REPAIR REPLACEMENT OF EXISTING FITTINGS OF MD ACCN OTM ACCN WITH LED FITTING AND FIXTURES AT WEST AREA UNDER GE DEHU ROAD

Amount

Taking down copper / aluminium point wiring (Light, fan, socket or power socket) complete including fixtures and fittings such as switches , ceiling roses, pendants, regulators, socket light fitting etc and making good disturbed surfaces of walls, floor etc. complete all as directed.

Taking down unserviceable Main switch, MCB DB TPN, MCB DB, TPN/SPN/SP etc. and making good disturbed surfaces of walls complete all as directed.

M&L for Point wiring complete with and including 1.5 sq. mm ( nominal area) single core multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade I S I marked drawn through casing caping suitable size with accessories such as bend ,tees, junction boxes etc. incl. 1.5 Sqmm PVC insulated and unsheathed multi strand copper conductor as earth wire including Concealed PVC premoulded switch board ISI marked/ 3mm thick hylam sheet in existing MS / PVC terminal box of suitable size for housing switch, socket and fan regulators etc complete and making good the disturbed surfaces of wall by cement patch all and matching the surface to the existing finising colour all as specified and directed for the following :-

One light point controlled by one one way switch.

One Fan point controlled by one one way switch.

One light point controlled by two 2 way switches.

One bell point controlled by one bell switch.

One 5 pin 5 Amps socket outlet on the same board with other switch controlled.

One 5 pin 6 Amp switch socket outlet on the independent board.

Ditto all as per item No 3 above but wiring with 2.5 sq. mm multy stranded copper conductor PVC insulated but unsheathed FRLS cable for 5 pin 15 Amps multi purpose socket outlet.including 2.5 Sqmm PVC inulatedand unsheathed single core copper conductor cable as a earth wire to common earth connection to earth duly

M&L for Point wiring complete with and including 1.5 sq. mm ( nominal area) single core multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade ISI marked drawn into including concealed PVC Rigid Non-metallic Conduit ISI marked suitable size thickness not less 1.5 mm with accessories such as bend ,tees, junction boxes etc. incl. 1.5 Sqmm PVC insulated and unsheathed multi strand copper conductor as earth wire including concealed PVC premoulded switch board ISI marked / 3 mm thick hylam sheet in existing MS/ PVC terminal box of suitable size for housing switch, socket and fan regulators etc complete and making good the disturbed surfaces of wall by cement patch all and matching the surface to the existing finising colour all as specified and directed for the following :-

One light point controlled by one one way switch.

One Fan point controlled by one one way switch.

One light point controlled by two 2 way switches.

One bell point controlled by one bell switch.

One 5 pin 5 Amps socket outlet on the same board with other switch controlled.

One 5 pin 6 Amp switch socket outlet on the independent board.

Ditto all as per item No 5 above but wiring with 2.5 sq. mm multy stranded copper conductor PVC insulated but unsheathed FRLS cable for 5 pin 15 Amps multi purpose socket outlet.including 2.5 Sqmm pvc inulatedand pvc unsheathed single core copper conductor cable as a earth wire to common earth connection to earth duly

Supply and fixing in repair modular switch 1 way 6A , 230 V, 1 Module single pole.

Supply and fixing in repair modular switch 2 way 6A , 230 V, 1 Module single pole.

Supply and fixing in repair modular switch 1 way 16 A, 230 V, 1 Module single pole .

Supply and fixing in repair modular calling bell switch 6 A, 230 V, 1 Module.

Supply and fixing in repair modular socket outlet 2/3 pin , 6 Amps, 2 module.

Supply and fixing in repair switch socket combination 2 in 1, 5 Amps Flush type.

Supply and fixing in repair modular socket outlet 5/6 pin , 6/16 Amps, 2 module.

Supply and fixing in repair modular fan regulator , 120 W , 2 Module.

Supply and fixing in repair modular white cover plate with frame 1 module.

Supply and fixing in repair modular white cover plate with frame 3 module.

Supply and fixing in repair modular white cover plate with frame 6 module.

Supply and fixing in repair modular white cover plate with frame 8 module.

S & F in repair ceiling rose surfase type 65 x 50 mm three terminals type.

