Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹17.4 L+₹9,137.22 (0.53%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹17.8 L+₹49,519.68 (2.86%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹18.7 L
EMD Value
₹30,000
Closing Date
20 Dec 2021, 5:00 pmClosed
Executive Engineer Agri Alappuzha
O/o Executive Engineer Agri Sanathanapuram PO Kalarcode Alappuzha 688003
Scheme 2021-22- Development of fruit plants, flowers, medicinal plants- strengthening of farms - construction of Rain Shelter at DAF KOZHA
2021_AGRI_459970_1
EE(2) 1066/2021
Open Tender
Civil Works - Others
Item Rate
365 days
DAF Kozha
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,500
₹30,000
Yes
25 Jan 2022
13 Dec 2021
22 Dec 2021
13 Dec 2021
20 Dec 2021
13 Dec 2021
Amount
Rain shelter (RSI)15x7.5sqm and (RSII) 38x6sqm
od2925/2021_2022 : Observed Data :Removing the damaged UV sheett from the top of the shade house
od2926/2021_2022 : Observed Data: Dismantling G.I. pipes ( external work) manually including stacking of pipes within 50 metres lead as per direction of Engineer- in- Charges:<br>15 mm to 40 mm nominal bore
od2928/2021_2022 : Observed Data: Removing the damaged shade net from the top of the shade house
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
od2935/2021_2022 : Modified Spec 7.1.Random rubble masonry with hard stone in foundation and plinth up to plinth level with:<br>Cement mortar 1:6 (1 cement : 6 coarse sand)
60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
60.7.8 : DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site
5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
od252/2021_2022 : Observed Data--Supplying and laying UV stabilized polyethyelene film 200 micron thick, IR blocking , Ant drip/fog , diffused multilyer on the truss work with aluminium locking profile with zigzag springs galvanised with hex washer
od253/2021_2022 : Supplying belt Curtain 25 mm width for UV film tightening
od254/2021_2022 : providing agro shade net with nylon wire including all cost of materials and labour charges etc complete.
od2994/2021_2022 : Providing and laying 12.5*12.5 mm 14*14 g or nearest available size welded G I mesh for using side protection and tying in 1 mm or nearest G I wire /welding including all cost of materials and labour charges etc complete
od255/2021_2022 : Supplying and laying 40 mesh insect proof netting sufficient to cover the sides and vents including all cost of materials labour charges etc.complete.
od3129/2021_2022 : Supplying and providing HDPE square rain water gutter 160mm width,4mm thickness or nearest available and essential accessories
National Biotech
XAVIER C M
Bidder Name
SUNIL M
XAVIER C M
National Biotech
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_658327.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .