Loading…
Loading…
Tender Value
₹12.7 L
EMD Value
₹31,700
Closing Date
12 Jun 2026, 3:00 pm4d left
Chief Engineer, TTD, Tirupati
Room No.128, Admn Building, Tirupati
Providing poles with folld lights around compound wall and wiring to Morcha for Security purpose in SV Temple, TTD, Manjeenm Jammu (J&K)
940116
57/DE(Elec)-II/TTD/TPT/2026-27
OPEN - NCB
Electrical Works
CHITTOOR
6 documents required · 6 mandatory
₹449
₹31,700
28 May 2026
28 May 2026
28 May 2026
Fabrication, Transportation and supply of hot - dip galvanized Octogonal pole with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to with stand the wind speed of 180 KMPH for 5.0 Mtrs height Pole having dimensions Bottom 130 mm. Top 70mm with 3 mm thick, base plate 200 x 200 x 12 mm and 4 Nos of M20 x 700 long J" bolts along with template. Makes: Bajaj / Valmont / Laasma / Transrail / Utkarsh / Skipper.
Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes: Bajaj / Valmont / Laasma / Transrail / Utkarsh / Skipper
Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.
Above 4.5 metre and upto 6.5
Supply of 3 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000- 4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P.F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21- 1 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .
Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.
Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.
Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.
Design, Fabrication, Supply, Installation and Commissioning of Outdoor type timer box of size 600mm(W) x 600mm(H) x 300mm(D) and made with 14SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made by provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air / Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 700mm each of 40x40x6mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red-oxide. The timer box legs should be fixed in ground of size 400mm depth by using 20mm HBG metal in 1:3:6 ratio.
A 9 Ply - 18 mm thick plywood sheet of size 0.50 m x 0.50m to fix inside the box and the following shall be supply and fix firmly on the ply wood sheet and giving necessary connections between Isolator - contactor - timer - out going MCBs etc., with suitable size of PVC copper wires /bus links and suitable holes to be made at bottom sheet of the box for incoming / outgoing cables and install the box at site as directed during execution by the site Engineer. a) Incoming: 63A FP Isolator - 1 No. b) Out Goings: 40A 4-pole MCB - 2 Nos. c) LED indicator lamps - 3 Nos. d) ML - 4 3 Pole, 415 V Power Contactor L & T) - 1 No. e) Togele / 6 Amps 2 Way Switch and giving connections.- 1 No. f) Digital Time Switch (L & T) - 1 No. g) An earthing terminal should be provide to the box. h) Danger name plate -1 No. i) The ratings of switches, feeder name, bus bar / cable chamber etc., shall be indicate on panel with stickering letters as directed during execution.
Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.
Supply of 3 core, 4.0 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
Supply and Fixing of 8 or 9 Module Plastic Surfaces box with Modular cover plate / Mith frame on to the wall with all required accessories and all labour charges etc., complete of make: Legrand Arteor / Legrand Mosaic / North West / M.K / G.M / L&T
Supply and Fixing of ISI Mark 20mm outer dia heavy grade (2.10mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3 pin 5/6 A socket outlet
6 pin 15/16 A socket outlet
Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex
Supply and transportation of 60 W LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, having system efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, IK05, Driver surge protection 4KV, in-house additional surge protection ≥ 5KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/ HPL/ Jaquar/Eveready / Surya (ORION-II)/ FortuneArrt (UFO-S) /Rhino(GPHB02 Series) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG .
Supply and fixing of 6 to 32 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification: (a) The Earth Electrodes, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 2 meter long, galvanized, including 1 bag (25Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.
b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts & washers. (e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.
Supply and run of ' 8 ' SWG GI wire for earth electrode to required places buried in ground at not less than 0.5 mtrs below the ground level after excavation of trench and filling with 6" sand all around the earth strip and refilling etc., and giving necessary connections with 3/8" x 2" GI, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Supply of 16" (400mm) Wall mounted Fan. Makes: Crompton Wind Flo / Bajaj Elite / Havells Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/ Goldmedal(Nora-16)
Fixing of Wall mounting fan / Air circulator 9" to 18" on wall with 3/8" x 4" bolts, nut & washers and giving connections in the existing plug & socket board / light point etc., complete.
Supply & Making heat shrinkable outdoor straight through joint for 3.5 core 70 / 95 / 120 Sq.mm size of PVC / XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc., as required. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang
Supply and fixing of LT cable route indicators made out of cast iron fixed to one meter long 1''x1''x1/4'' MS angle 4'' bent at one end buried in the ground and the other end fixed with G.I. bolts and nuts to the cable route indicators as directed during execution.
(Rupees Twelve Lakh Sixty Seven Thousand Six Hundred Forty three and Paise Twenty Six only)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NIT 57.docx
TENDER_DOCUMENT • 0.21 MB
Schedule 57.xls
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid