CONSTRUCTION OF COMMUNITY HALL AT KOTESHWAR FOR GMC.

Name of Work: CONSTRUCTION OF COMMUNITY HALL ON F.P. NO - 58/2, AT KOTESHWAR FOR GMC.

No. Total Qty Item Description Unit Rate in figures Rate in Words Total

Clearing and grubbing road land including uprooting rank vegetation grass Eighty Six Thousand Five

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of Hectar Hundred Fifty Five

1 0.41 trees cut earlier and disposal of unserviceable materials(A) By manual e

Rupees and Ninety

means in area of light jungle Seven Paise

Excavation for foundation upto 1.5 m depth including sorting out and One Hundred Twenty

2 720.50 stacking of useful materials and disposing off the excavated stuff upto 50 C.M. 123.13 Three Rupees and

Meter lead.(A) Loose or soft soil Thirteen Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

One Hundred Thirty Six

3 668.00 out and stacking of useful materials and disposing off the excavated stuff C.M. 136.30

Rupees and Thirty Paise

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

One Hundred Forty Nine

sorting out and stacking of useful materials and disposing off the

4 48.00 C.M. 149.65 Rupees and Sixty Five

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting

out the soil and disposal of the surplus excavated soil as directed within a

Eight Hundred Thirty

5 109.00 lead of 50 Meter for following diameter of pipes.(ii) 250 mm no 837.00

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- Three Thousand Seven

graded stone aggregates 20 mm nominal size) and curing complete Hundred Fifty Eight

excluding cost of formwork in (A) Foundation and Plinth Rupees and Nineteen

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- Three Thousand Nine

graded stone aggregates 20 mm nominal size) and curing complete Hundred Seventy Eight

including cost of formwork in (A) Foundation and Plinth Rupees and Thirty Nine

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

Three Thousand Four

graded stone aggregates 20 mm nominal size) and curing complete

8 312.00 C.M. 3499.15 Hundred Ninety Nine

excluding cost of formwork in (A) Foundation and Plinth

Rupees and Fifteen Paise

Providing and laying controlled cement concrete work M250 and curing Four Thousand Three

complete excluding the cost of form work and reinforcement of reinforced Hundred Forty Six

concrete work in :(A) foundation, footing, base of columns and mass Rupees and Eighty Eight

Providing and laying controlled cement concrete work M250 and curing Four Thousand Six

complete including the cost of form work but excluding reinforcement of Hundred Thirteen

reinforced concrete work in : (A) foundation, footing, base of columns and Rupees and Sixty Eight

mass concrete Paise

Providing and laying controlled cement concrete work M250 and curing

Eight Thousand Forty

complete including the cost of form work but excluding reinforcement of

11 73.00 C.M. 8042.63 Two Rupees and Sixty

reinforced concrete work in : (B) COLUMN UP TO PLINTH

Providing and laying controlled cement concrete work M250 and curing

Six Thousand Four

complete including the cost of form work but excluding reinforcement of

12 107.00 C.M. 6402.39 Hundred Two Rupees

reinforced concrete work in : (C) BEAM UP TO PLINTH

and Thirty Nine Paise

Providing and laying controlled cement concrete work M200 and curing Six Thousand Three

complete including the cost of form work but excluding reinforcement of Hundred Fifty Five

reinforced concrete work in : Coping (I) COPING UP TO PLINTH Rupees and Ninety

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

Seventy Seven Rupees

14 52041.00 bending, binding and placing in position complete upto floor two level (UP kg. 77.29

and Twenty Nine Paise

Bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation Four Thousand Two

15 210.00 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional C.M. 4214.09 Hundred Fourteen

Rupees and Nine Paise

Filling available excavated earth (excluding rock) in trenches. plinth, sides of One Hundred Thirty Six

16 907.50 foundations etc. in layers not exceeding 20 cm. in depth consolidating each C.M. 136.92 Rupees and Ninety Two

disposited layer by ramming and watering. Paise

Filling in foundation and plinth with murrum or selected soil in layers of Two Hundred Seventy

17 2195.00 20cm. Thickness including watering, ramming and consolidating etc. C.M. 277.14 Seven Rupees and

complete. Fourteen Paise

Providing and laying 20 mm thick water proof cement plaster using water

proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall

Two Hundred Seventeen

18 57.00 work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) S.M. 217.15

Rupees and Fifteen Paise

including finishing with a flooting coat of neat cement slurry etc complete

20mm thick sand faced cement plaster on walls upto height 10 metres

Three Hundred Fifteen

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

19 1254.50 S.M. 315.69 Rupees and Sixty Nine

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface

One Hundred Twenty

(two coats) to give an required shape even shade after thoroughly brushing

20 1246.00 S.M. 120.26 Rupees and Twenty Six

the surface to remove all dirt, and remains of loose powdered materials.etc

Providing and laying Ceramic tiles 6mm thick inflooring treads of steps and

landing laid on a bedof 12mm thick cement mortar 1:3 (1-cement : 3-

21 9.00 S.M. 1017.30 Seventeen Rupees and

coarse sand ) finishing with flush pointing inwhite cement.

Providing and laying Ceramic tiles 6mm thick inskrting risers of steps and

One Thousand Seventy

22 3.50 dedo on 10mm thickcement plaster 1:3 (1-cement : 3-coarse sand)and S.M. 1074.00

jointed with white cement slurry

Providing and laying Granite slab (18 mm thick) one side polished flooring

Two Thousand Nine

over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse

23 13.00 S.M. 2905.77 Hundred Five Rupees

sand) or L.M 1:1.5 laid and jointed with grey cement slurry including

and Seventy Seven Paise

rubbing and polishing complete

Providing and laying polished granite stone slab 18 mm thick in risers of

Three Thousand Fifty

steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement :

24 9.00 S.M. 3057.27 Seven Rupees and

coarse sand) and jointed with gray cement slurry including rubbing &

Twenty Seven Paise

polishing etc. Complete

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent One Hundred Eleven

25 1080.00 is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % S.M. 111.25 Rupees and Twenty Five

concrentration inclusive of one litre chemical emulsion appication at the Paise

rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Constructing Under Ground water tank with Providing and laying controlled

cement concrete M250 mix for R.C.C. work including rainforcement, boxing,

centering,vibrating, curing and mixed with approved water proofing

cement compound or "CEMWET" or "PIDICRETE LW" integral water

proofing admixture as water proofing agent to be mixed with 50 kgs. bags

shall be as recommended by the manufacture of the water proofing

material, concrete work for top, bottom slab & side pardi for under ground

water tank item incl. Necessary excavation & refilling the available earth, 15 Eight Rupees and Forty

cm thk 1:2:4 for bedding of concrete, 20 mm thk. water proofing cement Eight Paise

plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata, watering

etc. Comp. to all face of tank . including locking arrengement outlet, inlet,

overflow and washout outlet pipe arrengement as necessary & C.I. Cover

0.60 x 0.45 weight not less then 35 kg with locking arrengment. etc. comp

as per structural drawing Including Steel & as directed by Eng-in-charge.

Providing and laying controlled cement concrete work M250 and curing

Eight Thousand Forty

complete including the cost of form work but excluding reinforcement of

27 1.00 C.M. 8042.63 Two Rupees and Sixty

reinforced concrete work in : (B) Column at Ground Floor

Providing and laying controlled cement concrete work M250 and curing

Eight Thousand Eighty

complete including the cost of form work but excluding reinforcement of

28 96.00 C.M. 8084.04 Four Rupees and Four

reinforced concrete work in : (B) Column at Ground Floor

Providing and laying controlled cement concrete work M250 and curing Eight Thousand One

complete including the cost of form work but excluding reinforcement of Hundred Twenty Five

reinforced concrete work in : (B) Column at First Floor Rupees and Forty Five

Providing and laying controlled cement concrete work M250 and curing Eight Thousand One

complete including the cost of form work but excluding reinforcement of Hundred Sixty Six

reinforced concrete work in : (B) Column at Terrace Floor Rupees and Eighty Six

Providing and laying controlled cement concrete work M250 and curing

Six Thousand Four

complete including the cost of form work but excluding reinforcement of

31 1.50 C.M. 6402.39 Hundred Two Rupees

reinforced concrete work in : (C) Beam At Ground Floor

and Thirty Nine Paise

Providing and laying controlled cement concrete work M250 and curing Six Thousand Seven

complete including the cost of form work but excluding reinforcement of Hundred Eighty Three

reinforced concrete work in : (C) Beam At Ground Floor Rupees and Sixteen

Providing and laying controlled cement concrete work M250 and curing Six Thousand Eight

complete including the cost of form work but excluding reinforcement of Hundred Twenty Four

reinforced concrete work in : (C) Beam At First Floor Rupees and Fifty Seven

Providing and laying controlled cement concrete work M250 and curing Six Thousand Eight

complete including the cost of form work but excluding reinforcement of Hundred Sixty Four

reinforced concrete work in : (C) Beam At Terrace Floor Rupees and Ninety

Providing and laying controlled cement concrete work M250 and curing Six Thousand Six

complete including the cost of form work but excluding reinforcement of Hundred Seventy Nine

reinforced concrete work in : (D) Slab At Ground Floor Rupees and Thirteen

Providing and laying controlled cement concrete work M250 and curing Nine Thousand Eight

complete including the cost of form work but excluding reinforcement of Hundred Forty Six

reinforced concrete work in : (D) Slab At Ground Floor Rupees and Forty Nine

Providing and laying controlled cement concrete work M250 and curing Nine Thousand Eight

complete including the cost of form work but excluding reinforcement of Hundred Eighty Six

reinforced concrete work in : (D) Slab At First Floor Rupees and Eighty Nine

Providing and laying controlled cement concrete work M250 and curing

Nine Thousand Nine

complete including the cost of form work but excluding reinforcement of

38 12.00 C.M. 9928.30 Hundred Twenty Eight

reinforced concrete work in : (D) Slab At Terrace Floor

Rupees and Thirty Paise

Providing and laying controlled cement concrete work M250 and curing

Six Thousand Four

complete including the cost of form work but excluding reinforcement of

39 5.00 C.M. 6443.80 Hundred Forty Three

reinforced concrete work in : (F) Lintel At Ground Floor

Rupees and Eighty Paise

Providing and laying controlled cement concrete work M250 and curing Six Thousand Four

complete including the cost of form work but excluding reinforcement of Hundred Eighty Four

reinforced concrete work in : (F) Lintel At First Floor Rupees and Twenty

Providing and laying controlled cement concrete work M250 and curing

Six Thousand Three

complete including the cost of form work but excluding reinforcement of

41 3.00 C.M. 6309.47 Hundred Nine Rupees

reinforced concrete work in : (G) Chhajja At Ground Floor

and Forty Seven Paise

Providing and laying controlled cement concrete work M250 and curing Six Thousand Three

complete including the cost of form work but excluding reinforcement of Hundred Ninety Two

reinforced concrete work in : (G) Chhajja At First Floor Rupees and Twenty Nine

BONDED POST TENSIONING WORK FOR PT BEAMS

Design & Execution of Post Tensioning beams including supplying,

decoiling, cutting to the required length and laying of high tensile LRPC

strands confirming to latest IS 14268, supplying GI corrugated ducts of

mm thickness, jointing with couplers, and inserting the strands, profiling,

fixing live end anchorages including the supply of stressing anchorages,

grout vents, making dead end anchorages including flowering the strands, Two Thousand Eight

fixing tendon support bars, supervising the fixing of anti bursting Hundred Ninety Six

reinforcement, stressing the cables, end trimming, grouting the ducts with Rupees and Sixty Eight

cement sand grout using approved admixtures, reading and recording the Paise

results, with required Plant & Machineries, tools and tackles, etc., including

obtaining approval from structural consultant all complete to satisfaction

of engineer-in-charge. Multi Anchorage assembly must be certified from IIT

or equivalent institutes.

Providing and laying controlled cement concrete work M250 and curing

Eight Thousand Two

complete including the cost of form work but excluding reinforcement of

44 13.00 C.M. 8203.22 Hundred Three Rupees

reinforced concrete work in : (H) Staircase At Ground Floor

and Twenty Two Paise

Providing and laying controlled cement concrete work M250 and curing Eight Thousand Two

complete including the cost of form work but excluding reinforcement of Hundred Forty Four

reinforced concrete work in : (H) Staircase At First Floor Rupees and Sixty Three

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

Seventy Seven Rupees

46 51970.00 bending, binding and placing in position complete. At Ground Floor kg. 77.29

and Twenty Nine Paise

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

Seventy Eight Rupees

47 51145.00 bending, binding and placing in position complete. At First Floor kg. 78.34

and Thirty Four Paise

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

Seventy Eight Rupees

48 9350.00 bending, binding and placing in position complete. At Terrace Floor kg. 78.34

and Thirty Four Paise

Brick work using common burnt clay buildingbricks having crushingstrength Four Thousand Three

not less than 35kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 Hundred Ninety Seven

(1- Cement : 6 -fine sand)(B)Conventional Rupees and Forty One

Masonary work using Aerated light weight concrete block having crushing

Four Thousand Five

strength not less than 35 kg/sqcm for super structure above plinth level

Hundred Ninety Eight

50 221.00 upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) C.M. 4598.91

Rupees and Ninety One

complete as per Technical Specification (At Ground Floor)

Masonary work using Aerated light weight concrete block having crushing

Four Thousand Six

strength not less than 35 kg/sqcm for super structure above plinth level

Hundred Forty One

51 221.00 upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) C.M. 4641.33

Rupees and Thirty Three

complete as per Technical Specification At First Floor

Masonary work using Aerated light weight concrete block having crushing

Four Thousand Six

strength not less than 35 kg/sqcm for super structure above plinth level

Hundred Eighty Three

52 64.00 upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) C.M. 4683.75

Rupees and Seventy Five

complete as per Technical Specification At Terrace Floor

Masonary work using Aerated light weight concrete block having crushing

Four Thousand Seven

strength not less than 35 kg/sqcm for super structure above plinth level

Hundred Twenty Six

53 19.00 upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) C.M. 4726.17

Rupees and Seventeen

complete as per Technical Specification At LMR Level

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and One Hundred Sixty Five

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (At Rupees and Two Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

One Hundred Eighty

of single or half brick walls for interior plastering upto floor two level and

55 1760.00 S.M. 189.59 Nine Rupees and Fifty

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (At

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and Two Hundred Fourteen

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (At Rupees and Fifteen Paise

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in One Hundred Forty Eight

(ii) Cement mortar 1:4 (1-cement :4-sand) (At Ground Floor) Rupees

Providing 10mm thick cement plaster in single coat on brick/concrete walls

One Hundred Seventy

for interior plastering upto floor two level and finished even and smooth in

58 943.00 S.M. 170.39 Rupees and Thirty Nine

(ii) Cement mortar 1:4 (1-cement :4-sand) (At First Floor)

Providing 10mm thick cement plaster in single coat on brick/concrete walls

One Hundred Ninety

for interior plastering upto floor two level and finished even and smooth in

59 109.00 S.M. 192.78 Two Rupees and Seventy

(ii) Cement mortar 1:4 (1-cement :4-sand) (At Terrace Level)

20mm thick sand faced cement plaster on walls upto height 10 metres

Three Hundred Fifteen

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

60 1430.00 S.M. 315.69 Rupees and Sixty Nine

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing throating or plaster drip and moulding to R.C.C. Chajja etc.comp

Forty Three Rupees and

Seventy Four Paise

Prov.20mm deep finished groove ..etc.comp Ten Rupees and Ten

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

Twenty Four Rupees and

63 278.00 mortar 1:1 including neat cement finishing, watering etc. complete. R.M. 24.28

Twenty Eight Paise

Providing and fixing 150 mm wide, approved quality chicken wire mesh at

junction of brick work and RCC work or two dissimilar surfaces, at all

Fifty Eight Rupees and

64 357.00 heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before S.M. 58.58

Fifty Eight Paise

applying the plaster, including curing, scaffolding all complete as directed.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

One Thousand Nineteen

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

65 146.00 S.M. 1019.39 Rupees and Thirty Nine

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete.(A) Rough Kotach stone Slab. 25 mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

One Thousand Two

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Hundred Twenty Six

66 22.00 Cement : 3 coarse sand) and jointed with gray cement slury mixed with S.M. 1226.46

Rupees and Forty Six

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying Granite slab (18 mm thick) one side polished flooring

Two Thousand Nine

over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse

67 115.00 S.M. 2905.77 Hundred Five Rupees

sand) or L.M 1:1.5 laid and jointed with grey cement slurry including

and Seventy Seven Paise

rubbing and polishing complete

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo

Three Thousand Fifty

and pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse

68 192.50 S.M. 3057.27 Seven Rupees and

sand) and finished with flush pointing in white or colour cement including

Twenty Seven Paise

rubbing & polishing comp.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing One Thousand Four

on existing flooring by adhesive material including dismentaling of existing Hundred Sixty Seven

flooring and jointed with color cement slurry including finised with flush Rupees and Seventy Two

pointing & cleaning the surface etc. complete for antiskit Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing One Thousand Three

on existing flooring by adhesive material including dismentaling of existing Hundred Thirty One

flooring and jointed with color cement slurry including finised with flush Rupees and Twenty Two

pointing & cleaning the surface etc. complete for light shade Paise

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting One Thousand One

71 376.00 risers of steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3- S.M. 1114.09 Hundred Fourteen

coarse sand) and jointed with white cement slurry Rupees and Nine Paise

Providing and fixing FRP FRAME size 100 x50mmm and 28mm thick FRP

Degree panel shutter having extra reinforcement on sides and edges and in

Gel coat finish. The core of the shutter is to be filled up with injectd fire

retardant grade polyurethane foam done in situ along with embedded

Two Thousand Three

wooden pices for stiffening and also for taking hinges and fixtures. The

Hundred Seventy Seven

72 50.00 whole FRP frame and shutter is to be water proof, weather proof, termite S.M. 2377.76

Rupees and Seventy Six

proof and resistance to mild acid/Alkali, Rates are to be inclusive of S.S.

hinges with necessary screws and alluminium fixtures and fastening

product should have 3 years erformance guarantee and company have ISO

9001-2000 certificate.

Providing and fixing 35 mm thick solid core flush door shutter of approved

make both side lamination using 1mm thick approved laminate sheets

with 6mm thk Lipping/border patti around flush hutter including fixing SS

hinges, , wedges, keys, nails, catch screw, lever latches , handle(10 cm), Two Thousand Three

aldrop(20 cms), stoppers(20 cms), etc and cutting/ drilling of necessary Hundred Sixty Nine

holes in masonry/ concrete and all as per drawing, specification and Rupees and Forty Six

direction of the Engineer, all materials, tools,plant and labour complete c. Paise

(All fixtures & fittings shall be stainless steel of approved

quality).approved by architect/Engineer Incharge.At all Floors

Providing and fixing standared extruded of alluminium section of size One Thousand One

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with Hundred Seventy Five

colour anodized alluminium frame for ventilation with 5 mm thick frosted Rupees and Fifty Six

glass as details etc complete for Ventilation Paise

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size

mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal

Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal One Thousand Seven

member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of Hundred Thirteen

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Rupees and Seventy

Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) Paise

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size

One Thousand Five

x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized alluminium

76 60.00 S.M. 1525.00 Hundred Twenty Five

frame with 5 mm thick transparent bronze colour tinted float glass as

details etc complete for Fix window.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

One Thousand Five

1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm

Hundred Eighty Three

77 114.00 x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x S.M. 1583.95

Rupees and Ninety Five

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete.

Providing and fixing M.S. grills of required pattern to marble/granite frames

of window etc. with M.s. flats at required spacing and frames alround,

square or round bars fixed with round headed bolts and nuts or by screws,

One Hundred Eleven

78 3137.00 including oil painting with one coat of primer of approved quality and kg. 111.10

Rupees and Ten Paise

brand & two coats of synthetic enamal oil paint etc. complete as per detail

drawing and as directed by Engineer in charge.

Providing and fixing Stainless Steel railing having 50 mm x16G ASIS

Grade dia hollow stainless steel pipe as hand rail and 32x32 mmx16G ASIS

304 Grade sq. hollow stainless steel pipe with combination of 10 cm long

16 mmx16G ASIS 304 Grade dia pipe as vertical supports 16 mm x16G ASIS Five Thousand Three

304 Grade dia hollow stainless steel pipes as intermediate members Hundred Ninety Four

running through stainless steel 30 mm dia solid runners having threaded Rupees and Forty One

screw to fix the runner with vertical suppoet including cutting bending Paise

w=elding & fabrication the structure as per drawing including finishing etc

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mmbraced with flat iron diagonals 20 x 5 mm size with

Three Thousand Six

top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys

80 26.00 S.M. 3630.09 Hundred Thirty Rupees

complete with bolts, nuts, locking arrangements, stoppers handles

including applying a priming coat of red lead paint.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

Sixty One Rupees and

81 1094.05 or angle cleats as in main and cross beams. Hip and jack rafters, purlins kg. 61.61

Sixty One Paise

conneted to common rafters and the like. including applying a priming coat

of red lead paint and two coats of oil painting etc complete

Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of

primer of approved brand and manufacture on new wall surface to give an

Forty Rupees and Fifty

82 5568.00 even shade including thoroughly brushing the surface free from mortar S.M. 40.59

dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

Eighty Three Rupees and

83 3572.00 including throughly brushing the surface free from mortar droppings and S.M. 83.18

other foreign matter and sand papered smooth.(A) for wall and similar

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

Eighty Eight Rupees and

84 1982.00 including throughly brushing the surface free from mortar droppings and S.M. 88.87

Eighty Seven Paise

other foreign matter and sand papered smooth. B) for ceilings and soffits

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

Eighty Eight Rupees and

85 14.00 including throughly brushing the surface free from mortar droppings and S.M. 88.87

Eighty Seven Paise

other foreign matter and sand papered smooth. B) for ceilings and soffits

Finishing wall with weather proof exterior emulsion paint like Asian apex

ultima ,ICI weather shield ,Neroleck , or equivalent on wall surface (two One Hundred Twenty

86 1430.00 coats) to give an required shape even shade after thoroughly brushing the S.M. 120.26 Rupees and Twenty Six

surface to remove all dirt, and remains of loose powdered Paise

materials.etccomplete

Providing cinder filling in sunken floors including watering, consolidating, Four Hundred Ninety

87 25.00 ramming complete. S.M. 499.95 Nine Rupees and Ninety

GMC LOGO - OUTSIDE

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm acrylic

on top of brand Ptglass, astari etc, including led lights with all laser and cnc One Lac Seventy Six

88 1.00 work, including all material, labour, 25 mm ss studs for mounting and other No. 176750.00 Thousand Seven

hardwares, waste of materials etc and complete the work satisfactorily as Hundred Fifty Rupees

per instruction of architect or Engineer-in charge. (Basic size of logo is

S. S. Signages Providing & Fixing S. S. Plate Signages having size of 450 X 100 Two Thousand One

X 2 mm thick name plates of 304 grade mentioning officers Hundred Thirty Eight

names/designations etc. as per image and directed by the Architect and Rupees and Seventeen

approved by the Engineer in Charge. Paise

Acrylic Signage Providing and Fixing Signages (Acrylic Name Plates) having

Seven Hundred Twenty

size of 450 X 100 X 5 mm thick displaying Names of Room/Hall having

90 20.00 No. 720.13 Rupees and Thirteen

fonts, colour as per image and directed by the Architect and approved by

the Engineer in Charge.

COFFEE TABLE ( 1.20 X 0.60 X 0.45 )

Providing and fixing Coffee table of brand as per architects selection,and Fifteen Thousand One

complete the work satisfactorily as per instruction of architect or Engineer- Hundred Fifty Rupees

in charge.(basic rate per piece is 15000/-)

HD PHOTO & VIDEOGRAPHY & DRONE SHOOT & COFFEE TABLE BOOK

Providing & Presenting professional HD photography, videography & drone

shooting for pre-construction, during construction and Post-construction

work and also providing & presenting Technical details, drawings & Detail

Fifty Five Thousand Five

92 1.00 of benefits of the project to people/environment in the described picture No. 55550.00

Hundred Fifty Rupees

form with a small reel of the entire project. & Preparing Coffee table book

minimum 25-30 pages.

Providing & fixing wash down water closet European type W.C. pan with One Thousand Six

integral 'P' or 'S' trap incl jointing the trap with soil pipe in cement motar Hundred Seventy Five

1:1 (1cement : 1fine sand ) having following additional accessories Rupees and Twenty Two

0.00 (A) vitrious china pattern- I in white colour 0 0.00 No Rupees

0.00 (a) G.I. inlet connection for flush pipe with W.C. pan 0 0.00 No Rupees

(b) plastic seat & cover for wash down water closet with c.p brass hinges

0.00 and rubbers buffers of colour match to the E.W.C.pan on All floor 0 0.00 No Rupees

Providing and fixing washbasin with single hole for pillar trap at all floor

level with C.I. or M.S. Brackets painted white including cutting holes and

making good the same including (A) Vitreous china flat back wash basin

550mm x 400mm size in white colour (a) providing and fixing C.P. brass

waste for wash basin or sink(A) 32mm (b) providing and fixing M.I.fisher Two Thousand Four

94 20.00 union for wash basin or sink(A) 32mm (c) piller tap,capstan head, screw No. 2459.06 Hundred Fifty Nine

down high pressurewith screw shanks and back nuts for 15mm dia. for all Rupees and Six Paise

floor (d)brass screw down stop tap (e)Rubber plug for sink or washbasin (f)

chromium plated bottle trap with necessary coupling of approved quality

for wash basin. All floor

Providing and fixing Urinal or approved quality including conecting the

One Thousand Seventy

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back

95 16.00 No. 1074.86 Four Rupees and Eighty

or corner type size 430mm x 260mm x 350mm.

Providing & fixing 600 mm. x 450 mm. mirror of superior glass at all floor

Eight Hundred Fifty Nine

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

96 21.00 No. 859.41 Rupees and Forty One

wooden plugs with C.P. brass screws and washers etc. for all floor

Providing and fixing PVC SWR Nanhi trap IS 14735 for drain -100 mm

Five Hundred Eighty Six

diameter with jali of the following nominal diameter of self cleaning design

97 38.00 No. 586.27 Rupees and Twenty

with C.I scead down or hinged grating including the cost of cutting and

making good the wall.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy, Two Hundred Eighty

98 140.00 complete with special falnge compression type fittings, wall clipsetc. R.M. 280.23 Rupees and Twenty

including making good the wall ceiling and floor.(F) Three Paise

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy, Three Hundred Thirty

99 140.00 complete with special falnge compression type fittings, wall clipsetc. R.M. 339.05 Nine Rupees and Five

including making good the wall ceiling and floor.(B) 110 mm dia. Paise

Providing and fixing S.W. Gully trap with C.I. gratting brick masonary One Thousand Two

chamber and water tight C.I. cover with frame of 300mm. x 300mm. size Hundred Ninety Two

with standard weight (i) square mouth trap(A) 100mm x 100 mm size- P- Rupees and Nineteen

Constructing brick masonary for under ground C.I. inspection chamber

and bends with bricks having crushing strength not less than 35 kg/cm2 in

c:m 1 :5 C.I. cover with frame 445mm x 610mm internal dimension total

weight of cover with frame to be not less than 38 kg.(wt. or cover 23 kg. Two Thousand Nine

and wt of frame 15 kg.) R.C.C. top slab with 1:2:4(1 cement :2 course sand : Hundred Thirty Two

4 grade stone aggregate 20mm size) foundation concrete 1: 5: 10 inside Rupees and Ninety

plaster 15 mm thick with cement mortar 1: 3 finished smooth with a Three Paise

floating coat of neat cement on walls and bed concrete etc. comp. (i) inside

dimension 455mm X 610mmX 450mm deep

Providing,& laying(to level or slopes) and joining R.C.C NP2 CLASS pipe in

Six Hundred Seventy

C.M 1:1 of following nominal internal diameter with collars and butt ends

102 100.00 R.M. 678.02 Eight Rupees and Two

prepared for collar joints including testing of pipes and joints etc. Complete

0.00 (B)300 mm dia. 0 0.00 No Rupees

Providing,& laying(to level or slopes) and joining R.C.C NP2 CLASS pipe in

One Thousand Seventy

C.M 1:1 of following nominal internal diameter with collars and butt ends

103 50.00 R.M. 1077.15 Seven Rupees and

prepared for collar joints including testing of pipes and joints etc.

Complete(A) 450 mm. dia.

Constructing Manhole with R.C.C.top slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1- cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including curing and festing Eleven Thousand Forty

104 7.00 (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with Each 11042.74 Two Rupees and Seventy

frame size 560mm diameter total weight of cover and frame to be not less Four Paise

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm

thick walls of brick msonry using brick having crushing strength not less

than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A

type depth 0.90 Metre for 150mm diameter sewer.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

Seventy Two Rupees and

105 100.00 metre C/C or shall be concealed as directed including necessary fittings etc. R.M. 72.65

Sixty Five Paise

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

Ninety One Rupees and

106 130.00 metre C/C or shall be concealed as directed including necessary fittings etc. R.M. 91.84

Eighty Four Paise

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

One Hundred Forty Eight

107 105.00 metre C/C or shall be concelled as directed including necessary fittings etc. R.M. 148.12

Rupees and Twelve Paise

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.(e) 40mm. dia.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two One Hundred Ninety

108 200.00 metre C/C or shall be concealed as directed including necessary fittings etc. R.M. 195.67 Five Rupees and Sixty

including testing of pipe and joints and fixing the same with adhesive Seven Paise

solvent,including cost of all materials.

Providing and fixing screw down bib tap at all floor level polished bright One Hundred Eighty Six

109 45.00 etc. comp. no. 186.83 Rupees and Eighty Three

0.00 (A) 15mm. dia. 0 0.00 No Rupees

Providing and fixing gun metal check or non return full way wheel valve at One Hundred Eighty Six

110 11.00 floor levels,etc. complete. no 186.83 Rupees and Eighty Three

0.00 (A) 15mm. dia. 0 0.00 No Rupees

Providing and fixing gun metal check or non return full way wheel valve at Four Hundred Twenty

111 7.00 floor levels,etc. complete. no 420.63 Rupees and Sixty Three

0.00 (C) 25mm. dia. 0 0.00 No Rupees

Providing and fixing gun metal check or non return full way wheel valve at Six Hundred Sixty Three

112 7.00 floor levels,etc. complete. no 663.43 Rupees and Forty Three

0.00 (E) 40mm. dia. 0 0.00 No Rupees

Providing and fixing chromium plated brass half turn flushcock at all floor

0.00 0 0.00 No Rupees

level, of approved quality incl. fixing in pipe line etc. comp.

(ii) 25mm. dia. Two Hundred Sixty

113 22.00 no 263.77 Three Rupees and

Seventy Seven Paise

Providing and fixing abonite ball cock of approved quality as directed etc.

0.00 0 0.00 No Rupees

(A) 25mm. dia. One Hundred Two

114 2.00 no 102.91 Rupees and Ninety One

Providing and fixing pillar tap, capstan head, screw down high pressure Three Hundred Fifty

115 21.00 with screws, shanks and back nuts. (ii) 20mm dia. no 354.69 Four Rupees and Sixty

Providing and fixing brass screw down stop tap.(B) 20mm dia. Two Hundred Twenty

116 21.00 no 223.81 Three Rupees and Eighty

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets Six Hundred Sixteen

117 20.00 fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. no 616.42 Rupees and Forty Two

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight Nine Hundred Fifty Eight

118 2.00 not less than 35Kg. no 958.17 Rupees and Seventeen

Providing erecting and fixing double coated Syntex or equivalent PVC (ISI)

Three Rupees and

119 10000.00 mark water tank of reqd capacity each with all necessary fitting and lit. 3.95

Ninety Five Paise

connection etc. comp on terrace.

(A) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

0.00 0 0.00 No Rupees

balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/ sqm

of cement admixed with proprietary water proofing compound conforming

0.00 0 0.00 No Rupees

to IS : 2645 over the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks\brick bats 25 mm to

mm size with 50 % of cement motar 1:5 ( 1 Cement : 5 Coarse sand )

admixed with proper water proofing compound confirming to IS :

over 20 mm thick layer of cement mortar of mix 1: 5 (1 cement : 5 Coarse

0.00 0 0.00 No Rupees

sand ) admixed with proprietary water proofing compound confirming to

IS : 2645 to required slope and treating similarly the adjoining walls upto

300 m height including rounding of junction of walls and slabs.

(C) after two days of proper curing applying a second coat of cement slurry

admixed with proprietary water proofing compound conforming to IS:2645

0.00 0 0.00 No Rupees

(d) finishing the surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement : 4 coarse sand) admixed withproprietary water proofing

0.00 compound conforming to IS: 2645 and finally finishing the surface with 0 0.00 No Rupees

neat cement slurry and making of 300 x 300mm square.

(e) the whole terrace so finished shall be flooded with water for a minimum

Six Hundred Seventy

period of two weeks for curring and for final test. All above operations to

120 1026.00 S.M. 670.64 Rupees and Sixty Four

be done in order and as directed and specified by the Eng-in-charge.

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

Seven Hundred Seventy

plain or slope and to be tempered to bring mortar creme out upto surface

121 956.00 S.M. 779.70 Nine Rupees and

using white cement including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Providing & fixing G.I. Rain water spout of 50 mm dia & 30 cm length etc. One Hundred One

122 5.00 No. 101.91 Rupees and Ninety One

Providing and fixing in position P.V.C. cowl vent to pipes of prince, suprim, Three Hundred Ninety

123 6.00 jain make etc. comp. (A) 75 mm. dia. No. 393.04 Three Rupees and Four

Providing and fixing in position P.V.C. cowl vent to pipes of prince, suprim, Five Hundred Eighty Six

124 6.00 jain make etc. comp. (A) 100 mm. dia. No. 586.27 Rupees and Twenty

Providing Loam or Clay soil of approval quality on site.

One Hundred Forty Six

Rupees and Forty Paise

Labour for spreading and mixing loam or clay soil or river silt evenly over

Seventy Five Rupees and

126 83.33 excavated area and levelling the same after clods etc. (Rate for one Cu. m. C.M. 75.47

Forty Seven Paise

Supplying and planting of good quality nodes of specified grass for dibbling:

It includes the cultivation of dround to a depth of 150mm, Planting (2”-3"

One Hundred Fifty Three

apart) of grass as per drawing without disturbing the desired gradient and

127 183.51 S.M. 153.52 Rupees and Fifty Two

level, watering, maintaining (forking, mowing, weeding, fertilizer

application, pest control etc.) it for a period of 3 months from the date of

lawn dibbling/plantation.

Doob grass(dibbling)

Shrubs/Ground covers

Supplying and planting healthy shrubs of different species of 500mm to

2000 mm height: by using the soil/ manure (either carted or supplied), and

watering it immediately. Maintaining( application of liquid manures/

Sixty Rupees and Sixty

128 350.00 growth regulators/ pesticides as per need, weeding and gap filling regularly NO 60.60

so as to keep the plant healthy all the time) it for a period of 6 months from

the date of plantation-Divas No RAJA,Ixora red,jasud,Hamelia,Divas No Raja

Providing & fixing RCC Precast benches as per drawings and required Four Thousand Five

129 10.00 fixtures including oil painting as per direction of E.I.C etc. Complete NO 4545.00 Hundred Forty Five

Providing and fixing (SUPREME ,NILKAMAL)make plastic dustbin(120 Liter) Four Thousand Five

130 10.00 for dry and wet garbage collection at specifid location as directed by NO 4545.00 Hundred Forty Five

Engineer in charge. Rupees

Box cutting the road surface to proper slop and camber for road work

One Hundred Nine

including a base for road work including removing the excavated stuff

131 212.00 C.M. 109.24 Rupees and Twenty Four

depositing on the road side slop as directed up to 50.0 mt. Lead.

