Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.9 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹3.5 L+₹55,246.70 (18.8%)Rejected-AOC | 2 | Rejected-AOC L2 |
Tender Value
₹3.7 L
EMD Value
₹9,314
Closing Date
9 May 2025, 5:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer PWD Buildings sub division Munnar
GENERAL-Roofing work for THQH quarters at Adimali- Roofing work for THQH quarters at Adimali-General Civil Work-1
2025_PWD_762819_1
PWD/BLDG/TR/3833/2025_5_1_1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Adimali
Please refer Tender documents.
12 documents required · 12 mandatory
₹825
₹9,314
30 Jun 2025
2 May 2025
13 May 2025
2 May 2025
9 May 2025
2 May 2025
Amount
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
OD281227/2024-2025:Providing and fixing Euro guard or equivalent quality hysquare rain water square gutter of size 150 mm in size with leaf guard including all fittings etc. complete.
OD281270/2024-2025:Providing and fixing G.I. welded sq mesh of 50x50 mm (4 mm dia) wire including priming coat and all associates as required complete as per the direction of Engineer - in- Charge( excluding the coast of painting and frame work)
OD284831/2024-2025:Providing and fixing false ceiling with 9 mm T.K.T ceiling material of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
OD284880/2024-2025:Engaging plumbers for plumbing works
OD281229/2024-2025:Engaging carpenter for demolishing
OD281230/2024-2025: Engaging labor for demolishing
OD281231/2024-2025: Engaging carpenter for repairing doors and windows
OD281232/2024-2025: Engaging labour for cleaning surroundings.
SINU K. SIMON (BID ID -2209093)
Bidder Name
Johny K P
SINU K. SIMON
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1242064.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .