.18

26 WPC Door Frame

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite )-

Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite

(Single Extruded Process ) material comparising of virgin PVC polymer of K Value

57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/

Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after

applying PVC solvent Cement & screwed with full body treaded star headed screws

having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified

Company, having good screw holding capacity ( Screw

Withdrawal strength of ( Min. 990 N ),Minimum Compressive Strength of 58

N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class

A category with property of being termite / borer proof , water / Moisture Proof &

Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia

and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge.

Material test certificate and authentication should be compulsory provided by the

manufacturing company. (Make- Rajashree, Amulya,Terra plast)

Ground Floor rmt 64.35 1709.34 109995.78

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Interior Door Hardware Each 13.00 814.20 10584.60

First Floor rmt 94.05 1709.34 160763.07

Interior Door Hardware Each 19.00 814.20 15469.80

Second Floor rmt 94.05 1709.34 160763.07

Interior Door Hardware Each 19.00 814.20 15469.80

27 WPC Door Shutter

Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium

40mm Casement series Door Unit with suitable aluminium extrude profiles. the

system is designed to accommodate 12mm clear Factory made single leaf Solid WPC

(Wood polymer) composite door shutter of 25mm thickcompacted with wood grain

finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be

used as core material for fitting the metal fittings such as tower bolts, aldrops,

handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall

be used for bending the core material, The material and process for manufacturing

the door shutters shall conform to RV-TIFAC composites Design Centre's standards

and specifications and the door shutters Conforming to relevant I.S.specification. The

finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/

Teak wood or any other colour using high quality pigments. Three heavy whight mild

steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of

shutter.

Ground Floor sqm 20.48 5667.35 116039.02

First Floor sqm 29.93 5667.35 169595.48

Second Floor sqm 29.93 5667.35 169595.48

UPVC VENTILATORS

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME section 60mm x

28 60mm & Inbuild gasket (Minium Size 2' X2')

Ground Floor sqm 1.80 6879.13 12382.43

UPVC VENTILATORS

Providing of Upvc Ventilator duly made of Fenstech upvc FRAME section 1000mm

x 60mm & Inbuild gasket (Minium Size 3'4" X2')

Ground Floor sqm 3.00 7658.71 22976.13

First Floor sqm 6.00 7658.71 45952.26

Second Floor sqm 6.00 7658.71 45952.26

30 UPVC WINDOWS

Supplying and installing UPVC - 3 tracks sliding windows and 2 sashes (shutters)

with ss mesh sash dimension of 58 mm x 32 mm and sash dimension of 61mm x

37mm for windows with corners fusion welded, fully reinforced with Galvanized

steel of 1.2 mm to 2 mm. The sash will be fitted with 5mm reflective toughened glass

of make - Saint gobain/ AIS/Gardian/modi. The windows must be installed complete

with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass

packers) and with suitable water draining system. Application of Silicon sealant from

Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all

labour, sundries, T&P etc. complete in all respect as per approved drawing &

direction of Engineer-in-Charge. (Prominence / FENESTA/NCL VEKA LTD. /

Koemmerling/ DURAPLAST/Rajashree).

Ground Floor sqm 46.17 8748.10 403899.56

First Floor sqm 46.17 8748.10 403899.56

Second Floor sqm 46.17 8748.10 403899.56

Terrace Floor sqm 4.86 8748.10 42515.74

31 M.S.Grill

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage

door, collapsible gates with top and bottom rails, steel windows, critical frames for

windows, stair case and parapet railing made out of M.S Square bar/ flat including

stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over

a coat of redoxide primer as per approved drawing and design with cost of all

materials & labour, labour cess, T&P, sundries etc. complete in all respect as per

specification & direction of the Engineer-in-Charge.

Ground Floor kg 1121.34 81.89 91828.78

First Floor kg 1147.74 81.89 93990.72

Second Floor kg 1147.74 81.89 93990.72

32 S.S. RAILING

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using

50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm

@ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3

rows in stair case as per approved design and specification, buffing, polishing etc

with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc.

required for the work complete in all respect as per direction of the Engineer-in-

charge.

Ground Floor kg 352.13 351.42 123744.05

First Floor kg 700.59 351.42 246197.69

Second Floor kg 799.10 351.42 280816.37

33 Synthetic Enamel Paint (Iron Work)

Painting two coat with approved synthetic enamel paint to new iron work over a coat

of Red oxide primer including cost, conveyances, royalties, taxes of all materials and

cost of all labour with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge).

Ground Floor sqm 50.97 219.24 11174.87

First Floor sqm 52.17 224.79 11727.29

Second Floor sqm 52.17 230.45 12022.79

34 Synthetic Enamel Paint (Wood Work)

Painting two coat with approved synthetic enamel paint to new wood work over a

coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials

and cost of all labour with T&P required for the work etc. complete as per

specification & direction of Engineer in charge.

(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge).

Ground Floor sqm 20.48 312.94 6407.36

First Floor sqm 29.93 320.84 9601.20

Second Floor sqm 29.93 328.87 9841.32

35 Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior

grade of approved make & approved shade over a coat of primer to make an even

finished surface in all floors and heights with all scaffolding and staging charges

including cost, conveyance, cost of all labours, T & P, sundries etc. as required for

the work complete in all respect as per the direction of the Engineer-in-Charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

Charge)

Ground Floor sqm 1406.05 116.70 164088.26

First Floor sqm 1418.77 118.35 167916.51

Second Floor sqm 1337.23 120.01 160475.02

Terrace Floor sqm 85.38 121.78 10397.69

36 Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved quality primer to

make an even finished surface in all floors and heights to wall surface of approved

make and shade including sand papering, applying putty wherever necessary & cost

of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess,

T&P etc. complete as per the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-

charge)

Ground Floor sqm 1290.00 126.91 163712.61

First Floor sqm 1210.90 129.43 156731.87

Second Floor sqm 1280.86 132.03 169112.20

Terrace Floor sqm 515.65 134.72 69468.68

37 Cement Primer

Priming one coat with wall cement primer (water bound) to make an even finished

surface in all floors and heights to wall surface of approved make and shade including

sand papering, applying putty wherever necessary & cost of scaffolding, staging

charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as

per the direction of the Engineer-in-charge.

(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-

Charge)

Ground Floor sqm 2696.04 95.93 258641.90

First Floor sqm 2629.66 98.29 258479.55

Second Floor sqm 2618.08 100.65 263519.97

Terrace Floor sqm 601.03 103.13 61985.55

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Item of Work Unit Quantity Rate Amount

38 Putty

Finishing plastered surfaces of walls with cement based wall putty (Water based) of

approved make (JK White/ Birla white or equivalent make duly approved by

Engineer-in-Charge) and finishing the surface smooth and even by sand papering to

receive painting in walls, at all heights with staging wherever necessary with cost,

conveyance, cost of all labour,labourcess, all T&P etc. required for the work

complete in all respect as per the direction of the Engineer-in-charge.

Ground Floor sqm 2696.04 99.00 266913.35

First Floor sqm 2629.66 99.00 260341.35

Second Floor sqm 2618.08 99.00 259194.91

Terrace Floor sqm 601.03 99.00 59503.30

TOTAL Rs. 5,11,70,797.48

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

(GIRL'S HOSTEL)

Sl No Item Description Unit Qty Rate Amount

ELECTRICAL

POINT WIRING

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box, ceiling Rose and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

a) Group-A Nos 85 722.16 61,383.60

b) Group-B Nos 128 1,067.90 1,36,691.20

c) Group-C Nos 216 1,508.04 3,25,736.64

2 Wiring for group controlled looped light point/ fan point/ exhaust

fan point/ call bell point ( without independent switch control ) with

1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, ceiling

rose and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

a. Group-A Nos 130 555.78 72,251.40

3 Supplying and fixing two module stepped type electronic fan

regulator on the existing modular plate switch box including

connections but excluding modular plate etc. as required. Nos 142 553.42 78,585.64

4 Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as required.

5 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing

3 pin 5/6 amps modular socket outlet and 5/6 amps modular

switch, connection etc. as required.

6 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providng and fixing

2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A

modular switch, connections etc. as required. Nos 8 914.50 7,316.00

7 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing

6 pin 15/16 amps modular socket outlet and 15/16 amps modular

switch, connection etc. as required. Nos 34 807.12 27,442.08

8 Supply, delivery, installation & testing of TV outlet boards

containing a clip-in type modular TV Socket outlet fixed on

metallic concealed box including connections and making good the

damages caused complete as required and as per direction of

Engineer-in-charge. Nos 3 676.14 2,028.42

SUB MAIN WIRING -

9 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

required. -

a. 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire Mtr 2349 201.78 4,73,981.22

b. 2 X 4 sq. mm + 1 X 1.5 sq. mm earth wire Mtr 500 221.84 1,10,920.00

c. 4 x 6sqmm + 2 x 2.5sqmm earth wire Mtr 300 374.06 1,12,218.00

d. 4 x 10sqmm + 2 x 4sqmm earth wire Mtr 300 523.92 1,57,176.00

10 Supply and drawing co-Axial TV cable Rg-6, grade 0.7mm solid

copper conductor PE insulated shielded with fine tinned copper

braid and protected with PVC sheath in existing surface/recessed

steel/PVC conduit as required. Mtr 90 113.28 10,195.20

LIGHTING FIXTURES -

Note: Dummy box for surface mounted fixtures only, fans and

exhaust fans with all accessories, as required.(The colour

temprature for fixtures shall be above 4000 deg K, CRI Min 80 &

white in colour as per application) -

11 Supplying & fixing of 9W Downlight, recessed in ceiling, with fixed

light distribution suitable for 9W 6000K LED based lamp with

electronic driver etc,complete with all fixing accessories as

required. Nos 6 1,362.90 8,177.40

Supplying & fixing of 12W Downlight, recessed in ceiling, with fixed

light distribution suitable for 12W 6000K LED based lamp with

electronic driver etc,complete with all fixing accessories as

required. Nos 45 1,805.40 81,243.00

12 Supplying & fixing of 18W Downlight, Surfaced fitting, with fixed

light distribution suitable for 18W 6000K LED based lamp with

electronic driver etc,complete with all fixing accessories as

required. Nos 9 3,363.00 30,267.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Item Description Unit Qty Rate Amount

13 Suppling and fixing single wall mounted 20watt LED type batten

fitting compelet with electronic driver and LED Tube etc directly

wall/ ceiling including conecttion with 1.5 SQMM FRLS PVC

insulated copper conductor and earthing the body etc as required.

14 Suppling and fixing wall mounted 10watt LED type Mirror fitting

compelet with electronic driver and LED Tube etc directly wall/

ceiling including conecttion with 1.5 SQMM FRLS PVC insulated

copper conductor and earthing the body etc as required.

15 Supplying and fixing Surface mounted 10 watt LED type Bulk-head

fitting comprising of pressure die cast housing with acrylic diffuser

(IP65) and complete with integrated electronic driver etc directly on

wall/ceiling including connection with 1.5 sq.mm FR PVC insulated

copper conductor cable and earthing the body etc. as required.

16 Supplying and Fixing of 60 Watt Outdoor LED Luminaires Street

Light (5000 lumen) connected to 32 MM Dia 800 mm GI bend pipe

fixed on Roof or column with GI Clamps & hard ware etc. as

required.(Make:Wipro (Cat No:LR02-671-XXX-57-G3)/ Havells/

Orient/ Philips/ Halonix) Nos 4 7,752.60 31,010.40

17 Supplying and fixing call bell/ buzzer suitable for single phase,230

V, complete as required. Nos 4 251.34 1,005.36

18 Supply, delivery and fixing of Ceiling fan hook box made out of 18

swg GI sheet and containing 10 mm dia round ms bar projecting

atleast 150mm on either side & duly bent to accommodate ceiling

fan down rod bolt & having earthing arrangement as per direction

of Engineer-in-charge. Nos 142 141.60 20,107.20

19 Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as required

as per direction of Engg.-in-Charge. Nos 142 46.02 6,534.84

20 Supply and installation of star rated ceiling fan of following sweep

including wiring the down rods of standard length (up to 30cm) with

1.5sq mm FRLS PVC insulated copper conductor etc. as required.

a. 1200mm Sweep Nos 142 2,655.00 3,77,010.00

21 Supply and installation of ISI marked wall mounted fan of following

sweep including Connection from provided socket outlet.

a. 400mm Sweep Nos 4 3,363.00 13,452.00

22 Supply and installation of 250mm. 230V A.C exhaust fan, with

louver in the existing opening including making good the damage

connection testing commissioning etc as required. Nos 5 2,183.00 10,915.00

23 Supply and installation of 300mm. 230V A.C Heavy duty exhaust

fan, with louver in the existing opening including making good the

damage connection testing commissioning etc as required.

DISTRIBUTION BOARD -

23 Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board of sheet steel,

dust protected, duly powder painted, inclusive of 200 A tinned

copper bus bar, common neutral link, earth bar, din bar for

mounting MCBs (but without MCBs and incomer ) as required .

(Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.) -

a. 4 way (8 + 12), Double door Nos 12 5,038.60 60,463.20

24 Supplying and fixing single pole blanking plate in the existing MCB

DB complete etc. as required. Nos 12 29.50 354.00

25 Supplying and fixing following rating, Four pole, (single phase and

neutral), 415 volts, residual current circuit breaker (RCCB), having

a sensitivity current upto 100 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc. as

required. -

a) 63 amps Nos 6 6,182.02 37,092.12

b) 40Amp Nos 6 6,182.02 37,092.12

26 Supplying and fixing 40 Amps rating, C series,10KA breaking

capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-

Betaguard/ Schneider- Acti 9 in the existing MCB DB complete

with connections, testing and commissioning etc. as required as

per direction of Engg.-in-Charge. .. The MCB should be

Replacement Warranty will be 3 years.. Nos 6 3,499.88 20,999.28

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Item Description Unit Qty Rate Amount

27 Supplying and fixing 63Amps rating,C series,10KA breaking

capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-

Betaguard/ Schneider- Acti 9 in the existing MCB DB in the

existing MCB DB complete with connections as per direction of

Engg.-in-Charge..The MCB should be Replacement Warranty will

be 3 years. Nos 6 3,499.88 20,999.28

28 Supplying and fixing 6 amps to 32 amps rating, 240 volts, C

series,10KA breaking capacity, single poles MCB of Make-

LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the

existing MCB DB complete with connections as per direction of

Engg.-in-Charge. .Warranty on MCB is 3 years. Nos 144 378.78 54,544.32

MV PANELS -

29 HOSTEL LT PANEL -

Design, Fabrication, Supply, Erection,Testing and commisioning of

Powder coated Main LT Panel fabricated out of 14 guage CRCA

sheet steel in cubical, compartmentallised, free standing floor /wall

mounted, dust and vermin proof, with reinforcement of suitable

size angle iron, channel, T -iron or flats as required. Cable gland

plates shall be provided on top as well as bottom of the panels.

Panels shall be treated with all anticorrosive process before

painting as per specification. Panels shall be suitable for 415V, 3-

Phase, Four wire, 50 Hz supply complete with earth bus and lifting

hooks as required in case of large panels.Approval shall be taken

for each panel before fabrication. (All hardwares like nuts and bolts

used shall be Galvanized and Zinc passivated) as per

Specification. -

Type of construction: Form 3B -

IP classification: 42 -

Colour: Gray Powder Coated, as per approved sample -

Incomings: -

Incomer 1:- (EB Supply) -

1 nos, 160 Amps. 4 pole MCCB , i.e four pole Moulded Case

Circuit Breaker of fault breaking capacity 25 KA (ICS=ICU up to

433 V) complete in all respect. -

(ii) 01 set of 0-100Amps Ammeter with CTS. (DIGITAL) -

(iii) 01 set of 0-500 voltmeter . -

One set - Indicating lamp for ON/OFF/Trip and Phase indication

with control fuse/ MCB. -

Bus Bars: -

TPN aluminum bus bars of minimum of 200 Amps capacity with

heat shrinkable colored sleeves and I/C DMC/SMC bus bars

supports at required intervals complete for cross section, size

supports & their spacing etc. for withstanding fault level of 25 MVA

for 1 Sec.

Outgoings: -

Ten (10) - Outgoing Feeders (For 3 LDB, 3 PDB, 1 UPS and 3

Spare) comprising of -

One(1)- 63 Amps, TPN, MCB -

Ten (10) - Outgoing Feeders (For 3 LDB, 3 PDB, 1 UPS and 3

Spare) comprising of -

One(1)- 40 Amps, TPN, MCB -

Four (4) - Outgoing Feeders (For 4 Spare) comprising of -

One (1) 40 Amps, DP, MCB -

Panel complete as above Set 1 1,80,327.60 1,80,327.60

CABLES -

30 Supply of following sizes of PVC sheathed PVC/XLPE insulated

Aluminium conductor armoured cable of 1.1 KV grade conforming

to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

a) 3.5C x 70 Sqmm XLPE cable Mtr 50 510.94 25,547.00

CABLE LAYING -

31 Laying of One No. PVC insulated and PVC sheathed/XLPE power

cable of 1.1 KV grade of following size in the existing

RCC/HUME/MASONERY TRENCH/HDPE Pipe/DWC Pipe/ Metal

Pipe/On Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/

Cable Tray etc. as required. -

a) 25sq.mm to 120sq.mm Mtr 50 186.44 9,322.00

TERMINATION OF CABLES -

32 Supply & Making end Termination with brass compression gland

and Cu/aluminium lugs for PVC insulated and PVC sheathed cable

of 1.1 kv grade (without cost of Cable) -

a) 3.5C X 70sqmm Nos 2 5,505.88 11,011.76

Earthing -

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Item Description Unit Qty Rate Amount

33 S/IT/C of materials and installation of GI earth plate 600mm x

600mm x 6mm thick ISI marked with G. I. nut bolts & washers

including cost of burnt wood charcoal, salt, foreign soil, water

pouring arrangements, brick masonary enclosure on top with

removable RCC cover complete with labour for excavation of pit in

all kinds of soil & rock as required and as per direction of

Engineer-in-charge.The entire earthing system should be

Replacement Warranty will be 2 years Nos 2 7,670.00 15,340.00

34 Providing and fixing 25 mm X 5 mm dia GI strip on wall/surface or

in recess for connection etc. as required. Mtr 20 177.00 3,540.00

LIGHTING ARRESTER -

35 Supply of 8 mm Aluminum Round Conductor.Tested as per IEC

62561. as per direction of engineer in charge. Mtr 280 175.82 49,229.60

36 Supply of Roof conductor holder for parapet- Polyamide Conductor

holder:With M8 female thread or diameter 7mm, M8 Screw to

connect the conductor holder.Weather and temperature resistant

from -35 to +90 degree Celsius tested. Conductor holder @ 1

meter distance.Tested as per IEC 62561. as per direction of

engineer in charge. No 120 60.18 7,221.60

37 Supply of Polyamide roof cable holder for flat roof: DIN 48829

Form B1. Closed form with bottom. Filling weight 1Kg (frost-

resistant concrete). Sleeve from polyethylene, black @ 1 meter

distance. Tested as per IEC 62561. No 30 234.82 7,044.60

38 Supply of Connector: For T cross and parallel connectors. Quick

installation using hexagonal bolt M10X30 high-grade hot dip

galvanised. Tested as per IEC 62561.(2nos/expansion piece ).

39 Supply of Vertical air terminal with accessories:Providing of Air

terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm

aluminium rod: 1 Mtr Airterminal: semi-hard (E-AlMgSiO5

corresponds to DIN 48801) Suitable for high wind load. Tested as

per IEC 62561. No 6 1,950.54 11,703.24

40 Supply for Providing of Stand for Fang Fix system 16 kg with base

and clamp ,made up of frost resistant concrete and clamp tested

upto 100KA lightning current . No 6 2,902.80 17,416.80

41 Supply of Test Joint (Folding Clamp) suitable to connect 8mm

round conductor and max by 30x3 mm GI strip as specified in

drawing and directed by Engineer. Tested for 100kA lightning

current. No 4 448.40 1,793.60

42 Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr

Height For Test Joint .Internal dimensions: 100x100x48 mm.

43 Supply of Galvanised Steel Flat 30X3 mm thickness from earth

electrode directly in ground as required. Flat conductor Hot Dipped

Galvanized. Tested as per IEC 62561. Mtr 50 318.60 15,930.00

44 Supply for Providing of Cross connector for Flat: Suitable for

30mm Galvanised steel strip. Installed with 4 nos of hexagonal

plate. Tested for 100kA lightning current. No 4 297.36 1,189.44

45 Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2

x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-

dip galvanised steel, Bottom section from polyamide, black. Tested

as per IEC 62561. No 10 307.98 3,079.80

46 Supply for Providing of Plastic Corrosion Protection strip: Approx

1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical

fibre fabric. Mtr 50 1,037.22 51,861.00

47 Supply of UL Listed maintenance free ,Low carbon copper coated

earth rod of 3 metre electrode having diameter of 17.2 mm with

copper coating thickness of 250micron tested as per IEC 62561-2.

48 Supply of universal clamp made of SS to connect rod with flat

conductor. No 4 1,046.66 4,186.64

49 Supply of Earth conductivity enhancing mineral compound shall be

of 25 kg/pit tested as per IEC 62561-7,TCLP tested. No 4 3,348.84 13,395.36

50 Supply of The above arrangements shall be provided with Heavy

duty earth champer of 5000kg load bearing capacity to ensure the

safety of earthing system. No 4 2,559.42 10,237.68

51 Installation of The above arrangements including all accessories

as per Direction of Engg. In charge. Job 1 41,300.00 41,300.00

A. FIRE EXTINGUISHER -

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Item Description Unit Qty Rate Amount

1 Providing and fixing Carbon-di-oxide fire extinguishers consisting

of welded M.S cylindrical body,squeeze lever discharge valve fitted

with internal discharge tube, ISI marked high pressure discharge

hose, discharge nozzle, suspension bracket, confirming to IS :

15683 finished externally with red enamel paint and fixed to wall

with brackets with rawl plug/dash fasteners complete with internal

charge with CO2 gas conforming to IS : 307-1996..

a) Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006) Nos 6 9,086.00 54,516.00

2 Providing and fixing ABC stored pressure dry chemical powder

(mono ammonium phosphate) Fire Extinguisher IS : 15683 latest

revision manufacturer and of CRCA sheet in welded construction,

finish with High quality epoxy polyster powder coated complete

with brass forged ball valve, gun metal cap and nozzle, including

initial filled and wall suspension bracket (suitable for fighting in

class 'A', B & 'C' that is wood, textile, flammable liquid, electric and

gases). -

a) Capacity 6 Kg (IS : 15683 : 2006) Nos 16 3,851.52 61,624.32

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons

free. [2] The Fire Extinguisher Manufacturer/Supplier shall provide

declaration, Technical Data Sheet/cutsheet of All type of Fire

extinguisher to be installed. -

B. MISCELLANEOUS WORK : -

3 Single sided EXIT LED Light fitting signage(both side visible) with

built in battery back-up for 2 hrs with proper wiring with PVC

conduiting from the existing power sources for all floors etc.

CCTV SYSTEM -

1 Supply,installation, testing and commissioning of 32 Channel DVR

1080P with 2 Sata Ports upto 10TB each, 32 BNC interface,

supporting coaxitron connection. HDTVI input of 4MP@30fps,

4MP@25fps, AHD input 4MP 1080p@25fps with 1CVBS output,

1HDMI output, 1VGA output, 1 audio input, 1oudio output. Video

compression of H.265 pro+/H.265 pro/H.265/H.264+/H.264.

2 Supply,installation, testing and commissioning of 4 MP Dome /

Bullet Camera with 25 Mtrs IR Range. 26 Nos 8,850.00 2,30,100.00

3 Supply & Laying of RG59+ 3 Core cable using Rigid PVC Pipe in

concealed manner per running metre of cable laid. 780 Mtr 82.60 64,428.00

4 Supply,installation, testing and commissioning of BNC & DC

Connectors. 52 Nos 88.50 4,602.00

5 Supply,installation, testing and commissionining of 8 TB CCTV

Surveillance Hard Disk. 2 Nos 23,600.00 47,200.00

6 Supply,installation, testing and commissionining of 10 Amps Power

Supply. 2 Nos 5,310.00 10,620.00

7 Supply,installation, testing and commissioning of Smart 32" LED

Monitor. 1 Nos 29,500.00 29,500.00

8 Supply,installation, testing and commissioning of 10 Mtrs HDMI

Cable. 1 Nos 14,160.00 14,160.00

9 Supply,installation, testing and commissioning of Bird Canopy. 26 Nos 885.00 23,010.00

10 Supply,installation, testing and commissioning of Wireless Mouse.

11 Supply,Installation,Testing & Commissioning of 6U/500D Wall

Mount Rack with Accessories: The rack size should be 600W x

500D, Front frame integrated with top, bottom, front and two side

panels for better rigidity and strength, Front Glass Door with Lock

loaded, Compliance with standards shall be UL 2416., DIN 41494,

IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO

9001:2008 including Power Distribution Unit (06/16 Amp Indian-

Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp

MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable

2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB

42), 2nos 1U Metal Cable manager with Plastic cable loops and

H/W screw. 1 Nos 10,131.48 10,131.48

TOTAL 41,69,540.62

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

(GIRL'S HOSTEL)

Sl No Description Unit Qty Rate Amount

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming

to IS:15778/ASTM Pipe, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one Mtr 30.00 338.13 10143.87

step CPVC solvent cement and testing of joints complete as per direction of

Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes

2 25mm dia C-PVC Pipes Mtr 20.00 377.03 7540.67

3 32mm dia C-PVC Pipes Mtr 10.00 661.63 6616.26

4 In First Floor Mtr 30.00 352.01 10560.17

20mm dia C-PVC Pipes

5 25mm dia C-PVC Pipes Mtr 35.00 461.40 16149.13

6 32mm dia C-PVC Pipes Mtr 15.00 677.62 10164.23

7 40mm dia C-PVC Pipes Mtr 5.00 914.38 4571.91

8 In Second Floor Mtr 30.00 366.00 10980.02

20mm dia C-PVC Pipes

9 25mm dia C-PVC Pipes Mtr 35.00 475.41 16639.36

10 32mm dia C-PVC Pipes Mtr 15.00 693.59 10403.88

11 40mm dia C-PVC Pipes Mtr 5.00 934.87 4674.33

12 In Terrace Floor Mtr 60.00 709.58 42574.87

32mm dia C-PVC Pipes

13 40mm dia C-PVC Pipes Mtr 28.00 955.40 26751.17

14 50mm dia C-PVC Pipes Mtr 10.00 1412.09 14120.94

15 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil

waste ventilating pipes and fittings of the following outside diameter

conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden

plugs or laying in trenches including jointing with supply of approved rubber

lubricant by non-heat application method/as per manufacturer ’ s specification, Mtr 160.00 399.19 63871.04

testing, earthwork in excavation in all kinds of soil and refilling of trenches as

per specification and direction of the Engineer in charge. (Supreme, Astral,

Ashirbad) .

75mm SWR pipes

16 75mm PVC plain bend Each 20.00 217.12 4342.40

17 75mm PVC socket plain Each 32.00 95.93 3069.89

18 110mm SWR pipes Mtr 125.00 581.62 72702.75

19 110mm PVC 'P' trap Each 16.00 586.81 9389.02

20 110mm PVC socket plain Each 30.00 188.92 5667.54

21 110mm PVC plain bend Each 20.00 273.76 5475.20

22 110mm PVC door bend Each 6.00 346.45 2078.69

23 110mm PVC door Tee Each 12.00 455.48 5465.76

24 110mm PVC plain Tee Each 35.00 380.79 13327.51

25 110mm PVC door cross Tee Each 6.00 650.42 3902.50

26 110mm dia U-PVC Offset without ear Each 8.00 480.73 3845.86

27 110mm PVC vent cowl Each 14.00 68.68 961.46

28 110mm PVC Clamp Each 52.00 50.50 2626.21

29 Supply,Providing, fixing, testing and commissioning in position UV stabilised

75 mm dia UPVC Rain water pipe with Fittings (IS: 13592 Type - B). In case Mtr 45.00 419.16 18862.18

of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer

in charge.110 mm diameter. (IS:13592, Type -B).

30 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water Each 3.00 115.85 347.56

pipes 110 mm dia.

31 Supplying all materials , labour, T&P and fixing Vitreous china water closet

,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly

embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size

including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing

100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the Each 10.00 3042.87 30428.66

trap with pan in cement mortar (1:1), cutting the floor and mending good the

damages etc. all complete as per P.H. specification and direction of Engineer-in-

charge .

580mmx440mm size Orissa Pan (White) (Parryware/ Hindware/ Somay/ Cera)

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

32 Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina

washed down water Closet (European type water closet - EWC) with integral

"P" or "S" type trap to the floor including wodden plug and chromoum plated

screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat

cover for washed down water closet with crmium plated brass hinges and rubber Each 16.00 3289.84 52637.44

buffers including polishing etc all complete as per specification and direction of

Engineer-in-charge.

