Routine Civil Maintenance works in Township area of FACT Cochin Division, Ambalamedu, Kochi.

Supplying Angle valve with wall flange of standard range (CERA,JOHNSON or equivalent)

Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl.instructions

Supplying 600 x 450 mm or nearest size bevelled edge mirror of approved quality superior make " with hard board or plastic sheet on the rear and fixing the same in position with necessary plugs & SS screws etc complete

Dismantling and removing windows/ ventilators/ shelves/ cup boards/ AC frames etc including removal of shutters, hinges, holdfasts and all other fittings and stacking materials as per deptl.instructions

Dismantling and clearing away any thickness of rubble, brick, laterite in CM including disposal of debris as per directions within a distance of 150 m.

Dismantling the existing structural carefully without damaging the remaining portions including conveying and stacking at places pointed out & removal of debris if any within a lead of 150 m.

Clearing grass & other over growth of vegetation & small trees of girth up to 30 cm including removal of rubbish up to a distance of 150 m outside the periphery of area cleared as per deptl.instructions

Dismantling carefully the existing weather proof course of brick jelly concrete & roofing tiles over roof slabs at all heights including stacking the serviceable materials and depositing the debris to 150 m as per instructions.

Chipping and fixing plugs in walls.

Clearing sludge from septic tank & depositing it to suitable places by mechanical transport or by digging pit & filling back with earth, flushing the entire sewage line with water of adequate pressure, removing all debris etc. by engaging suitable type of men & tools after carefully removing cover slabs & closing the same after the completion of the work, sealing properly with cement plastering etc complete as per instructions. - Up to 5 Cu.m volume

Cleaning the structural/other surface neatly at all heights, manually with suitable tools or with high pressure water jet spray (using suitable mechanical means), and scraping if required, to remove the whole accumulated dust, rust, dirt etc as per departmental instructions.

Clearing sludge from septic tank & depositing it to suitable places by mechanical transport or by digging pit & filling back with earth, flushing-Extra charges for every 5 Cu.m volume or part thereof (If volume is above 10 Cu.m)

Earth work excavation in all classes of soil including narrickal but excluding hard rock which require blasting including back filling in basement & sides of foundation, depositing on bank within an initial lead of 50 m including breaking clods, watering, ramming and sectioning of spoil bank etc.complete- Up to 1.5 m depth from ground level.

Cement Concrete 1:4:8 using 40 mm hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete for foundation leveling course, flooring etc.complete as per deptl.instructions.

Flooring with PCC 1:2:4 mix concrete using first class 20 mm and downgrade hard granite broken stone including mixing concrete, laying in panels, necessary formwork, consolidating, curing etc complete

Clearing sludge from septic tank & depositing it to suitable places by mechanical transport or by digging pit & filling back with earth, flushing the entire sewage line with water of adequate pressure, removing all debris etc. by engaging suitable type of men & tools after carefully removing cover slabs & closing the same after the completion of the work, sealing properly with cement plastering etc complete as per instructions - Above 5 Cu.m & up to 10 Cu.m volume

Grouting pockets of holding down bolts (H.D.Bolts), base plates etc.with cement mortar 1:1 excluding cost of cement.

Supplying, “ CONBEXTRA GP 2” or equivalent epoxy grout for grouting works.

Providing formwork to RCC works with necessary wooden planks, joists, runners, posts etc.including removal after completion of works- For foundation footings etc.

Chipping & removing mosaic flooring / skirting in the toilet rooms and other areas very carefully without damaging the remaining portions and water supply items and removing the debris to places pointed out by the department.

Random rubble Masonry in CM 1:6 using departmental rubble for foundation and basement excluding cost of cement

CD-CIV-MISCCIV01

Brick work in CM 1:6 with country burnt bricks of nominal size for foundation and basement.

Brick work in CM 1:6 with country burnt bricks for super structure in ground floor up to 5 m height.

Brick work in CM 1:6 with country burnt bricks- For super structure in First floor up to 5 m height or in each successive floor up to 5 m height, add to the corresponding item of work on super structure of previous floors.

Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement

Cement plastering with CM 1:4,15 mm thick one coat floated hard and trowelled smooth at all levels.

Trimming, dressing & sectioning of road berms, slopes & earth surface in all classes of soil and disposal of rubbish up to a distance of 150 m and levelling the area.

Random Rubble masonry in CM 1:6 for foundation and basement using Contractor's own rubble,excluding cost of cement

Collecting spoil earth, debris etc.from site, conveying to places with an average lead of 1 KM by mechanical transport, dumping and forming embankment for filling, spreading in layers as per directions (20% deduction will be made if measured loose in lorries & from stack).

Supplying and fixing Anjili wood planed and framed work in position to the lines and levels etc. complete as per deptl. instructions.

Providing reinforcements to RCC works with MS / Tor steel rods including all charges for conveying, straightening/uncoiling, cutting, bending, placing rods in position & tying with GI / black annealed tying wire of suitable gauge etc. complete. excluding cost of reinforcement.

Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Pointing to Random Rubble/ laterite/ cement block masonry with CM 1:3 at all heights excluding cost of cement

Providing, fabricating & fixing in position to the door frame already provided, first class well seasoned Anjili wood single leaf/double leaf fully paneled shutters with 150 x 35 mm bottom & lock frames, all other frames 100 x 35 mm & 18 mm thick panel planks including all labour charges for fixing all hardware but excluding cost of hardware etc.complete.

Supplying and fixing Anjili wood wrought and put up work in position to the lines and levels etc.complete as per deptl.instructions.

Providing & fixing in position fully glazed shutters in first class well seasoned Anjili wood & 3 mm thick plain glass, to suit the window frames already fixed with 70 x 30 mm outer frames & one intermediate horizontal and 20 x 12 mm teakwood beadings with necessary brass wire nails including all charges for fixing hardware but excluding cost of hardware etc.complete.

Providing & Fixing in position fully glazed shutters (top or center hung) in first class well seasoned Anjiliwood & 3 mm thick plain glass to suit the ventilator frames already provided with 70 x 30 mm frames and 20 x 12 mm teakwood beadings & brass wire nails including all charges for fixing hardware but excluding cost of hardware etc.complete.

Taking & refixing RCC cover/cable trench/other slabs at site including grouting if required, for all sizes.

Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40 mm or nearest including providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications.

Labour for woodwork planed and framed work with deptl.materials.

Supplying and fixing approved quality top cover for rolling shutter with two coats of chemical resistant enamel paint of approved quality and colour over two coats of zinc chromate primer.

Servicing of rolling shutters, collapsible gates & rolling grills including all costs for lubricating the moving parts, adjusting the spring, tightening the bolts & nuts and replacement of parts wherever necessary and rendering the shutter to operate smoothly.

Supplying and fixing ball bearing for rolling shutter

Supplying and fixing wire spring grade 2 for rolling shutters

Servicing of Aluminium doors including all costs for lubricating the moving parts, adjusting the spring and replacement of parts wherever necessary and rendering the shutter to operate smoothly.

Labour for woodwork in wrought and put up with deptl.materials.

Glazing the Aluminium frame work of windows with 3 mm or nearest thick plain glass panes and anodized Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors / windows / ventilators)

Providing and fixing PVC door shutter consisting of shutter frame made of extruded plastic section having dimension of 60 x 24 mm, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm including providing and fixing all required fittings such as SS butt hinges, PVC tower bolts, PVC handles with screws, etc.complete as per manufacturers specifications (PVC door shutter only)

Glazing the Aluminium frame work of doors/other areas with 5.50 mm or nearest thick plain glass panes and anodized Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors/other area)

Supplying and fixing 3 mm or nearest thick hylam sheets of approved brand for fixing inside of aluminium frame work with rubber beadings and screws as per standard practice at all levels

Providing 3 mm thick plain glass for glazed shutters, partition etc with wooden fillet, putty etc. including dismantling broken glass etc.

Providing 6 mm or nearest thick plain glass for glazed shutters, partition etc. with wooden fillet, putty etc. including dismantling any broken glass.

Glazing/Panelling the Aluminium frame work of doors/other areas with 5.50 mm glass and 4 mm thick hylam sheets (40% hylam sheet aproximate) and powder coated Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors/other area)

Supplying at site Stainless steel tower bolt ,150 mm long

Supplying at site Stainless steel tower bolt ,200 mm long

Supply of Stain less steel screws suitable gauge, 25 mm in length

Supplying 12 mm dia 300 mm long stainless steel Aldrop with all fixtures.

Supplying & fixing flat iron hold fasts suitable to doors, windows ventilators etc. with necessary SS screws for fixing.

Providing & fixing 6 lever type best quality CP brass mortice lock with handle & duplicate keys to doors

Supplying and fixing to doors, bright finished automatic hydraulic door closer of approved brand and manufacturer , with all fixtures to suit the size of door shutters

Fixing doors, windows & ventilators in position including fixing hold fasts (Labour only)

Supplying stainless steel butt hinges 75 mm to department

Providing AC ridge capping with 7 mm or nearest size GI bolts & nuts and GI & bitumen washers, roofing compound etc. at all levels. (AC ridge will be supplied by the Company free of cost)

Supplying and fixing rolling shutters/ rolling grills of approved make and painted with two coats of chemical resistant enamel paint of approved quality and colour over two coats of zinc chromate primer, made of 80 x 1.25 mm MS laths inter locked together through their entire length and jointing together at the end by end locks mounted on a specially designed pipe shaft with brackets, side guide and arrangements for inside and outside locking arrangements with push and pull operation etc. complete.

Roofing/side cladding with AC corrugated/Semi corrugated sheets 6 mm thick with 7 mm or nearest av

ailable dia and suitable length GI Hooks/bolts and nuts,GI and bitumen washers , cutting sheets to required shape/length, providing a minimum overlap of 150 mm at ends including cost of AC sheets and all other materials, scaffolding charges etc complete at all heights.

Providing and laying with approved brand rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete.

Painting with synthetic enamel paint for each succeeding coat for woodwork/ ironwork including cost of all materials and labour.

Providing AC Corrugated/ semi corrugated ridge capping with 7 mm or nearest dia and suitable length GI hooks/bolts and nuts, GI and bitumen washers etc,providing required overlaps at ends including cost of all materials including ridge, scaffolding charges etc complete at all heights.

Replacing the damaged /corroded roofing bolts with new 8 mm dia GI bolts with nuts, GI & bitumen washers, necessary roofing compound etc. complete at all levels including painting the bolts, nuts & GI washers with one coat of epoxy primer before fixing- For bolts of J type (medium length)

Applying touch wood or equivalent two coats to wood work after sand papering and cleaning the surface well and applying wood filler at all heights

Painting letters or figures 2.50 cm, 4 cm, and 5 cm ht. Block, Roman, Italic or Indian with any kind of paint.

Painting letters or figures 6.50 cm, 8 cm & 10 cm ht. Block, Roman, Italic or Indian with any kind of paint

Painting letters or figures above 10 cm & up to 20 cm ht. Block, Roman, Italic or Indian with any kind of paint

Painting letters or figures above 20 cm up to 30 cm ht. Block, Roman, Italic or Indian with any kind of paint

Supplying to civil store GM wheel valves full way of size 15 mm

Supplying to civil store GM wheel valves full way of size 20 mm

Supplying to civil store good quality PVC Ball Valve, 15 mm size

Supplying to civil store good quality PVC Ball Valve - 20 mm size

Supplying to civil store good quality PVC Ball Valve - 25 mm size

Supplying to civil store good quality PVC Ball Valve - 32 mm size

Providing tar felt covering as per IS 1322 Type 3 Grade 1 over GI flashing, AC sheets etc. at all levels using shalicoat CF / T-30 or equivalent cleaning agent and sealing compound “Grade A” of ICI or equivalent as per deptl.instructions including cost of all materials, scaffolding charges, incidental charges etc. complete after removing the damaged tar felt covering wherever necessary.

Supplying to civil store good quality PVC Ball Valve - 50 mm size

Labour, Material and supervision charges for cleaning the surface using wire brush in order to remove all deleterious matters and cleaning with water jet spray (if required) including removing old worn out tar felt and applying water based primer / bituminous primer as suitable for the surface, providing and laying 4 mm thick “WP SHIELD APP” Polymer modified membrane with non woven polyester Matt-160 GSM, weight not less than 4 kg/Sq.m having softening point not less than 150 degree centigrade, longitudinal tensile strength not less than 650 N / 5cm tearing strength of 180 N ( P 4180 grade) by torch welding method including minimum 10 cm side and 150 mm end overlaps, finishing with solar reflective bituminous aluminum paint @ 0.10 Kg/Sq.m at all heights including scaffolding charges if required etc complete and as per special conditions of work (if any) /as directed by the Engineer-in-charge

Supplying to Civil store PVC pillar tap "Watertech" or equivalent quality,15 mm

Supplying to civil store good quality PVC Ball Valve - 40 mm size

Supplying to Civil store approved make 15 mm CP Pillar tap for wash basin

Supplying to Civil store approved make 15 mm PVC Connection with learning nut

Painting with one coat to old surface/ succeeding coat of external emulsion of approved quality and colour after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions

Supplying to Civil store 15 mm brass/CP bib taps of standard brand conforming to IS 781

Supplying to Civil store CP waste coupling suitable for wash basins/sink etc.

Supplying to Civil store 100 mm CP brass shower rose with 15 mm / 20 mm inlet and of approved brand / manufacturer

Supplying PVC shower rose with arm suitable for 15 mm / 20 mm connection of approved colour to department

Supplying to Civil store Wire nail of good quality

Supplying to Civil store 15 mm (1/2 inch) plastic taps “Haritha” or equivalent brand of approved quality

Providing and fixing GM ball valve with polythene float of superior quality and make - 15 mm or nearest bore connection.

Supplying to civil store white glazed vitreous Chinaware flat back lipped front urinals of size 430 x 380 x 230 mm or nearest size (Indian make best quality).

Supplying to Civil store Pad Lock 50 mm “Godrej Navatal “ with duplicate keys

Spray painting with red oxide metal primer one coat after preparing the surface by removing scales, rust, dust, etc. and applying metal putty wherever necessary and rubbing with emery paper without damage and covering the areas wherever necessary with cellulose paper, cleaning the waste from the site etc. including cost of materials, labour charges, scaffolding charges if required, hire for air compressor etc. as per deptl. instructions. (Electric power will be supplied by the Company free of cost).

Supplying to civil store white glazed Orisa pan of (Hindustan ,Cera or equivalent) 580x440mm size with P/S trap including all necessary specials,etc.

Supplying to civil store 250 x 130 x 50 mm white glazed porcelain foot rests of best quality.

Supplying to civil store duro- plastic seat cover with lid for European type water closet pan with CP brass hinges, rubber buffers etc.complete

Supplying to civil store PVC high level flushing cistern of 10 Ltr. Capacity of approved make and quality with all required arrangements viz, 1 No. 32 mm PVC flush pipe with learning nut, 1 No. 15 mm superior make 15 mm GM float valve & inlet connection etc.complete. (of make CERA,JOHNSON,KHAJARIA or equivalent)

Supplying to civil store PVC low level flushing cistern of 10 Ltr.capacity of approved make and quality with all required fittings such as 1 No. 32 m PVC flush pipe with learning nut, 1 No.15 mm flexible PVC connection, handle etc.complete (of make CERA,JOHNSON,KHAJARIA or equivalent).

Charges for fixing deptl. Orissa Pan/IWC / EWC pan, wash hand basin,Sink etc. (Supplied by the Compa

ny) with accessories, making good surface to the existing finished levels etc. as per deptl.instructions.

Supplying to civil store 32 mm dia PVC heavy-duty waste pipe 180 cm long/as required with learning nut for high-level flush.

Supplying to civil store 32 mm dia PVC heavy-duty waste pipe required with learning nut for Low-level flush.

Painting with synthetic enamel paint using approved quality paint as specified one coat (over a priming coat already done and paid separately) for wood work/iron work after cleaning the surface including cost of all materials and labour.

Supplying to civil store Float for PVC flush medium quality brand

Supplying good quality PVC solvent cement (½ Kg. Pack)

Supplying to Civil store Synthetic resin adhesive “ Fevicole SR 998 “ or equivalent for carpentry works.

Supplying to civil store 550 x 400 mm or nearest size wash hand basin of white glazed vitreous Chinaware (Indian make best quality “Neycer” / ”Cera” or equivalent), with rubber plug & 32 mm dia CP brass waste coupling.

Fabrication and erection of MS single section members such as monorails, channels, ground rail, MS angle handrails, verticals etc. with structures such as end stops, clamps, bolts and nuts etc. including charges for cutting, splicing, drilling holes as required, fixing to lines and levels and cleaning and painting with two coats of zinc chromate primer (One shop coat and one coat after fixing) and two coats of chemical resistant enamel paint of approved quality and colour over the primer etc. complete (Structural steel required for the work except for bolts and nuts, gas & electrodes will be supplied by the Company free of cost at our Stores)

Fabrication and erection of structural steel works bolted or welded as per drawings at all levels for trusses, ladders splices, frame work, base plates, HD bolts, purling, cleats, struts etc. including drilling, welding, cleaning the structural, erecting and painting with two coats of zinc chromate primer (one shop coat and one coat after erection) and two coats of chemical resistant enamel paint of approved quality and colour over the primer including supply of necessary MS bolts and nuts other than holding down bolts (Structural, gas & electrodes will be supplied free of cost by the Company)

Supplying and stacking at site hard granite broken stone 36 mm nominal sizes.

Supplying and stacking at site hard granite broken stone 18 mm nominal sizes.

Supplying and stacking at site good quality M-Sand for measurement.

Erection of fabricated structural (dismantled or serviceable) at all levels such as trusses, brackets etc. including conveying repairing if any by straightening, cutting, welding etc. and erecting to lines and levels as per deptl. instructions. (The fabricated structural, gas & electrodes will be supplied by the Company free of cost).

Providing JCB Excavator or similar equipment for the removal of earth, waste, debris etc.including equipment hire charges, fuel charges, and operator’s charges etc.complete.

Supplying and stacking at site hard granite soling stones of 75 to 150 mm cube or nearest size for measurement (15 % deduction will be made from stack measurement to arrive at the net quantity supplied)

Providing compressor with Jack hammer unit & other tools including equipment hire charges, fuel charges, and operator’s charges etc.complete for emergency works.

Supplying MS grills / MS gate (factory made) with Contractors own materials like steel, welding materials etc.including labour for fabrication, hire charges, conveying to places and fixing in position and cost of one coat shop primer.

Spray painting with synthetic enamel paint one coat/succeeding coat after cleaning the surface well and applying metal putty wherever necessary and rubbing with emery paper without damage and covering the areas wherever necessary with cellulose paper, cleaning the waste from the site etc. including cost of materials, labour charges, hire for air compressor etc. as per deptl. instructions. (Electric power will be supplied by the Company free of cost).

Supplying to Civil store 15 mm or nearest dia superior quality and approved make brass stop clock.

Cement block masonry work in CM 1:6 using good quality approved cement blocks including charges for conveying and as per departmental instructions for foundation and basement excluding cost of cement

Cement block masonry work in CM 1:6 using good quality, approved cement blocks including charges for conveying, scaffolding charges etc. as per departmental instructions for super structure walls up to 5 m height from ground level/floor level, excluding cost of cement

Supplying to civil store best quality European type vitreous chinaware white glazed water closet pan with P/S trap of “CERA”/ JOHNSON/ KHAJARIA or equivalent make

Providing back dumping truck (Tipper Lorry) for transporting earth, waste,debris etc including hire charges for truck, fuel charges and operator’s charges etc.complete (Min.8 Hrs per day).

Dismantling carefully and stacking 50 mm to 150 mm AC/SW pipes including all labour charges for dismantling, conveying & stacking the usable items in civil store as per deptl.instructions

Cement plastering with CM 1:4,12 mm thick and a neat cement flushing coat of cement and red oxide powder (red oxide@ 3.50 kg/50 kg of cement) for finishing smooth the concrete floor & trowelled smooth at all levels.

Providing Power Road Roller (Min.8 Te) including hire charges, fuel charges, and operator’s charges etc.complete (For 8 Hrs per day work)

Providing and laying vitrified floor tiles with approved brand and design tiles of size 600 x 600 mm or nearest available size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete

Supplying best quality marine ply wood of “Century “ brand or equivalent of IS 710, 4 mm thick

Supplying best quality marine ply wood of “Century “ brand or equivalent of IS 710,6 mm thick

Making and fixing single leaf /double leaf fully paneled door shutters, fully glazed Windows / Ventilator shutters/cup board shutters etc including all charges for fixing all hard wares but excluding cost of hard wares, using departmental wooden materials.

Supplying best quality Teak wood reapers 10 mm Sq.

Supplying first class and well-seasoned Anjili wood scantling in required dimensions.

Supplying 3 mm thick teak wood veneered marine ply wood of good quality, (OST)

Supplying 20 mm thick good quality thermocoal sheet

Supplying 12 mm thick good quality thermocoal sheet

Supplying best quality marine ply wood of “Century “ brand or equivalent of IS 710, 9 mm thick

Providing guard bars to windows & ventilators using suitable size M.S. rods using contractor’s own MS bars

Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site

Supplying 6 mm thic

k good quality thermocoal sheet

Ceiling with 12 mm thick best quality Anjili wood planks planed, lap jointed and screwed on to the under side of rafters and collars already provided with 40 mm or required size iron screws of suitable gauge etc complete as per instructions

Supplying at township civil store 640 x 510 mm or nearest size “Titan basin with Cardiff pedestal” wash hand basin of white glazed vitreous Chinaware (Indian make best quality “Parryware brand or equivalent)

Painting Road humps/dips, zebra lines & other masonry surfaces etc.to suitable shape as shown at site after cleaning the surface neatly, applying two coats of Synthetic enamel paint of suitable colour over two coats of white cement as base coat including cost of all materials, labour charges etc.complete

Painting letters or figures on existing carvings / projections in RCC/Masonry boards Block, Roman, Italic or Indian with any kind of paint for sizes - 2.50 to 5 cm height.

Painting letters or figures on existing carvings / projections in RCC/Masonry boards Block, Roman, Italic or Indian with any kind of paint for sizes- 5 cm to 10 cm height.

Painting letters or figures on existing carvings / projections in RCC/Masonry boards Block, Roman, Italic or Indian with any kind of paint for sizes- 10 cm & up to 20 cm height.

Supplying best quality exterior/interior wall Putty.

Painting letters or figures on existing carvings / projections in RCC/Masonry boards Block, Roman, Italic or Indian with any kind of paint for sizes- 20 cm up to 30 cm ht.

Supplying and fixing to suit door frames mosquito proof net using powder coated Aluminium frame with steel net (SS 316) including handles and locking arrangement.

Supplying and fixing to suit window frames mosquito proof net using powder coated Aluminium frame with stainless steel net including locking arrangement.

Supply good quality PVC Angle cock Supreme or equivalent brand at site

Best quality marine ply wood of “Century “ brand or equivalent of IS 710, 12 mm thick

FACT Service Activity Code

Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete.

Supplying mosquito proof net “Netlon Polynex Screen” 1200 mm or nearest width of suitable colour

Supplying wall mixer "CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying Long body bib cock of standard range CERA/JOHNSON or equivalent type

Supplying Basin Mixer without pop up "CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying Swan neck pillar cock "CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying Concealed Stop cock ½ inch "CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying Concealed Stop cock ¾ inch "CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying “Jaguar” brand 1½ inch (40 mm) concealed flush valve or “ Parry ware” (T 3302 A1) to suit the existing one.

Supplying Open type flush valve of “ Parry ware” (T 3301 A1) or equivalent brand

Supplying ¾ inch CPVC pipe for hot water connection

Supplying ¾-½ inch CPVC brass elbow for concealed connection

Supplying and fixing Long body PVC tap of ' 'water tech ' make with wall flange

Supplying ¾-½ inch CPVC brass reducer for concealed connection

Supplying Stop cock male/female end of standard range,15/20 mm (CERA,JOHNSON or equivalent)

Supplying ¾-½ inch CPVC reducer for concealed connect

Supplying ¾ inch CPVC elbow for concealed connection

Supplying CPVC solvent for hot water lines, 50 ml pack

Chipping & removing portions of existing RCC works carefully without damaging the remaining structure & removing the debris as per directions within a distance of 150 m.

Applying one coat/ succeeding coat of floor paint “Florolac” or equivalent approved quality and colour, to floors after thoroughly cleaning the surface from dust, dirt etc as per departmental instructions

Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc.

Supplying and fixing best quality soap dish of Jaguar or equivalent make including cost of screws etc. complete

Supply at site Ordinary Portland Cement (OPC) 53 Grade as per IS 269-2019 in 50 Kg Bags (In multi wall paper sacks)

Supplying, fabricating, and fixing reinforcement to RCC works at all levels with High strength deformed TMT bars of Fe 500 grade conforming to IS 1786 including all charges for uncoiling and straightening rods, cutting rods, bending cold, placing in position and tying with black annealed steel wire of 16 SWG , etc. complete.INCLUDING COST OF STEEL (The reinforcement steel shall be of M/s. RINL/SAIL/TISCO)

Supplying, Conveying, fabrication and erection of structural steel work bolted or welded at all levels as per scope drawing for trusses, purlins, louver brackets, louver runners bracings, stair cases, platforms, hand rails ladder, threaded sag rods, splices, etc. with M.S angles, channels, tees, flats, RSJs, rods, pipes and plates including cutting, welding, cleaning, erecting and painting with two coats of zinc chromate primer (one shop coat and one coat after erection) and two coats of chemical resistant enamel paint of approved quality and colour over the primer including supply of necessary MS bolts and nuts other than holding down bolts.(The structural steel material shall be of M/s. SAIL / RINL / TISCO /JINDAL make) - Required gas and electrodes will be supplied free of cost by FACT at stores

Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Providing and fixing false ceiling with 6 mm or nearest thick PVC hollow profile of Syntex or equivalent of approved shade using suitable aluminium angle & tee sections (25x25x1 mm angle section and 50x25x1 mm Tee section) and SS hangers of suitable guage etc complete as per instructions

Providing and fixing SS door handle 150 mm with SS screws etc. complete

Supplying and laying Wet mix macadam as per MORTH section 406 and consolidating with power rollar 8-10 capacity to lines and levels after clearing the potholes/ undulations if any as per depatmental instructions

Supplying to Civil store Synthetic resin adhesive " Fevicole SH " or equivalent for carpentry works in containers of 500g.

Supplying to civil store rack bolt of suitable size for fixing wash basin

Supplying to civil store wood cutter blade of Bosch or equivalent for carpentry works in all areas.

Supplying to civil store sanding disc for carpentry works in all areas.

Supplying to civil store saddle/ clamp of any required size for plumbing works.

Supplying to civil store PVC aldrop with all necessary fittings.

Supply, fabrication and fixing of steel structures made with M.S. hollow tubular sections of TATA /JINDAL of different sections with insert plates,legs etc. and blinding the hollow tubes with MS plates etc. at all heights with necessary welding ,scaffoldiing and painting with two coats of zinc chromate yellow metal primer and two coats of synthetic enamel paint with all labour and material charges etc. complete