Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 CrAdmitted-Finance | ₹3.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.8 Cr+₹1.3 Cr (36.0%)Admitted-Finance A 27 NAVBHARAT APARTMENT R C MARG CHEMBUR MUMBAI MAHARASHTRA MUMBAI MAHARASHTRA 400074 | MUMBAI SUBURBAN | MAHARASHTRA | 400074 | ₹4.8 Cr+₹1.3 Cr (36.0%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical 212 SHUBHAM COMMERCIAL COMPLEX PLOT NO 1 3 SECTOR 11 NEW PANVEL NAVI MUMBAI RAIGAD MAHARASHTRA 410206 | RAIGAD | MAHARASHTRA | 410206 | - | - | Rejected-Technical TECHNICALLY REJECTED |
| Sl No | Description | Qty | Unit | Jyotsna Enterprises L2 | Excellent Projects (I) Pvt Ltd L1 |
|---|---|---|---|---|---|
| 1.00Job 1. Hydro testing of various Heat Exchangers | |||||
| 2.00 | 1-A-1 E 209 (Part-A) | 1 | Lump sum | 59,419.78 ₹59,419.78 | 42,000 ₹42,000 Lowest |
| 3.00 | 1-A-2 E 209 (Part-B) | 1 | Lump sum | 68,962.23 ₹68,962.23 | 40,000 ₹40,000 Lowest |
| 4.00 | 1-A-3 Tube Plugging (2 plugs per tube) | 10 | Per Tube | 462.85 ₹4,628.5 Lowest | 1,500 ₹15,000 |
| 5.00 | 1-A-4 Seal welding at tube end | 10 | Per Tube End | 392.62 ₹3,926.2 Lowest | 1,200 ₹12,000 |
| 6.00 | 1-B-1 E 301 (Part-A & B) | 1 | Lump sum | 2,11,457.98 ₹2,11,457.98 | 93,000 ₹93,000 Lowest |
| 7.00 | 1-B-2 Tube Plugging (2 plugs per tube) | 10 | Per Tube | 471.79 ₹4,717.9 Lowest | 1,500 ₹15,000 |
| 8.00 | 1-B-3 Seal welding at tube end | 10 | Per Tube End | 379.83 ₹3,798.3 Lowest | 1,200 ₹12,000 |
| 9.00 | 1-C-1 E 302 B (Part-A & B) | 1 | Lump sum | 1,54,266.68 ₹1,54,266.68 | 93,000 ₹93,000 Lowest |
| 10.00 | 1-C-2 Tube Plugging (2 plugs per tube) | 10 | Per Tube | 453.5 ₹4,535 Lowest | 1,500 ₹15,000 |
Tender Value
Refer Docs
EMD Value
₹3 L
Closing Date
5 Nov 2020, 10:00 amClosed
PARAU MURMU
MES DEPT ROOM NO 25 ADMIN BUILD RCF LTD CHEMBUR MUMBAI-400074
Maintenance jobs to be carried out during Annual Turnaround of Ammonia-V Plant at RCF Ltd. Trombay unit
2020_RCFL_591428_1
ET-MES/251/L/2021/226
Open Tender
Miscellaneous Services
Item Rate
365 days
MES DEPT ROOM NO 25 ADMIN
AS PER NIT
15 documents required · 15 mandatory
₹0
₹3 L
Yes
26 Nov 2020
17 Oct 2020
5 Nov 2020
17 Oct 2020
5 Nov 2020
17 Oct 2020
Amount
Job 1. Hydro testing of various Heat Exchangers
1-A-1 E 209 (Part-A)
1-A-2 E 209 (Part-B)
1-A-3 Tube Plugging (2 plugs per tube)
1-A-4 Seal welding at tube end
1-B-1 E 301 (Part-A & B)
1-B-2 Tube Plugging (2 plugs per tube)
1-B-3 Seal welding at tube end
1-C-1 E 302 B (Part-A & B)
1-C-2 Tube Plugging (2 plugs per tube)
1-C-3 Seal welding at tube end
1-D-1 E 312 (Part-A & B)
1-D-2 Tube Plugging (2 plugs per tube)
1-D-3 Seal welding at tube end
1-E-1 E 509 A (Part-A & B)
1-E-2Tube Plugging (2 plugs per tube)
1-E-3Seal welding at tube end
1-F-1 E 509 B (Part-A & B)
1-F-2 Tube Plugging (2 plugs per tube)
1-F-3 Seal welding at tube end
1-G-1 NSGC gland steam condenser (Part-A)
1-G-2 NSGC gland steam condenser (Part-B)
1-G-4 Tube Plugging (2 plugs per tube)
1-G-4 Seal welding at tube end
1-H-1 E-102 (Part-A)
1-H-2 E-102 (Part-B)
1-H-3 Tube Plugging (2 plugs per tube)
1-H-4 Seal welding at tube end
1-I-1 I stage inter cooler of C-301 (Part-A)
1-I-2 I stage inter cooler of C-301 (Part-B)
1-I-3 Tube Plugging (2 plugs per tube)
1-I-4 Seal welding at tube end
1-J-1- II stage After cooler C301 (Part-A)
1-J-2- II stage After cooler C301 (Part-B)
1-J-3- Tube Plugging (2 plugs per tube)
1-J-4- Seal welding at tube end
1-K-1- Lube oil cooler of C-301 (Part-A)
1-K-2-Lube oil cooler of C-301 (Part-B)
1-K-3-Tube Plugging (2 plugs per tube)
1-K-4-Seal welding at tube end
1-L-1-E-309 (Part-A)
1-L-2-E-309 (Part-B)
1-L-3-Tube Plugging (2 plugs per tube)
1-L-4-Seal welding at tube end
1-M-1-E-310 (Part-A)
1-M-2-E-310 (Part-B)
1-M-3-Tube Plugging (2 plugs per tube)
1-M-4-Seal welding at tube end
1-N-1- Lube oil cooler of C-302 (Part-A)
1-N-2- Lube oil cooler of C-302 (Part-B)
1-N-3- Tube Plugging (2 plugs per tube)
1-N-4- Seal welding at tube end
1-O-1- Condensate cooler (Part-A)
1-O-2- Condensate cooler (Part-B)
1-O-3-Tube Plugging (2 plugs per tube)
1-O-4-Seal welding at tube end
Job 2. Hydro testing of various Pressure Vessels
R203 LT Converter
R204 LT Guard Converter
Job 3. Opening & boxing up of manhole covers of primary reformer transfer header, convection zone, F-103, F-202, F-501, PAC suction duct.
Opening & box-up of Primary Reformer transfer header Manholes, size: 20" NB x 300 #.
Opening & box-up of manholes at the bottom of Primary Reformer Convection Zone, size: 900mm x 900mm.
Opening & box-up of manhole at the bottom of Primary Reformer Convection Zone, size: 750mm x 750mm.
Opening & box-up of manholes on west side of convection zone for accessing the coils, size: 650mm x 500mm.
Opening & box-up of manhole cover at the bottom of AG pre-heater (F-103), size: 560 OD
Opening & box-up of manhole cover at the bottom of Auxiliary steam super-heater (F-202), size: 720 OD
Opening & box-up of manhole cover at the bottom of Start-up heater (F-501), size: 720 OD
Opening & box-up of manhole of PAC 1st stage suction duct, size: 20” NB x 150#
Opening & box-up of manhole of PAC suction/ silencer filter room, size: 750mm x 750mm.
Job 4 Erection and Dismantling of Tubular scaffolding.
Scaffolding inside equipment/confined space
Scaffolding outside equipments (Upto 24 meters height)
Scaffolding outside equipments (above 24 meters height upto maximum height of 57 meters)
Job 5 Replacement of various welded valves, pipes, pressure tappings & piping fabrication jobs.
M.S / C.S PIPING: for pipes sizes from ɸ½” to ɸ12” diameter
Dismantling of Piping
Erection of Piping
Fabrication of Piping (Per inch dia.) Pipes up to & including Sch.80 thick (ARC welding)
Fabrication of Piping (Per inch dia.) Pipes up to & including Sch.80 thick (TIG Welding)
S.S. PIPING: for pipes sizes from ɸ½” to ɸ12” diameter
Dismantling of Piping (Per inch dia. Per me. length)
Erection of Piping (Per inch dia. Per me. length)
Fabrication of Piping (Per inch dia.) Pipes upto& including Sch.80 thick
1) Arc Welding – SS 304/ 304L
2) TIG Welding – SS 304/304L
Replacement of Welded Valves (Sizes: ɸ1/2” NB to ɸ6” NB)
Up to 800# CS welded valves, per inch dia.
> 800# up to 2500# CS / AS (P11/ P22) welded valves, per inch dia.
Bending of ɸ½” Sch. 80 to ɸ¾” NB Sch. 80 CS/SS pipe, per bend
CS/ AS Piping (ɸ2” NB Sch. 160 to ɸ6” NB Sch. 160)
Fabrication of CS Piping (Per inch dia.), TIG Welding
Fabrication of AS (P11/ P22) Piping (Per inch dia.), TIG Welding
Job 6. Gasket replacement of various flanges
Gasket replacement of furmanited flanges:
10" NB x 1500# (clamped)
6" NB x 1500# (clamped)
18" NB x 600# (clamped/ caulked)
16" NB x 600# (clamped/ caulked)
6" NB x 600# & 8” x 600# (clamped/ caulked)
3" NB x 600# & 4” x 600# (clamped/ caulked)
2" NB x 600# (clamped/ caulked)
18" NB x 300# (clamped/ caulked)
6" NB x 300# & 8” x 300# (clamped/ caulked)
3" NB x 300# & 4” x 300# (clamped/ caulked)
2" NB x 300# (clamped/ caulked)
16" NB x 150# (clamped/ caulked)
10" NB x 150# & 12" NB x 150# (clamped/ caulked)
6" NB x 150# & 8" NB x 150# (clamped/ caulked)
3" NB x 150# & 4" NB x 150# (clamped/ caulked)
2" NB x 150# (clamped/ caulked)
B. Gasket Replacement of various flanges Flange rating 150 # -
Flange rating 300 #
Flange rating 600#
Job 7.Blinding and de-blinding of various flanges
Job 8 Hot and Cold insulation jobs of pipelines & equipments
A. RATES FOR COLD INSULATION OF POLYURETHANE FORMED SECTIONS (Pipe section for pipe size up to 24 Inch diameter and slabs for tanks /vessels /equipment etc.)
Supply of PUF
Labour cost for application of material /aluminium sheet/ss Foil /SS Band including Screws/tarfelt etc. and supply of all other materials so as to complete the insulation job
Removal of all existing old insulation material inclusive of Aluminium sheeting etc. for all thk of insulation
B. RATES FOR HOT INSULATION (Preformed Pipe section for pipe up to 10 Inch diameter and machine stitched resin bonded mineral wool for piping above 10”NB /vessels /equipments /turbines etc..)
Supply of machine stitched resin bonded mineral wool with wire netting etc.
Labour cost for application of material and aluminium sheet/ss Foil /SS Band including Screws/tarfelt etc and supply of all other materials so as to complete the insulation job.
Removal of all existing old insulation material inclusive of Aluminium sheeting etc for all thk of insulation
C. SUPPLY OF AL SHEET AND SS FOIL
22SWG Plain Aluminium sheet with anciliaries
Supply of SS-304 bands of 20 mm width x 24 SWG
Supply of 0.1 mm Thick SS Foil
D. Insulation Jobs on Turbines
CO2 HP turbine casing: Lump sum charges for scaffolding, removal of old insulation and re-insulation with cera blanket, tying with SS wire and binding strip and applying POP.
CO2 LP turbine casing: Lump sum charges for scaffolding, removal of old insulation and re-insulation with cera blanket, tying with SS wire and binding strip and applying POP.
Job 9 Removal & box-up of various flanged valves for reconditioning
1" NB x 800# (Flanged Gate/ Globe valves)
2" NB x 150# (Flanged Gate/ Globe/ ball/ diaphragm valves)
1 ½" NB x 600# (Flanged Gate/ Globe valves)
2" NB x 300# (Flanged Gate/ Globe valves)
3" NB x 300# (Flanged Gate/ Globe valves)
4" NB x 600# (Flanged Gate/ Globe valves)
4" NB x 150# (Flanged Gate/ Globe valves)
6" NB x 150# (Flanged Gate/ Globe valves)
8" NB x 150# (Flanged Gate/ Globe/ ball/ diaphragm valves)
10" NB x 150# (Flanged Gate/ Globe/ ball/ diaphragm valves)
10" NB x 300# (Flanged Gate/ Globe valves)
10" NB x 600# (Trim heater outlet butterfly valve)
12" NB x 150# (Flanged Gate/ Globe valves)
28" NB x 150# (cooling water pump discharge Isolation valves)
24" NB x 600# (E-210 outlet butterfly valve)
18" NB Flow Control Valves / Distributor valves of cooling tower
Job 10 Reconditioning / Repair / Easing of gate/globe/NRV/butterfly valves at site.
Job1: Complete reconditioning and repair of isolation valves
28" NB Butterfly Valves
Above 150# up to 300 #
Above 300# up to 800#
Job2: Easing of isolation valves.
28" NB Butterfly Valves
Above 150# up to 300 #
Above 300# up to 800#
Job 11. Manpower Supply Per diem Rates
I-A- Manpower Supply for Mech. Dept. (Basic Rate for normal 12 Hours working per Day including Sundays and Holidays in Rs.)
Supervisor
Welder CS/AS/SS (With welding machine & consumables)
Gas cutter (With Gas cutting set)
Fitter / Grinder
Rigger
Helper (Semiskilled)
I-B-Overtime Rates in Rs. per Hour applicable after 12 normal hours working
Supervisor
Welder CS/AS/SS (With welding machine & consumables)
Gas cutter (With Gas cutting set)
Fitter / Grinder
Rigger
Helper (Semiskilled)
II- Manpower Supply for Prod. Dept.
Helper (Semiskilled)-For normal 12 hours working per shift
Helper (Semiskilled)-For Over time hours after 12 hours normal working shift
Job.12 Various CS/SS Patch Welding jobs.
Provision of CS / SS patch on various pipes / ducts / furnace walls as per scope of work
Job. 13 Reconditioning and repair of various high pressure valves.
Job I: Lump sum for complete reconditioning & repair of valve
CO2 Turbine Inlet I/V, Size: 6" NB x 2500#
BFW pump Discharge MOV, Size: 8" NB x 1500#
HS-MS PRDS MOV, Size: 12" NB x 1500#
Battery Limit HS I/V, Size: 12" NB x 1500#
Battery Limit HS MOV, Size: 12" NB x 1500#
HS MOV of NSGC, Size: 14" NB x 1500#
HS I/V of NSGC, Size: 14" NB x 1500#
NSGC Recycle suction, Size: 12" NB x 1500#
Job II: Rate for soft iron seal ring
CO2 Turbine Inlet I/V, Size: 6" NB x 2500 #
BFW pump Discharge MOV, Size: 8" NB x 1500#
HS-MS PRDS MOV, Size: 12" NB x 1500#
Battery Limit HS I/V, Size: 12" NB x 1500#
Battery Limit HS MOV, Size: 12" NB x 1500#
HS MOV of NSGC, Size: 14" NB x 1500#
HS I/V of NSGC, Size: 14" NB x 1500#
NSGC Recycle suction, Size: 12" NB x 1500#
Job. 14 Replacement of channel head gasket of Trim Heater (E-209)
Replacement of channel head gasket of Trim Heater (E-209) as per scope of work
Job 15: CAPH manhole cover opening, internal cleaning, inspection and repair job.
Opening and box up of manhole covers of CAPH, assistance in cleaning of internals of CAPH, Removal and box up of CAPH air inlet duct using crane, fixing of diverter plates.
Internal diverter plate welding, shell patch welding and other internal repair jobs
Job 16: Painting of Reformer Cold Collector & RG Boiler
Painting of Secondary reformer, transfer header with temperature indicating paint as per scope of work.
Job 17: Assistance in refractory repair jobs in transfer header, primary reformer & convection zone
Erection of scaffolding inside equipment’s like primary reformer, convection zone, F202 Aux steam super heater
Erection of scaffolding outside equipments like CG boiler, primary reformer, convection zone
Fabrication and welding of anchors.
CS Patch welding job
Job 18: Various jobs related to cooling tower
I- Cooling tower distribution valve / flow control valve replacement job.
II- Repair of cooling tower desilting valve
III- Structural Steel Support job in cooling tower
Fabrication and Erection of new structure
Dismantling of old Structure
charges for erection & dismantling of scaffolding inside / outside cooling tower for cooling tower structure related jobs
Job 19: Hiring of torque tightening machine for various bolt tightening jobs
Hiring of electric motor driven hydraulic power pack) or pneumatically operated torque tightening machine along with box spanners & other accessories.
Rates per unit per 12 hours shift basis (including on charges are inclusive of Sunday and holiday)
Job 20: Removal of BFW booster pump (P-207) and dismantling of connected pipelines
Dismantling of Inlet and Outlet lines (Size: Ø6" NB x Sch. 160) along with isolation valves and removal of BFW booster pump. Charges are inclusive of scaffolding, removal of insulation and liasoning with IBR authorities.
Dismantling and removal of auxiliary piping (size: ؾ" NB to Ø2" NB) connected with BFW booster pump. Scaffolding charges will be paid separately for this job.
Charges of IBR weld joints (Size: Ø6" NB x Sch. 160) in TIG welding. Charges are inclusive of scaffolding, DP testing, Radiography and liasoning with IBR authorities are inclusive.
Charges of NON-IBR weld joints (size: ؾ" NB to Ø2" NB sch. 80) in TIG welding. Charges are inclusive of DP testing are inclusive. Scaffolding charges will be paid separately for this job.
Job 21: Rectification/Provision of wooden supports under liquid ammonia line.
Rectification / repairing of structural support. Fabrication & erection of new structural support
Provision of wooden support to liquid ammonia line as per scope of work
Job 22 Maintenance of ID Fan dampers and damper bearing replacement.
Charges for maintenance of dampers as per scope of work without replacement of any bearing
Charges for bearing replacement (32 nos. UCFL 206 JD1& 2 nos. UCFL 208 JD1)
Job 23 Various structural steel fabrication & erection jobs
Repairing / Strengthening of old Structures
Dismantling of old Structure
Fabrication and Erection of new structure
Replacement of gratings
Job. 24 Piping modification job for Ammonia Condenser (E-509)
Fabrication of Ammonia service pipeline with TIG welding (size: 2” NB to 12” NB sch. 40)
Fabrication of Cooling water service CS piping with TIG welding (size: 20” sch. 40 and RF pads for providing 20” tapping on cooling water headers)
Erection of flanged isolation valves
Digging & Back filling
PCC/ Concrete Removal
Application of Protective coating (2+2 = 4 mm +/- 0.2 mm)
Job 25 Opening and box up of Demister Pads of Benfield flash vessel (V-320)
Opening & box-up of manhole covers (size: 24" NB x150 #)
Charges for replacement of first stage demister pad including opening & boxing up of weir plate & manhole cover
Charges for replacement of second stage demister pad including opening & boxing up of manhole cover
Charges for replacement of third stage demister pad including opening & boxing up of manhole cover
Charges for replacement of fourth stage demister pad including opening & boxing up of manhole cover
Charges for replacement of fifth stage demister pad including opening & boxing up of manhole cover
Opening & boxing up of First stage Weir plate segment
Job 26: Removal, shifting & re-installation of various control valves
Removal, shifting & re-installation of following control valves as per scope of work
02HIC-14; Size: 6" NBx2500# RTJ x 6" NBx2500# RTJ
07PIC-1A; Size: 6" NBx1500# RTJ x 8" NBx1500# RTJ
07PIC-1B; Size: 6" NBx1500# RTJ x 8" NBx1500# RTJ
02SD-14; Size: 8" NBx300# Serrated RF x 8" NBx300# Serrated RF
02 TIC-2A; Size: 2" NBx1500# RTJ x 4" NBx1500# RTJ
02 TIC-2B; Size: 2" NBx1500# RTJ x 4" NBx1500# RTJ
Job 27: E331 Process condensate cooler shell repair job.
Repair of E-331 process condensate cooler shell portion as per scope of work
Hydro testing of E331 process condensate cooler
Tube Plugging (2 Plugs per Tube)
Seal welding
Job 28: Removal, shifting & re-installation of screw compressor
Removal, shifting & re-installation of screw compressor as per scope of work
Job 29: PGR C301 IGV opening, dismantling, inspection and box up job
C301 IGV opening, dismantling, inspection and box up job as per scope of work
Job 30: SCO2 Turbine line orifice meter/flow nozzle installation
Fabrication & erection of piping, installation of flow nozzle on CO2 turbine HS inlet line as per scope of work (Size: 6” NB x Sch 160, MOC: P22)
Fabrication and erection of impulse piping (Size: 1/2” NB x Sch 160, MOC: P22)
Job 31: i) Process condensate/Urea condensate line replacement in 03/05 area, Nitrogen line replacement. ii) Nozzle modification for HS to MS PRDS Temperature control valve probe (3" NB x 1500#). iii) Provision of tapping and installation of isolation valve for cooling water line / Ammonia line / condensate line/DM water line for E509 & VAM. iv) HS to MS PRDS quench line fabrication and hook up with 60 kg/cm2 bleed line.
