REPAIR AND MAINTENANCE OF UNSERVICEABLE GARDEN LIGHT AND OTHER MISC CONNECTED WORKS AT DRASS.

Amount

Excavation in trenches, not exceeding 1.5mtr wide and not exceeding 1.5 mtr depth, for foundation, etc, or for shafts, wells, cesspits, manhole, pier holes etc not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-charge.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engineer-in-charge.

Removal surplus soil not exceeding 50mtr and depositing where directed at level not exceeding 1.5mtr above the starting point, complete all as specified and directed by Engineer-in-charge.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I,complete all as specified and directed by the Engr-in-Charge.

Un-reinforced precast cement concrete cable cover of PCC 1:1.5:3 type A-1, conforming to class LV, flat of size 250mmx150mmx40mm, laid dry over electric cable for protection,complete all as specified and directed by the Engr-in-Charge.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts, cross-sectional area 25 Sqmm 4 core laid in trenches/ducts, passing through pipes or along poles including taking out old/unserviceable cable,complete all as specified and directed by the Engr-in-Charge.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts, cross-sectional area 16 Sqmm 2 core laid in trenches/ducts, passing through pipes or along poles including taking out old/unserviceable cable,complete all as specified and directed by the Engr-in-Charge.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts, cross-sectional area 10 Sqmm 2 core laid in trenches/ducts, passing through pipes or along poles including taking out old/unserviceable cable,complete all as specified and directed by the Engr-in-Charge.

Sheet metal enclosure for DB’s, single door single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by the Engr-in-Charge.

MCB, single pole, 5 to 32 Amp, 240V, 10 KA, complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole and neutral 32 amps, 240 volts , complete all as specified and directed by Eing-in-Charge.

Supply and fixing dacorative gate light /post top light fitting oriental design landscape lighting suitable for 40 watt LED lamp with opel diffuser complete all as specified and directed, Cat part no LPTO-40-CDL of Crompton or equilent in approved make.

Supply and fixing dacorative gate light /post top light fitting oriental design landscape lighting suitable for 20 watt LED lamp with opel diffuser complete all as specified and directed, Cat part no LPTH-20-CDL of Crompton or equilent in approved make.

Supply and fixing dacorative bollard light/garden light suitable for 10 watt LED lamp with opel diffuse complete all as specified and directed, Cat part no LBLTW-10-CDL of Crompton or equilent in approved make.

M&L for 40 mm bore GI tubes, light grade, laid in trenches/across roads/alongwith walls/poles as protection to cables and including taking down of old unservicable GI tubing, complete all as specified. and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:3:6 type C-1 (using 20mm grade aggregate) as in coping including all necessary form works complete all as specified and directed by Engineer-in-Charge

Supply and fixing 50 mm dia GI tube medium grade galvanised, with all fitting and fixed as pole for fixing of garden light including painting , complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section in service connections 10 sqmm 2 core solid conductor cables, complete all as specified and directed by Eng-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section in service connections 6 sqmm 2 core solid conductor cables, complete all as specified and directed by Eng-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section in service connections 4 sqmm 2 core solid conductor cables, complete all as specified and directed by Eng-in-Charge.

Sub main wiring with two run single core 2.5 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade in stove enameled black rigid steel conduit including tees, bennds, elbow, couplers, junction etc including making good the disturb surface to match the existing, complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 3 of SSR Part-I conected to earth test point as specified or indicated including testing on completion.

Amount of Sch 'A' Part - II (Credit Schedule) Rs. 28670.00 (minus) as listed in Schedule of credit shall be deducted from total BOQ during AOC.

M/S TRADE LINK