Providing & laying of specified compacted thickness Granular sub base

(GSB) in specified grading in table 400-1 of the specification MORT&H and

compactor to the required density with 8 - 10 tonne vibratory roller with

plain drum or heavy pneumatic tyred roller of minimum 200 to 300 KN

weight in all seasons as per MORT&H , maintaining the required slope & One Thousand One

grade during the operation as approved by the engineer in charge & Hundred Forty Eight

watering to the proper moisture content and sprinkled with the help of Rupees and Thirty Seven

truck mounted water tank fitted with suitable arrangement .( fully Paise

saturated having CBR value greater or equal to 30) compacted thickness of

150 mm consisting of Machine crust stone aggregate as per grading 1 in

table 400-1 of the specification MORT&H fifth Revision.

Providing, laying, spreading and consolidation graded stone aggregate to

wet mix macadam 150mm compacted thick as per MORT & H specifications

One Thousand Five

including premixing the material with water at OMC in mechanical plant

Hundred Eighty Two

133 108.00 carriage of mixed material by tippers to site, laying in uniform layers with C.M. 1582.67

Rupees and Sixty Seven

paver in sub base/ base course on well prepared surface and compacting

with vibratory roller to achieve the desired density.

Dry Lean Cement Concrete Sub- base (Construction of dry lean cement

concrete Sub- base over a prepared sub-grade with coarse and fine

aggregate conforming to IS: 383, the size of coarse aggregate not exceeding

25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation

Two Thousand Three

after blending to be as per table 600-1, cement content not to be less than

Hundred Forty Two

134 108.00 150 kg/ cum, optimum moisture content to be determined during trial C.M. 2342.19

Rupees and Nineteen

length construction, concrete strength not to be less than 10 Mpa at

days, mixed in a batching plant, transported to site, laid with a paver with

electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing

Cement Concrete Pavement: Providing and Laying of un-reinforced, dowel

jointed, M300 pavement cement concrete pavement over a prepared sub

base with 53 grade cement with coarse and fine aggregate conforming to IS

383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a

batching and mixing plant as per approved mix design, transported to site,

Five Thousand Three

laid with a fixed form or slip form paver, spread, compacted and finished in

135 143.00 C.M. 5355.02 Hundred Fifty Five

a continuous operation including provision of contraction, expansion,

Rupees and Two Paise

construction and longitudinal joints, joint filler, separation membrane,

sealant primer, joint sealant, debonding strip, dowel bar, tie rod,

admixtures as approved, curing Compound, finishing to lines.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

Seven Hundred Forty

vibrated mechanically and as per approved design Confirming to IS 15658 :

136 2064.00 S.M. 740.51 Rupees and Fifty One

2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63- 2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade Three Hundred Seventy

137 336.00 concret as per approved design and including excavation for fixing in R.M. 374.92 Four Rupees and Ninety

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc Two Paise

complete. (upto 10 ton)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

Four Hundred Eighty

following type, erected on PVC / Metallic/Wooden box, single mounting

138 214.00 point 485.81 Five Rupees and Eighty

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete Cat.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected Six Hundred Seventy

139 65.00 on PVC / Metallic/Wooden box, single mounting base frame covered with point 674.68 Four Rupees and Sixty

textured/metallic/white front plate modules erected on / in wall / ceiling Eight Paise

as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling Five Hundred Ten

as per pipe erected with following type of accessories. [I] For 6A Plug and 6 Rupees and Five Paise

a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat.III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb Seven Hundred Forty

141 32.00 db board.(f) with medium class Rigid PVC pipe and accessories erected Each 745.38 Five Rupees and Thirty

concealed in wall/ceiling complete Cat.III Eight Paise

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame Two Hundred Fifty

142 49.00 covered with textured / metallic/white front plate modules erected on / in point 257.55 Seven Rupees and Fifty

wall / ceiling with following type accessories Cat. III Five Paise

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic One Hundred Sixty

143 1.00 front plate , modules erected with necessary connection. As desired by Each 160.59 Rupees and Fifty Nine

Engineer In charge (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Paise

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic One Hundred Sixty

144 1.00 front plate , modules erected with necessary connection. As desired by Each 160.59 Rupees and Fifty Nine

Engineer In charge (8) Computer RJ-45 socket Cat. III Paise

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Eighty Two Rupees and

conductor FRLS PVC insulated stranded wire of green colour for earth Eighty Two Paise

continuity of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC One Hundred Twelve

insulated stranded wire of green colour for earth continuity of following Rupees and Eleven Paise

size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

(h) 4 wire 6 sq. mm Two Hundred Sixty

147 80.00 Mtr 260.58 Rupees and Fifty Eight

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

Twenty Four Rupees and

148 882.00 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 24.24

Twenty Four Paise

following dia of pipes, in approved manner as directed. (a)20 mm

Supplying & erecting Delton or approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped with FRLS

PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for

Twenty Rupees and

149 60.00 telephone wiring & confirming to C-DOT erected in existing pipe. of Mtr. 20.20

following size of conductors & nos.of pairs. With necessary connections.[A]

Conductor Size 0.5 mm(a) Unarmoured 2) Two Pairs

Supplying & erecting approved make LAN cable of following size in existing Seventy Six Rupees and

pipe as per direction [D] CAT - 6 e Seventy Six Paise

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.9, THD

< 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED Five Hundred Thirty Five

151 122.00 driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Each 535.30

Rupees and Thirty Paise

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral driver (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.9, THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting Two Hundred Twenty

152 22.00 required LM-79 & LM-80 Certificates)(NOTE: Below description have shown Each 220.18 Rupees and Eighteen

ranges of Wattage capacity of LED fittings.The Engineer incharge may select Paise

any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (i) 5-9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.9, THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting Seven Hundred Fifty

153 60.00 required LM-79 & LM-80 Certificates)(NOTE: Below description have shown Each 758.51 Eight Rupees and Fifty

ranges of Wattage capacity of LED fittings.The Engineer incharge may select One Paise

any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to Seven Thousand Two

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED Hundred Sixty Six

driver efficiency > 85 %.( fittings required LM-79 & LM-80 Rupees and Ninety Five

certificates)(NOTE: Below description have shown ranges of Wattage Paise

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.(iv) above 90 to 120 watts Cat-lll

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release Six Thousand One

155 2.00 suitable to work on A.C. supply 50 c/s. with all internal connections, Each 6173.12 Hundred Seventy Three

spreader tinned copper & complete erected in existing 16 G.M.S. housing. Rupees and Twelve Paise

ICS=100% of ICU only Cat III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

One Thousand Four

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

Hundred Ninety Two

156 2.00 appropriate nos. of MCBs.(The DBs should be used of same company of Each 1492.78

Rupees and Seventy

MCB to be used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-43) (iv)12 way

(B) three phase incoming and single phase horizontal type outgoing Per Two Thousand Three

phase isolation type (PPI) (b) sheet steel double door (i)4 way Hundred Thirty Nine

Rupees and Sixteen

Providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity 10 One Hundred Twelve

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Rupees and Eleven Paise

Providing & erecting 240 V MCB double pole switch for motor & inductive

Two Hundred Ninety

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

159 16.00 Each 299.97 Nine Rupees and Ninety

existing box having following capacity (A) 6 to 32 Amp. Cat.III

Providing and fixing printed instruction chart both in English and Gujarati

One Hundred Thirty

and duly framed with front glasses, for treatment of person suffering from

160 1.00 Each 130.29 Rupees and Twenty Nine

Electric shock with minimum 50" diagonally size.

providing and erecting Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single phase 240 V,50Hz. having One Thousand Nine

161 2.00 characteristic of quick action & tripping with all advance feature & do not Each 1969.50 Hundred Sixty Nine

incorporate any electronic component. for following Max. rating erected as Rupees and Fifty Paise

directed (i) 25 Amps.DP Cat. III

(ii) 40Amps. DP Cat. III Two Thousand Two

Hundred Thirty Five

Rupees and Thirteen

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Six Hundred Sixty Eight

163 4.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Each 668.62 Rupees and Sixty Two

having following capacity (b)40 Amp. Cat.III Paise

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

Eight Thousand Fifty

current rating 125A. with Fixed thermal & magnetic release suitable to

164 1.00 Each 8055.76 Five Rupees and Seventy

work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, Ten Thousand Four

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient Hundred Sixty Eight

nos. of hinged doors, handles with locking arrangement and rubber Rupees and Sixty Five

gasket,heavy duty end terminal connection,danger notice board,necessary Paise

ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.(A)

locally fabricated panel board (i) with 350 mm depth

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air

Two Thousand Eight

delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

Hundred Eighty Five

166 67.00 2019), THD < 10%, with remote unit for Speed Control and all remaining Each 2885.57

Rupees and Fifty Seven

accessories including safety pin, nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by

Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge One Hundred Eight

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with Rupees and Seven Paise

necessary finishing.

Supplying & erecting single phase approved make industrial exhaust fan

Two Thousand Fifty Four

suitable for medium duty ring mounted low noise operation suitable for

168 10.00 Each 2054.34 Rupees and Thirty Four

medium duty having following dia size and maximum speed in RPM [A]

mm dia 900 RPM Cat.II

Providing suitable M.S. louver shutter of the Exhaust fan. Three Hundred Sixty

169 10.00 Each 368.65 Eight Rupees and Sixty

Supplying and erecting approved make Pedestal Circulatory fan A.C. 230 V. Four Thousand Twenty

170 10.00 50 Cy/s. 600 mm sweep and adjustable height complete with guard, & Each 4023.84 Three Rupees and Eighty

standard lead flexible wires and plug top. Cat.II Four Paise

Supplying and erecting approved make oscillating type bracket fan A.C.

Two Thousand Five

23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment

171 20.00 Each 2534.09 Hundred Thirty Four

and rotary tilting device complete with guard, flexible Core plug top

Rupees and Nine Paise

complete erected with lead wires as directed. Cat.II

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe One Hundred Twenty Six

172 34.00 down rod erected duly painted for fan complete with proper insulation Mtr. 126.25 Rupees and Twenty Five

without leakage and earthing. Paise

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be Fifty Five Thousand

comprising of hermetically sealed compressor, fan motor, condensing unit, Eight Hundred Ninety

water tank surrounded by evaporating, coil, thermostats, relay Three Rupees and Forty

etc.complete with necessary inlet & outlet connection. The body of water Paise

cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity Twenty Nine Thousand

80 psi, mention with 40 psi inline type post carbon filter auto low & high One Hundred Eighty

pressure switches with following size of storage tank & LPH capacity & Seven Rupees and

erected as directed with one year comprehensive maintenance Ninety Nine Paise

guarantee.[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

(A) GENERAL DESCRIPTION OF LIFTS.[1] GEAR LESS LIFT DRIVE comprising of

High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2]

Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation

which shall be full collective selective operation hall call demand response,

UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase

reversal relay and safety controls.[3] Car with M S platform with bracings of

adequate size and to sustain the impact load cabin + passenger with safety

factor of fire for steel and side panels of Stainless steel of sheet of grade

175 0.00 0 0.00 No Rupees

304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED

ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of

engineer in charge. Car doors shall be of stainless steel grade 304, hairline

finish with centre opening / telescopic automatic doors. Car panel will also

be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor

switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully automatic

centre opening/ telescopic opening made of hairline finish steel grade of

304 with key holes and infrared curtains with Unlocking facility from

outside [5] Appropriate battery operated emergency light in the car along

with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.[6] Digital

scrolling indicator system for up-down arrow along with floor position

indicator shall be provided inside the car and at all floors.[7] Full height

infra red curtain with multiple cross / crossing light beams shall be

provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly

of passenger capacity with Manual Rescue Operation ( Manual Cranking

0.00 0 0.00 No Rupees

Facility). [9] Audio visual indication in the lift car showing over loading shall

be provided such that doors kept open till excess load is removed.[10]

Spring buffers/PU Buffers shall be provided.[11] Car fan as per passenger

capacity with automatic sleep timer shall be provided.[12] Voice

annunciator with suitable music shall be provided in lift car. [13] Self

diagnostics system for operational and safety parameters shall be provided

in control panel.[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of calibration

certificate submission, door key holes in the floor doors, fireman switch

shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In

the hoist way fascia plate shall be provided without any extra cost, where

ever required as / if directed by engineer in charge.[17] Permanent wiring

with necessary safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift machine room and

lift well with proper numbers of light points, with fixtures, exhaust fan and

plug points shall be provided by the agency. Only 3 phase Power Supply Nine Lac Seventy Two

shall be made available by department in lift machine room. Necessary Thousand Seventy Six

Earthing as per Lift Act/Rules shall be arranged by Lift Agency.[18] Any civil/ Rupees and Fifty Two

electrical works for additional and alteration in lift shaft and machine room Paise

related to erection of lift shall be made by lift agency without any extra

cost. (granite/marble fixing around all landing door openings are not in lift

agency’s scope.)[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary permission from

lift inspector and other authorities.[20] acrylic transparent licence/display

A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act

2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk

communication system. 3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing authority

5.agency has to provide third party insurance upto completion of free

0.00 maintenance period and submit the document for the same.[21] Car Panel 0 0.00 No Rupees

Operating Buttons with floor position indicator/buttons must be of Auto

Glow type clearly visible when view from inside cabin.[22] For Physically

Handicapped person Full Length Handrails of hairline finish steel grade of

304 should be provided at appropriate height on the Rear & Side Wall

Panels in Lift Car.

4/5/6 Passengers, Ground plus 1 upper floor with Rated Speed of

0.00 m/sec., (B) With General Specification attached herewith. Cat.III 0 0.00 No Rupees

Supplying & erecting approved make Lift Announcing solid state system in

the Passenger/ Stretcher lifts having AC2/ACVV/ACVF drives & automatic

doors only. The system comprising following features & facilities.(i)

Announcing floor message, message to close period (ii) Announcing

Seventeen Thousand

‘Emergency Message’ when lift is stuck between floors due to power failure

176 1.00 EACH 17119.50 One Hundred Nineteen

or any other reason. (iii) Instrumental Music between floor announcing.

Rupees and Fifty Paise

(iv) Announcement in English / Hindi & Gujarati Languages..(v) Flexible to

accommodate special per-programmed message such as name of the

building /office. (vi)Volume adjustment control

Providing & erecting approved make overload non-start feature & overload

warning Indicator system in the lift with making use of sound isolated

floating platform & micro switches on SI frame to get sensation of live load

Thirty Two Thousand

inside lift cage at any given moment, with provides new fixtures of overload

Five Hundred Twenty

177 1.00 warning inside lift cage with new relay in the existing control panel to EACH 32527.05

Seven Rupees and Five

activate ‘Overload Non-Start Function with carrying out additional wiring

including laying of new travelling cable, include minor civil work & without

changing the existing capacity speed stops, travel & operation of the

SITC of Controller Public address and emergency sound system control unit

Control and routing of 4 simultaneous audio channels

Two Lac Twenty Two

One controller supports 12 zones, expandable up-to 492 zones with 24-

178 1.00 EACH 222325.24 Hundred Twenty Five

Four controllers can be networked using OMNEO interface module

Rupees and Twenty Four

EN 54-16 and ISO 7240-16 system certification (Including Five year free

maintenance with guarantee)

SITC of Power amplifier, 2x500W 2 ✕ 500 W class-D power amplifier

(70/100 V output) Two Lac Nineteen

Low power consumption in standby mode Thousand Eight Hundred

Excellent sound quality, high signal-to-noise ratio Sixty Two Rupees and

EN 54-16 and ISO 7240-16 system certification (Including Five year free Eighty Six Paise

maintenance with guarantee)

SITC of Call station Call station with soft touch button for PAVIRO system

15 freely programmable buttons

Seventy Eight Thousand

Customization via built-in display and keys

Nine Hundred Thirty

180 1.00 Provision for installing emergency button and key switch EACH 78937.56

Seven Rupees and Fifty

EN 54-16 and ISO 7240-16 system certification (Including Five year free

maintenance with guarantee)

SITC of Ceiling loudspeaker, 6W, ABS, 2" Suitable for speech and music

Extreme compact size Three Thousand Three

181 64.00 Suitable for use in humidity-, chlorine- and salty environments EACH 3330.98 Hundred Thirty Rupees

Selectable 70 V ,100 V and 8 Ohm input and Ninety Eight Paise

EN 54‑24 certified (Including Five year free maintenance with guarantee)

SITC of Back box for LC3 speaker Easy to install

Five Hundred Thirty Six

Water- and dust protected

182 64.00 EACH 536.31 Rupees and Thirty One

Prevents sound traveling via the ceiling cavity to adjacent areas (Including

Five year free maintenance with guarantee)

SITC of Cabinet loudspeaker, 15W, black High-fidelity music and speech

Selectable 8 ohm, 70 V and 100 V inputs Nine Thousand Three

183 10.00 Compact yet robust ABS enclosure EACH 9380.88 Hundred Eighty Rupees

Supplied with adjustable mounting bracket and Eighty Eight Paise

Complies with international installation and safety regulations (Including

Five year free maintenance with guarantee)

SITC Of 9 U Rack Fifteen Thousand One

Hundred Fifty Rupees

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

Forty Six Rupees and

185 200.00 grade ISI marked copper wires of following size to be erected as directed. e) Mtr. 46.46

Forty Six Paise

1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

One Hundred Forty

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

186 300.00 Mtr. 140.39 Rupees and Thirty Nine

clamps or in existing trench / pipe of following size of cables (c) 4 core

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Two Hundred Eighty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

187 140.00 Mtr. 284.82 Four Rupees and Eighty

or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq.

mm ( 25 Sq.1/2 mm core)

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth for laying of cable. below Sixty Two Rupees and

ground / road surface for enclosing cable and back filling the same to make Sixty Two Paise

ground as per original. (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails, Thirty Eight Rupees and

insulating tape etc for following size of cables.(c) 2 to 4 core 10 Sq. mm Thirty Eight Paise

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete Seventy Five Rupees and

with out going tails, insulating tape etc for following size of cables.(B) 3 & Seventy Five Paise

1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to Fourteen Rupees and

switchgear terminals with brass/cadmium plated nut bolts in an approved Fourteen Paise

manner. (B) 10 Sq.mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to Twenty Rupees and

switchgear terminals with brass/cadmium plated nut bolts in an approved Twenty Paise

manner.(D) 35/50 Sq.mm.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible One Hundred Forty Six

193 200.00 Submersible copper cable approved make of following Size. (c) 3 Core x 4 Mtr. 146.45 Rupees and Forty Five

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Six Hundred Forty Seven

194 60.00 Submersible copper cable approved make of following Size.(g)3 Core x 25 Mtr. 647.41 Rupees and Forty One

Providing and erecting HOT deep Galvanized iron strip wire 8 to 16 SWG.

Seventy Seven Rupees

and Seventy Seven Paise

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to submit test

Five Thousand Seven

certificate) & having back filling compound of (B) Inner chemical (CCM

196 4.00 Each 5760.03 Hundred Sixty Rupees

Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017,

and Three Paise

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted.(b)For

Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg

Providing & erecting open well horizontal mono block pump set with cast

Ten Thousand Seven

iron body, complete for three phase submersible motor having [B] For

Hundred Thirty Four

197 4.00 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM Each 10734.28

Rupees and Twenty

@ 25 mtr head suitable for 50 mm dia delivery pipe Cat.II

Supplying & erecting approved make motor control cubical panel (Direct -

on - line) made from 16 G. CRCA sheet duly epoxy powder painted inside

and outside with hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing

Seven Thousand Seven

preventer, indicating lamps for R- Y - B phases, overload relay, Automatic

Hundred Twenty Two

198 4.00 water level controller, Ammeter, Voltmeter each with two way selector Each 7722.46

Rupees and Forty Six

switch incoming, wires duly socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected on angle iron frame grouted

on wall as directed. The isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only. (a) DOL up to 5.0 H.P.

Supplying submersible pump set for bore of 200 mm. dia. or more having

Eighty Four Thousand

phase motor capacity about 30 H.P. and discharge capacity having (a) (

Four Hundred Fifty Five

199 1.00 Stage) 650 to 440 L.P.M. discharge at the head 120 to 190 mtrs. suitable for Each 84455.19

Rupees and Nineteen

80 mm dia. delivery pipe. Cat.III

Supplying & erecting approved make 3 phase motor control cubical panel (

Star - Delta) made from16 G. CRCA sheet duly painted with epoxy powder

painted inside and outside with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses,

single phasing preventer cum water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum WLG, indicating lamps for R-

Twenty Three Thousand

Y- B phases, over load relay, Automatic water level controller, Ammeter &

Eight Hundred Twenty

200 1.00 Voltmeter each with two way selector switch incoming wires duly socket Each 23821.86

One Rupees and Eighty

Crimped, Panel to be erected on angle iron frame grouted on wall as

directed. Star Delta & main contactor, overload relay, thermal / Electronic

Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to

be erected on angle iron frame ground on wall. (f) S/D up to 30 H.P.

Supplying and erecting with leak proof materials, M.S. Heavy duty ISI

marked coupling having threads of 8 TPI/11 TPI suitable for ‘C’ class pipe to Seventy One Rupees and

take load of pump and pipe assembly of following size andTPI :- (A) 40mm( Seventy One Paise

1.5") dia. pipe 8 TPI

Add cost of leak proof complete welding surrounding pipe and coupling for

Eighty Nine Rupees and

202 1.00 use as column pipe for following size (B) 80 mm, 100 mm, 125 mm Each 89.89

Eighty Nine Paise

Cutting the heavy duty pipe and threading one end of pipe with 8 TPI /

Ninety Rupees and

203 1.00 TPI as per requirement and including to and fro charges.(A) 40mm ( 1.5") Each 90.90

Supplying and erecting B class Galvanized iron pipe having smooth finished

Two Hundred Forty Nine

bore of the pipe on both ends erected nuts and bolts along the pole / wall

204 60.00 Mtr. 249.47 Rupees and Forty Seven

shaping the pipe as per site requirement. Pipe dia as following. (c ) 40 mm

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting,

Six Thousand Eight

stud type terminal and arrangement for cable termination to be erected

205 6.00 Each 6874.06 Hundred Seventy Four

With Suitable foundation (Included) as per details given by manufacturer

Rupees and Six Paise

considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-

M16 Bolts and 600mm long J-Bolt.Approx Pole weight 46 kg

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

Eight Hundred Nine

206 6.00 ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper Each 809.01

Rupees and One Paisa

ground level with necessary curing and finishing in approved manner.( for

Providing and erecting street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and Five Hundred Sixty One

207 6.00 having spread of 1 mtr. length with suitable rise as per site condition & Each 561.56 Rupees and Fifty Six

suitable welded stiffener reducer and nipple with check nut complete Paise

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.[A] Single Arm

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min.

segments with early manual override switching for on & off without Two Thousand Two

208 1.00 influencing the program sequence with quartz time switch With power Each 2226.04 Hundred Twenty Six

reserve, housed in fire proof thermoplastic enclosure & transparent cover Rupees and Four Paise

terminal covers erected as required wire necessary connection erected as

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to Three Thousand Three

209 6.00 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED Each 3345.12 Hundred Forty Five

driver efficiency > 85 %.( fittings required LM-79 & LM-80 Rupees and Twelve Paise

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (i) above 36 to 48 watts Cat-lll

Supply, Installation, Testing & Commissioning of Indoor / Outdoor 3 MP IP

Dome Camera of 1/2.8" Progressive CMOS Sensor with resolution 30 fps

@ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field of View 40° ~ 80° (H),

30° ~ 60° (V) IR range upto 30 Mtr Smart IR Min. Illumination 0.1 Lux @

F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise Reduction ; Compression Twelve Thousand Six

210 36.00 Technology H.265, H.264, MJPEG with 3 simultaneous streams ; S/N Ratio Each 12609.24 Hundred Nine Rupees

51.5 dB Dynamic Range 110 dB WDR; two way Audio ; on board and Twenty Four Paise

SD/SDHC/SDXC card slot ; P-iris Lens & Digital Image Stabilization ; ONVIF

IP43, CE, FCC Class A, UL listed with all required accessories.

Supply, Installation, Testing & Commissioning of Indoor / Outdoor 3 MP IP

Bullet Camera of 1/2.8" Progressive CMOS Sensor with Night Vision and

with resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field

of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30/50 Mtr Smart IR Min.

Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise Twelve Thousand Six

211 4.00 Reduction ; Compression Technology H.265, H.264, MJPEG with 3 Each 12609.24 Hundred Nine Rupees

simultaneous streams ; S/N Ratio 51.5 dB Dynamic Range 110 dB WDR; two and Twenty Four Paise

way Audio ; on board SD/SDHC/SDXC card slot ; P-iris Lens & Digital Image

Stabilization ; ONVIF IP66, IK10, CE, FCC Class A, UL listed with all required

Supply, Installation, Testing and Commissioning of Network Video Recorder Sixty Five Thousand

with maximum 48 IP Cameras, up-to 4 HDD slots, simultaneous 1/4/9/16 Seven Hundred Eighty

212 2.00 channels playback and H.265+ / H.265 / H.264 recording supported. Each 65787.36

Seven Rupees and Thirty

Supply, Installation, Testing and Commissioning of 6TB Surveillance HDD for

Thirty Nine Thousand

30-days motion based recording storage

213 2.00 Each 39190.08 One Hundred Ninety

Rupees and Eight Paise

Supply, Installation, Testing and Commissioning of PoE Switch (24 Ports x

Seventy Four Thousand

Six Hundred Thirty Four

Rupees and Thirty Nine

Supply, Installation, Testing and Commissioning of Cat6 UTP 24 Port Loaded Eighteen Thousand Six

Patch Panel and 24 Each 1 meter Cat6 UTP Patch Cord Hundred Fifty Eight

Rupees and Ninety Four

Supply, Installation, Testing and Commissioning of 9U Network Rack with Thirteen Thousand

exhaust fan and 6 Socket Power Strip Seven Hundred Five

Rupees and Seventy

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger, static Inverter & sealed

maintenance free SMF batteries. The charger having operating capacity for

input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load

power factor with battery, over/under voltage output with over load & Forty Seven Thousand

217 2.00 short circuit protection equipment. The system housed in CRC sheet duly Each 47268.00 Two Hundred Sixty Eight

powder coated paint with following power backup.with MS painted Rupees

batteries stand, 10% Overload capacity for momentary load. (B) 2KVA with

SITC of 43 Inch 4K (108 cm) Ultra HD (4K) , HD Technology & Resolution

Ultra HD (4K), 3840 x 2160,HDMI- 3, USB- 1,Built In Wi-Fi- Yes,Model Name Forty One Thousand

218 2.00 UA43AUE60AKLXL Make: Samsung or equivalent Each 41117.10 One Hundred Seventeen

Rupees and Ten Paise

Drilling 250/300 mm dia pilot bore at above village site in all strata by mud Seven Hundred Fifty Six

219 380.00 flush direct rotary rig/reverse rotary rig. From 0.00 mt to 220 mt . R.M. 756.49 Rupees and Forty Nine

Reaming of 300 mm dia bore hole including assembling , jointing lowering

Two Hundred Sixty

housing casing strainer pipes and gravel and assemble item with gravel

220 180.00 R.M. 263.61 Three Rupees and Sixty

packing and clay packing 500 mm dia hole for 200 mm dia pipe

Reaming of 250 mm dia bore hole including assembling , jointing lowering

Four Hundred Sixty Five

housing casing strainer pipes and gravel and assemble item with gravel

221 200.00 R.M. 465.61 Rupees and Sixty One

packing and clay packing 500 mm dia hole for 200 mm dia pipe

Supply of clay ball having Size of 25 mm to 50 mm Seven Hundred Fifty

222 20.00 C.M. 758.51 Eight Rupees and Fifty

Supply of gravel of Selected Size 4 mm to 10 mm Two Thousand Forty

223 22.00 C.M. 2049.29 Nine Rupees and Twenty

Supply of Cement Six Thousand Three

224 0.50 M.T. 6365.02 Hundred Sixty Five

Rupees and Two Paise

Cement Sealling

Thirteen Thousand Four

225 3.00 Job 13405.73 Hundred Five Rupees

and Seventy Three Paise

Lowring of drop line & air line : Lowring 100 mm dia. Dropline and 32 mm

Twenty Eight Thousand

GI air line for devlopment of each water bering zone coming acros the full

226 1.00 Job 28054.77 Fifty Four Rupees and

depth of tube well for each zone

Seventy Seven Paise

Lowring of drop line & air line : Lowring 200 mm dia. Dropline (Blind & One Hundred Forty Nine

227 180.00 Slotted pipe) and 32 mm GI air line for devlopment of each water bering R.M. 149.48 Rupees and Forty Eight

zone coming acros the full depth of tube well for each zone Paise

Development of tube well : Development of tube well zonewise with

Twenty Two Thousand

CFM / 300 PSI + Air Compressor up to avalibility of sand free discharge . The

Four Hundred Twenty

228 1.00 air Compressor should run minimum for Six of up to avalibility of Sand free L.S. 22427.05

Seven Rupees and Five

Electrologing test for tub well . Twelve Thousand One

229 1.00 Job 12120.00 Hundred Twenty

Supply of ERW 250 mm dia. Blank pipe IS 3589 (7 mm thick. ) (Including Three Thousand Six

230 150.00 GST) R.M. 3605.70 Hundred Five Rupees

and Seventy Paise

Supply of ERW 250 mm dai. V wire Strainer pipe heavy duty slot size 1.00 Two Thousand Five

mm Hundred Fifty Nine

Rupees and Thirty Four

Supply and delivery of PVC blind pipe 200 mm dia as per IS: 12818 Seven Hundred Eighty

232 100.00 R.M. 782.75 Two Rupees and Seventy

Supply and delivery of PVC slotted pipe 200 mm dia as per IS: 12818 Eight Hundred Eighty

233 80.00 R.M. 883.75 Three Rupees and

Seventy Five Paise

0.00 Supply of bore material for 250 mm dia. Pipe 0 0.00 No Rupees

(A) M.S. bore clamp

Two Thousand Thirty

234 1.00 No 2037.91 Seven Rupees and

Ninety One Paise

(B) M.S. bore Plug

One Thousand One

Hundred Sixty One

Rupees and Sixty Two

(C)M.S. bail plug.

One Thousand Sixty Five

Rupees and Two Paise

(D) Steel bent plats

Ninety One Rupees and

Seventy One Paise

Supply of (A) M.S. bore clamp -for 300 mm dia. Pipe Two Thousand Four

Hundred Eighty Five

Rupees and Sixty One

Supply of (B) M.S. bore Plug-for 250 mm dia. Pipe Two Thousand One

Hundred Seventy Three

Rupees and Fifty Two

Supply of (C)M.S. bail plug.-for 300 mm dia. Pipe One Thousand Three

Hundred Twenty Nine

Rupees and Sixteen

Providing Electric moter driven submersible pump set 3PHASE Capacity

about 7.5hp having 135 LPM discharge @ 120 mt. head sutibal for 100 mm Twenty One Thousand

241 1.00 dai. Delivery pipe catagery 2.2 No 21990.30 Nine Hundred Ninety

Rupees and Thirty Paise

Providing & fixing control penal bord sutibal for above submersible pump Eight Thousand Four

set-D. O. L. up to 7.5 HP Hundred Sixty Six

Rupees and Eighty Three

Providing & fixing PVC insulated round submersible cable 1R x 3 C x 6.0 One Hundred Eighty

243 250.00 sq.mm. R.M. 180.79 Rupees and Seventy

Manufacture, Supply and Delivery of 80 mm Nominal dia UPVC Column

Four Hundred Three

Pipes including PVC Socket (Coupler), Density of Pipe 1.38 to 1.43 Gm per

244 200.00 R.M. 403.66 Rupees and Sixty Six

Cm3 , OD : 87.5 TO 88.2MM, Wall Thickness End : 9.8mm to 11.9mm, Berral

: 7.3mm to 9.0mm, Length: 3 Mtrs.

Providing and supplying in standard length ISI mark high density

Polyethylene H.D.P.E. Pipes suitable for potable water as per IS

Three Hundred Eighty

Specification no. 4984/1995 including all local and central taxes,

245 200.00 R.M. 380.77 Rupees and Seventy

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the dept. stores etc. comp. 110 dia.10kg/cm2

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end Eight Hundred Seventy

246 10.00 socketed with rubber ring, & fittings conforming to ISI 14735-1999 of R.M. 876.90 Six Rupees and Ninety

approved make for drainage system pipe line, pipe shall be jointed with Paise

each other with rubber lubricant.

Supplying of crushed stone aggregates, chippings etc. of hard stone of Five Hundred Forty Five

247 2.00 following nominal size free of disintegrated pieces deletarious and oraganic C.M. 545.63 Rupees and Sixty Three

mater and grading as per I.R.C. Code.(iii) 25mm Paise

Supplying of crushed stone aggregates, chippings etc. of hard stone of Four Hundred Eighty

248 4.00 following nominal size free of disintegrated pieces deletarious and oraganic C.M. 482.53 Two Rupees and Fifty

mater and grading as per I.R.C. Code.(ii) 40mm Three Paise

Spreading the stone aggregate including filling the interstices to required Two Hundred Sixty Eight

249 2.00 camber and gradient (excluding spreading of Blindage)(iii) 25mm to 50mm C.M. 268.92 Rupees and Ninety Two

size crushed stone Paise

I/We am/are willing to carry out the work at................................................... % above / below percent (should be written in figures and words) of the estimated rates mentioned

above. Amount of my / our tender works out as under.

* Estimated Amount * Estimated Amount

Put to Tender Rs/- 4,82,43,658.00 Put to Tender Rs/-

Net Tota Rs............ Net Tota Rs..................

* (Please strike out whichever is not applicable)

Notes 1 : - All works shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

Notes 3 -Rates quotes include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture,

Notes 4 - To be continued on additional sheets, if found necessary.

Notes 5 - Where there is a discrepancy between the rate in figures and words , The rates in words will govern.

Notes6 - Labour cess @1% (or as per the then prevailing rules of concerned department) of the work done amount shall be deducted from the bills.

Notes 7 - The bidder should quote his bid premium or rebate at the end of schedule B. If he do not wish to quote premium or rebate, he should indicate "at par" in the blank

space preceding "% above/below" in schedule- B

Notes 8 Works should be carried out under the supervision of project consultant appointed by GMC.The contractor have to follow their instructions after receiving necessary

approval / permission from engineer-in-charge of GMC and or Third party inspection shall be carried out by TPI, appointment by GMC. The Collection of materials for testing &

all other quality control test shall be carried out in the presence of Project Consultant and or TPI, appointed by GMC.

Signature of the Contractor