European Water Clost "S" or "P" trap (Parryware/ Hindware/ Somany/ Cera)

33 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern

complete with fittings & seat cover, one no hinged rail 76 cm and five nos of Each 1.00 78575.49 78575.49

grab rails 60 cm) (Hindware).

34 Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low

level flushing cistern with a pair of cast iron or M.S brackets complete with

fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve

with polythene float CP brass handle, unions and couplings for connection with

inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet Each 26.00 1851.77 48146.12

connection pipe including cutting holes and making good the same and

connecting the flush bend with cistern and closet and connecting the inlet pipe

with supply main etc all complete as per specification and direction of the

Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white)

35 32mm dia flush bend for L/L cistern Each 26.00 81.77 2126.12

36 Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar

taps with cast iron or MS brackets painted white including cutting holes in walls

and making good the damages with supply of wooden plugs, screws and cement

etc. fixing pedestral for wash basin recessed at the back for the reception of

pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash

basin including brass check nut complete, fixing pillar taps capstan head screw

down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back Each 4.00 4843.90 19375.60

nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and

making connection with pillar cocks and supply mains for wash basin , fixing

12mm dia CP brass waste etc.all complete as per specification and direction of

Engineer-in-charge.

550mmx400mm size wash hand basin with Porcelain

pedestal(Parryware/Hindware/Somay/Cera)

Under Counter basin (560x450) (Hindware) Each 26.00 3319.34 86302.84

37 32mm dia PVC waste pipe with brass coupling nut Each 30.00 62.58 1877.26

38 15mm dia PVC inlet connection pipe 0.45m long Each 30.00 42.13 1263.78

39 Supplying all materials, labour, T&P and fixing wash Kitchen sink/ Laboratory

sink with outlet at end and weir overflow including fitting and fixing a pair of

cast iron or MS brackets painted white, fixing 50mm/40mm dia ss waste, fixing

50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, Each 3.00 6271.07 18813.22

screws and cement etc including cutting holes in walls and making good the

damages etc all complete as per specification and direction of the Engineer in

charge. 600x450x250 mm stainless steel kitchen sink (Jayna make)

40 Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of

the following nominal bore with supply of all jointing materials complete as per Each 16.00 1085.60 17369.60

specification and direction of the Engineer in charge.

15mm dia CP 2way bib cock (Euronics RIV-1004R)

41 15mm dia CP Health faucet with Hose Pipe (Euronics EHF01) Each 16.00 895.62 14329.92

42 15mm dia CP Short Body Bib cock (Euronics RIV-1010R) Each 10.00 824.82 8248.20

43 15mm dia CP Long Body Bib cock (Euronics RIV-1011R) Each 27.00 919.22 24818.94

44 15mm dia CP Angle stop cock with wall Flange (Euronics RIV-1003R) Each 105.00 1393.82 146350.68

45 15mm CP Revolving shower with shower Arm. ( Plaza make) Each 23.00 743.28 17095.49

46 20mm dia CP Consealed Stop Cock (Jaquar ALD-CHR-081 Each 23.00 2003.64 46083.72

FLR-CHR-5083NK)

47 Sink Cock (Wall Mounted) with wall Flange(Euronics RIV-1012R) Each 3.00 1532.82 4598.46

48 15mm dia CP Pillar cock (Euronics RIV-1002R) Each 30.00 1096.22 32886.60

49 15mm dia CP extension piece Each 50.00 69.97 3498.70

50 PVC Connection Pipe Each 59.00 40.12 2367.08

51 PVC Discharge Pipe Each 35.00 92.75 3246.18

52 15mm dia. C.P flange Each 100.00 47.55 4755.40

53 125mm dia CP gratting Each 62.00 110.33 6840.46

54 Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel

rail / Towel ring complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and Each 23.00 924.92 21273.15

direction of Engineer-in-charge .

25mmx600mm long CP Towel rail

55 C P Towel Ring Each 15.00 636.48 9547.20

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

56 Supplying all materials ,labour ,T&P and fixing CP Soap Holder/ Soap

Dispenser complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and Each 23.00 262.05 6027.25

direction of Engineer-in-charge .

CP soap holder

57 CP soap dispenser Each 18.00 2713.54 48843.72

58 Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook

alongwith all necessary accessories complete including cutting, making good the

walls, floors, slab wherever complete in all respect as per specification and Each 23.00 342.20 7870.60

direction of the Engineer in charge. (Jaquar/ Hindware/ Cera) .

Stainless Steel Coat Hook - Double (Euronics EC02)

59 Supplying all materials ,labour ,T&P and fixing Mirror of superior glass

mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs

with chromium plated brass screws and washers etc.all complete as per Each 30.00 939.16 28174.86

specification and direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm

60 Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings

of the following nominal bore with supply of all jointing materials complete as Each 10.00 1168.51 11685.07

per specification and direction of the Engineer in charge.

25mm dia Brass F.W valve (Sakti make)

61 32mm dia Brass F.W valve (Sakti make) Each 6.00 1711.44 10268.62

62 40mm dia Brass F.W valve (Sakti make) Each 4.00 2165.41 8661.62

63 40mm dia CPVC Ball valve Each 5.00 1116.34 5581.70

64 Supplying all materials, labour, T&P and providing fitting and fixing (Aqua

guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water

storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for

normal water including a flow of 1.5 ltr per minute etc all complete as per Each 3.00 132445.56 397336.68

approved drawing,specification and direction of the Engineer in charge.

Pure Chill 80 PSS UV Make-Aquaguard/Usha

65 Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene

cylindrical vertical water storage tanks conforming to IS : 12701--1996

including cutting holes through the tank and fixing mild steel tubes and fittings

and providing extra sockets and jam nuts, fixing ball valve etc, including

hoisting upto a height of 5 metres above ground level and placing the tank to the

required position and providing 1st class K.B brickwork in cement mortar (1:6)

of 0.46m height in staging and in circular protection wall to support the tank, Each 1.00 56731.21 56731.21

12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size

1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m

average length in cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all materials to

worksite etc all complete as per specification and direction of the Engineer in

charge.

Fixing 3000Ltr Roto-moulded water storage tanks-In Terrace floor

Fixing 5000Ltr Roto-moulded water storage tanks-In Terrace floor Each 1.00 82294.31 82294.31

66 B- External Supply & Discharge portion

Supplying all materials ,labour ,T&P and constructing gully trap chamber of

inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement

concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation

concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around

trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside Each 4.00 2294.88 9179.50

12mm thick cement plastering (1:3) finished with a floating coat of neat cement

including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI

grating etc.all complete as per drawing, specification and direction of

Engineer-in-charge.

In side size 250mmx250mm

67 Supplying all materials ,labour ,T&P and constructing Inspection Chamber of

inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm

size crusher broken hard black granite metal on bed , KB brick work in cement

mortar (1:6) in foundation and plinth, moulding and shaping the channel inside

and benching with cement concrete (1:2:4) using 12mm size crusher broken

hard black granite chips, 12mm thick cement plaster (1:3) with cement punning

to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using each 10.00 13806.18 138061.77

12mm size crusher broken hard black granite chips with R.C.C man hole cover,

earth work in excavation in all kinds of soil and refilling the cavity around the

chamber including watering,curing,cost of all materials, conveyance of all

materials to worksite, payment of royalty,all taxes etc.all complete as per

approved drawing, P.H specification and direction of Engineer-in-charge .

Inside size : 760mmx760mmx460mm

Digitally signed by JAYA

PRAKASH GURU

Date: 2025.02.27 21:14:05 IST

Sl No Description Unit Qty Rate Amount

68 Supplying all materials, labour, T&P and constructing Circular Type Man Hole

Chamber of the following size with cement concrete (1:4:8) using 40mm size

hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5),

moulding and shaping the channel inside and benching with cement concrete

(1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with

punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab each 2.00 26857.56 53715.11

in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil

and refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty,taxes etc all

complete as per approved specification and direction of the Engineer in charge.

Inside size : 910mmx910mmx910mm

69 Providing and fixing in position Polyproplene Foot steps of required shape and each 6.00 273.76 1642.56

approved quality as per the direction of E.I.C.

70 Providing Lowering, Laying, Jointing and Testing Work of non-pressure NP 3

class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the Mtr. 90.00 532.42 47917.44

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints:

71 E- Construction 1 nos 120 users RCC Septic tank

Earth work in excavation of foundation in all kinds of soil within 50m initial

lead and 1.5m initial lift including rough dressing & breaking clods to cum 59.40 344.21 20445.84

maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as

per direction of the Engineer-in-Charge.

72 - do - with addl. Depth of 1.5 m cum 37.62 369.58 13903.45

73 Supplying all materials,labour ,T&P and filling in foundation and plinth with

sand well watered and rammed including cost, conveyance of all materials to

work site ,payment of royalty,taxes etc. all complete as per direction of the cum 5.94 1194.99 7098.22

Engineer-in -charge.

In ground floor- 1x9.90mx4x0.15m=

74 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 )

with 4cm size crusher broken hard granite metal including watering, curing, cost

of all materials,conveyance of all materials to work site with payment of royalty, cum 5.94 7051.80 41887.68

all taxes etc all complete as per P.W.D specification and direction of Engineer-

in-charge.

In ground floor- 1x9.90mx4x0.15m=

75 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 )

with 12mm size crusher broken hard black granite chips including watering,

curing,cost of all materials, conveyance of all materials to work site with cum 3.47 9391.62 32598.31

payment of royalty, all taxes etc all complete as per P.W.D specification and

direction of Engineer-in-charge.

In ground floor- 1x8.90mx3x0.13m=

76 Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3)

with 12mm size hard broken granite chips for R.C.C works including hoisting,

laying, watering, curing, conveyance of all materials to worksite, payment of cum 27.87 10255.50 285820.73

royalty, taxes etc all complete as per specification and direction of the Engineer

in charge.

77 Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for R.C.C works including false work and dismantling them after