Electrification of PreFab Carp Hatchery Unit at Mirzabagh Campus, University of Kashmir

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Havells/ Halonix/USHA /Crompton or eq make

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing/ fixing of 16 Amp switches socket (Make: Legrand, Hager, L&T, ABB, Havells or eq) combined Box/recess type

Wiring for Computer point with 1.5 sq.mm(Make: Finolex, Polycab or eq) with 1.5 sq.mm earth wire FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit (D plast/Tiger/Anchor make ), with modular switch with two sockets (Make: Legrand, Hager, L&T, ABB or Havells), modular plate, suitable GI box etc. from DB as required. Note: Rate of suitable conduit/channel and wall cutting and finishing is included in the above description.

Wiring for Heating point with 4 sq.mm(Make: Finolex, Polycab or eq) with earth wire (4 sq.mm) FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit (D plast/Tiger/Anchor make ), with modular 15 A switch with 15 A sockets (Make: Legrand, Hager, L&T, ABB or Havells), modular plate, suitable GI box etc. from DB as required. Note: Rate of suitable conduit/channel and wall cutting and finishing is included in the above description.

Group B Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm(Make: Finolex, Polycab or eq) FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit (D plast/Tiger/Anchor make ), with modular switch (Make: Legrand, Hager, L&T, ABB or Havells), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Note: Rate of suitable conduit/channel is included in the above description.

Supplying and laying of 2 core, armoured aluminium, XLPE or rubber insulated 10 sq.mm LT cable in surface/ recessed/ ground etc as required at site as directed by EIC (Make: havells, Finolex, Polycab or eq)

Providing and fixing of 63 A, 4P Manual Changeover in sheet steel enclosure of approved make (Generator)

Supplying and fixing 3 pin, 5 A ceiling rose on junction box/ wooden block including connections etc. as required ISI Marked Superior Quality

Supplying and laying (depth 2 feet below ground) of following size ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade. (Make: havells, Finolex, Polycab or eq) 3.5 X 35 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ including recessed medium class PVC conduit (Make: Finolex, Polycab or eq) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (D plast/Tiger/Anchor make ) Note: Rate of suitable conduit/ channel and wall cutting and finishing is included in the above description 25 mm

Earthing with G.I. earth ROD/ plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. but bolt & spring washer spaced at 50mm)

Supplying and fixing of 15 watt square/ round, recess/ surface mount LED down lights with high efficient LED's and glare free opal/ diffusers, commertial lights minimum 100lm/W(Make: Havells, Wipro, Halonix or eq)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board (of approved make), 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) of make Hager, Legrand, ABB, Siemens Note: Rate of suitable conduit/ channel and wall cutting and finishing is included in the above description 8 way , Double door(UPS, CP, Lights)

Supplying and fixing , 240/415 V, 10 kA, "C" curve, miniature circuit breaker/ RCCB/Voltage and current protection (of approved make)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand, Hager, ABB, Siemens

6-32 A Single pole MCB

40 A Double Pole MCB

63A Double Pole MCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required ISO 9001 Certified, CE Approved, Applicable BIS Standards of make Hager, Legrand, ABB, Siemens 4 way (4 + 12), Double door

(DSR 2.15.3) Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity urrent 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

Providing & Fixing of 63 amps microprocessor based MCCB TPN, 4pole 16KA, along with all accessories for HVTPNs confirming to BIS standards with ISI mark alongwith metal enclosure Make: Legrand, Hager, ABB, Siemens

Providing and fixing of 63 Amp, 10kA, C-Curve D/P MCB along with enclosure of required size.Make: Legrand, Hager, ABB, Siemens

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 35 sq. mm

Providing and Fixing of lighting fixture pressure die-cast aluminium IP66 roadway/ flood light type luminaries with high power LED(100-120W) (of make Havells, Philips or eq) with toughened glass 110 Lm/W

Supply, installation, testing & commissioning of minimum 1375VA 12V Pure Sine Wave inverter with 1x180AH 12V tubuler Battery of make Exide or eq. including suitable rack/trolley, input/output leads/Switch sockets etc. to make the system operational.

Providing and fixing of Ac points using 6 sq mm PVC FRLS insulated copper wire (Make: Finolex, Polycab or eq) through 1 inch heavy duty PVC conduit pipe (D plast/Tiger/Anchor make ) and providing and fixing of 32 Amp DP MCB C curve (Make: Legrand, Hager, ABB, Siemens), with BOX point taken up to D.B. duly tested and commissioned in all respects complete. Note: Cost of 1 inch heavy duty conduit is included all items included like wire, box, switches etc.

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates