Construction Work of Anganwadi Kenra Building, Anganvadi Kendra No 6 Bhagunagar At Kadodara, Dist Surat Under 15 Percentage Vivekadhin Grant Year-2025-26. Third Call

NAME OF WORK :-CONSTRUCTION WORK OF ANGANWADI KENRA BUILDING

LOCATION :- ANGANVADI KENDRA NO - 6 BHAGUNAGAR AT- KADODARA, DIST - SURAT

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

(i) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:6 (1-cement : 6-coarse sand including levelling

up etc. complete (more than 10 ton)

Providing and laying cement concrete 1:3:6 (1-Cement :

3- coarse sand : 6- Graded stone aggregates

mmnominal size) and Cummring complete excluding

cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete M.200 and

Cummring complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) 10.10 4055.89 Cu.Mt.

Foundations, footings, Base of columns and Mass

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the

cost of formwork but excluding the cost of reinforcement

for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional

area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the

cost of formwork but excluding the cost of reinforcement

for R.C.C. work in (B) COLUMNS:(ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Brick work using common burnt clay building brick having

crushing strength not less then 35Kg/Sq.Cm. In

foundation and plinth in cement mortar 1:6 (1 Cement :

fine sand) (B) Conventional

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B) Conventional

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm thickness including watering 8.00 301.78 Cu.Mt.

ramming and consolidating etc. complete

Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete

Providing and laying cement concrete 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Brick work using comon burnt clay building brick having

crushing strength not less then 35Kg/Sq.Cm. In

foundation and plinth in cement mortar 1:6 (1 Cement : 6 23.00 4503.04 Cu.Mt.

fine sand) in super structure above plinth level up to floor

two level (B) Conventional

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

mm nominal size) for R.C.C lintel including finishing 0.37 10219.39 Cu.Mt.

smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

Providing and laying cement concrete 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) for reinforced concrete Chhajjas not

exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface

centering and formwork and curing complete excluding

cost of reinforcement.

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. 9.90 1829.74 Sq.Mt.

(B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 3.40 1713.70 Sq.Mt.

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/mt with colour anodized alluminium frame for 0.40 1175.56 Sq.Mt.

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing 15mm thick cement plaster in single coat on

brick/concrete wall for interior plastering upto floor two

level finished even and smooth in (i) Cement mortar 1:3 209.00 231.02 Sq.Mt.

(1 cement : 3 sand) with one smooth cement neat

finished last layer.(Smooth finished)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i)Cement mortar

1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on wall up to

height 10meters above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 107.80 315.69 Sq.Mt.

8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand)

Providing and laying 24" x 24" vetrified 8mm thick tile

Flooring over 20mm (average) base of cement mortar

1:6 (1 Cement: 6 Coarse sand)on new surface or fixing

on existing flooring by adhesive material including 44.10 1467.72 Sq.Mt.

dismentalling of existing flooring and jointed with colour

cement slurry including finished with flush pointing &

cleaning the surface etc.Complete for flooring

Providing and laying Vitrified tiles 8 to 10 mm thick , 24''

x 24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Providing and laying Granite Slab (18 mm thick) 1 side

Polished stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.

1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed

with gray cement slurry including rubbing and polishing

Providing and Laying controlled cement concrete M.150

and finishing smooth with curing etc. complete including

the cost of formwork but excluding the cost of 6.90 6771.66 Cu.Mt.

reinforsement for R.C.C work in (iii) Slabs having more

than 10 cm and upto 13 cm. thickness

Providing T.M.T. Fe-500 bar reinforcement for R.C.C.

work including bending, binding and placing in position 3940.00 69.36 Kg

complete up to floor two level

Providing and fixing M.S. Grills of required pattern to

wooden frames of window etc. with M.S. Plate at required

spacing & frame around, squre or rouhnd bar with

rounded headed bolts & nuts or by screws, coated with

necessary red oxide and three coats of oil paint of

shaded approved by engineer in charged (A) Plain grill

(a) Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead. 3.40 128.95 Sqmt.

(b) Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter.

(a) Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats of

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

(B)Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

(a) Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats of

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

(BFinishing wall with weather proof exterior Plastic paint

on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete

(Over Outer side Plaster) 107.80 160.85 Sq.Mt.

Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over

the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement mortar

1:5 (1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

Providing And laying broken china mosaic flooring for

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar out upto surface

using white cement including rounding off junctions and 51.12 779.70 Sq.Mt.

extending them upto 15cm along the wall in smooth

Cummrves, clearing with water or oxalic acid etc. over

the brickbat water proofing carried out as directed by

Engineer In-charged.

Construction of cooking platform 60 cm wide of 30 mm

thich polished kota stone with brick masonary support

inclduing the approved quality steel sink in the size of

600x400x150 mm including faucetss, fixing the sink in 3.40 2694.77 Rmt.

the stone plateform with base pipe and fixtures and kota

stone shelves as per the Drawing and design etc.

Providing and laying the P.V.C. rain water out let pipe of

ISI Mark approed quality make equvalant with necessary

bend, plug, jali, clamps etc complet. 110 mm dia.

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be

not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line. (more than 10 ton)

R.C.C. Pipe (Horizontal Cast) Providing and supplying

ISI Standard R.C.C. pipes(of Sulphate Resisting

Cement) in standard lengths of following class and

diameter suitable for either collar joints or rubber ring

joints including all taxes, insurance, transportation. freight

charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. 20.00 628.08 Rmt

Note: One collar should be supplied with each full length

plain ended RCC pipe, cost included in rates below. One

rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 test pressure 0.7 kg/sq.cm 250mm Dia

L,L& J of R.C.C. Pipes Lowering, laying and jointing R. C.

C. pipes in C. M. 1:1 1/2 of following diameters in proper

position, grade and alignment at all level as directed by

Engineer-in-charge including conveyance from stores to 20.00 119.42 Rmt

site of work, labour, giving hydraulic testing as per ISI

Class NP2,NP3,NP4 (250mm Dia

Providing and laying (two level or slopes) and jointing

with stiff mixture of cement mortar in proportion 1:1 PVC

pipes following nominal internal diameters including 10.00 317.47 Rmt

testing of pipes and joints complete (B) 150mm dia

Providing and laying (two level or slopes) and jointing

with stiff mixture of cement mortar in proportion 1:1 PVC

following nominal internal diameters including testing of

pipes and joints complete (A) 100mm dia

Providing and fixing S.W. gully trap with C.I. Grating brick

masonry chamber and water tight C.I. cover with frame

of 300mm x 300mm size (inside) with standard weight (i) 1.00 1246.92 No.

Square mouth traps (C) 150mm x 100mm size - P type

Providing and fixing cast iron (spun) Nahni trap of the

following nominal diameter of self cleaning design with

C.I. Screwed down of hinged grating including cost of 2.00 638.05 No.

Cummtting and making good the walls and floors 100mm

inlet and 50mm outlet

Providing and fixing Wash down Water closet European

type W.C. pan with integral P or S trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 cement :

find sand) 100 mm size P or S trap for water closet

squatting pan Including jointing the trap with the pan and

soil in © mortar 1 :1 (1 cement : 1 coarse sand) in

cement mortar 1:3 (1 cement : 3 coarse sand) A pair of

white vitreous china 250 mm x 80 mm Foot-rest for long

pattern squatting pan water closet 12.5 liters low level 1.00 2824.97 No.

flushing cistern with a pair of C.I. or mild brackets

complete with fittings such as lead value less syphon

mm nominal. size brass ball valve with polythene float

C.P. brass handle unions and couplings for connection

with inlet, outlet and overflow pipes. (A) Vitreous China

(i) IN white colour Each G.I. inlet connection for flush

pipe with W.C. pan white color

Providing and fixing washbasin with single hole for pillar

tape with C.I. or M.S. brackets painted white, including

cutting holes and making good the same but including

fittings pillar tap, brass waste stopcock bottle trap and

M.I.fisher union fittings A) vitreous china: II. Flat back

washbasin 550 mm x 400 mm size (I) IN white colour

Providing and fixing M.I. Fisher union for washbasin or

sink A)32mmDia including all necessary fittings.

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

Providing and fixing in position cowel vent to pipes (1)

Providing and fixing gun metal check or non return full

way wheel valve (C) 25mm dia

Providing and fixing gun metal check or non return full

way wheel valve (A) 15mm dia

Providing and fixing screw down bib taps of following size

(B) Brass Chromium plated screw down bib tap (i) 15mm 3.00 186.43 No.

Providing and fixing ball cock of approved quality as

directed (A) Copper metal (i) 25mm dia

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary fittings 1000.00 3.95 Lit

and connection etc. complete on terrace

Providing of Bala Work for Anganwadi Like Wall

paintings, Measurements, Wall arts, Black board,

Nutrition chart,as per Annexure (A) Etc complete as per

Directed by Engineer Incharged.

Total Amount Rs…..

Total Amount Rs…..

Add 5.5% for Electric fitting Provison (Internal)Rs…..........

Total Amount Rs…..

Total Amount Rs…..

Say Amount Rs………..

I/We am/are willing to carry out the work @ ________% Above Below __________ Percentage

(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender

Estimated Amount Estimated Amount

Put to Tender Rs. 14,58,450.00 Put to Tender Rs.

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Kadodara Nagarpalika

Amreli Kadodara

Chief Officer President

Kadodara Nagarpalika Kadodara Nagarpalika

Kadodara Kadodara