Dismantling of Piping
Erection of Piping
CS Fabrication of Piping (Per inch dia.) Pipes upto & including Sch.80 thick (ARC welding)
CS Fabrication of Piping (Per inch dia.) Pipes upto & including Sch.80 thick (TIG Welding)
CS/AS Fabrication of Piping (Per inch dia.) Pipes upto & including Sch.160 thick (TIG Welding).
Job 32: Installation of vent silencer in reformer section.
Installation of vent silencer in reformer section as per scope of work
Job 33: Repair of tube to tube sheet joints, hydro-testing & tube plugging job of Ammonia Condenser (E-509 A /B).
Charges for repair of all the 2813 nos. tube to tube sheet weld joints, tube expansion of Ammonia Condenser (E-509 A/B)
Hydrotesting of Ammonia Condenser (E-509 A/B)
Job 34: In-situ machining of LP boiler E301 north side end cover flange
Charges for Insitu machining of LP boiler E301 north side shell/dome flange as per scope of work
Job 35: Replacement of catalyst tubes and hairpin tubes of Primary Reformer (F-201).
Replacement of Reformer tube as per scope of work.
Replacement of inlet Hairpin tube as per scope of work.
Replacement of Outlet Hairpin tube as per scope of work
Job 36: Hiring of DG sets, diesel engine operated dewatering pumps & diesel engine driven compressor set for various jobs during shutdown
Hiring of DG set on per unit per day basis
Hiring of diesel engine operated dewatering pump on per unit per day basis
Hiring of diesel engine driven portable compressor on per unit per day basis
Job 37: Radiography & Stress Relieving (Pre /Post weld heat treatment) jobs
A-Radiography Inspection of weld joints in pipes, plates and vessels- Rate per Sq. inch of Film
For Stress Relieving and Preheating Thickness up to 2" – Rate per inch Dia.
Equipment Charges -
Charges for Stress relieving Equipment
Charges for Radiography Equipment
Job 38: Hiring of dehumidifier unit on rental basis, along with blowers, condensing unit and ducts
Mobilization (To & fro) of machines & all necessary material including Technician charges.
Rental of Dehumidifiers, Blowers, Condensing units Ducts & Technicians etc.
Job 39: Various jobs related to Process Air Compressor (PAC).
I- Replacement of various stage separators of PAC
Replacement of PAC 1st stage separator
Replacement of PAC 2nd stage separator
Replacement of PAC 3rd stage separator
II- Replacement of II stage suction duct of PAC
Charges towards replacement of II stage suction duct of PAC
III- Tube bundle removal, re-installation, hydro-testing & tube-plugging of PAC II & III stage cooler
A- PAC II Stage Cooler (E-423)
Charges for removal & box-up of tube bundle
Charges for hydro-testing
Tube Plugging (2 Plugs per Tube)
Seal welding
B- PAC III Stage Cooler (E-424)
Charges for removal & box-up of tube bundle
Charges for hydro-testing
Tube Plugging (2 Plugs per Tube)
Seal welding
IV- Assistance for Complete Overhauling job of Process Air Compressor
Charges for providing Assistance for overhauling of C1 (2MCL805-4) Compressor of Process Air Compressor as per the scope of work.
Charges for providing Assistance for overhauling of C2 (2MCL564) Compressor of Process Air Compressor as per the scope of work.
Job 40: Cooling Tower Pump check valve (size: 28" NB x 150#) overhauling job
Complete overhauling of CT pump check valve as per scope of work
Job 41: In-situ machining of baseplate and soleplate of CT pump (P801)
Insitu machining of baseplate and soleplate of CT pump (P801) as per scope of work
Job 42: Various hydro-jet cleaning jobs during shutdown period
Hydro-jet cleaning charges per 12 hour shift per machine (3 machines for 6 days)
Mobilization charges per machine per trip
Job 43: Replacement of Fabric Expansion Bellow B2 of combustion air duct of Primary Reformer
Replacement of Fabric Expansion Bellow B2 of combustion air duct of Primary Reformer as per scope of work
Jyotsna Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .