Jal Jeevan Mission (JJM)-JJM - NABL Accreditation - Setting up of Projector and Sound System for Conference Hall at Sub District Lab Aruvikkara, Nedumangadu, Thiruvanathapuram District.

Amount

Projector & Sound System

OD148985/2022-2023:Supplying and Installing 0.91 to 2.5 Multimedia Projector (MMP) With 800 x 600 (SVGA) Resolution One Chip DLP technology, 3600 Brightness (Lumens), 22000 Contrast Ratio (Minimum) (pixels )( X :1 ), UHP / UHE / UHM light of source, 4000 Minimum Life of Light Source (In Normal Mode) (Hours), with Lamp Hour Counter (In-Built), Inbuilt Speaker, 3D Projection Capability, Power Consumption in Normal Mode (260 Watt) & Power Consumption in Sleep Mode (1 Watts), Noise Level in Echo Mode (27dB) & Noise Level in Normal Mode (31 dB), Power Supply 210V-240V, 50 Hz, with Dimensions 294x218x110mm (Length x Breadth x Height) and 2.2kg weight, Operating Humidity ( 10 -90 % RH) including 1 Year or 1000 Hrs. On Site OEM Warranty for Light Source (Time or Life in Hours whichever is earlier). etc complete

OD149066/2022-2023:Supplying and providing 4FT X 6FT MAP TYPE PROJECTOR SCREEN MAP TYPE PROJECTOR SCREEN 84" Wall Mount type, 1080p and 3D Supported Display Technology, Matte white finish Display Fabric Material, Length x Width 50x67 inch, Anti UV Coating, Waterproof/Washable, 1.1 A+++ GRAD FEBRIC grain of 3kg weight with 2years On Site OEM Warranty etc. complete

OD203894/2022-2023:Supplying and providing Wooden Office Chair with Writing Pad

OD149140/2022-2023:Supplying and providing Wooden Podium design Gable end and modesty panel and top material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest , Assembled Ready To Use, Free standing, under structure of the podium will be Gable end and modesty panel, Open Storage with one shelf, Angled reading surface, fixed Top position with paper stop, Podium top & Gable end and modesty panel material will be three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest with 5mm thickness, Length of podium top 600mm, Depth of podium 500mm, Height of podium 1100mm, Laminate in colour with matt finish 0.6-0.8mm thickness of type S,F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side with top finish etc complete.

OD150738/2022-2023:Supplying and providing Wireless Cardioid Handheld Microphone with Wireless, Operating Range 50m, Microphone Transducer Type Condenser, Polar Pattern / Directionality Cardioid, Frequency Response (Hz) 20-20,000 Hz, Signal to Noise Ratio (dB)100, Audio Connector Type 6.35 mm Jack, Operating Temperature Range (Degree C) 0-40, Operating Humidity (RH%)80, Dimension (W x H x L) (mm) W62 × H128 × D26 mm, Net Weight (Gram) 285 gram with One Year Warranty

OD203936/2022-2023:Supplying and fitting 1.50 Ton 5 star rated copper condenser split AC of a reputed manufacturer including cost of AC and all other incidental charges etc complete

21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.4.1:Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

9.62.1:Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:300x16 mm

9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

8.1.1.2:Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm

Contractor Shinil Antony

Bidder Name

Contractor Shinil Antony

RATHEESH S