NIT NO. 23 ITEM NO. 08

Dismantling and removing the old monobloc pumpsets at Chatta Momgram and Madarrssa Hussain Bux from the base frame and inlet and outlet pipes and removing the old base frame with the help of gas cutter and cutter as per site requirement and also removing the old gate valves, NRV and sluice valves from delivery and inlet both sides and shifting the same to JE store as per directions of engineer in charge

S/o monobloc pumpsets rated capacity 10 HP, CI- Impeller, Gland Packing – Sealing, C-40 Shaft, TEFC Motor, IP-44, “F” –class Insulation with inlet and outlet size 80X65mm equivalent to KDS 1040+. Make: Kirloskar/Crompton/DJB approved

S/o monobloc pumpsets rated capacity 5 HP, CI- Impeller, Gland Packing – Sealing, C-40 Shaft, TEFC Motor, IP-44, “F” –class Insulation with inlet and outlet size 50X40 mm equivalent to KDS 550+. Make: Kirloskar/Crompton/DJB approved

S/o C.I. NRV of size 80 mm in CI. Make: Kirloskar/IVC/DJB approved make

S/o non rising sluice valve 80 mm with CI construction suitable for use with MS. Pipe. Make: Kirloskar/IVC/ DJB approved make

S/o Pressure Gauge of 150mm dia. Size having 0-100 range with accessories such as GI fittings, Bib cock etc. required to complete the work. Make:-H Guru/Fibeg/DJB approved make.

S/o Gate valve 65mm dia. Make: Sant/UNIK/DJB approved make

S/o Gate valve 50 mm dia. Make: Sant/UNIK/DJB approved make

Supply of Micro Controler base motor protection unit having following feature. a) Digital display of RYB Voltage one by one b) Digital Ampere Meter c) Unbalance Voltage (Phase Changing) d) Over Voltage e) Under Voltage f) Ampere Overload g) Dry Run (Ampere Under Load) h) Unbalance Ampere Make : Arihant / KHLM / Pump Guru / DJB Approved make

S/o automatic controller with RTC Timer including phase changeover, digital process controller which includes water sensor in inlet for turning the motor on when water comes in inlet having proper arrangement for setting time delay in turning on and when water is not there in inlet it should turn the motor off as per site requirement. Make : Arihant / KHLM / Pump Guru / DJB Approved make

S/o 10 HP DOL starter in sheet steel encloser with single phase protection feature suitable for 3ph, 415V, AC supply. Make : L&T / Schneider/DJB approved make

S/O MCB 63 Amp 4P. Make : L&T/ABB/Havells/Schneider/DJB approved make

S/o LED ( Motor ON) (Red, Yellow, Blue, Green) as per site requirement. Make: Vaish/L&T/DJB approved make

Providing / fixing of MS base frame for all monobloc pumpsets as per sample and site requirement and as per site requirement

S/o Fabricated of cubical type electrical LT panel made out MS sheet of 16/18 SWG with proper arrangement for fixing the panel on the wall as per site requirement tentative size of panel 1000mmx1000mmx500mm wide at chatta mom gram(2 nos.) and madarrssa hussain bux(1 nos.), and 500mmX500mmX300mm at Gali chamre wali(1 no). Panel should have interlocking arrangement and MS sheet dully fixed with nut and bolts for installation of electrical energy meter, Motor protection unit, Starter etc. duly painted with red oxide paint thereafter light grey color and sign of danger on panel.

Assembling, installing, testing and commissioning all above material(1 monobloc including accessories at Madarrssa Hussain Bux(10 HP) and 2 monobloc sets (10 HP) including accessories at Chatta Momgram and 1 monobloc (5 HP) including all accessories at Gali Chamre Wali) including monobloc sets, panel, fixing in panel and making proper electric connections for all electric equipments, fixing of sluice valves, NRV, gate valves and all equipments with proper support and rubber packing where required including any civil work required with proper finishing and taking safety precautions as per site requirement.

Painting all pipes, valves, MS frame, accessories etc with 2 coats of black enamel paint at Gali chamre wali, Gali Madarrssa Hussain Bux and Chatta Momgram OLB.

Gupta Brothers

ARIHANT ENGINEERS AND TRADERS