Urgent special repairs to Taluk supply office ,Ranny

Amount

Taluk supply office ,Ranny

od73323/2018_2019 : Providing and fixing Cubicles with 12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination of height 90 cm and 5.5 mm glass of height 30 cm fixed in 75 x 50 mm powder coated Aluminium frame fixed in floor etc complete as per the directons of departmental officers. <br>The specifications of materials to be used for this work are as noted : <br>a) Aluminium T or L Sections with Powder coating of 50 microns (b) Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick (c) Float glass sheet of nominlal thickness 5.5 mm (of weight not less than 13.50 Kg/ sqm) (d) Neoprene / EPDM rubber gasket and sundries .<br>The minimum quantities of each material to be used for this work should be as noted below :-<br>Details of materials required for 1.85x1.35=2.5sqm<br>1)Aluminium Sections- powder coated<br>External member of the frame (Jindal sections no 4605)<br>V = 2x1.35 = 2.7 m<br>H = 3x1.85 = 5.55 m<br>total= 8.25 m @ 1.653 kg/m = 13.64 kg<br>(ii) snap beading (Jindal section no 4407)<br>2 x 4 x 1.85 =14.8 ,2 x 2 x 1.35 = 5.4<br>total 20.2 m @ 0.176 kg/m =3.56 kg<br>iii) Angle cleat 38x38x4.8 mm 50 mm long<br>6x0.05 = 0.30 m @ 0.985 kg/m = 0.30 kg<br>Sub total = 17.50 kg<br>Add 5% wastage = 0.88 kg<br>Total = 18.38 kg <br>2) Prelaminated sheet 1.85x.9=1.67m2<br>Add 5% wastage = 0.08 m2<br>Total = 1.75 m2<br>3) Glass 5.5mm thick 1.85x0.3=0.56m2<br>Add 5% wastage = 0.03 m2<br>Total = 0.59 m2<br>4) Neoprene / EPDM rubber gasket - 4.51 metres etc<br><br>

od74160/2018_2019 : Providing and fixing counter made with 25mm thick teak wood top,rear side,vertical and horizontal partitions with 18mm teak wood planks inserted on 75x50mm teak wood frame etc completed.

od74161/2018_2019 : Supplying and fixing Key Board stand with steel channel including cost, conveyance,labour charges and other fittings etc complete.

od77206/2018_2019 : Supplying and fixing Table Board stand with steel channel including cost, conveyance,labour charges and other fittings etc complet

od73326/2018_2019 : Supplying ,fabricating,and errecting aluminium shelf using 63.50x38.10x2.0mm aluminium section for horizontal,vertical , and 100x50x1.20mm as bottom horizontal, 12mm thick PL Board,glazing clip,rubber beeding,screws and locking arrangement including all cost and conveyance,labour charges etc.complete.

od73327/2018_2019 : supplying and fixing venition blind to suit the window and other openings including all necessary fittings and labour charges etc. complete

od73330/2018_2019 : Supplying fabricating partition wall using aluminium alloy extrusion as per is 733 1983 and IS 1285 1975 of indel make with outer frames of size 63.50x38x1.2mm(section 9223 weighing 1.127kg/m)for vertical horizontal,top and bottom including glazing clip19.7x17.6x90section 4682 weighing 169kg/m)rubber beeding 12 mm thick PL board for bottom and 5.5mm thick plain glass for top of partition necessary screws including cost and conveyance of all materials labour charges etc complete.as per the direction of departmental officers at site.

od73331/2018_2019 : Supplying ,fabricating,fixing in position aluminium door shutter of size 1.00x2.05 with aluminium section of size 95.25x44.45,25.00x1.70mm as bottom and top frame with 47.62x44.45x1.40mm and verticals with 50.00x44.50x1.90mm and middle with 49.81x44.45x2.00mm and 12mm thick PL Board at bottom and top with 5.50mm thick plain glass,glazing clip,rubber beading brass pivot,necessary locking arangement,automatic door closer,screws including all cost,conveyance,labour charges etc.complete.

10.29.1 : Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

VINEED KUMAR CJ

Bidder Name

VINEED KUMAR CJ

GEORGE VARGHESE