Kozhikode Branch of Kerala Bank Interior Electrical and Air Condition Work

Amount

Interior Works:-

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

Toughened Glass Door:120CM Providing and fixing door of 12mm thick Toughened glass door (Saint Gobain) with dorma kaba BTS 75 120kg patch fittings (Floor Spring, Top patch, pivot Pin, Bottom patch) dorma Center lock and handle 24".Including all cost and conveyance of materials, labour, etc complete.

Toughened Glass Door:90CM Providing and fixing door of 12mm thick Toughened glass door (Saint Gobain) with dorma Aido XLC 4000 patch fittings (Floor Spring, Top patch, pivot Pin, Bottom patch) dorma Center lock and handle 24".Including all cost and conveyance of materials, labour, etc complete.

12mm Toughened Glass Partition with plywood frame : Providing and fixing 12mm thick Toughened glass(Saint Gobain) Partition System (upto a height of 300cm ) with 12mm ply and 1mm lamination as per design intent.Including all cost and conveyance of materials, labour etc complete.

Etching Sticker Work: Providing and fixing Etching Sticker as per design intent using suitable adhesive as per manufacture's Specification.Including all cost and conveyance of materials, labour etc complete.

Providing partition wall 80mm/100mm thick using plywood of thickness 12 mm double layer, with a plywood core.Finished with 1mm white or theme lamination on both sides. No quantity is measured in running meter and Quantity is measured only for partitions below the false ceiling.Including cost and conveyance of all materials labour charges etc. complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built-up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom, and sides with required EPDM rubber/ neoprene gasket, etc. Aluminium sections shall be smooth, rust-free, straight, mitered, and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge. (Glazing, paneling, and dash fasteners to be paid for separately)For the fixed portion, MATERIAL (i) External member of the frame (Jindal section no 4605) (ii)Internal member of the frame (Jindal section no 4604) (iii)Aluminium snap beading on both sides (Jindal section no 4407) (iv)Angle cleat 38x38x4.8mm, (v)C.P. brass/stainless steel screws 20 mm for cleat angle (vi)Chromium plated Brass screws 20 mm (vii)Polyester powder coating 50 microns on aluminium sections

Supplying and fixing 4mm ACP in existing aluminium frame work, as per the specifications and drawing. including cost and conveyance of all materials labour charges etc. complete.

Supplying and fixing flush doors with 32mm block board and 6mm glass as per design and specification finished with 1.00 mm lamination on both sides, the width of the door 75cm/90cm. Use ISI. S.S 304 hardware fittings including locks, handles, hinges, stoppers, door closer, etc. Including cost and conveyance of all materials labour charges etc. complete.

Cladding over the pillars, and solid walls using 12mm PVC board of 0.6 density and finished with 1mm lamination, as per the specifications and drawing. including cost and conveyance of all materials labour charges etc. complete.

Supplying and fixing plywood shelves 45 CM WIDTH provide, hinges, and 8" concealed handles with multi-lock using 19mm block board for the door. Finished with 1mm lamination on both sides. Shelves using 19mm plywood and 12mm PVC board of 0.6 density for the backside. Finished with 0.8mm lamination for the inner sides and 1mm lamination for the outer sides. Quantity is measured only below the false ceiling. Drawings &specifications are given along with. including cost and conveyance of all materials labour charges etc. complete.

Making a cash counter unit with Framed in 80mm and 100mm thick partition wall including all sides of cash counter as per drawing made in 12mm double layer, with a plywood core and provides 12mm toughened glass beveled and polished for the front and sides, fixed to the side partition of the counter as per design Provide keyboard tray, cable manager, CPU stand, leg stand, fixed in SS 304 - hardware fittings including locks, tower bolt, and handles. Provide currency reader near cash chest with glass in tabletop and light point with LED bulb, cash drawers, and shuttered cabinets with locks and handles for the counter and 19mm Nano white granite for countertop with side polished. . Finished with 1mm wooden and white lamination on the outer side, and 0.8mm lamination on the inside. An etching sticker should be provided for the glass area as specified. Including cost and conveyance of all materials labour charges etc. complete.

Making table for tellers,manager,assistant brancg manager,auditor,area manager,inspector etc, as per design and provide 19mm Nanowhite granite for countertop with side polished. The counter is framed using 19mm- marine ply with a drawer,shelf, keyboard tray , cable manager , CPU stand , leg stands using 12mm plywood, lock,handil,hinges, etc are constructed as per design. Finished with 1mm wooden and white lamination on outer side and 0.8mm on the inside. including cost and conveyance of all materials labour charges etc. complete.

