Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹1.5 L+₹4,750.25 (3.16%)Rejected-AOC | L2 | Rejected-AOC REJECT |
| Sl No | Description | Qty | Unit | BABYKUTTAN P L2 | B GOPAKUMAR L1 |
|---|---|---|---|---|---|
| 1.00MAINTENANCE | |||||
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 151.78 | kg | 180 ₹27,320.4 | 175.74 ₹26,673.82 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.43 | cum | 9,540 ₹4,121.28 | 9,097.43 ₹3,930.09 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 217.99 | kg | 200 ₹43,597.2 | 191.35 ₹41,711.62 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 132.6 | kg | 190 ₹25,194 | 184.24 ₹24,430.22 Lowest |
| 1.00 | OD192310/2025-2026:Providing and fixing Galvanized Iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm ( + 0.05 %) total coated thickness with zinc coating120grams per sqm as per IS 277, in 240mpa steel grade,5-7microns epoxy primer on both sidof the sheet and polyester top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 71.61 | sqm | 625 ₹44,756.25 | 611.78 ₹43,809.57 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 30.03 | sqm | 170 ₹5,105.44 | 162.38 ₹4,876.6 Lowest |
| 1.01 | OD287728/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block
made by block making machine with strong vibratory compaction, of approved size,
design & shape, laid in required colour and pattern ,etc. all complete as per the direction
ofEngineer-in-charge.
Details of cost of 10 sqm | 4.44 | sqm | 1,095 ₹4,861.8 | 1,075.27 ₹4,774.2 Lowest |
Tender Value
₹1.5 L
EMD Value
₹3,812
Closing Date
28 Jan 2026, 6:00 pmClosed
Assistant Engineer
Kulakkada GP
MAINTENANCE OF ANGANWADI NO 45_PrNo 125_26
2026_LSGD_829070_7
3/AE/LSGD/KDA/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kulakkada GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹3,812
Yes
26 Feb 2026
21 Jan 2026
31 Jan 2026
21 Jan 2026
28 Jan 2026
21 Jan 2026
MAINTENANCE
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD192310/2025-2026:Providing and fixing Galvanized Iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm ( + 0.05 %) total coated thickness with zinc coating120grams per sqm as per IS 277, in 240mpa steel grade,5-7microns epoxy primer on both sidof the sheet and polyester top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD287728/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern ,etc. all complete as per the direction ofEngineer-in-charge. Details of cost of 10 sqm
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1392143.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.39 MB
epay.pdf
Tender Documents • 0.24 MB
preli.pdf
Tender Documents • 0.26 MB
ipact.pdf
Tender Documents • 0.24 MB
form.pdf
Tender Documents • 0.25 MB
affi.pdf
Tender Documents • 0.24 MB
BOQ_1392143.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 2.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .