GEJM-62/19-20

Amount

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars etc and removing all the demolished material outside Cantt area complete all as specified.

Taking down cement plaster of any description on brick/stone/concrete wall including racking out joints, hacking for key, scrubbing down with water and removing all the demolished material outside cantt area complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and brushing surface with neat cement slurry with 3.0kg of cement per sq. metreremoving serviceable tiles to store and rubbish off the cantt area complete all as directed.

Taking up or down GI tubing and connection incl cleaning for refixing or removal bore of pipe 15mm dia complete all as specified and directed.

Taking up or down GI tubing and connection incl cleaning for refixing or removal bore of pipe 20 mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material outside cantt area complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work) complete all as specified.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified.

Dismantling of CGI plain or corrugated sheeting, any gauge, thickness, including nanital or similar pattern roof covering.

Dismantling of AC plain or corrugated sheeting, any gauge, thickness, including nanital or similar pattern roof covering.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the cantt area complete all as directed.

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises complete all as specified and as directed by Engineer-In-Charge.

Surface dressing n exc 15cm deep and getting out in any type of soil complete all as specified.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, all as specified.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge.

Excavation in trenches, not exceeding 1.5 mtr wide, exceeding 1.5 mtr but not exc 3.0 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge.

Spreading and levelling in layers n exc. 25 cm thick,watering and well ramming in layers as in floors with earth obtained from excavation complete all as specified and directed by Engineer-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials/ soils, to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.

Material and labour for ATT treating backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per sqm of vertical surface area

Material and labour for ATT treating under the soil surfaces of plinth protecion at the rate of 5 ltrs of emulsion per sqm of surface area

Material and labour for ATT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

Material and labour for ATT treating the top surfaces of filled earth at the rate of 5 ltrs of emulsion per sqm of surface area

Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for hardcore of broken stone of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick watered and well rammed to a true surface, complete all as specified and directed

Material and labour RCC (Design Mix) M-25 as in beams , cantilevers, bressummers, lintel over 1.5 m span completed all as specified ad directed.

Material and labour RCC (Design Mix) M-25 as in in slabs supported on walls beams and clumns in floors, roofs, landings, balcony, canopies, deck slabs and in slaves and like..

Material and labour RCC (Design Mix) M-25 as in columns, pillars, piers, posts and struts etc complete all as specified and directed

Material and labour RCC (Design Mix) M-25 as in beams , cantilevers, bressummers, lintel over 1.5 m span completed all as specified ad directed.

Material and labour for RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns complete all as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4) complete all as specified.

Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-In-Charge.

Material and labour for hardcore of broken stone of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick watered and well rammed to a true surface, complete all as specified and directed

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4 complete all as specified and as directed by Engineer-In-Charge.

Material and labour for damp proof course 40mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) to horizontal or vertical surfaces including necessary formwork with water proofing compound, WPC measured & paid seprately) finished even and smooth without using extra cement complete all as specified and directed.

Machine pressed precast concrete interlocking paver block coloured with glazed finish (Laqquere finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade (with grey cement and no pigment) laid dry over and including sand cushion of average thickness 25 mm duly consolidated,set and levelled complete all as specified and as directed by Engineer-In-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds,mitred/stopped ends etc complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to sides of pillars, posts, struts, pier, column square, rectangular or polygonal rough finished surface of concrete

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves etc for rough finished surface of concrete.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail­ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon­tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail­ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon­tal or sloping and similar work exc 5 cm but n exc 10 cm wide for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Material and labour for PCC 1:2:4, 25mm thick type B-0 using 12.5mm crushed stone aggregated as in floor finished even and rough all as per specified and directed.

Plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), 75mm thick, as in path,pavings,hardstanding, plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all as specified and as directed by Engineer-In-Charge.

Material and labour Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified and directed

Material and labour for plain cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in surface channels and drains including necessary formwork complete all as specified and directed.

Material and labour for applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement complete all as specified and directed

Rendering 15 mm thick on concrete surface over roofs in cement mortar 1:4 finished even and smooth without using extra cement on walls/floors including mixing of water proofing compound complete all as specified and as directed by Engineer-In-Charge. (WPC shall be measured and paid for separately)

Applying roof treatment as below:-- (i) Applying 1st coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely (ii) Applying 2nd course of a coat of blown type bitumen of grade 85/25 heated to a temperature of 180 degree centigrade and applying @ 1.2 kg/sqm completely (iii) Applying 3rd course of Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite Note : Ponding shall be done over RCC slab by filling water which shall be kept for 48 hours.In case a slightest indication of seepage / leakage is noticed the same shall be rectified by grouting the affected portion at no extra cost.Thereafter ponding test shall be repeated till there is no indication of seepage /leakage before application of roof treatment.A proper record of ponding test of RCC slabs shall be maintained by Engr in Charge.The arrangement of ponding test shall be made by the contractor and shall be included in the quoted rates..

Supply and fixing in repairs Pressed steel frame (factory made) of size 125x60mm for doors with double rebated including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc., complete as specified, supplied and fixed including back filling of chowkats in PCC 1:3:6 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spd and as directed.

Material and labour 35 mm thick 2nd class hard wood plain framed panelled shutter (two panels) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial vace veneering on both faces including wooden beads on both sides, one coat of pink primer. The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated complete all as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as directed.

Supply and fixing Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed by Engineer-In-Charge.

Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

Supply and fixing aluminium anodized door handle size 150mm size of extruded section complete all as specified and directed.

Supply and fixing mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

Supply and fixing Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

Supply and fixing Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 300mm size.(ISI marked)

Supply and fixing 300mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and fixing secondclass hardwood cleats,small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary’ labours; articles n exc 200 cu. cm each

Material & labour Aluminum Powder coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 5.50 mm thick coloured/tinted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung including pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Supply and fixing Aluminium alloy, anodised, sliding door bolt size 250mm (length of bolt) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete al as specified. (ISI Marked)

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

Supply and fixing Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, holdfast and stackclamp,guard bars, manhole cover,gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Round bars 10 mm dia and over upto and including 10mm dia as in hooks of manhole cover,rungs etc complete all as specified and directed by Engineer-In-Charge.

Mild steel framed work as in barren doors or gates of angle ornamental type consisting of prefabricated ornamental designs and for portions framed and hung as in gates including pintle hinges,stops,hand made sliding etc and hanging; also fastening and fixing complete and similar work conforming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed by Engineer-In-Charge. Note :- Prefabricated ornamental designs/shapes shall be decided as per sample approved by GE

Supply and fixing Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with stainless steel wire staples

Material and labour for rendering 5mm thick on concrete surfaces as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement..

Providing precast cement concrete type B0 1:2:4 (using 12.5mm graded aggregate) in louvres and jallies,25mm thick (measured solid), including all mouldings set in cement mortar 1:4 complete including taking down or dismantling old as found at site all as specified and as directed by Engineer-In-Charge.

Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.(including all scaffolding,lifting arrangement for three story building on exteral surfaces)

Material and labour for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.(including all scaffolding,lifting arrangement for three story building on exteral surfaces)

Material and labour Non - skid Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match the surface over and including 15mm thick screed bed in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

Material and labour glazed ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10 mm thick rendering in CM 1:4 all as specified. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

Machine cut kota stone slab, (minimum size shall be 550x550mm), flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, laid over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

Machine cut kota stone 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, , set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tiles over and including 10mm thick rendering in cement mortar 1:4, as in verticle surfaces complete all as specified and as directed by Engineer-In-Charge.

Material and labour 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

Material and labour Vitrified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in C:M 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)

Description all as item no 90 but as in verical surfaces such as dado/skirting over and including backing coat of CM 1:4,10 mm thick complete etc.

Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old decorated surfaces of ceilings to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old decorated surfaces of walls to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered surfaces of wall and applying two coat of cement base paint including a base coat of primer surface complete all as spd

Preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 2 to 3 mm thick and one coat of primer complete all as specified.

Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying two coats of distemper oil emulsion over and including one coat of primer on plastered surfaces, preparatory to distempering complete including making good uneven surface/holes with 3 mm Birla wall care putty coloured in same shade etc complete all as specified and directed.

Preparation of old decorated surfaces of walls to achieve smooth and even surface and applying two coats of distemper oil emulsion over and including one coat of primer on plastered surfaces, preparatory to distempering complete including making good uneven surface/holes with 3 mm Birla wall care putty coloured in same shade etc complete all as specified and directed.

Preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces complete all as specified and directed.

Material and labour for applying two coat of synthetic enamel paint on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper or grinding by hand grinder to make surface even and smoth and applying primer where required (up tp 4th storey with necessary scaffolding) complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

Material and labour for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Supply and fixing in repair chromium plated Bib Cock cast copper alloy, chromium plated fancy type screwed for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar, Cat No- CQT-CHR-23037 or equivalent in Kohler

Supply and fixing in repair chromium plated pillar Cock cast copper alloy, chromium plated fancy type screwed for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar, Cat No- CQT-CHR-23011 or equivalent in Kohler

Supply and fixing in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified. Make:- Jaquar, Cat No:- OPP-15059PM or equivalent in Kohler

Vitreous China wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), and PVC connection 15 mm dia 450 mm long complete all as specified and as directed by Engineer-In-Charge.

Tubular towel rail, 20mm dia, D type, 60cm long between flanges, chromium plated fixed to walls with chromium plated brass screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in Kohler

Supply and fixing in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

Supply and fixing in repair CP Overhead Shower 120mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) including shower arm minimum length 190 mm complete all as specified. Make :- Essco Cat No- EOS-542N or equivalent in Marc

Supply and fixing Angle valves cast copper alloy, chromium plated with long shank and cup (concealed type)with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair Concealed Stop valves,fancy type ,cast copper alloy,screwed down,high pressure,with long shank and cup,screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe complete all as specified.Make -Essco or equivalent in Marc

Supply and fixing in repair Stop valves,fancy type ,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe complete all as specified.Make -Essco or equivalent in Marc

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in Kohler

Supply and fixing in repair Wall Hung Basin with Fixing Accessories Set, Size : 555 x 425 x 195mm, complete all as specified. Make :- Jaquar, Cat No- CNS-WHT-811 or equivalent in Kohler.

Material and labour for Vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest with 'P' or 'S' trap (excluding flushing cistern and flush pipe) and provision of lime concrete and making good floor, all as specified.

Supply and fixing Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete, fixed in repairs all as specified and as directed.

Supply and fixing PVC urinal partition wall colour/design, size 400 x 700 x 25 mm, complete, fixed in repairs all as specified and as directed.

Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,PVC 32 mm 'L' bend of capacity 10.0 litres complete all as specified and as directed by Engineer-In-Charge

Supply and fixing 75 mm bore PVC (SWR)Type B pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or fixed with wall complete all as directed.Make:Finolex/Kisan/Supreme

Supply and fixing 110 mm bore PVC (SWR)Type B pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or fixed with wall complete all as directed.MakeFinolex/Kisan/Supreme

Supply and fixing PVC (SWR) bends any radius with oval access doors 75mm bore Make :- Finolex/Kisan/Supreme

Supply and fixing PVC (SWR) bends any radius with oval access doors 110 mm bore Make :- Finolex/Kisan/Supreme

Supplying, laying, jointing & testing galvanised iron pipe 15 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc fixed to walls or laid in floors including all fittings complete all as specified and directed.

Supplying, laying, jointing & testing galvanised iron pipe 20 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc fixed to walls or laid in floors including all fittings complete all as specified and directed.

Supply and fixing in repair PVC (SWR) junction single, (Single T) equal or unequal with oval access door( Grade " B " ) 75 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) junction single, (Single T) equal or unequal with oval access door( Grade " B " ) 110 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) reducers( Grade " B " ) 110 mm bore with grating complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Material and labour for salt glazed stone ware (SGSW) grade 'A' drain pipe of 150mm internal dia, laid in trenches on concrete bed and jointed complete all as specified and directed by Engr-in-Charge.(excavation and earth work and concrete bed shall be measured and paid for separately)

Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as concrete in bed to drain pipes for 150mm bore SGSW pipe including packing under and hunching against the sides of pipes after they are laid and tested in trenches complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

Supply and fixing in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

Supply and fixing in repair PVC (SWR) floor trap 75 mm bore type B , plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) triple layered,white,hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, including making connections complete all as specified. Make Sintex,Kissan

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 500 liters capacity, (cylindrical vertical with closed top) triple layered,white,hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, including making connections complete all as specified. Make Sintex,Kissan

TMT bars 10 mm and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.

Description all as per item No 139 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and builders.

Supply and fixing structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, (up to 4th storey with necessary scaffolding) all as specified.

Supply and fixing 4.8 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, (up to 4th storey with necessary scaffolding) all as specified.

Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Supply and fixing prepainted galvatume aluminium zinc coating (AZ-150 micron) GI based, corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 5.50Mpa as roof covering/cladding, walls, fixed with self tapping screws complete all as specified. Make : Jindal( JSW),Tata.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Supply only Water proofing compound liquid.

Septic tank for 10 users, twin chamber, (Brick construction) with top of slab in RCC 1:2:4 , including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CEPZ/C-TD/013/13 Sheet 1/5 to 5/5.

Soakage well, 1.2 mtr dia and 3.00 mtr depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundation, brick work in CM 1:4, RCC 1:2:4 Cover slab, manhole cover with angle iron frame, appropriate and suitable size brick bat filling, SWG junction 150mm bore CI vent pipe and Cowl etc. complete all as specified and as shown on drawings. (Soak well shall be constructed as per CE Pathankot Zone TD No CEPZ/C-TD/013/13 Sheet 1 to 5).

E/M ITEMS Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs to the existing surface & finish complete all as specified and as directed.

Taking down of UNSV MCB DB along with MCB's complete all as directed.

Material and labour for complete point wiring for One light/fan point controlled by one, one way switch complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing conduit terminated into suitable modular Metal sunken Boxes of Make : Havells including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- Make of wire: Havells/Polycab. Note: suitable Modular flush boxes as specified to be provided in replacement of MS/Galvanised sunken boxes and measured seperately..

Description all as per srl item No 153 but one 3 pin socket outlet 6 amps independent

Description all as per srl item No 153 but one 3 pin socket outlet 6 amps on same board

Description all as per srl item No 153 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised suitable size sunken boxes incl white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.Make of wire: Havells/Polycab.

Description all as per srl item No 157 but one 3 pin socket outlet 6 amp independent board.

Description all as per srl item No 157 but one 3 pin socket outlet 6 amp on same board.

Description all as per srl item No 157 but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in continuous earth wire. complete all as specified and directed.

Material and labour for modular type switch one way 6 amps, 1 module complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6 amps combined 2 module complete all as specified and directed.

Material and labour for modular type switch, one way 16 Amps 1 module complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6/16 amps combined 2 module complete all as specified and directed.