S & F in repair of old ding dong electric calling bell with new one 240V, 50Hz, AC complete all as specified.

S & F in repair for White Angle lamp holder, Insulated body with back plate for batten fitting complete.

S & F in repair MCB SP 5 to 40 amps, AC, 240V, 50 Hz, having 'C' charactristic Complete.

S & F MCB SPN 10 to 40 Amps, AC, 240V, 50 Hz, having 'C' charactristic Complete.

S & F in repair Isolator TPN 100 Amps, AC, 415V, 50 Hz and complete all as specified and directed.

S & F in repair distribution board sheet metal enclosures for single door factory made duly painted 8 way SPN 240 V , suitable for fixing MCB /Isolators all as specified .

S & F in repair distribution board sheet metal enclosures for single door factory made duly painted 4 way SPN 240 V , suitable for fixing MCB /Isolators all as specified .

S & F in repair distribution board sheet metal enclosure with double door factory made 4 way TPN, 415 Volt suitable for fixing MCB TPN as main incoming all as specified

S & F in replacement of 4 feet 18W linear aluminium LED Batten basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and electric coneection with suitable copper wire complete all as specified. Cat Part No : LHEXBTP7IN1W018 of Havells, SZSLBMX018 of Shakti and equavalant of Philips, Bajaj, Crampton and HPL.

S & F in replacement of 4 feet 20W linear aluminium LED Batten professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size. Cat Part No : LHEXACP7IN1W020 of Havells, SZSLAMX020 of Shakti and equavalant of Philips,Bajaj, Crampton, Havells and HPL.

S&F in replacement of 4 feet 22W linear aluminium LED Batten professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size complete with acessories. Cat Part No : LHEXACP7IN1S022 of Havells and equavalant of Philips,Bajaj, Crampton, Havells and HPL.

S & F in replacement of 2 feet 09W linear aluminium LED Batten with white acrylic cover complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size. Cat Part No : LHEXBLP7IN1W009 of Havells, SZSLBMX009 of Shakti and equavalant of Philips,Bajaj, Crampton, Havells and HPL.

S & F in replacement of 10 watts Surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency all as specified & directed. Cat Part No: INTEGRANEOSURFACEDLS10WLED840S of Havells and equavalant of Philips,Bajaj, Crampton, Havells,Luker and HPL.

S & F in replacement 7 Watt LED bulb high power low heating superflux LEDs, 100 lumen/ watt, 120-270 V AC inbuilt electronic driver, complete all as specified. Cat Part No : Adore 7W E27 WW and equavalant of Havells/Philips/ Bajaj/crampton/HPL

M&L for sub main wiring with two runs of single core PVC insulated multistranded unsheated FRLS cable 4.0 sqmm (nominal area) 1100 Volts grade copper conductor with one run of 2.5 sqmm PVC insulated unsheated single core copper conductor multistrand 1100 volt grade as a earth wire drawan into and including PVC casing caping with accessories of suitable size as required and all as directed by engr-in-charge.

M&L for sub main wiring with two runs of single core PVC insulated multistranded unsheated FRLS cable 4.0 sqmm (nominal area) 1100 Volts grade copper conductor with one run of 2.5 sqmm PVC insulated unsheated single core copper conductor multistrand 1100 volt grade as a earth wire drawan into and including concealed PVC Rigid Non-Metallic conduit with accessories of suitable size as required and all as directed by engr-in-charge.

M&L for sub main wiring with two runs of single core PVC insulated multistranded unsheated FRLS cable 6.0 sqmm (nominal area) 1100 Volts grade copper conductor with one run of 4.0 sqmm PVC insulated unsheated single core copper conductor multistrand 1100 volt grade as a earth wire drawan into and including PVC casing caping with accessories of suitable size as required and all as directed by engr-in-charge.

S & F in replacement PVC switch board of size 10X8 cm with arrangement to accommodate switch/socket/regulator complete all as specified.

S & F in replacement PVC switch board of size 7X4 cm with arrangement to accommodate switch/socket/regulator complete all as specified.

S & F in replacement PVC switch board of size 4X4 cm with arrangement to accommodate switch/socket/regulator complete all as specified.

