EC 07 SDF TOI Etender 19 20 47

Amount

Taking out vitrified / ceramic / Mirzapur or glazed porcelain tiles with morters carefully by chiselling from walls or floor and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. At all floors.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. At all floors. Sizes, colors, design & textures will be decided by EIC.

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes, colors, design & textures will be decided by engineer of WBEIDCL. Gr. floor.

1st floor

2nd floor

Removal of existing false ceiling (including board & frame work) & disposal of the boards only beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site & store the frame (GI / Al) part inside the premises as per direction of Engineer in charge.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling at all floors (with 6mm thick Fibre Cement designer Ceiling Board and E-Grid T-2430). Design & textures will be decided by engineer of WBEIDCL. At any floor & any location.

Supplying, fitting & fixing of solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position, anodized aluminum aldrop (250mm x 16mm dia bolt), aluminum tower bolts (200 mm), anodized aluminum 'D' type handle (150 mm) on both sides, cost of hinges and other fittings. 32 mm thick shutters (single leaf). At all floors.

Supply, fitting & fixing of Godrej Hydraulic door closer. Heavy type.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame inluding cost of concrete, Iron Butt Hinges and M.S clamps, etc. The rate is inclusive of removal of old existing PVC / Wooden door frames & shutters and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Wood : Sal (Local). Gr. floor.

1st floor

2nd floor

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks, PVC connector, CP over brass spreader, dome shaped CP waste grating of 32 mm complete. Size 635 mm X 395 mm X 420 mm. Model number, color, design will be decided by WBEIDCL.

Supplying, fitting and fixing E.W.C. at existing line in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts, seat cover etc. With 'S' / 'P' trap as applicable. Model number, color, design will be decided by WBEIDCL.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. The rate is inclusive of removal of old cistern & disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Model number, color, design will be decided by WBEIDCL.

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. Size 450 mm X 350 mm. The rate is inclusive of removal of old existiong squatting plate & disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Model number, color, design will be decided by WBEIDCL.

Supplying, fitting and fixing white vitreous china best quality approved make pedestal type wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connector pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint & Supplying, fitting and fixing pedestal of approved make for wash basin. Pillar cock jaquar make. Model no PRS-031 of Jaquar or as decided by EIC.

Supplying, fitting and fixing of Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. PRS-077 of Jaquar or as decided by EIC).

Supplying, fitting and fixing of Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. FUS-CHR-29053 of Jaquar or as decided by EIC).

Supplying, fitting and fixing of bib cock with wall flange. Chromium plated Bib Cock (Equivalent to Code No. FUS-29037 of Jaquar or as decided by WBEIDCL).

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 600 mm X 450 mm.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials, chase cutting in walls & repairing the same.). 15 mm dia. medium quality. Concealed work.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials, chase cutting in walls & repairing the same.). 20 mm dia. medium quality. Concealed work.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials, chase cutting in walls & repairing the same.). 25 mm dia. medium quality. Concealed work.

Supplying, fitting and fixing towel rail with two brackets. C.P. over brass. 25 mm dia. and 600 mm long. Design will be decided by EIC.

Supplying, fitting and fixing of CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No 29041 of JAQUAR or as decided by EIC) & Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No ALD-573 of Jaquar or as decided by EIC).

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding, louvered & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). Louvered window. Top, bottom and side member.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In Charge. (Payment will be made on finished length of the work). Louvered window. Louvered Section.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). Louvered window. Cleat Angle.

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. , glass, neoprene / EPDM gasket, locking arrangement and rollers. Louvered window. The rate is inclusive of removal of existing aluminum / MS windows from the wall, store at some designated place & repair all the damages of the wall & disposal of the glass beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Supply, fitting & fixing of frostet glass of approved make and brand in aluminum louver / windows conforming to IS: 2835-1987. 5mm thick.

Supplying, fitting and fixing liquid soap container. Chromium Plated. Sizes, design & model will be decided by EIC.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor & disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Labour for dismantling G.I. pipe with fittings. 15 mm & store at some places inside the premises as decided by the EIC.

Labour for dismantling G.I. pipe with fittings. 20 mm & store at some places inside the premises as decided by the EIC.

Labour for dismantling G.I. pipe with fittings. 25 mm & store at some places inside the premises as decided by the EIC.

Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished. Size, texture & color will be decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. The rate is inclusive of carefully removal of the old existing valve from the pipeline & store at some places in the premises as decided by EIC. At any floor.

Dismantling & removal of urinals and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Carefully dismantling & removal of EWC without damaging of existing floor & CI line and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Dismantling & removal of IWC including foot rest and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Dismantling & removal of Wash Basin and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Dismantling & removal of Pillar Cocks & store at some places inside the premises as directed by Engineer in Charge.

Dismantling & Removal of Angular stop cocks & store at some places inside the premises as directed by Engineer in Charge.

Dismantling & Removal of Bib cocks & store at some places inside the premises as directed by Engineer in Charge.

Removal of rubbish,earth, tiles, marble, boken sanitary items, fale ceiling boards etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Rendering the Surface of walls and ceiling with WATER PROOF wall putty, compitable with acrylic paint of approved make & brand.(1.5 mm thick). At any floor & any location.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly with rendering or cement mortar (1:2) (as necessary), complete removal of old paint of any kind and as per direction of the EIC. One Coats. Water based interior grade Acrylic Primer. At any floor & any location.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats. Two coats. Standard Quality.Color will be decided by the engineer of WBEIDCL. At any floor & any loaction. Color scheme will be decided by EIC.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. With 1:6 cement mortar. 15-20 mm thick plaster. Gr floor.

1st floor

2nd floor

Supplying, fitting and fixing of toilet paper holder of approved make. Roll type size 250 mm X 125 mm. Design & model will be decided by EIC.

Dismantling all types of masonry excepting cement concrete plain or reinforced, including removal of rubbish from the working site and disposal of the same beyond the WBEIDCL compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Gr. floor.

1st floor

2nd floor

Dismantling R.C. floor, roof, beams etc. including cutting rods and removal of rubbish from the working site and disposal of the same beyond the WBEIDCL compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Gr. floor.

1st floor

2nd floor

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. At any floor & any location.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On timber or plastered surface. Two coats. At any floor & any location. The color scheme will be decided by EIC.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

1st floor

2nd floor

Supplying, fitting & fixing Aluminium domical grating & removal of old one. 125 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). For exposed work. 100 mm. At any floor & any location.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). For exposed work. 150 mm. At any floor & any location.

Labour for dismantling GI / PVC/ CI pipe with fittings. 100 mm. At any floor & any location.

Refixing GI / PVC/ CI pipe with fittings after cleaning where necessary. 100 mm. At any floor & any location.

Super Quality Construction

NUNDYS