CERTAIN REPAIR TO PATH DRAINAGE AND PARKING IN UPPER AREA AT NORTH COMPLEX AT IMA DEHRADUN

Amount

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of brick masonery complete all as specified and directed.

Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 ncluding demolition of brick masonery complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work including demolition of existing old concrete etc complete all as specified and directed.

100 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in hard standing etc with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces to make good including demolition of existing old concrete complete all as specified and directed.

Forming construction joint 30 mm deep x10 mm wide filled with sealing compound Grade 'A ' etc complete all as specified and directed.

Machine pressed coloured rubberised moulded precast concerete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Machine pressed grey cement rubbersied moulded precast concerete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Machine pressed grey cement rubberised moulded pre cast concret interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Rubber moulded Chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the surface of tiles over and including 20mm thick screed bed in CM 1:6 and dismantling of existing tiles of any description or position complete all as directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete including demolition of existing old concrete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling mass concrete and sub base of floor etc including demolition of existing old concrete complete all as specified and directed.

PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints laid in trenches, fixed to walls/floors/laid in trenches fixed in repair complete all as specified and directed.

Precast cement concrete 1:2:4 (using 20 mm graded stone aggregate) block masonary with solid block exc 10 cm in wodth and set in CM 1:4 with and including demolition of existing blocks masonary complete as specified and directed.

Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in beams, cantilever bressummers lintel over 1.5 m etc including demolition of existing RCC of any description and position complete all as specified and directed.

Use and waste of form work to soffits of floor or roof beams beam haunching girders bressummers lintels cantilevrs shelves includig suports and similar works also splays between floor and beam etc for rough finished surfaces of concrete complete all as specified and directed.

MS framed work as in doors or gates of angle or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing including dismantling existing framed work complete all as specified and directed.

Hollow section stainless steel grade 304 framed work as in Hand rails and railing braces, etc, also fastening and fixing including dismantling existing framed work complete all as specified and directed.

Solid stainless steel grade 304 work as decorative chain, Column stringers, balusteres Horizontal rail etc also fastening and fixing including dismantling existing framed work complete all as specified and directed.

Mild Steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wires etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc including dismantling existing posts and struts and making good distrubed ground complete all as directed.andspecified and directed.

Preparation of new or previously untreated concrete/plastered surfaces of any description and applying two coats of cement base paint complete all as specified and directed.

Preparation of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red exide or zinc chrome primer complete all as specified and directed.

Supply and fixing MS galvanised chain link fencing, of size 4mm dia and mesh size 100x100mm to any type of standards, rails, straining bolts etc including provision of binding wire and dismantling/Taking down unserviceable fencing complete all as specified and directed.

Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild Steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or squre head at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or squre nuts exc 22.5 cm but n exc 30 cm long complete all as specified and directed.

Pre-cast RCC 35 mm thick 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in louvers and jallies set in cement motar 1:4 including all mouldings including dismantling existing Jallies complete all as specified and directed.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Bullet Beige of AGL or equivelent of Kajaria/ Somany/ Johnson.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Bullet Rosa of AGL or equivelent of Kajaria/ Somany/Johnson.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Tabula Biege of AGL or equivelent of Kajaria/ Somany/Johnson.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Tabula Rosa of AGL or equivelent of Kajaria/ Somany/Johnson.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Curvy Beige of AGL or equivelent of Kajaria/ Somany/Johnson.

Vitrified exterior colour tile of size 30 cm x 30 cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in CM 1:6 including dismantling existing tile complete all as specified and directed. Make and product feature :- Grandura Curvy Rosa of AGL or equivelent of Kajaria/ Somany/Johnson.

High intensity grade shedding retro reflective delinator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embeded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, including removal of old unserviceable delinator complete all as specified and directed. Make- 3M/Tata BP Salar/SA Trafic Safety Kolkata/Bons Light Pvt. Ltd Ahmedabad

M/S S P BUILDERS

VEE AAR Builders and contractors

M/S RAJESH KUMAR GOYAL

M/S VIJAY TRADERS

M/S Anil kumar

AAR PEE ENTERPRISES

M/s caspur construction company