S & F in replacement of PVC Block for fluroscent fittings in shape of round/ Square complete all as specified.

M&L for Earthing complete with Galvanised steel earth plate electrode 60 cmx 60 cm x 6.3 mm thick buried bellow ground level connected to galvanised earth lead directely in ground earth pit not less than 3.20 mtr deep wire 4.0 mm dia by means of bolts , nuts, check nuts, and washer of galvanised iron or steel all as shown in electrical plate No-3 SSR Part-1 of 2009 connecting to earthing test point all as specified and directed ,including necessary excavation and earth work in any type of soil ,concret pit CI frame and cover with locking arrangement all as specified and directed by Engr- in- charge.

Taking down ceiling fans of 1200 mm sweep of any make dismantling/open fan for rewinding with super enamelled copper winding wire suitable guage and after cutting the old burnt winding and cleaning the slots including varnishing and replacement of flexible cable 23/0.0076 mm to the required length including making connection and testing complete and re-fixing in same position all as specified and directed by Engr-in-charge

All as per item no 44 above but 1400 mm sweep

All as per item no 44 above but exhaust fan 275 to 300 mm sweep

All as per item no 44 above but exhaust fan 350 to 450 mm sweep

All as per item no 44 above but wall mounted fan 400 mm sweep

S&F in repair Ball bearing to match the existing size of ceiling fan sweep 1200/1400mm including greasing all as specified.

M&L in repair Fan capacitor 2.5 mfd for ceiling fan 1200 mm all as specified.

M&L Fan capacitor 4 mfd for exhaust fan all as specified and as directed by Engr-in-Charge.

S&F in replacement of canopy for ceiling fan 1200/1400mm sizes and all as specified and as directed by Engr-in-Charge.

S&F in replacement of MS blades suitable for 1200 / 1400 mm sweep ceiling fan complete all as specified.

M&L for spray painting of ceiling fan of any make/sweep with white synthetic enameled paint after preparation of old surface by cleaning with soap/detergent and drying of white synthetic enameled paint including writing of MES No. with black synthetic enameled paint with existing pattern all as directed by Engr- in- charge

M&L for spray painting of Exhaust fan of any make/sweep with white synthetic enameled paint after preparation of old surface by cleaning with soap/detergent and drying of white synthetic enameled paint including writing of MES No. with black synthetic enameled paint with existing pattern all as directed by Engr- in- charge

S/F in repair Meter box 2mm thick MS sheet powdr coated of size1mtr x 1mtr X 0.25mtr split in two parts 0.4X 1 mtr on top for refixing the meters and .6X 1 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as the MCBs can be operated from out side including Removing and refixing of meters(4 Nos) and supply and fix the following:- Switch Fuse unit TPN-32 Amps 240 V-01 Nos MCB SPN 240 Volts 40 Amps including connections complete from electric meter - 04 Nos Note:Rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators Etc and making good the disturdbed surface to match with the existing.

Supply and fix in repair Change over switch 415V in shet metal enclosures 4 pole 63 Amps OF CAT NO COS4FP63 OF HPL or equivalent of Standard and Indoasian.

S & F in repair Change over switch 415V in shet metal enclosures 4 pole 160 Amps OF CAT NO COS4FP100 OF HPL or equivalent of Standard and Indoasian.

M & L for Painting the Panel boards/DB Boxes/covers/DG Set/Accoustic Enclosures as required at site after scraping out completely the old paint with sand paper and painting one coat of redoxide primer and two coats of synthetic enammel paint including carrying out minor welding works if required as directed by the Engineer in charge. Make : Asian, Burger, Nerolac and Dulux paints NOTE:Colour of paint shall be decided by the Department

Cutting & trimming of tree trunks/ branches having girth not more than 50 mm, falling on or likely to fall on LT over head electrical line for clearence of 3.0 meter on ground from the nearest conductor/pole /earth etc & disposal of unservicable materials to distance not exc.50 mtrs & clearing of site all as directed by Engr -in-Charge.

Om Sai Enterprises

Shri Sai Electricals

M/S kirpan Enterprises

S.M.Sales Corporation

shri yash enterprises

metro electrical services

S Y Itkar Construction and Company