Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC 21 NEAR LAL KOTHI CHANDER NAGAR SAHARANPUR UP 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹32.9 L+₹13,698 (0.42%)Rejected-Finance | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹35.0 L+₹2.2 L (6.69%)Rejected-Finance 362 SUBHASH NAGAR PO CLEMENT TOWN DEHRADUN UTTARAKHAND | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹36.9 L+₹4.1 L (12.5%)Rejected-Finance PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L4 | Rejected-Finance Being 4th lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
CERTAIN REPAIR TO JCO/ OR MD ACCN IN TANK AREA AND INDIRA COLONY AND MAP PH-II UNDER GE CLEMENT TOWN, DEHRADUN
2022_MES_528172_1
GE/CLT/ Of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE Clement Town
Class D Cat (i)
7 documents required · 7 mandatory
₹500
Yes
GE Clement Town
₹80,000
Yes
13 Oct 2022
2 Jun 2022
23 Jul 2022
3 Jun 2022
21 Jul 2022
25 Jun 2022
Amount
Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa and 150AZ as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and as directed.
S&F of 0.63mm thick plain galvanised iron sheets using grade of zinc coating 120 inclusive of both sides in ridges, hips, valley gutters, drip and straight flashings etc, fixed in any pattern complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for false ceiling with semi perforated 12mm thick micro triangular edged at all heights with GRG (glass fiber reinforced gypsum) false ceiling tiles of size 595x595 of approved texture design and pattern having moisture content less than 2%, humidity resistance of 99%, NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475 (Part-IV 1970 and light code description unit rate No 429 sub head 26.0 new technologies and material) reflectance of 85% minimum to laid in true horizontal level suspended on interlocking metal 'T' grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120gms per Sqm) including both side comprising of main 'T' runner of size 15x32mm of length of 3000 mm, cross 'T' of size 15x32mm of length 1200mm and secondary intermediate cross 'T' of size 15x32mm of length of 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised metal sheet item (galvanised @ 80gms per Sqm) i.e. 50mm long 8mm outer diameter M-6, fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjusters of size 85x25mm galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on perimeter of wall/partition with the help of plastic rawal plugs at 450mm center to center and 40mm long dry wall screw. The work shall be carried out as per specification and complete all as specified and as directed. Make : Diamond ceiling/Gypcore/Maruti Gypsum/Shera
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4. Tiles shall be conforming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and as directed. Note : Shade of the tiles including colour, design and pattern shall be got approved by GE.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6. Tiles shall be conforming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and as directed. Note : Shade of the tiles including colour, design and pattern shall be got approved by GE.
M&L for Non Skid coloured ceramic tiles 8 to 9 mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6). Tiles shall be conforming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and as directed. Note : Shade of the tiles including colour, design and pattern shall be got approved by GE.
M&L for Non Skid coloured ceramic tiles 8 to 9 mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles. Tiles shall be conforming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and as directed. Note : Shade of the tiles including colour, design and pattern shall be got approved by GE
M&L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15mm thick screed in CM (1:6), set and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing incl rounding the edges complete all as specified and as directed.
M&L for white marble 16 to 18mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.
M&L for machine cut Kota stone slab 10-12 mm thick as in skirting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and as directed.
M&L 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) laid in panels as in flooring including finishing top surfaces even and smooth without using extra cement complete all as specified and as directed.
S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slab and shelves supported on walls complete all as specified and as directed.
M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L Baroda green marble 14 -16 mm thick (table rubbed and polished ) in step, jambs, pillers , window cills, cooking plateforms and the like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and as directed.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick cement plaster in CM (1:6) on fair face of brick or concrete walls finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying two coats of interior acrylic emulsion over a coat of wall care putty on walls complete all as specified and as directed.
M&L for 5mm thick plaster in ceiling of CM (1:3) on brick walls finished even and smooth without using extra cement complete all as specified and as directed.
M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.
M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and as directed.
M&L for applying two coats of exterior acrylic emulsion after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall complete all as specified and as directed.
M&L for applying two coat of acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and as directed.
S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and as directed. Make : ZIM/Coronet/Essco
S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and as directed. Make : ZIM/Coronet/Essco
S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. Make : ZIM/Coronet/Essco
S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including C.P. brass coupling and PVC waste pipe complete all as specified and as directed. Make : Cera/Hindware/Parryware
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with CI 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and as directed. Make : Cera/Hindware/Parryware
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and as directed. Make : Cera/Hindware/Parryware
S&F in repair double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and as directed. Make : Polycon/Rotomac/Sintex
S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. Make : Pearl/Prayag/Shakti
S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and as directed. Make : Blue Star/Prayag/Pearl
S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed. Make : Prayag/Shakti/Pearl
S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and as directed. Make : Prayag/Shakti/Polytuf
Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and as directed.
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repair galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F in repair of 20mm dia MS drapery rod, fancy type, powder coated wood finish, wooden knobs and brackets, fixed in any length complete all as specified and as directed.
S&F in repair 18 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and as directed.
S&F in repair 6 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with stainless steel screws and solvent cement/ adhesive to make Cupboard/Kitchen back and sides complete as per manufacturer’s instructions complete all as specified and as directed.
S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and as directed.
S&F galvanised iron sheet 1.2mm thick cut in circular shapes of size 450mm dia and bent to the shape of cover of PVC overhead tank with edges turned. Spikes made of 1.2mm thick GI sheet cut in 'U' shaped (sharped edged per sample) shape with sharp edge, bent and fixed to circular sheet with rivets at 100mm c/c spacing bothways. The sheet with spikes shall be fitted to overhead tank with 4 Nos self tightening screws complete all as specified and as directed.
S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and as directed. Make : Kisan/Prince/Supreme
S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and as directed. Make : Kisan/Prince/Supreme
S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and as directed. Make : Kisan/Prince/Supreme
S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and as directed. Make : Kisan/Prince/Supreme
S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as specified and as directed. Make : Kisan/Prince/Supreme
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
PANWAR CONSTRUCTIONS
KAPOOR ELECTRICALS
RADHA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .