Improvement Augmentation of Water Supply Scheme group of villages Pichhlihar, Hurang, Mandalgarh, Shirar, Benchi, Devgarh, Raison, Bandrol, Nallach, Jindour and Banogi in Tehsil and District Kullu (H.P.)

Amount

Excavation in foundations, trenches etc. in all clasification of earth work such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling/wedging out of hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost to the entire staisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including all leads and lifts and as per entire satisfaction of Engineer - in - charge. .

Providing and laying cement concrete 1:1½ :3 ( 1cement: 1 ½ sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Foundation and plinth.

Walls(any thickness but not less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.

Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.( Roof any shape and size).

Providing Tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete including the cost of binding wire including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Providing form work of ordinary timber plankings so as to give a rough finish including centering, shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for in situ reinforced concrete and plain concrete work in arches exceeding 6 mtrs. span.(In dome roof of tank any shape and size)including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Providing form work with steel plate 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mts. and removal of the same for insitu-reinforced concrete and plain concrete work including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness.

Vertical surfaces such as walls (any thickness), partitions and the like including attached plasters, buttresses, plinth and string cources and the like including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Providing and fixing steel/fibre CSRC man hole cover and frame confirming to IS-12592-Part-II 1990 with latest amendments.(500 mm dia meter medium duty)

Providing and fixing tank vent ppe of 0.75mtr. Dia and 0.60mtrs, in hight consisting of RCC 1:2:4 support frame and dome top cap procided with MS square vertical bar screen of 6mm dia, 0.075 mtrs centre to centre coovered with mosquito proof G.I. wire mesh etc. including all leads and lifts and as per entire satisfaction of Engineer - in - charge.

Fixing of GMS tubes of following dia in walls, floors etc. including tube fitting and maing the wall, floors etc. pipe light grade for Inlet,outlet and over flow as per entire satisfaction of Engineer - in - charge.

Inlet pipe 65mm dia

Inlet pipe 80mm dia

Outlet pipe 100mm dia

Providing and fixing Gun metal valve of approved make as per entire satisfaction of Engineer - in - charge.

80mm dia

Providing and fixing scouring arrangement from storage tank in a length of 5 meters consisting of flanges pipe/nipple of with 100mm ida from stoarge tank jointed with flanged sluice valve of Kirloskar.Leader/BHEL/Kartar/all approved make as per entire satisfaction of Engineer - in - charge.

100mm dia PN-1

ROOM SINGH CONTRACTOR