REPAIR TO STEEL GATE INCL GATE POST BOUNDARY WALL DRAIN PATH CULVERT FENCING ETC AND OTHER MISC WORKS AT ZONE B AREA AT KUMBHIRGRAM UNDER AGE I AF KUMBHIRGRAM

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as diercted

Demolition or brick work of stone/boulder masonry, built in cement morter including all quoins, arches pillars etc but excluding ashlars facings dressed stone work and precasted concrete article complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed in concrete brick work masonary etc.complete all as specified and as directed

Dismantling barbed wire from fencing post, etc. of any type and any description, serviceable materials keep under safe custody and removing un-serviceable from the site, complete all as specified and as directed.

Material and labour for preparation of old steel surface of any description over 10cm in width or girth and not otherwise described and painting with one coat of synthetic enamel paint over existing surface complete all as specified and as directed

Material and labour for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains including necessary formwork complete all as specified and as directed.

Materials and labour for 100mm thick PCC 1:2:4, type B2 as in footpath using 40mm graded stone aggregate, finishing cement concrete surface even and smooth without using extra cement including impresion on green concrete and glass strip or sealing compound , Grade 'A' in expension joint etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks stright or curved on plan exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Labour only for brick work (except brick,old size) with sub class 'B' bricks stright or curved on plan exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. Note: Old serviceable bricks shall be obtained from item No.2 here-in-before.

Material and labour for providing, cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in coping complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or on concrete surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed

Material and labour for 50 mm thick cement concrete type B-2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base floor, finished even and rough complete all as specified and as directed.

Materials and labour for pre polished chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with screed bed or bedding layer of cement mortar 1:6 in 15 mm thick for laying floor finishes complete all as specified and as directed.

Supply and fix punched type concertina coil 610 mm dia laid over 'Y' shaped MS angle post, including necessary GI fixing clips and two runs of SRPBT wire for securing and fixing complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm and over cut to length, bent to shape required incl. cranking bending spirally for hooping for column hooking ends and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia.complete all as specified and as directed

Material and labour for angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Materials and labour for galvanised 2 stranad steel barbed wier 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing s and straing and fixing to any type of standard rail straining Bolt , including, securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pine etc complete all as specified and as directed (Each line of wire to be measured separately)

All as per item No.19 here-in-before, but materials obtained from Item No.4 here-in-before, including restraining and re-securing and making good staples etc.complete all as specified and as directed (Each line of wire to be measured separately)

M/S R A ENTERPRISE

Shri Jyotibrata Chakrobarty

M/S RAJU ENTERPRISES AND BROS