Repair of boundary wall and repair renovation of PHE Mechanical Sub Division Complex Nowshera under Capex Budget

Amount

Demolishing brick work manually/by meachanical means including stacking of serviceable material and disposal of unserviceable material within 50mtr lead: In cement mortar.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead in 1:3:6 or richer mix.

Demolishing stone rubble masnory manually/by mechanical menas including stacking of serviceable material and disposal of unserviceable material within 50mtr lead: In cement mortar.

Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5m depth, 1.5m in width as well as 10Sqm including disposal of excauated earth upto 1mtr from cutting edge, disposed earth to be levelled and neatly dressed in: All kind of soils.

Providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:4:8 (1 Cement: 4 Coarse sand: 8 graded crused stone aggregate 40mm nominal size.

providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:3:6 (1 Cement: 3 Coarse sand: 6 graded crused stone aggregate 20mm nominal size.

Supplying of stone/boulder (nallah) nominal size 225mm (stack measurement reduced by 20%),

Dumping stone excluding cost of stones. In horizontal on level.

Half brick masnory with bricks of class designation 75 in foundation and plinth in: cement mortar 1:4 (1 cement: 4 coarse sand:)

Extra for half brick masnory in superstructure above plinth level upto floor V level.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 Cement: 6 Coarse sand).

Extra for brick work in superstructure above plinth level upto floor V level (by manual means).

RCC work in walls (any thickness) including attached pilasters buttresses, plinth and string coarse, fillets, coloumns, pillars, pipers, abutments, posts and struts, etc upto floor five level excluding cost of centring, shuttering, finished and reinforcement 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size)

Random rubble masnory with hard stone from nallah in foundation in plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth with cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for random rubble masnory with hard stone in super structure above plinth level and upto floor level, incl. levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.50mm nominal size) Crushed.

Reinforced cement conc. Work in beams suspended floors, roofs, having slope upto 15 landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staireases and spiral staircases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 Cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size)

Reinforcement for RCC works including straightening cutting, bending, placing, in position and binding all complete. Cold twisted bars.

Providing & fixing of 1mm thick M.S. Steel door with frame of 40X40X6mm angle iron & 3mm M.S. gusset plates at the junctions & corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.

12mm thick cement plaster of mix in 1:4 (1 Cement: 4 Coarse sand)

Distempering with oil bound washable distemper for approved brand and manufecturing to give an even shade. Old wrok one or more coat.

Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade: old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat and primer applied @ 0.80 litrs/10sqm complete.

Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade. New work (two or more coats) applied @ 3.84 Kg/10 Sqm.

Painting with synthetic enamel paint of approved brand and manufacturing of required colour to give an even shade: one or more coats on old work (Steel work).

Providing and fixing white vitreous China pedestar type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flishing system including flush pipe with manually controlled device with all fitting and fixtures, complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows: Kail wood II

Painting with synthetic enamel paint of approved brand and manufacturing to give an even shade. Two or more coat on new work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size of tile 60x60cm.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Oval shape 450x350mm (Outer dimensions).

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 15mm dia nominal bore.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (10 litre capacity)

Providing and fixing C.P.brass bib cock of approved quality confirming to IS : 8931 (15mm nominal bore).

Providing and fixing C.P.brass long nose bib cock of approved quality confirming to IS standards and weighting not less than 810 gms.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make confirming ti IS : 8931 (15mm nominal bore)

Providing and fixing brass bib cock of approved quality. (15mm nominal bore)

Providing and fixing ball valve (brass) of approved quality complete. (15mm nominal bore)

Providing and fixing uplasticised PVC connection pipe with brass unions. 45cm length (15mm nominal bore)

Providing and fixing PTMT grating of approved quality and colour circular type (100mm nominal dia)

Providing and fixing PTMP extension nipple for water tank pipe, fittings of approved quality colour 15mm nominal size, with dimensions 67x40x40mm weighing not less than 38gms.

Providing and fixing of jet on W.C. (L.S)

Providing and fixing of 80mm nominal bore PVC pipe L.S.

Providing and fixing of 110mm nominal bore PVC pipe L.S.

Providing and fixing 80mm bend/door bend (PVC) L.S.

Providing and fixing 110mm bend/door bend (PVC) L.S.

Providing and fixing flow trap (L.S)

Re fixing of 1000litre capacity water tank after repair L.S.

Providing and fixing of electric board, switches, wiring Main switch etc. complete electric fitting of main room, Kitchen bathroom including outside lights etc. (Lum Sum)

Fixing/repair of iron gate incl. weldings, priming coat and providing/fixing of 4 No hold fast all complete job (Lum Sum).

Centring and shuttering including strutting, propping etc. and removal of form for:- a) Foundations. Footing, bases of columns etc. for mass concrete.

b) Suspended floor, roofs, landings, balconies and access plateform.

c) Edges of slabs and breaks in floor and walls

Carriage of materials from nearest source to site of work including loading/unloading and stacking complete in all terrains a) Sand 5Km (Five Km) from nearest source to road side of work by M.T. & 100mtr (One hundred mtr) from road side to site of work by H.L.

b) Stone aggregate below 40mm 5Km (Five Km) from nearest source to road side of work by M.T. & 100mtr (One hundred mtr) from road side to site of work by H.L.

c) Stone aggregate 40mm & above 5Km (Five Km) from nearest source to road side of work by M.T. & 100mtr (One hundred mtr) from road side to site of work by H.L.

d) Stone 5Km (Five Km) from nearest source to road side of work by M.T. & 100mtr (One hundred mtr) from road side to site of work by H.L.

e) Steel 1000mtr (One thousand mtr) from Divisional store to site of work by H.L.

f) Brick 5Km (Five Km) from nearest Kiln to road side of work by M.T. & 100mtr (One hundred mtr) from road side to site of work by H.L.

Prithvi Pal Gujral

MOHD RAFIQ

VIKAS SHARMA

Ravi Kant