Special Repair/renovation of Senior Mess in Moti Lal Nehru School of Sports, Rai Distt. Sonipat. (Re-invite)

Amount

Removing doors with chowkats by making recesses in wall when the wall is not to be dismantling of walls.(HSR 8.18)a Doors

Windows

Dismantling white glazed tiles.(HSR 8.38)

Dismantling brick or flagged stone slab flooring with Concrete base. (HSR 8.27)

Dismantling Concrete 1:2:4 (HSR 8.6)(d)

Dismantling first class mud roofing tiles (HSR 8.8)(a)

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.(HSR 13.13)

Cement concrete 1:1 ½ :3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.81+10.95a)

Providing and Laying Pre-polished Granite stone 17 mm & above (Colors like :- S-White, Steel Grey, Tan Brown, Marigold, crystal Blue, Rajasthan Black, Copper Silk) in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. (NS).

Providing and Laying Pre-polished Granite stone 17 mm & above Like :- S-White, Steel Grey, Tan Brown, Marigold, crystal Blue, Rajasthan Black, Copper Silk in skirting/dados, risers of steps, pillars, wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. (NS).

Scraping of cement plaster. (HSR 8.32 )©

First class brick work laid in cement sand mortar 1:6 in foundation and plinth.(HSR 11.2)

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall (HSR 15.12)

Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth. (HSR 10.26)

Kotah stone flooring minimum 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing & fixing G.I. colour coated Galvanized Metal sheet roof of 0.50mm (TCT) thick rib profile precoated galvanized trapezoidal sheet having minimum pitch of 50mm C/C ( .N.S.)

Cement concrete 1:1 ½::3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.(HSR 10.86+10.95a)

Steel reinforcement TMT Bar FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including strengthening bending, binding wastage, overlaps, welded joints spacer bar, Chairs, stays, hangers and annealed steel wire etc, and placing in positioncomplete in all respect for all height /depths/ storeys/ basements etc. (Note- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement). (HSR 18.22)

Supplying, hoisting and placing in position Tubular trusses including runners, purli Consisting of steel tubes conforming to I.S.Specifications of tested quality duly welded With fillet welds 6mm thick throughout Including wind bracing. Open end of pipe Sealed with 3mm thick plate including the Cost of nuts.(HSR 18.14)

Providing and fixing aluminium works for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS: 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and paneling to be paid for separately)(HSR 17.96)+Note-i

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR 10.28)

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partition etc with PVC/ Neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items).(HSR 17.98)(b)

Providing & fixing Ist quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR 14.92)(b)300x450mm

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,& RAK, SIMPOLO,ORIENTBEL. Double charged tiles shall be used. (N.S)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size in pavements, roads laid to required slop and camber, including consolidation, finishing and tamping complete. (HSR 10.132)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81). Through Rate

Providing and Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface. (Note- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25). Through Rate

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (Note- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.30) Through rate

Carriage of material lead more than 0.48 Km (HSR 5.2+4.1 (a))

Public Health Items:- Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a)]. (i) Stop cock Male & female end.

(ii) 15mm concealed stop cock with flange.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc (DSR 18.10) 20mm internal diameter of pipeline

25mm internal diameter of pipeline

32mm internal diameter of pipeline

Providing & Fixing in position best indian make (ordinary) lavatory suites consisting of- (v) Size 560 mm x 450 mm with one no. tap. [HSR 30.41 a(vi)].

Providing & fixing towel rails.(HSR 30.68)(e)

Providing & f ixing best Indian make beveled edge 5.5mm thick mirror.(HSR 30.71) (a) (ii) 530mmx430mm single colour.

Providing & fixing in position 15mm i/d C.P.Brass bib cock.(N.S.) Jaquar Make (a) Long body.

© Bib cock

Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. [HSR 30.119]. 2000 Ltrs. Capacity Water Tank

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. [HSR 13.89]. Note- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. a)100mm

b) 150mm dia PVC pipe

Providing & fixing D.I.Double seal Main hole cover and frame of 610mmx610mm.(HSR 28.59)

Providing & fixing in position best Indian make flexible tube connection.(HSR 30.82)(b (b) C.P. Brass (iii)15mmx450mm

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL DRAINING BOARD WITH IRON BRACKETS FOR BUILDING into wall INCLUDING PAINTING, CUTTING AND MAKING GOOD THE WALLS etc(HSR 30.58)(a)Sink size 600mmx450mm

Providing & Fixing brass ball valve.(N.S) a) ½”

Providing & fixing P.V.C. Waste pipe(N.S.)

Providing & fixing in best Indian make soap dish fixed into wall .(HSR 30.70)(a)(i) (a) C.P. Brass (i) Soap dish 160mm

Providing and fixing PVC Bend ISI Mark. (Note- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. [HSR 13.90]. Note- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. (a) 100 mm Dia PVC band

b) 150mm dia PVC Bend

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (DSR 18.7) 20 mm nominal outer dia Pipes (DSR 18.7.2)

25 mm nominal outer dia Pipes (DSR 18.7.3)

32 mm nominal outer dia Pipes (DSR 18.7.4)

Providing and fixing PVC pipe specials(N.S.) (a) 100mm dia (i) PVC Tee

(ii) PVC door tee.

(iii) PVC floor Trap

(iv) PVC P-Trap

(v) PVC cowl.

(vi) PVC Door bend.

(b) 150mm dia (i) PVC Tee

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design.(HSR 29.84)(a) size 450mmx450mm

CUTTING HOLES UPTO 23 CM SQUARE THROUGH BRICK WORK IN MUD WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required.(HSR 28.23) (a) 11.43 cm thickness of walls

(b) 22.86cm thickness of walls

(c) 34.29cm thickness of walls

BAILING OUT WATER FROM THE TRENCHES FOR MAKING NEW CONNECTIONS IN FULLY CHARGED PIPE-LINES including cleaning, trimming and dressing the trenches to correct alignment and gradeas required by the Engineer-in-charge.(HSR 28.47) up to 200mm i/d

CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95) (a) Size 75 mm x 75 mm

(b) Size 150 mm x 150 mm

Providing & fixing 1” C.P. Hand shower for cleaning of pots i.e. patila,steel plate etc. (N.S.)

Providing & fixing pressure pump in water storage tank for cleaning of pot i.e. patila, Bhigona & plates etc. Crompton make 1 H.P.(N.S.)

CONSTRUCTION OF RECTANGULAR STANDARD BRICK MASONRY MANHOLE CHAMBERS to standard drawings on S.W pipe sewers or other circular pipe sewers upto the required depth in 1.5 CEMENT SAND MORTAR, lime concrete in bed and sides of pipe sewer and cement concrete 1:2:4 in benching, 12 mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finished with 2 coats of sodium solicate on interior surface where required, reinforced cement concrete slab 180 mm thick fixing 560 mm internal diameter C.I. manhole cover and frame weight not less than 2.5 quintal painted with 3 coats of black bitumen paint, fixing galvanised malleable iron steps embedded in 1:2 cement sand mortar complete. The rate cover the cost of M.S steel for R.C.C slab Labour for fixing and carriage of C.I manhole frame and cover and malleable iron steps from the stores of the Engineer-in-charge of the works to the site of works. The rate also includes the cost of accurately planned and fitted centring, supports for all works as well as for all curves and special work, cleaning out their beds etc. Sodium silicate shall be supplied free of cost at the stores of Engineer- in-charge. [HSR 29.90 Xi) a.

Providing & fixing 15mm CP brass laboratory cock swan neck of best quality (to the approval of Engineer-in-Charge) (HSR 30.78) b two way

Recovery item The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Dismantiling of bricks and Removing of Door and windos in the DNIT. In case it is not possible to use this material on the work, the agency can take away this material after approval from employer. This material will be issued at the price quoted by the agency. However the reserve price is as under:- Doors @200/- each

Window @250/- each

Brick bats @ 450/- per cum

Steel @20/- per kg. Note:- 1. In case of any difference in the unit & nomenclature of any of the HSR/DSR Items of Civil, P.H. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make/brand exhibited in HSR/DSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items/works at site.

M/s Ahmed Builders

Sheoran Brothers