Making side credenza 80x40x60CMs using 19mm and 12mm-ply wood Finished with 1mm wooden and white lamination -on the outer sides and 0.8 mm lamination -on the inner sides. Provide locks and handles for drawers and shutters as per design. Including cost and conveyance of all materials labour charges etc. complete.

Making side credenza 100x40x60CMs using 19mm and 12mm-ply wood Finished with 1mm wooden and white lamination -on the outer sides and 0.8 mm lamination -on the inner sides. Provide locks and handles for drawers and shutters as per design. Including cost and conveyance of all materials labour charges etc. complete.

Making a paper desk for the customers 60x35x120cms in dimension dimension with a 19mm nano white for the tabletop. All faces of the table using 12 mm plywood, finished with 1mm lamination. Including cost and conveyance of all materials labour charges etc. complete.

Making a pantry table unit using 19 mm- plywood and using SS hardware fittings such as handles, multi-locks, and autoclose hinges for cabinet shutters, etc..Finished with 1mm lamination on the outer side and 0.8mm on the inside. Provide beveled and polished granite for the countertop (Galaxy -granite slab 19 mm - thick )(area taken for granite area of the table). including cost and conveyance of all materials labour charges etc. complete. quantity of the unit is measured as per the area of the granite top provided.

Supplying and fixing zebra blinds self-designed or textured of standard quality (approximate cost (total work)160/sqft). Including cost and conveyance of all materials labour charges etc. complete .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Finishing walls with textured exterior paint of required shade

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

Supplying and fitting ready made pin-up notice board(120x90)cms with aluminium frame and velvet core including cost of materials, fitting charges etc. complete

Supplying and fitting 8mm thick glass with vinyle sticker wall logo board(120x60)cms fixing to wall or partition using by ss studs. including cost of materials, fitting charges etc. complete

ELECTRICAL WORKS: Light Points :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group A

Group B

Group C

LIGHT FITTINGS

Supply and fixing of SQUARE/ROUND–15W-LED lights on ceiling wherever designed by Electrical Engineers and equal distribution of light bands for standard Candle Power and keeping distance.including cost and conveyance of all materials labour charges etc. complete.

Supply and fixing of SQUARE/ROUND–15W- SURFACE LED lights on ceiling wherever designed by Electrical Engineers and equal distribution of light bands for standard Candle Power and keeping distance. including cost and conveyance of all materials labour charges etc. complete.

Supply and fixing of led TUBE lights 4' on ceiling/wall where ever designed by Electrical Engineers and equal distribution of lights bands for standard Candle Power and keeping distance .including cost and conveyance of all materials labour charges etc.

Supply and fixing of fancy LED strips under ceiling down designs including suitable adapter and other fittings.including cost and conveyance of all materials labour charges etc. complete.complete.

FAN POINTS : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

GROUP C

Supply, installing, testing and commisioning of 400 mm sweep, 70 CMM wall mounted fan with 70° oscillation & adjustable wind direction, 3 step speed control, grill over blades for protection complete etc with all accessories including wiring the fan from existing plug point etc.,as required.

Supply, installation, testing and commissioning of following size exhaust fan with metallic blades, ISI marked in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing, commissioning & earthing etc. as required. 230 mm sweep, 900 rpm, 850 CMH

Supply and fixing telephone points up to 5 pairs wherever designed by the Electrical Engineer and installing the independent specific sockets (jack). including cost and conveyance of all materials labour charges, etc. complete.

Supply and fixing lan cabling point up to 5 pairs wherever designed by the Electrical Engineer and installing the independent specific RJ45 sockets (IO) including cost and conveyance of all materials labour charges, etc. complete.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc.as required.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc.as required.

Supply and installing of 20A -DP switch with indepented switchboard including cost and conveyance of all materials labour charges etc. complete.

Circuits :- Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Earthings :-

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Drawing of bare copper line clamping of swg crimplings etc per meters including necessary conduit pvc pipes, elbow cost and conveyance of all materials labour charges etc. complete.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

ISOLATORS :-

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Supplying and fixing following rating, triple pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning 40 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. As required. 40 amps

Supply , fixng and commisioning of L&T make 63A CUBICLE type Change over switch with encloser for generator.including cost and conveyance of all materials labour charges etc.complete.

Erecting Switch gear rating panel board at designed locations at specific height so as to giving terminations of incoming and out going conncetions/ terminations through the isolators as per design colour code and load sharing and giving connections in the interior wiring with pilot lamps/3 nos 63A handle type fuse/busbar/ameeters/voltmeter freqiency meter and if ncesssary including rigid earth termiantion through the leadeportion of green colourd earth strip etc complete up to 25KW including cost of matarils. etc. complete.

Distribution boxes : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

4 way (4 + 12), Double door

8 way (4 + 24), Double door

12 way (4 + 36), Double door

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. 63amps TPN

LAN DATA CABLING :-

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and laying telephone cabling using 2 pairs of fusible cables for linking all tables as per interior design. Including necessary conduit PVC pipes, elbow, junction box, cost and conveyance of all materials labour charges, etc. complete.

Laying UG cable Armoured copper of size designed by the electrical consultant, neatly tying/clamping at the cable tray/ underground with/without sleeve as per the direction of the electrical supervisor at the site, etc complete with the end termination of cable.including necessary conduit pvc pipes, elbow, cost and conveyance of all materials labour charges, etc. complete. (Havells / Gloster) 4 core x25sq mm per meter

Supply and fixing metal clad socket for the additional load coming points. .including cost and conveyance of all materials labour charges etc. complete.

SECURITY SYSTEMS :-

VENUS -8 Zone control panel with onboard keypad and inbuilt 2 message 30 Number Speech Dialer,fire PCB. Input Power supply. The control panel and 12 V7 Ah Battery are also included .complete.including the cost and conveyance of all materials labour charges etc. complete. Model :- Securico, SEC- 04V

QUAD P.I.R MOTION SENSER - Digital quar Technology PIR Motion Sensor with intelligent pet immunity.Detection Range 12m, Multi Angle wall bracket ABS Housing complete with cost of all materials and labour charges etc complete. Model :- Securico, SEC-QPIR

Supplying and fixing of Digital Multifunction detector (Vibration Sensor)

Supplying and fixing of photo electric smoke detector

PANIC SWITCH - Micro switch technology ,in-built tamper switch sturdy ABS Housing with brushed stainless steel finish cover plate . complete with cost of all materials and labour charges etc complete . Model :- Securico, SEC-PS

HEAVY DUTY SHUTTER CONTACT-Extra sturdy Glass filled nylon housing, 4 wires (2 Tamper wires, 2 zone wires), Contact rating 10W, Min.Opening gap 35-40mm Unique design, complete with cost of all materials and labour charges, etc complete. Model:- Securico, SEC-SC

Hooter/SOUNDER 12V - High power 130 db, Police siren sound,White ABS Housing .complete with cost of all materials and labour chargesetc complete .

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/PVC conduit as required

2x1.5 sq.mm

4x1.5 sq.mm

MUSIC SYSTEMS :-

Music system using AHUJA brand Amplifier of DPA-570 AND PROVIDE 6 ceiling speakers of CS-6081T with 1 nos Speaker volume Control and with wiring .including necessary conduit PVC pipes, elbow, junction box cost and conveyance of all materials labour charges, etc. complete.

AIR CONDITIONER_HIGH SIDE ( MACHINES ) :-

Supply ,installation ,testing and commissioning of Split type 1.0 TR [ inverter type ]5 star air conditioner with stabiliser 4KVA(V-GARD),outdoor stand include all material and labour charges etc.. Complete

Supply ,installation ,testing and commissioning of Split type1.5 TR [ inverter type ] air conditioner 5 star with stabiliser 4KVA(V-GARD) and outdoor unit stand. including and all material and labour charges etc.. Complete

Supply ,installation ,testing and commissioning of Split type2 TR [ inverter type ] air conditioner 5 star with stabiliser 4KVA(V-GARD) and outdoor unit stand. including and all material and labour charges etc.. Complete

SITC of Refrigerant piping (Suction & Discharge ) Hard drawn from sofit copper tube of suitable sizes, withcopper elbows,tees etc. as required

Supplying and providing copper piping (Mandev/Mexflow) with insulation (Kflex) and Communication Cable for SPLIT air conditions .including cost and conveyance of all materials labour charges etc. complete.

Supplying and providing sufficient drain piping through the wall in a concealed manner includes cutting and re plastering also .including cost and conveyance of all materials labour charges etc. complete.

HARIDAS A A (BID ID -2221218)

CREATIVE ENTERPRISES (BID ID -2221731)