Construction of New Rest House At Visnagar T.A.: Visnagar Dist. Mehsana

BILL OF QUANTITY

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Excavation for foundation up to 1.5 m depth including sorting out and stacking of

one hundred twenty

1 1104.37 useful materials and disposing off the excavated stuff up to 50 Meter lead.(A) 122.99 CMT

Loose or soft soil

Excavation for foundation up to 1.5 m depth including sorting out and stacking of

one hundred thirty

2 305.00 useful materials and disposing off the excavated stuff up to 50 Meter lead.(A) 136.33 CMT

Loose or soft soil

Excavation for foundation up to 1.5 m to 3.00 mt depth including sorting out and

two hundred sixty

3 181.00 stacking of useful materials and disposing off the excavated stuff up to 50 Meter 269.75 CMT

lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

one hundred thirty

4 1111.24 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 136.92 CMT

deposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidation three hundred

and dressing etc. complete. ninety nine

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As

6 910.00 Per 6131 _paret-II Consentration Weight one percent is recommended i.e one 86.82 eighty six SMT

litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Providing and laying controlled cement concrete M.150 for curing complete three thousand

7 67.00 excluding cost of formwork and reinforcement for reinforced concrete work in (A) 3788.24 seven hundfred CMT

Foundations, footings,Base of columns and Mass concrete eighty eight

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand

two thousand nine

8 140.00 broken stone aggregates 40 mmnominal size) and curing complete excluding 2968.91 CMT

hundred sixty eight

cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M-250 with curing complete,

including the cost of formwork but excluding the cost of reinforcement for four thousand four

reinforced concrete work in Foundation footing base of columns and mass hundred fourty eight

concrete. (For any size)

Providing and laying controlled cement concrete M-250 and finishing smooth with

seven thousand two

10 59.00 cuing etc. complete including the cost of formwork but excluding the cost of 7236.94 CMT

hundred thirty six

reinforcement for reinforced concrete work in columns up to plinth level.

Providing and laying controlled cement concrete M-250 and curing complete

five thousand eight

11 88.00 including the cost of formwork but excluding the cost of reinforcement for RCC 5833.77 CMT

hundred thirty three

work in Ground beam and Plinth Beam.

Providing and laying controlled cement concrete M-250 and curing complete

four thousand five

12 100.30 including the cost of formwork but excluding the cost of reinforcement for RCC 4537.11 CMT

hundred thirty seven

work in Grade slab.

six thousand two

Providing and laying controlled cement concrete M-250 curing complete including

13 20.00 6277.08 hundred seventy CMT

cost of Formwork but including cost of reinforcement for wall caps/coping.

Providing and laying controlled cement concrete M.200 and curing complete

seven thousand six

14 45.76 including the cost of formwork but excluding the cost of reinforcement for 7675.10 CMT

hundred seventy five

reinforced concrete work in Columns, Pillars posts and struts at Ground floor.

Providing and laying controlled cement concrete M.200 and curing complete seven thousand

15 10.00 including the cost of formwork but excluding the cost of reinforcement for 7714.51 seven hundred CMT

reinforced concrete work in Columns, Pillars posts and struts at First floor. fourteen

Providing and laying controlled cement concrete M.200 and curing complete

six thousand two

16 78.00 including the cost of formwork but excluding the cost of reinforcement for 6238.22 CMT

hundred thirty eight

reinforced concrete work in Beam at Ground floor. Building Work

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and laying controlled cement concrete M.200 and curing complete six thousand two

17 3.00 including the cost of formwork but excluding the cost of reinforcement for 6277.63 hundred seventy CMT

reinforced concrete work in Beam at First floor. seven

Providing and laying controlled cement concrete M.200 and curing complete

six thousand one

18 130.00 including the cost of formwork but excluding the cost of reinforcement for 6186.17 CMT

hundred eighty six

reinforced concrete work in Slab at Ground floor.

Providing and laying controlled cement concrete M.200 and curing complete

six thousand two

19 5.00 including the cost of formwork but excluding the cost of reinforcement for 6225.58 CMT

hundred twenty five

reinforced concrete work in Slab at First floor.

Providing and laying controlled cement concrete M.200 and curing complete seven thousand five

20 16.00 including the cost of formwork but excluding the cost of reinforcement for 7523.75 hundred twenty CMT

reinforced concrete work in Lintel at Ground floor. three

Providing and laying controlled cement concrete M.200 and curing complete

seven thousand five

21 1.00 including the cost of formwork but excluding the cost of reinforcement for 7563.16 CMT

hundred sixty three

reinforced concrete work in Lintel at First floor.

Providing and laying controlled cement concrete M.200 and curing complete

six thousand five

22 5.00 including the cost of formwork but excluding the cost of reinforcement for 6593.27 CMT

hundred ninty three

reinforced concrete work in Staircase at Ground floor.

Providing and laying controlled cement concrete M.200 and curing complete

six thousand four

23 4.00 including the cost of formwork but excluding the cost of reinforcement for 6436.75 CMT

hundred thirty six

reinforced concrete work in Chhajja at Ground floor.

Providing and laying controlled cement concrete M.200 and curing complete

six thousand four

24 1.00 including the cost of formwork but excluding the cost of reinforcement for 6476.16 CMT

hundred seventy six

reinforced concrete work in Chhajja at First floor.

Providing and laying controlled cement concrete M.250 and curing complete seven thousand

25 9.00 including the cost of formwork but excluding the cost of reinforcement for 7933.60 nine hundred thirty CMT

reinforced concrete work in Vertical wall (Pardi) at Foundation. three

Providing and laying controlled cement concrete M.150 for curing complete

four thousand seven

26 13.00 including cost of formwork but excluding the cost of reinforcement for reinforced 4728.12 CMT

hundred twenty eight

concrete work in columns at First floor (Dummy column).

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

27 99000.00 77.81 sevnty seven KG

binding and placing in position complete upto all floor level.