Supply and fix Fan regulator step type (electronic ) 2 Module for 1200/1400mm sweep AC ceiling fan.Make: Cat Ref 800142 Elvira Indoasian or equivalent in Havells, Anchor (Roma)

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Batten type complete in all respect .Cat Part No LHFYBYPNIA1W022 in Havells or Cat part No DMLN1LT8-16 in Crompton or Cat part No WIO921208 of Wipro, HILB04-118LED of Halonix alongwith LED tubeRod with superior aesthetic and heat dissipation capability suitable for G-13 base tubelights base fluorescent T8/T12 luminaire , 18-20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Model LHLDCLXNUJ7Z018 of Havells or Cat part No LTT 8-20 of Crompton or LL13-181-650 of Wipro, HLTLD-NI03-18CW-PC of Halonix. Note : The LED batten and LED tube rod shall be of same make.

Supply and fixing only lamp holder, PVC /Polycarbonate type with back plate for batten fitting.

Supply and fixing LED lamp 7watt B-22 holder base with polycarbonate body and aluminium heat sink warm white cat part No LTHPLEDLAMP7W/B22 in C&S or equivalent in Havell's/Philips.

Supply and fixing Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing. Makes: IndoAsian Optipro Cat Part No 811807 or or equivalent in Havells/ Legrand

Supply and fixing MCB SPN complete 25 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand

Supply and fixing MCB SPN complete 40 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand

Material and labour for sub main wiring with single core copper conductor cable FRLSH-PVC insulated and unsheathed of size 2x4 Sqmm and one No 1x4sqmm as in continuous earth wire drawn into and including PVC concealed conduit 20mm dia medium grade 1.5mm wall thickness ISI marked with all conduit fitting and fixing accessories including chesing, cutting and making good to match with existing surface complete all as specified and as directed by Engineer-in-Charge (Note:- Two single core PVC insulated 6 Sqmm cable and one single core PVC insulated 4sqmm cable with PVC conduit 20mm dia shall be measured as one length)

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl taking down of unsv exhaust fan complete all as specified and directed. Make : Crompton/Bajaj/Havells.

Supply and fixing energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro

Supply and fixing Modular GI Metal Flush Box 12 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 6 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 3 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply and fixing White Cover Plate with Frame 12 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply and fixing White Cover Plate with Frame 6 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply and fixing White Cover Plate with Frame 03 module Make Havells/ Legrand/Indoasian complete all as specified and directed

Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type (IP-55) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 45 cms made out of 40x40x6 mm angle iron grouted on brick masonary platform upto 30 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. The fault with standing capacity shall be 36 KA. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be approved by CPRI width of the panel not less than 40 cms. (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCCB's should be connected with extensions terminals at both side (incoming and outgoing).

Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type (IP-55) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 45 cms made out of 40x40x6 mm angle iron grouted on brick masonary platform upto 30 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. The fault with standing capacity shall be 36 KA. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be approved by CPRI width of the panel not less than 40 cms. (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCCB's should be connected with extensions terminals at both side (incoming and outgoing).

Supply and fixing AC single phase 240 Volt 50Hz ceiling fan of size 1200mm sweep 5 star rating with canopy and hanging rod with all accessories incl nuts, bolts, clamps etc., complete all as specified and directed. Make : Havells cat part No ES-50 premium 5 star ISI marked, Crompton cat part No : Entrust 50 or Orient cat No Jazz pearl metallic white chrome. Note : Each ceiling fan shall be marked with the MES No in black paint clearly visible to naked eye when fitted in position.

Supply and fixing 9 watt LED lamp with bracket holder in garden lights complete in all respect. Make Crompton/ Havells, Wipro.

Supply and fix GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches under floor, ducts etc with fixing clamps, nuts bolts etc for cable protection all as specified.

Supply and fixing multi core round PVC insulated aluminium conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 2.5 Sqmm, 2 core to street light inside/outside pole complete all as specified.

Supply and fixing HDPE pipe of size 40 mm dia grade PE 63 rating PN 10 suitable for protection of LT cable complete all as specified.

Supply and fixing rigid steel condiut duly painted with aluminium paint over a coat of primer of size 20 mm dia including all accessories for fixing with 2 no MS flat clamps 25mmx3mm complete all as specified.

Supply and fixing integral type mid power LED 1X30 watt IP66 New generation energy saving & environment friendly long life versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 30W LED 3000K working voltage 220-240V and as directed by Engr-in-Charge. Make : Halonex CAT PART NO HLFLD-ML17-30-CWL or equivalent IN C&S / Phillips / Havells / Jaquar/Crompton all as specified and as directed by EIC.

Supply and fixing LED roadway light luminaire aesthetically designed comprising of die cast aluminium housing including, poly carbonate cover with in-built electronic control gear with short circuit, over voltage and surge protection suitable for and including 45W LED with lenses, complete, all as specified and directed by Engr-In-Charge.Make:- Crompton Cat No LSTP-45-CDL or equivalent IN C&S / Phillips / Havells / Jaquar fittings all as specified and as directed by EIC.

Supply and fixing in replacement of LED 1X60 watt LED IP66 New generation energy saving & environment friendly long life versatile pressure die-cast aluminium with lens and toughened glasstype roadway luminaire with high power LEDs as light source including electronic driver 60 W LED 6000K working voltage 220-240V and as directed by Engr-in-Charge.. Make : Halonex CAT PART NO HLSLD-15-36-CWL-R or equivalent IN C&S / Phillips / Havells / Jaquar/Crompton all as specified and as directed by EIC.

Supply and fixing LED flood light 1X100watt LED IP65 New generation energy saving & environment friendly long life versatile pressure die-cast aluminium with lens and touchened glasstype with high power LEDs as light source including electronic driver 100 W LED working voltage 220-240V and as directed by Engr-in-Charge. Make : CAT PART NO LFLN-100-CDL/60-M of Crompton or equivalent IN C&S / Phillips / Havells / Jaquar/Halonex all as specified and as directed by EIC.

Supply and fixing LED Heritage type landscape lighting 1X20 watt IP65 post top ideal to lit up parks,garden ways and heritage sites all as directed by Engr-in-Charge. Make : CAT PART NO LPTH-20-CDL of Crompton or equivalent IN C&S / Phillips / Havells / Jaquar/Halonex all as specified and as directed by EIC.

Supply and fixing light bracket made out of GI pipe 1.5 Mtr long, 40 mm dia medium grade bent to shape as directed including two no clamps made out of 50 mm x 6 mm flat for fixing bracket suitable for PCC poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

Supply & fixing automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54.the contactor,MCBs and copper circuit wiring (min.16sqmm) should enough to take: three-phase load of 12KW;contactor Rating 80Amps; MCB(spn) Rating 80Amps.MAKE:-Nature switch :Kakatiya energy systems pvt.ltd. hyderabad/bajaj/healer. Contactor:- BCH/L&T/Schneider or equivalent (as per IEC-60947-4-1/IS-13947-4-1), MCBs(Input-output):Hager/schneider/L&T/BCH or equivalent (as per IEC-60898/IS-8828),Circuit wiring : Finolex/polycab/RR Kable or equivalent. Model no SWADEEP-02EC12KW1P

Supply and fixing bus bar panel made of 2mm thick CRCA sheet with 100 Amps capacity Bus-bar - 4 Nos complete all as specified and directed including necessary MS clamp of flat iron nuts and bolts,fixed in wall/fixed on PCC block of size 30x30x30cm and making all electric connections with fresh lugs,jumpers as per cable size complete all as specified and directed by Engr-in-charge. The bus bar panel should be painted with two coat of powder coating. Note : The cost of PCC will be included in item rate and no extra cost will be provided on this account

Supply, laying and testing LT cable 1100 Volts grade heavy duty electric cable PVC insulated & PVC outer sheathing with aluminium conductor, Armoured conforming to IS-7098 Part-I (1988) with latest ammendments of size 06 Sqmm x 2 core. (MAKE :Havells, Finolex, Gloster) Note:- Earthwork/excavation shall be measured separately

