Provding Drinking water faiclities to EMRS Munchingputtu at Labuuru in Munchingputtu mandal of ASR District , Est cost of Rs.39.50 Lakhs

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.165 mm dia drilling . Drilling of Bore well with DTH Rig per RM.2) Supply and Delivery of 180mm dia 250mm dia, 140mm dia Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 3) Perforation charges for inner casing of 180mm dia UPVC casing pipe 4) Supply and fixing of end cap for UPVC casing pipe 5) Geologist's survey charges for site selection of source including Contract profit @ 13.615%. but excluidng CED/GST etc complete.

Supply, delivery, installation and commissioning of Submersible Pump sets with 55LPM and head 98.82m(1 HP) 15 stage at Sump and suitable to Borewell And Pump set with 55LPM and head 98.8 m (1HP) at bore wellswith motor Single phase 2880 RPM, 415 volts of reputed make with minimum overall efficiency of 40% at the duty point with radial/mised flow with non-return valve including cost, conveynce of motor, pump set, panel board with necessary equipment along with required length of GI pipe medium class (B class) ISI marked, reputed make with "C" class couplings, bends, flanges etc with required lenght of 3 core PVC sheathed flat cable, required lenth of 7/18 copper wire and instailation and errection of all materials and all labour charges fixing as per the direction of the department officers etc. complete, including all required accessories but excluidng CED/GST etc complete.

Construction of Source tank with earth work Excavation and CC (1:4:8) using 40 mm HBG metal , CC(1:2:4) prop using 20mm gauge HG metal for Bottom slab, Side walls and cover slab , Cement plastering with CM (1:3) 12mm thick , Cost & Supply and fixing of 50mm GI Pipe , cost, supply of steel Fe 500 a including all materials and all labour charges etc. completed but excluding GST and CED

Construction of 20 KL GLSR Earth work in excavation for structures n hillock as per the approved type design and specifications and as per the directions of the departmental officers and as per the specification no 25 in Part-B of Volume-I of technical specification contained in Volume-II filling the foundation with sand including cost , conveyance, watering and ramming etc coimplete CC(1:4:8) using 40 m HBG metal including cost and M 30 concrete using for bottom raft, top slab , accoproof pastering with CM(1:3), 12mm thick including cost and cement palstering with CM(1:3) ,12mm thick, Snowcem painting including, supply and placing of the HYSD bars, fabrication cost supply& fixing of GI ladder (20 KL GLSR as following 50mm dia GI pipe ISI medium 'B'class for vertical connections, s ladder, Gate valve - 1No, 1 No. of Fly Proof Ventilator, DI manhole cover including all labour charges and conveyance etc.) including Over heads and Contractor [email protected]% but excluidng CED/GST etc complete.

Cost supply and fixing of 50 mm dia nominal bore GI pipe medium grade properites and weights as per IS 1239 with GI fittings including cost and conveyance of all materials and all labour charges etc complete For Gravity Main.

Construction of pipeline for water supply with 63mm dia, 6kg/cm2 HDPE PE-100 grade Pipes as per IS: 4984-1995 with its ammendments and revisions thereon including cost and supply of pipes, lowering, laying and jointing of Pipe lines true to alignment and gradient, trench excavation manually for pipe lines in all types of soils and refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work, filling pipeline with water and testing to hydraulic field test pressure including all labour charges laying and jointing as per the directions of the departmental officers and as per the technical specifications of 17 (Part-B of Vol-I) but excluding GST and CED for finished item of pipeline' 75 mm dia HDPE 6 Kg/sqcm ((manually) trench size 0.5x0.75m for Pumping Main

Construction of pipeline for water supply with 63mm dia, 6kg/cm2 HDPE PE-100 grade Pipes as per IS: 4984-1995 with its ammendments and revisions thereon including cost and supply of pipes, lowering, laying and jointing of Pipe lines true to alignment and gradient, trench excavation manually for pipe lines in all types of soils and refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work, filling pipeline with water and testing to hydraulic field test pressure including all labour charges laying and jointing as per the directions of the departmental officers and as per the technical specifications of 17 (Part-B of Vol-I) but excluding GST and CED for finished item of pipeline' 90 mm dia HDPE 6 Kg/sqcm ((manually) trench size 0.5x0.75m for Pumping Main

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportatio, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc., complete for finished item of work. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage charges as specified in Technical specifications including contractor profit @13.615%,