Brick work using common burnt clay building bricks having crushing strength not

three thousand four

28 115.80 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- 3424.52 CMT

hundred twenty four

Cement : 6 fine sand) (b) Conventional

Brick work using common burnt clay building bricks having crushing strength not

29 240.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- 3706.17 CMT

seven hundred six

Cement : 6 fine sand) (b) Conventional (Ground Floor)

Brick work using common burnt clay building bricks having crushing strength not three thousand

30 80.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- 3740.39 seven hundred CMT

Cement : 6 fine sand) (b) Conventional ( First Floor ) fourty

Brick work using common burnt clay building bricks having crushing strength not three thousand

31 2.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- 3774.61 seven hundred CMT

Cement : 6 fine sand) (b) Conventional (Second Floor ) sevnty four

Half brick masonry in common brunt clay building bricks having crushing

32 220.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 590.24 five hundred ninty SMT

sand ) in foundation and plinth (B) Conventional ( Ground Floor )

Half brick masonry in common brunt clay building bricks having crushing

five hundred ninty

33 90.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 595.60 SMT

sand ) in foundation and plinth (B) Conventional ( First Floor )

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

one hundred thirty

34 750.00 interior plastering upto floor two level and finished even and smooth in (i)Cement 138.70 SMT

mortar 1:3 (1-cement:3-sand). Ground Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

one hundred sixty

35 26.00 interior plastering upto floor two level and finished even and smooth in (i)Cement 165.77 SMT

mortar 1:3 (1-cement:3-sand). First Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

one hundred sixty

36 2290.00 single or half brick walls for interior plastering upto floor two level and finished 165.31 SMT

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

one hundred eighty

37 72.00 single or half brick walls for interior plastering upto floor two level and finished 189.25 SMT

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) First floor

Qty. Description Rate Unit Amount

1 2 3 In Words 5

20mm thick sand faced cement plaster on walls upto height 10 metres above

38 2136.00 ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- 321.10 SMT

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing and fixing 24 gauge - GI chicken wire mesh (PLASTER MESH OF

AMAX INTERNATIONAL) at the junction of masonry work and RCC work or on

two hundred eighty

39 114.00 any other place as directed to receive plaster including fixing with galvanized 288.87 SMT

nails, raw plugs at all heights plinth level- including scaffolding etc complete as

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1 :1

40 56.00 including neat cement finishing watering etc. complete as per architect 24.28 twenty four RMT

41 77.00 Providing throating or plaster drip and moulding to R.C.C. Chhajja.or grove plaster 43.05 fourty three RMT

Finishing wall with water base primer (one coat) and weather proof exterior

emulsion paint on wall surface (two coats) to give an required shape even

42 2533.50 108.05 one hundred eight SMT

shade after thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

one hundred twenty

43 2400.00 papered smooth and painting (two coats) with plastic emulsion paint of 125.52 SMT

approved brand and manufacture on wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new ceilings and sloping roof surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth and Wall painting (two coats) with one hundred thirty

plastic emulsion paint of approved brand and manufacture on ceilings and one

sloping roof surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand papered

Charges for making holes in brick walls / RCC with or without plaster / tiles with

mechanical cutter like HILTI etc. Including disposing the debris and finishing the

same as per requirements. Measurement of holes will be taken per no. of holes one thousand fourty

drilled as per following range of diameters. Making of holes by hammer and five

chisel will not be considered in this item. For Diameter of holes up to 110 mm

Providing and fixing extruded aluminum window having extruded aluminum

Colour Powder Coated section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt, vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal two thousand one

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of hundred fourty

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details etc complete

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal

Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt, vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

one thousand five

47 52.00 shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 1583.95 SMT

hundred eighty three

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etc

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and fixing full height fully glazed door opening made of 12 mm thick

toughened safety glass of approved brand and manufacture, clear / frosted as

specified, machine cut to size with polished edges, including necessary cut-outs

for patch fittings and hardware. The work shall include providing and fixing heavy

duty S.S. 304 grade patch fittings (top patch, bottom patch, corner patch, lock

patch, over panel patch etc.) of approved, complete with all screws, accessories

and fittings. The item shall also include providing and fixing heavy duty double Five Thousand Two

action hydraulic floor spring with stainless steel cover plate, embedded properly Hundred Twenty Six

in floor, aligned and adjusted for smooth opening and closing action, including

making good the damaged portion of floor with cement concrete and finishing to

match existing flooring. The rate shall include providing and fixing S.S. D-type

handle (300–450 mm size), lock with keys, necessary sealant, gaskets, etching

design work (acid etching / sand blasting) on glass as per approved pattern, as

per specifications and direction of Engineer-in-Charge.

Providing and fixing standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour Powder Coated alluminium

One Thousand Two

49 10.00 frame with 5 mm thick transparent bronze colour tinted float glass with colour 1290.81 SMT

anodized alluminium frame for ventilation with 5 mm thick frosted glass as

details etc complete for.window

Provoding and fixing water proof flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer or plywood

face panels, including anodised alluminium butt hinges with necessary screws. Three Thousand

50 66.00 (A) Non-decorative type and block board core anodised alluminium butt hinges in 3725.89 Seven Hundred SMT

flush door shutters 35 mm thick. Alsoa pply front side 1.00mm decorative Twenty Five

laminate and back side 0.80mm white laminate with wood adhesive as directed

Providing and fixing hydraulic door closer with screws to pivoted / hinged door of

51 34.00 approved make & color approved. Rate shall be inclusive of fixing with using the 875.27 NOS

template as per supplier's specification.

Providing and fixing dead lock of approved 3 lever in doors with necessary One Thousand Four

52 34.00 screws and as per drawing, complete as approved by architect or engineer in 1479.65 Hundred Seventy NOS

Providing and fixing S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade

finish push -pull handles in pair of two, with necessary screws etc. Complete, as Two Thousand One

per drawing as approved by architect or engineer in charge. Two pieces of Hundred Fifty

handle shall be considered as one no. for measurement & payment.

Providing and Fixing 8" long S.S. tower bolts with necessary screws etc. Three Hundred

complete as directed by EIC. Ninety Eight

Providing & fixing 75 mm S.S. 316 satin finish baby latch (kitch or equivalent

approved make ) with indication of occupancy ( flat / round ) of kitch of equivalent Four Hundred

with necessary screws etc. Complete as approved by Architect or Engineer-in- Seventy One

charge with indication of occupancy.

Providing & fixing 75 - 100 mm white PVC door buffer with necessary screws etc.

56 34.00 105.04 One Hundred Five NOS

Complete as approved by Architect or Engineer-in-charge.

Providing fabricating, erecting and fixing of M.S.grill, fabricated from m.s. plat,

angles, tees, spacebar, round bar, pipes etc. complete as per Architect detail &

57 5856.00 Drawing including applying one coat of red oxide & two coat synthetic enamel 111.10 One Hundred Eleven KG

paint etc complete. As per Architect instructions and drawing or as directed by

engineer in charge.

Providing and fixing stainless steel railing made from anticorrosive 304 grade

s.s. pipe of 50mm dia (16 gage) as hand rails.s. 304 grade baluster as vertical

Two Thousand Four

58 32.00 support fixed in r.c.c. slab at 1.00 T0 1.20 mt c/c and height should be 900 mm 2426.87 RMT

Hundred Twenty Six

including accessories as per detail drawing as directed etc complete as approved

by engineer in charge

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

One Thousand One

59 572.00 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 1120.36 SQMT

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of

One Thousand One

60 43.00 steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3-coarse sand) 1195.02 SMT

Hundred Ninety Five

and jointed with white cement slurry.

Providing and laying Vitrified tiles 8 to 10 mm thick , 800 x 800 mm in flooring

One Thousand Four

61 113.00 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- 1450.36 SMT

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

62 24.00 :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with 1019.00 SMT

pigment to match the shade of slab including rubbing and polishing etc. complete.