Supply, laying and testing LT cable 1100 Volts grade heavy duty electric cable PVC insulated & PVC outer sheathing with aluminium conductor, Armoured conforming to IS-7098 Part-I (1988) with latest ammendments of size 10 Sqmm x 2 core. (MAKE :Havells, Finolex, Gloster) Note:- Earthwork/excavation shall be measured separately

Supply, laying and testing LT cable 1100 Volts grade heavy duty electric cable PVC insulated & PVC outer sheathing with aluminium conductor, Armoured conforming to IS-7098 Part-I (1988) with latest ammendments of size 16 Sqmm x 2 core. (MAKE :Havells, Finolex, Gloster) Note:- Earthwork/excavation shall be measured separately

Supply, laying and testing LT cable 1100 Volts grade heavy duty electric cable PVC insulated & PVC outer sheathing with aluminium conductor, Armoured conforming to IS-7098 Part-I (1988) with latest ammendments of size 10 Sqmm x 4 core. (MAKE :Havells, Finolex, Gloster) Note:- Earthwork/excavation shall be measured separately

Supply, laying and testing LT cable 1100 Volts grade heavy duty electric cable PVC insulated & PVC outer sheathing with aluminium conductor, Armoured conforming to IS-7098 Part-I (1988) with latest ammendments of size 25 Sqmm x 3.5 core. (MAKE :Havells, Finolex, Gloster) Note:- Earthwork/excavation shall be measured separately

Supply and Fixing Junction box thermoplastics polystyrene/polycarbonate enclosure, shock proof, IP65( weather proof), rust proof, dust proof, water proof, internally embedded gasket with provision for all side cable entry through glands(IP-65) and/or grommets(IP-55). Size of enclosure: (102x197 x92) mm With suitable connecters for 3Ph/1Ph loop in loop out and branch out vibration proof connections and fixing on and including PCC platform made of 1:2:4 type B-1 of size 30x30x30cm with nuts,bolts and washers with proper thimbles.. Make: HENSEL/Sintex

Dismentaling and taking out L.T Pole (any type) complete all as specified and directed(Note: servicable PCC L.T Pole kept in safe custody for reuse)

Shifting and fixing of removed L.T Pole (any type) including earthwork,PCC complete all as specified and directed

Supply and Fixing MOON (OPAL) decorative gate light made out of high grade unbreakable polycarbonate material suitable for LED lamp B22 Make : Havells CAT PART NO LHFXBON1TN5Q014-9405 or equivalent IN C&S / Phillips / Crompton all as specified and as directed by EIC.

Material and labour for erecting in truly vertical position Pre stressed concrete poles 9 meters long size 102mm X 172 mm at top and 102 mm X 279 mm at bottom class 10 including numbering of poles with paint and painting up 1.5 meter above PCC benching of poles in black and white strips 5 number complete all as specified and directed by Engr in charge. Note:- Excavation, earth work and foundation concrete and coping etc will be measured and paid separately.

Supply & erecting in truly vertical position steel tubular swaged poles 410 SP-31 (9.00 mtrs long) complete with 300 x300x 6 mm thick MS base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, bolts, nuts & screws including one shop coat of red oxide primer and internally bituminous painted including painting with two coats of aluminium paint and black and white strips 30 cm upto 1.5mtr height from top of coping in strips all as directed Noe : Earth work & PCC shall be measured & paid for separately.

Supply and spreading dry sand cushioning to cable providing with a layer of sand 8cm deep before laying the cable and 15cm deep after laying and stretching the cable in trenches complete all as specified in SSR part-I.

Supply & laying dry bricks over cable as mechanical protection with width equal to length of brick with Sub-Class 'B' bricks complete all as specified in SSR patr-I.

Material and labour for cutting of existing GI pipe/CI pipe off size 200/150mm bore for insertion of Tee, coller for taking branch connection of suitable size of bore including threading all as required at site.

Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

M/S K D Construction Co

Modh Hafiz Khan

NARESH KUMAR AND COMPANY

M/S Raman Construction Co.