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1 Cement : One Thousand One

3 coarse sand) and jointed with gray cement slury mixed with pigment to match Hundred Sixty Six

the shade of slab including rubbing and polishing etc. complete.

Providing and laying 600 x 600 antiskid mm size ceramic floor tiles of approved

make, 8-10 mm thick, in approved color, shade and pattern, laid over a prepared

and levelled surface on 12 mm thick cement mortar bed in proportion 1:3 (1 One Thousand Two

64 61.00 cement : 3 coarse sand), including proper soaking of tiles, filling of joints, cutting 1278.66 Hundred Seventy SMT

and finishing to required size wherever necessary, and finishing the joints with Eight

flush pointing in white cement complete, in line, level and slope as directed, all as

per architect’s design and instructions of the engineer-in-charge.

Providing and fixing 600 x 1200 mm size glazed ceramic tiles of approved make,

8–10 mm thick, in dado on walls, in approved color, shade and pattern, fixed over

properly prepared and levelled surface using suitable tile adhesive, including

One Thousand Four

65 64.00 surface preparation, necessary backing coat wherever required, cutting and 1495.81 SMT

Hundred Ninety Five

making openings for fixtures, finishing edges true to line and level, and filling the

joints with 3 mm wide epoxy grout complete, all as per architect’s design and

instructions of the engineer-in-charge.

Providing and fixing 300 x 600 mm size glazed ceramic tiles of approved make,

8–10 mm thick, in dado on walls, in approved color, shade and pattern, fixed over

properly prepared and levelled surface using suitable tile adhesive, including

One Thousand Four

66 282.00 surface preparation, necessary backing coat wherever required, cutting and 1433.19 SMT

Hundred Thirty Three

making openings for fixtures, finishing edges true to line and level, and filling the

joints with 3 mm wide epoxy grout complete, all as per architect’s design and

instructions of the engineer-in-charge.

Providing and laying rough chiseled dressed stone flooring over 20mm average

thick base of cement mortar 1:5 (1-Cement : 5- coarse sand) or L.M. 1:1.5 (1- Five Hundred

Lime putty : 1.5 - coarse sand) including pointing with cement mortar 1:2 (1- Seventy Six

cement : 2-stone dust) etc. complete. (A) 25mm thick (up to 10 ton)

Providing & fixing granite stone average 18 mm thick (16-18 mm) machine-cut &

machined polished stone in treads of steps, sill, copings, parapet top, window sill,

planter top, and such other locations, laid on 20 mm(average) thick cement

mortar 1:4 (1 cement:4coarse sand) and jointed with Super flex guranted fixing

solution by kerakoll mixed with pigment to match the shades of the slabs,

68 151.00 3568.33 Five Hundred Sixty SMT

including rubbing and polishing complete. The Stone used should be in one

single long piece up to 3000 mm as per drawing or as directed by Engineer-in-

charge. The exposed projected edges shall be of uniform thickness and of

uniform projection including molding , chamfering, rounding, polishing complete.

as directed by EIC.

Providing & fixing sandwich type average 18 mm thick (16-18 mm) machined

polished GRAINITE stone molded door frame of inner trip 130mm X18mm wide

and outer trip 150mm X 18mm wide jointed with Super flex guranted fixing

solution by kerakoll mixed with pigment to match the shades of the slabs, One Thousand One

including rubbing and polishing complete. The Stone used should be in one Hundred Fifty Six

single long piece as per drawing or as directed by Engineer-in-charge. The

exposed projected edges shall be of uniform thickness and of uniform projection

including molding , chamfering, rounding, polishing complete as directed by EIC.

providing and fixing 18–20 mm thick machine cut and mirror polished granite

stone slab for cupboard shelves / partitions at required height, of approved

colour, shade and pattern, free from cracks, flaws and pin holes, cut to required

size and shape, fixed over prepared surface with 20 mm thick cement mortar 1:4

Two Thousand One

70 31.00 (1 cement : 4 coarse sand) bed or with approved polymer based adhesive as 2100.80 SQMT

directed, including proper alignment, leveling and plumbing, edge moulding,

chamfering and polishing to exposed edges, filling joints with matching epoxy /

white cement, curing, cleaning and finishing complete in all respects as per

drawings and direction of engineer-in-charge.

Constructing sandwitch platform (80-90 cm height) of 18mm thick polished

black granite at top and 25mm thick kota stone slab using cement mortar 1:3 for

sandwich and fitting at bottom & edges with water proof rigid adhesives including

Two Thousand Eight

71 8.00 macking necessary grooves in walls with vertical kotastone 30mm X 2no 2880.52 SMT

sandwitch thick every 60cm center to center including alll labour material of

approved quality incl. full moulded round front edge fixed in wall for partition and

jointed with grey cement slurry including rubbing and polishing etc. complete

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand

Two Hundred Ninety

72 784.00 : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished 299.95 SMT

with a floating coat of neat cement. (A) 40mm thick.

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

73 784.00 slope and to be tempered to bring mortar creme out up to surface using white 779.70 SMT

cement including rounding off junctions and extending them up to 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade concret

74 404.00 404.05 Four Hundred Four RMT

as per approved design and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated

Six Hundred Ninety

75 690.00 mechanically and as per approved design Confirming to IS 15658 : 2006 699.84 SQMT

including 35 mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing single layer waterproof gypsum board 12.5 mm thick of

the make Newgood Group Co. Ltd. Or equivalent & Newgood Group Co. Ltd.

company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by G.I suspender of size 25 mm x 3 mm with intermediate channel of

size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of

76 660.00 606.95 Six Hundred Six SMT

size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimeter

channel A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including

paper tap sand soffit cleat, anchor fastener, scotch bolt connecting cleat joining

compound top coat on ceiling including making necessary opening for light fitting,

diffuser etc. complete as per detail drawing as directed.

providing and fixing to wall, ceiling and floor, SWR quality, heavy duty 6KG/RMT

pvc pipes of finolax / astral or equivalent make as approved by eic,, open laid for

soil / waste / rain water etc complete, with necessary specials, bends, such as Y

junction T junction (both single and double) including plugs, shoes, cowls flange

compression type fittings, wall clips, in proper line and level with necessary

support like split clamps of chilly make 3mm minimum thickness fixed with Four Hundred

77 175.00 approved anchor fasteners ,RCC or brick pedestals or battens if necessary to 412.08 RMT

wall, ceiling and floor, open laid complete jointing with suitable grade of good

quality solvent cement (as recommended by the manufacturer) including testing,

cutting, making good the wall, ceiling and floor, etc complete to the satisfaction of

EIC of the following OD. 75mm 6 Kg.F/cm

providing and fixing to wall, ceiling and floor, SWR quality, heavy duty 6KG/RMT

pvc pipes of finolax / astral or equivalent make as approved by eic,, open laid for

soil / waste / rain water etc complete, with necessary specials, bends, such as Y

junction T junction (both single and double) including plugs, shoes, cowls flange

compression type fittings, wall clips, in proper line and level with necessary

Five Hundred Thirty

78 247.00 support like split clamps of chilly make 3mm minimum thickness fixed with 532.27 RMT

approved anchor fasteners of HILTI equivalent ,RCC or brick pedestals or

battens if necessary to wall, ceiling and floor, open laid complete jointing with

suitable grade of good quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the wall, ceiling and floor,

etc complete to the satisfaction of EIC of the following OD. 110mm 6 Kg.F/cm

providing and fixing to wall, ceiling and floor, SWR quality, heavy duty 6KG/RMT

pvc pipes of finolax / astral or equivalent make as approved by eic,, open laid for

soil / waste / rain water etc complete, with necessary specials, bends, such as Y

junction T junction (both single and double) including plugs, shoes, cowls flange

compression type fittings, wall clips, in proper line and level with necessary

support like split clamps of chilly make 3mm minimum thickness fixed with

approved anchor fasteners of HILTI equivalent ,RCC or brick pedestals or Seven Hundred

79 135.00 battens if necessary to wall, ceiling and floor, open laid complete jointing with 782.75 RMT

suitable grade of good quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the wall, ceiling and floor,

etc complete to the satisfaction of EIC of the following OD. 160 mm 6 Kg.F/cm

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

80 98.00 72.65 Seventy Two RMT

shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

81 260.00 91.84 Ninety One RMT

shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or One Hundred Forty

shall be concealed as directed including necessary fittings etc. including testing Eight

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or One Hundred Ninety

shall be concealed as directed including necessary fittings etc. including testing Five

of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of One Hundred

following dia. nominal bore tube fittings and clamps including making good the Seventy

wall, ceiling and floor etc. complete. [A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Two Hundred Fifty

following dia. nominal bore tube fittings and clamps including making good the Three

wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and laying (two level or slopes) and jointing reinforced concrete light

duty, non pressure pipes I.S. class NP/2 of the following internal diameter with Six Hundred

collars and butt ends prepared for collar joints including testing of joints Seventy Seven

complete(E) 300 mm

Providing erecting and fixing double coated ISI water tank of required capacity

87 6000.00 3.95 Three LITER

each with all necessary fittings and connection etc. complete on terrace.

Providing and fixing (A) White glazed vitreous chinaware extended wall

mounted cantilever type European type water closet (535 x 370 x 350) with

Hydrolic seat cover, with (B) flushing tank constellation cistern with cistern

fittings, (C) CI chair bracket with rag bolt and GI 12mm rag bolt with nut and metal

washer etc. including supply and fixing of (D) 1 no Brass screw down stop tap.(D) Sixteen Thousand

25mm dia. with CP wall flange with (E) CP brass inlet connection with integral P One Hundred Eight

or S trap including cutting and making good the wall and floor as under with

supported on CI wall brackets and (F) flush cock 25 mm and (G) Jet spray

heavy duty with S.S. Braided hose 60 cm long etc. complete to the satisfaction of

Providing and fixing (A) white glazed vitreous chinaware European type water

closet with seat cover, etc. including supply and fixing of (B) 1 no Brass screw

down stop tap.(C) 25mm dia. with CP wall flange with CP brass inlet connection

Four Thousand Four

89 1.00 with integral P or S trap including cutting and making good the wall and floor as 4462.18 NOS

Hundred Sixty Two

under with supported on CI wall brackets and (D) flush cock 25mm (E) Jet spray

heavy duty with S.S. Braided hose 60 cm long (F) flushing tank constellation

cistern with cistern fittings etc. complete to the satisfactionof EIC

Providing and fixingProviding and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting holes and making good

the same including fittings.(a) Vitreous China:(ii) Flat Back washbasin 550 mm x

v 400mm size. (i) In white colour. (b) 32mm CP cast brass bottle trap heavy

casted, with 250mm long wall connection pipe and wall flange with rubber

90 2.00 7541.67 Five Hundred Forty NOS

adopter for waste connection and one 40mm dia waste coupling. (c) 1 no heavy

quality CP brass stop tap with wall CP flange (d) 15 mm size. pillar cock with

fitting complete. (e)1 no 15mm NB heavy quality CP brass inlet connection with

unions end. the supporting bracket shall be painted with 3 coats of approved

paint of approved shade etc complete

Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with over all

size 610x460 mm & bowl size 560x410x200 with single hole for pillar tap fixing in

91 2.00 sandwitch platform including cutting holes and making gods the same, necessary 3042.12 NOS

fixtures, connections and waste pipes with c.p. pillar cock 15mm heavy duty swan

neck etc complete

Providing and fixing screw down brass chromium plated heavy quality two way

Two Thousand Five

92 10.00 bib-tap on water supply pipe lines of 15mm dia with or with extension piece but 2567.42 NOS

Hundred Sixty Seven

with a flange etc. complete to the satisfaction of EIC.

Providing and fixing 15 mm knob cp brass heavy quality wall or floor mounted Two Thousand

93 2.00 sink tap, with cp wall flange, casted spout of three way etc. complete to the 2776.49 Seven Hundred NOS

satisfaction of eic. Seventy Six

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass

Eight Hundred Fifty

94 13.00 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge 859.41 NOS

with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed

95 13.00 616.42 Six Hundred Sixteen NOS

to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing ss or brass chromium plated double robe hook as per the Nine Hundred

design and specifications etc., complete to the satisfaction of eic. Eighty Seven

97 10.00 Providing and fixing toilet paper holder.(A) C.P. Brass 427.99 NOS

Providing and fixing hand shower (health faucet) with cp flange with 8 mm dia., 1 Five Hundred Eighty

m long pvc tube and wall hook with fitting . as approved by the consultants. Two

99 13.00 Providing and fixing in position cowel went to pipes.(B) 75 mm dia. 393.04 NOS

100 13.00 Providing and fixing in position cowel went to pipes.(B) 100 mm dia. 505.17 Five Hundred Five NOS

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing design with

Five Hundred Eighty

101 30.00 C.I. screwed down or hinged grating including the cost of cutting and making 586.60 NOS

good the walls.e As per Architect instructions and drawing or as directed by

engineer in charge.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and

102 32.00 painting with two coats of Anti- corrosive paint etc.complete. as per architect 207.66 Two Hundred Seven NOS

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) Six Hundred Sixty

40mm dia. Three

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) Four Hundred

25mm dia. Twenty

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal One Hundred Eighty

450mm x 600mm including 500mm x 450mm C.I. horizontal grating with frame Two Thousand

complete. (up to 10 ton ) Seventeen

Providing and fixing screw down bib taps of following size.(B) Brass chromium One Hundred Eighty

plated screws down Bib Tap. (i) 15mm dia. Six

Providing and fixing pillar tap, capstan head, screw down high pressure with

108 5.00 308.73 Three Hundred Eight NOS

screws, shanks and back nuts. (i) 15mm dia.

109 5.00 Providing and fixing brass screw down stop tap.(C) 25mm dia.. 220.82 Two Hundred Twenty NOS

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm Two Hundred Eighty

Providing and fixing chromium plated brass half trun flush cock of approved Two Hundred Sixty

quality including fixing in pipe line etc. complete.(ii) 25mm dia. Three

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

One Thousand Two

112 12.00 water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard 1292.19 NOS

Hundred Ninety Two

weight.(i) Square mouth traps (A) 100mm x 100mm size P type. (up to. 10 ton)

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

113 12.00 Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand :4- 7180.44 NOS

One Hundred Eighty

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more inlets. (up to 10 ton)

Providing & constructing BB masonry in C.M. 1:6 (1 cement : 6 coarse sand) and

cement concrete 1:2:4(1 cement : 2 sand : 4 graded stone age. of 0mm size BT

kapchi) septic tank of 3m x 0.9 m x 1.5 m internal dimension with necessary

compartment of grit chambers and septic tank with necessary inlet and outlet

connections with cement plaster (15 mm thick) in C.M. 1:4 (1 cement : 4 sand) Twenty Four

114 2.00 with water proofing material 1:5:10 (1 cement : 4 sand) brick bat concrete 24590.47 Thousand Five NOS

bedding RCC 1:2:4 top cover slab 12 cm thick with C.I. cover of 60 cm x 45 cm Hundred Ninety

size (light duty) 75mm dia. C.I. ventilating pipe 2 mt. long with cowl vent 40mm

thick IPS flooring 10 cm. thick cement vata mild steel for steel and finishing to

exposed faces in C.M. 1:3 (1 cement : 3 sand) curing etc. complete As per

Architect instructions and drawing or as directed by engineer in charge.

Providing and constructing sock pit of 3.00 mt. dia inside and 5.00 mt. depth with

honey combed masonry upto 4.00 mt. from bottom and 1.00 mt. brick masonry in Fifty One Thousand

C.M. 1:5 top with RCC slab cover of M200 vent pipe 1.80 mt. long 75 mm dia & Five Hundred Fifty

C.I. cover and cowl vent etc. complete

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1 Cement :2- Coarse sand :4-stone aggregate 20mm nominal size) finished Eleven Thousand

smooth complete including curing and festing (i) Inside size 900mm x 1200mm Forty Two

and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight

of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement:

5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not Nine Hundred Fifty

less than 35Kg. Eight

Supplying and fitting ASG R.O. System 300 liter per hour capacity of Auto Start

& Auto Stop & Auto flush @ every start etc. comp. including storage water tank of

118 2.00 223356.45 Thousand Three NOS

Sintex or equivalent and necessary pipe connection etc. complete as direction &

Hundred Fifty Six

Providing and fixing wooden screen partition of approved design and pattern at

required location, made out of seasoned and chemically treated hardwood /

commercial grade plywood framework of required section size, rigidly fixed to

floor, wall and ceiling with necessary screws, fasteners, holdfasts and hardware.

screen panel to be finished with 12 mm / 18 mm thick commercial / marine grade

plywood or mdf board as required, incorporating decorative cnc cut pattern / Three Thousand Six

wooden battens / slotted members as per approved drawing. exposed surfaces Hundred Fifty Nine

to be finished with 1.0 mm thick laminate / natural veneer with melamine polish /

pu polish of approved shade, including edge banding, sanding, filling, primer and

final finishing coats complete. all joints neatly finished, alignment true and level,

including provision of necessary grooves, mouldings, beading and backing

support wherever required, etc. complete as directed by engineer-in-charge.

Providing and fixing frameless glass partition with door in bathrooms at required

location, made of 10/12 mm thick toughened safety glass of approved quality,

clear/frosted as required, with machine polished edges and necessary cut-outs.

partition and door to be fixed with s.s. 304 grade patch fittings/hinges, s.s. handle, Five Thousand Two

magnetic gasket and pvc water drip channel, complete with inside latch/lock. Hundred Twenty Six

installation to be made water-tight using approved silicone sealant at all joints.

rate to include all materials, hardware, labour, transportation, fixing, alignment,

tools and tackles etc. complete as directed by engineer-in-charge.

Providing and fixing cnc cut cement fibre screen panels for exterior facade at

required height and location, made from 12/16 mm thick high density cement fibre

board of approved make, weather resistant, moisture proof and suitable for

external exposure. panels to be factory cnc cut as per approved design with

smooth finished edges.panels to be fixed on m.s. structural framework of

required size hollow sections, properly welded, aligned and anchored to r.c.c. Four Thousand Four

members with approved anchor fasteners. m.s. frame to be treated with zinc rich Hundred Thirteen

primer and finished with two coats of enamel/epoxy paint. fixing to be done with

stainless steel screws and neoprene washers, ensuring stability against wind

load at higher levels. Rate to include all materials, fabrication, supports,

scaffolding, lifting, labour, transportation and installation complete in all respects

as directed by engineer-in-charge.

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing and fixing aluminium louvers fabricated from extruded aluminium alloy

sections (Grade 6063-T5/T6 or equivalent) comprising outer frame of minimum

1.6–2.0 mm thickness (section size approx. 50 x 25 mm or as required) and fixed

or adjustable blades of approved flat/curved profile having minimum 1.2–1.6 mm

thickness and 75–150 mm depth, spaced suitably for proper ventilation and light

122 30.00 control. All sections shall be powder coated (60–80 microns) or anodized 4065.25 SMT

(minimum 15 microns) in approved colour. Adjustable type louvers shall include

necessary manual or motorized operating mechanism with SS/aluminium linkage

for smooth operation. The item shall include all required brackets, fasteners,

anchors, gaskets, sealant, fabrication, transportation, labour and installation

complete in position as per drawings and direction of Engineer-in-charge.

Providing and fixing Stainless Steel (SS) Kitchen Basket of approved size and

type, manufactured from 100% SS 304 grade wire with polished finish, minimum

wire thickness as per manufacturer standards. Basket shall be factory-made, rust-

123 1.00 25204.55 Thousand Two SMT

resistant, smoothly welded, and suitable for modular kitchen storage. Complete

with required fittings and placed inside kitchen carcass as directed by the

Engineer-in-Charge.

Providing and fixing kitchen drawers and shutters fabricated from boiling-water

resistant (BWR) 18mm plywood of approved thickness, finished with 1.0 mm/1.25

mm thick laminate on exposed surfaces and balancing laminate on inner faces.

124 6.00 9872.75 Eight Hundred SMT

All edges to be sealed with PVC edge banding. Drawers to include necessary

channels/slides and shutters to include hinges and handles of approved make.

Complete as per design and as directed by the Engineer-in-Charge.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or

L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or Seven Hundred

G.I. limpet washer. filled\ with white lead complete excluding the cost of purlins, Thirty Four

Rafters and Trusses.(1) 0.80 mm thick sheet.

Structural steel work ( Confirming to IS 4923 1997) riveted, bolted or welded in

builtup for all type sections, in framed work, including cutting, hoisting, fixing in

One Hundred Thirty

126 12425.00 position and applying a one priming coat of approved steel primer and Painting 134.33 KG

two coats of oil paint all etc. complete as per the structural designs and directions

of Engineer in charge.

Dismentaling the existing structure including removing and stacking the

127 185.00 930.23 Nine Hundred Thirty CUM

dismentelled materials as and where directed. (A) R.C.C. work

Box cutting the road surface to proper slope and camber for making a base of

128 139.00 road work including removing the excavated stuff and depositing on the road side 109.05 One Hundred Nine cum

slope as directed up to 50 mts. Lead.

Add. Extra for disposing of the excavated stuff of above items for lead of (e) One Hundred

400M to 500M. Twenty Nine

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand

Two Thousand Nine

130 107.71 broken stone aggregates 40 mmnominal size) and curing complete excluding 2968.91 cum

Hundred Sixty Eight

cost of formwork in (A) Foundation and Plinth

Providing & laying cement concrete M-200 for C.C road and curing cost of form

work, finishing the cement concrete road by trimix process inclusive of labor

charges for trimix Vacuum, dewatering service process on cement concrete road Four Thousand

131 83.39 by using vacuum, dewatering pump, surface floater, surface vibrator including 4881.33 Eight Hundred cum

channeling & making grooves & rough finish to surface by providing expansion Eighty One

joint, contraction joint & construction joints with filling of joints with asphalt filler as

per directed by engineer inchrges & as per specification

Four Hundred Thirty

132 22.00 Supplying and Filling fertile sandy soil as per Architect's instructions. 438.64 cum

133 73.00 Levelling / Final levelling as per Architect's instructions. 61.21 Sixty One smt

134.00 Supplying Plant and other necessary materials for landscaping.

One Hundred Eighty

134.01 50.00 Buddha Bamboo(4' Long) 181.80 NOS

One Hundred Thirty

134.02 20.00 Cordia Sebestena(6'-7' long) 131.30 NOS

One Hundred Thirty

134.03 20.00 Jacaranda Mimosifolia(6'-7' long) 131.30 NOS

134.04 20.00 Delonix Regia (7' Long) 97.97 Ninety Seven NOS

134.05 20.00 Cassia Fistula(4'-5' Long) 52.52 Fifty Two NOS

Qty. Description Rate Unit Amount

1 2 3 In Words 5

134.06 20.00 Bauhinia Purpuria(6' Long) 80.80 Eighty NOS

134.07 20.00 Cocos Nucifera(10' Long) 672.66 NOS

134.08 20.00 Caryota Mitis(7'-8' Long) 672.66 NOS

134.09 20.00 Cycus Revoluta(Bag: 20x20) 4848.00 Eight Hundred Forty NOS

134.1 20.00 Furkaria Ginginati(2' Long Leaf) 1010.00 One Thousand Ten NOS

134.11 12.00 Nulembo Mucifera(bulb) 116.15 NOS

One Hundred Eighty

134.12 20.00 Ixora Javanica(Red)(1'6"-2' Long) 186.85 NOS

134.13 20.00 Ixora Javanica(Orange)(1'6"-2' Long) 210.08 Two Hundred Ten NOS

134.14 12.00 Bambusa Aurea Verigata(7'-8' Long) 150.49 One Hundred Fifty NOS

134.15 12.00 Plumeria Rubra(5'-6' Long) 1012.02 NOS

134.16 12.00 Hibiscus rosa sinensis(Hybrid-White)(2'-2'6" Long) 42.42 Forty Two NOS

134.17 12.00 Hibiscus rosa sinensis(Hybrid-Pink)(2'-2'6" Long) 42.42 Forty Two NOS

134.18 12.00 Hibiscus rosa sinensis(Hybrid-Red)(2'-2'6" Long) 42.42 Forty Two NOS

134.19 12.00 Hibiscus rosa sinensis(Hybrid-Chilly)(2'-2'6" Long) 53.53 Fifty Three NOS

134.2 15.00 Phycus Green(5'-6' Long) 761.54 NOS

134.21 15.00 Phycus Black(5'-6' Long) 761.54 NOS

One Hundred Ninety

134.22 12.00 Codieum variegatum(1'6"-2' Long) 197.96 NOS

134.23 20.00 Catharanthus Roseous(Purple, Red, White)(below 1' Long) 40.40 Forty NOS

134.24 10.00 Salvia Officinalis(Red)(below 1' Long) 45.45 Forty Five NOS

134.25 10.00 Tagetes erecta(below 1' Long) 35.35 Thirty Five NOS

134.26 30.00 Alpinia Purpurata(2'6" Long) 55.55 Fifty Five NOS

134.27 15.00 Tradescantia Pillada 55.55 Fifty Five NOS

Two Hundred Sixty

134.28 73.00 Australian Carpet Lawn 264.62 SMT

Eight Hundred Forty

134.29 20.00 Fertilizers-FYM 846.68 BRASS

134.3 30.00 Fertilizers (D.A.P/Urea) 14.28 Fourteen KG

134.31 30.00 Pesticides/Insecticides 326.43 LTR/KG

Six Hundred Fifty

134.32 30.00 Termaticide(Imidachlopride) 652.86 LTR

134.33 30.00 Gravels 91.81 Ninety One KG

Providing and fixing pop-up Sprinklar system with all necessary valve and Five Thousand Eight

connection complete as directed by engineer in charge. Hundred Sixty Nine

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected

on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

206 (f) with medium class Rigid PVC pipe and accessories erected concealed in four hundred eighty

wall/ceiling complete Cat-III five

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

40 (f) with medium class Rigid PVC pipe and accessories erected concealed in six hundred seventy

wall/ceiling complete. Cat-III four

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front three hundred fourty

plate modules erected on / in wall / ceiling as per pipe erected with following type seven

of accessories.[A] For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu.

Mains from near by switchboard/db board upto 6 mt.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete Cat.III

40 [C] 6/16A Plug and 16 A switch with 2-4 sq.mm Cu. Mains with 2.5 sq.mm (

six hundred fourty

139 green) earthing wire(f) with medium class Rigid PVC pipe and accessories 641.35 Pt.

erected concealed in wall/ceiling complete Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic/Wooden

140 box, single mounting base frame covered with textured / metallic/white front plate 603.98 six hundred three Pt.

modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

139 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with two hundred fifty

textured / metallic/white front plate modules erected on / in wall / ceiling with seven

following type accessoriesCat-III

Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories one hundred sixty

erected on Metal / PVC / wooden box covered with 3 mm thick seven

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

12 Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

143 metallic/white front plate , modules erected with necessary connections as per 160.59 one hundred sixty Nos.

site situation directed by Engineer In charge..(3) Two Pin/RJ-11 Telephone

Socket[A] For One Gang Cat-III

144 10 (4) TV Co-axial Socket outlet Cat-III 160.59 one hundred sixty Nos.

9 (21) Foot Light as per colour requirement with concealed box, modular

four hundred ninty

145 accessories, acrylic glass cover with suitable LED watt with all accessories as 494.90 Nos.

per following module(b) Four modules Cat-III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

146 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 82.82 eighty two Mtr.

PVC insulated stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

147 / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 112.11 one hundrted twelve Mtr.

green colour for earth continuity of following size(A) with medium class Rigid PVC

pipe and accessories(a) 2 wire 4 sq. mm

255 one hundred fourty

(b) 2 wire 6 sq. mm 147.46 Mtr.

60 (h) 4 wire 6 sq. mm 260.58 two hundred sixty Mtr.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

148 24.24 twenty four Mtr.

fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (a)20 mm

Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE &

149 62.62 sixty two Mtr.

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (e) RG -

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

150 to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

Qty. Description Rate Unit Amount

1 2 3 In Words 5

30 (e) One wire 6.00 sq. mm 56.56 fifty six Mtr.

20 (f) One wire 10.00 sq. mm 91.91 ninety one Mtr.

110 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

151 grade ISI marked copper wires of following size to be erected as directed. e) 1.50 46.46 fourty six Mtr.

Sq.mm 3 core round PVC sheathed

240 Supplying & erecting approved make Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

152 20.20 twenty Mtr.

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured(2) Two Pairs

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as one thousand three

per DoT standard approved with krone strips(b) Suitable for 20 pair hundred sixty eight

10 Supplying & erecting Approved make call bell indicator with buzzing sound and

one hundred fourty

154 Red light indicating lamp with Red light button to attend the call suitable for 240 v 148.47 Nos.

50 c/s supply to be erected.

155 11 Decorative call bell Ting-tong box type 250 volts complete erected 71.71 seventy one Nos.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

18 three hundred

157 (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III 373.70 Nos.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, one thousand ninty

Luminaire efficacy> 85 lumens/watt , seven

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (I) Adjustable spot

light with COB led having aluminium reflector of following wattage (iii) 15 Watts

21 (I) Adjustable spot light with COB led having aluminium reflector of following eight hundred fifty

wattage (i) 8 Watts Cat.III nine

27 eight hundred

(F) Spot Light 425 Lumens, Surge-2KV(i) 3 to 7 Watts Cat-III 813.05 Nos.

214 (D) LED Strip Light (i) Minimum 4.8W-120 LED per meter (2 one hundred thirty

wire, IP-65) with non integral suitable Driver complete Cat.III five

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 312.09 three hundred twelve Nos.

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

159 engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have four thousand nine

440VAC line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-III hundred ninty seven

2 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for four thousand eight

vertical mounting driver and accessories wired upto terminal block.IP 65 (ii)32- hundred ninteen

Qty. Description Rate Unit Amount

1 2 3 In Words 5

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have six thousand eighty

440VAC line supply with over-voltage protection. (iii) 60 to 90 watts cat.III eight

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

160 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected 112.11 one hundred twelve Nos.

in existing box. confirming to IS 8828/1996 with ISI Mark Cat-III

12 Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 330.27 three hundred thirty Nos.

having following capacity (B) 40 Amp. Cat.III

4 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

five hundred ninty

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 595.90 Nos.

having following capacity (a) 6 to 32 Amp. Cat-III

7 six hundred sixty

(B) 40 Amp. Cat.III 668.62 Nos.

20 providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick one thousand nine

action & tripping with all advance feature & do not incorporate any electronic hundred sixty nine

component. for following Max. rating erected as directed (i) 25 Amps.DP

6 Pproviding and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

six thousand one

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

162 6173.12 hundred sevenyu Nos.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating sixteen thousand

163 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 16221.61 two hundred twenty Nos.

c/s. with all internal connections, spreader tinned copper & complete erected in one

existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

eight thousand fifty

164 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 8055.76 Nos.

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat.III

1 Supplying & erecting approved make Four Pole 415V change over switch interior thirteen thousand

165 for panel mounting with operating mechanism A.C.23 duty confirming to IS for 13353.21 three hundred fifty Nos.

(E)250A / 320A Cat-III three

1 two thousand six

(A)32-40A Cat.III 2611.86 Nos.

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

three thousand two

166 colour insulating tape for phase sequence of following current carrying capacity, 3202.71 Rn.Mtr

hundred twenty two

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.(B) Suitable for

200 Amp. capacity

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate one thousand one

nos. of MCBs.(The DBs should be used of same company of MCB to be used) hundred fifty two

suitable for(A) single phase incoming and horizontal single phase outgoing(b)

sheet steel double door (IP-43)(iii)8 way

(B) three phase incoming and single phase horizontal type outgoing Per phase two thousand nine

isolation type (PPI)(b) sheet steel double door (ii)6 way hundred thirteen

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S.

fourteen thousand

169 sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions 14902.55 Sq.Mtr

nine hundred two

with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB

for measuring instruments, earth bus & earth bolts, foundation flange - bolts-

170 base Plates, sufficient nos. of hinged doors, handles with locking arrangement

and rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. Building Work

Qty. Description Rate Unit Amount

1 2 3 In Words 5

(The rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at

CPRI approved factory (i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

172 sections complete with cutting, welding, grinding & finishing duly painted with one 77.77 seventy seven Kg.

coat of red oxide with erection on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing complete.

10 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

three hundred sixty

173 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 368.65 Nos.

complete with necessary 8 SWG earth wire.

174 For using salt and charcoal / coke as required for pipe type earthing. 171.70 Nos.

15 seven hundred ninty

175 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

176 (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

2 (a) For Electrical Installation up to 440V in normal soil

four thousand five

Length of pipe - 1 Mtr 4591.46 Nos.

hundred ninty one

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

177 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 490.86 four thousand ninty Mtr.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

178 Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

460 one hundred twenty

(B) 4 core 6 Sq. mm 126.25 Mtr.

210 Making trench in soft soil of suitable width of 90 cm deep for laying cable or

179 locating the fault all over the run and back filling the same and making the 55.55 fifty five Mtr.

surface as normal ground.

5 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back four hundred thirty

filling the same and making the surface as normal ground. (B) If additional two

machinery like hammer driller or JCB use [Add]

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

234 (A)50 mm outer dia 62.62 sixty two Mtr.

70 (B)63mm outer dia 73.73 seventy three Mtr.

Providing and, fixing heavy duty flange type brass double compression type

182 cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

6 one hundred thirty

(D) 3 & 1/2 core 95 Sq. mm 131.30 Nos.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

183 following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

6 (D) 35/50 Sq.mm. 20.20 twenty Nos.

18 (F) 95 Sq.mm. 40.40 fourty Nos.

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm one thousand nione

sweep complete having 3blades with aluminium blades with , canopy & 30 cm. hundred fourty eight

down rod erected with earthing.(Make shall be approved by Engineer in charge))

11 Providing & erecting Approved make Ceiling Fan with double ball bearing with

Condenser 230 volt A.C.50 Hz. 900 mm sweep complete having 3 Aluminium one thousand nine

blades, canopy erected complete. [ Make shall be approved by Engineer in hundred eighty two

40 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

186 rod erected duly painted for fan complete with proper insulation without leakage 108.07 one hundred eight Mtr.

40 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

187 108.07 one hundred eight Nos.

box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS one thousand

body with louvers Cat-II fivehundred fifty nine

Supplying and erecting approved make panel mounting type Digital Voltmeter

one thousand two

189 having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel 1275.63 Nos.

hundred seventy five

board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps one thousand five

suitable to operate on 500 Volt AC , erected on existing panel board with all hundred dfidty eight

connection, wiring etc .with manufacturers calibration certificate.

4 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC threehundred

Supply 500 V on existing panel board with necessary connections. seventeen

6 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

192 ratio 15 VA burden erected in existing CRCA box duly secured with insulating 274.72 Nos.

materials connected to the meter

6 Supplying and erecting approved make suitable panel indicator LED type lamp,

193 43.43 fourty three Nos.

lens cover, complete erected with necessary connections.

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

194 integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

8 (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with six thousand eight

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with 6874.06 hundred seventy Nos.

necessary G.I. J Bolts .Approx Pole weight 46 kg four

Supplying and erecting Street light pole bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

195 having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms.

2 four hundred ninty

[A] Single Arm bracket 0.5 Mtr 491.87 Nos.

6 six hundred twenty

[B] Double Arm Bracket 0.5 Mtr 622.16 Nos.

Supplying & erecting approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

196 515.10 five hundred fifteen Nos.

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of following size of

box.(B) 250mm x 200mm x 100mm [deep]

Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with three thousand five

internal and outside looking arrangement with look and keys in duplicate 35 x 35 hundred ninty five

x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

Qty. Description Rate Unit Amount

1 2 3 In Words 5

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle

iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle.

1 Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts

three thousand one

198 Minimum switching setup time 1 minimum & LCD display. Also comprised 3168.37 Nos.

hundred sixty eighty

permanent ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

1 Supplying & erecting power contactor ,AC3 duty for time switch complete erected eight hundred fifty

as per direction Cat III [C] 4 pole 440V 16 Amp. seven

SITC of Digital / PCM / TDM EPABX System having SMT design, system with

flexible universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos.

conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP

program me through Analog telephone digital key from Ethernet, public address

cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick

Dial-Single Digit dialing of any two external number, Once only ring device,

200 Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot

Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call

Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID

(CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port,

Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory Printing with following

capacities [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

1 [B] No of Extension 24, No of Junctions 9, 8 Port IP Resource in-built, 4 Port Web

fifty one thousand

base Video Conferencing, No of expandable ports : 96, Operators Console - 01 51440.31 Nos.

four hundred fourty

Compatible : ISDN

11 Supplying & erecting push button type telephone instrument having speaker

phone Caller ID & speaker phone with one touch memory (min.6 nos.)& 99 eight hundred ninty

memories with display system Single line [[Approved by Competent Authority i.e. eight

not Below the rank of Executive Engineer ]

Providing and erecting IP Phone with display with all IP system supported five thousand six

[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] hundred fourty nine

Providing and erecting approved make split air-conditioning unit consisting of

copper condensing unit with fan motor, hermetically sealed rotary compressor

with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper insulated fifty two thousand

copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, fourty two

Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Premium Category

(b) for 1.5 ton capacity

60 Supplying and erecting insulated pair of soft copper tubing open or concealed

ninehundred sixty

204 including power and control cable,necessary PVC drain pipes for Split AC 965.56 Rmt.

machine up to 4 TR capacity with necessary core cutting.

1 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be comprising fifty five thousand

205 of hermetically sealed compressor, fan motor, condensing unit, water tank 55893.40 eight hundred ninty Nos.

surrounded by evaporating, coil, thermostats, relay etc.complete with necessary three

inlet & outlet connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water purification system

with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with

206 29187.99 thousand one Nos.

psi inline type post carbon filter auto low & high pressure switches with following

hundred eight seven

size of storage tank & LPH capacity & erected as directed[C] 50 Ltr / Hr with

psi 2 nos booster pump

Supplying and erecting horizontal / vertical mounting type storage water heater

with copper container housed in M.S./S.S./ABS body insulated with glass

eighty thousand

wool/puff complete with heating elements,adjustable thermostats 300C to 850C,

207 8373.91 three hundred Nos.

indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts,

nuts. washers & cementation (A) 10 Ltr. with 3 KW. heating element Cat.III

Premium Category Make:- Racold,A.o.Smith,Venus

Providing & erecting open well horizontal mono block pump set with cast iron

fifteen thousand

body, complete for three phase submersible motor having [C]

208 15707.52 seven hundred Nos.

For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM

to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe

Qty. Description Rate Unit Amount

1 2 3 In Words 5

Supplying & erecting approved make motor control cubical panel (Direct - on -

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and outside

with hinged doors and locking, arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating

lamps for R- Y - B phases, overload relay, Automatic water level controller,

209 7722.46 seven hundred Nos.

Ammeter, Voltmeter each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator, overload

relay & contactors will be of L & T, Siemens or BCH make only. (A) DOL up to

Lowering of submersible motor pump set at the depth of following ,complete with

required. Nos. and size of casing pipes erected by means of proper chain pulley

eight hundred fifty

210 block & pipe wrenches after checking of threads of each pipe with coupling to 856.48 Per Job

take the load of the pump set and pipe assembly filled up with water (D)For Open

well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

10 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

one hundred fourty

211 Submersible copper cable approved make of following Size. (C) 3 Core x 4 Sq. 146.45 Mtr.

I / We am / are willing to carry out the work at …………….% below / above ( Should be written in figure and words ) of the tender rates mentined above Amount of my / our tender works out as under.

Tender amount Rs………………….

Add…….% above Rs………………….

Net in words Rs………………....

Credit for Dismental material and Recovery (Fix Deduction) Rs0 (RA BILL)

1 The Contractor Shall Exhibit a board with detailed Specification and details of work as directed by the Engineer-in-Charge for which no extra payment shall be made.

2 The Labour cess will be deducted as per prevailing rules i.e.1% of the work done.

3 GST and Income tax TDS will be deducted as a source while making payments of bills.

4 In all R.C.C.Items in Rate Analysis Standard Cement Consumption has been taken as per GOVT.G.R.PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.therefore in R.C.C. items where

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division

Visnagar Mehsana