PROVISION OF PREFAB SHELTERS (STAFF QUARTERS) FOR STAFF OF GE (P)(AF) DEESA

Amount

B/R PORTION

Surface excn n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed by Engr-in-Charge.

Returning , filling in, incl spreading, leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and as directed by Engr-in-Charge.

M&L for Hard core with broken stone of gauge n.exc. 63mm deposited spread and levelled in layers n.exc.15cm thick watered and rammed to a tree surface etc complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation ,filling and mass complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate), 100 mm thick as in sub base complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete (1:3:6) type C1 (using 20mm graded aggregate), 75mm thick as in plinth protection, floors and pavings etc complete all as specified and as directed by Engr-in-Charge.

M/L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as dircted by Engr -in-Charge.

M&L for rendering 10mm thick, in CM (1:6) on concrete or brick wall surfaces , finished even & smooth with out using extra cement complete all as specified and as directed by Engr-in-Charge

M&L for 15 mm thick rendering in two layers with 10 mm thick in CM (1:6) & 5 mm thick in CM (1:4) using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge

Supply, laid, fix and testing of galvanised steel water tubing, medium grade galvanized with and including all fittings and fixtures such as tees, elbows, diminishing pieces etc. complete fixed to wall and ceiling or laid in floors of following sizes of pipes :-

(a) 15 mm bore of tube

(b) 20mm bore of tube

(c) 25mm bore of tube

Supply & fix, Stop valve, 15 mm bore of pipe, minimum finished mass 0.575 kg each, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for (externally threaded), for iron pipe or for union complete all as specified and as directed by Engr-in-Charge.

Supply and fix Bib taps, 15mm bore of pipe, minimum finished mass 0.575 kg each, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed by Engr-in-Charge.

S&F bib tap, 15mm bore of pipe, cast copper alloy, CP, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix pillar tap, 15mm bore of pipe, cast copper alloy with capstan heads, chromium plates, fancy type, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix, 20 mm bore, Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed, complete all as specifed and directed by Engr-in-Charge.

Supply and fix, 25 mm bore, Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specifed and as directed by Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed by Engr-in-Charge

M & L for Machine pressed, precast concrete, interlocking paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment etc complete all as specified and as directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds mitred/ stoped end etc all as specified and as directed by Engr-in-Charge (Inner girth only measured)

Cutting into existing manholes (Int dia of pipe 150mm) for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm internal dia of pipe complete all as specified and as directed by Engr-in-Charge

M&L for Cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) in coping including formwork etc complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) in surface channel & drains etc complete all as specified and as directed by Engr-in-Charge.

M&L for providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) as in manhole covers, drain covers, etc complete as specified and as directed by Engr-in-Charge

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and as directed by Engr-in-Charge.

M&L for concrete bed to drain pipes of 150 mm bore including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2 etc complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint, over a coat of red oxide zinc chrome primer on new steel surfaces including preparation of new painted steel surfaces etc complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening etc complete all as specified and as directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and as directed by Engr-in-Charge..

M&L for 500 litres capacity rotational moulded polyethylene water storage tank (Cylendrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in Charge.

S&F Ball brass valve, high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule and fixed for 20mm bore of pipe complete all as specified and as directed by Engr-in Charge.

S&F, 10ltr capacity, PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed by Engr-in Charge.

S&F flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engr-in-Charge.

S&F stop cock, 15mm bore pipe, with adjustable wall flange, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for etc complete all as specified and as dircted by Engr -in-Charge.

S&F Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stoper but inducting brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-in-Charge.

S&F Waste coupling of PTMT (half or full threaded) for 32mm bore dia of discharge pipe suitable for urinals, (Minimum weight 45gms) complete all as specified and as directed by Engr-in-Charge

Supply & fixing cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 for 75mm diameter of outlet etc complete all as specified and as directed by Engr-in charge.

S&F grating square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and as directed by Engr-in-Charge.

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall etc complete all as specified and as directed by Engr-in-Charge for the following sizes of pipes :-

(a) 110mm bore of pipe

(b) 75mm bore of pipe

S&F PVC (SWR) bends any radius, bore of pipe 110mm complete all as specified and as directed by Engr-in- Charge.

All as per Item No. 43 above, but for 75mm bore of pipe complete all as specified and as directed by Engr-in- Charge.

S&F PVC (SWR) junction single, (Single T ) equal or un equal , bore of pipe 110mm complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 45 above, but for 75mm bore of pipe complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long, Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F 100mm, Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm, anodised aluminium handle, cast type complete all as specified and as directed by Engr-in-Charge

M&L for screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and as directed by Engr-in-Charge.

M&L for coloured Vitrified Ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed by Engr-in-Charge

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as dircted by Engr -in-Charge

M&L for Anodised aluminium frame (Powder Coated, Min thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including fittings, joining cleat and rubber suitable beading for fixing etc. complete all as specified and as directed by Engr-in-Charge

M&L for 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, nosing etc complete all as specified and as dircted by Engr -in-Charge

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and as dircted by Engr -in-Charge

S&F 4.8 mm thick, sheet glass, frosted on one side, fixed with and including necessary rubber gasket and aluminium beading etc complete all as specified and as directed by Engr-in-Charge.

S&F 5.5mm thick, Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-Charge

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, choukhat for door and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as dircted by Engr -in-Charge

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed by Engr-in-Charge

S&F 200mm long, Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc complete all as specified and as directed by Engr-in-Charge

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-Charge.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including valleys and gutters etc complete as specified and as directed by Engr-in-Charge.

S& F for aluminium anodised snap grid frame work for false ceiling for size of grid 605X605 mm including necessary notching and prepare holes, supporting hanger comprising of MS rod, J bolts with frame work to ceiling and to the snap grid including 12 mm thick half perforated low density particle board / tiles 60cm X60cm in size fixed with staples etc complete all as specified and as directed by Engineer-in-Charge.

M&L for MS Plates, Fe 410 -W (Gde?E- 250) quality?A? (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and as directed by Engineer-in-Charge.

S&F Steel work in tubular trusses, Column, Purlin, rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 25mm thick, Bonded mineral wool blanket slab made from glass density 24 kg/cum and fixed as per manufacturer’s instructions etc complete all as specified and as directed by Engineer-in-Charge.

S&F 50mm thick concrete board as in outerwall, partition wall fixed to floor and wall using GI, C- Channel 0.50mm thick, section cap with screws and washers and complete filling of joints using birla white putty etc complete all as specified and as directed by Engr-in-Charge Note : GI C-channel cap rates are inclusive in the item, no extra payment shall be made on this account.

M&L for preparation of new surfaces of walls and applying two coats of Cement based paint, over and including a coat of primar etc complete all as specified and as directed by Engr-in-Charge.

S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed by Engr-in-Charge

S&F 150mm size, Aluminium handles, cast type, anodised complete all as specified and as directed by Engr-in-Charge

S&F 150mm size, Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engr-in-Charge

S&F 250mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over and including a coat of primer etc complete all as specified and as directed by Engr-in-Charge.

S&F Chain link, MS galvanisd fencing including line wires, any mesh, size and type and to any type of standards, rails, straining bolts including provission of binding wire etc complete all as specified and as directed by Engr-in-Charge Note : Weight of chain link shall not be less than 2.5 Kg/Sqm

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally tor hooping far columns. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed by Engr-in-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil etc complete all as specified and as directed by Engr- in- Charge.

M&L for Cement concrete , (1:3:6) type C-2 (using 40mm stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed by Engr-in-Charge

M&L for mild Steel works for Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessory drilling, bolting or riveting etc., and confirming to Fe-290 Gde E-165 complete all as specified and as directed by Engr- in- Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, diameter of neck 5 to10 mm etc. complete all as specified and as directed by Engr- in - Charge.

E/M PORTION

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through in and including PVC casing & caping not less than 25 mm size including all accessories on wall including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty conductor including fabricated branded modular PVC box duly make embossed, and with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified and as directed by Engr-in-Charge for the following:-

(a) One light /Ceiling fan/exhaust fan point controlled by one, one way switch .

(b) One bell point controlled by one bell push.

(c) One 3 pin socket outlet , 5 Amp point controlled by one, one way switch on independent board.

(d) One 3 pin socket outlet, 5 Amp point controlled by one, one way switch on same board.

All as per item No. 1 above, but for One 3 pin socket outlet, 15 Amps, independent using 4 Sqmm PVC single core copper conductor cable multistranded as earth wire etc complete all as specified and as directed by Engr-in-Charge.

M&L for Modular switch, 1 way, 6 Amps, 1 module, 230V, AC complete all as specified and as directed by Engineer in charge.

M&L for Modular socket outlet, 5 pin, 6 Amp socket, 2 module, complete all as specified and as directed by Engineer-in-charge.

M&L for Modular bell push, 6 Amps, 1 module, 230V AC complete all as specified and as directed by Engineer-in-charge.

M&L for Modular switch 1 way, 16 Amps 1 module 230V AC complete all as specified and as directed by Engineer-in-charge.

M&L for Modular socket outlet, 5 pin 6/16 Amp, universal socket, 2 module, complete all as specified and as directed by Engineer-in-charge.

Supply & fix Modular, five step type, electronic fan regulator, 2 module, 360 degree rotatable type, 230V, AC complete all as specified and as directed by Engineer-in- charge.

S & F sheet metal enclosure, single pole and neutral with two pin earth plug top and socket complete with one single pole MCB 20 Amp, "C" Curve, 230 volts, 50 Hz, 10KA breaking capacity etc complete all as specified and directed by Engr-in-Charge.

Supply and fix LED batten luminaire surface mounted, 4 feet, system wattage of 20-22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 105 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm, 3 core, copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed by Engr-in-charge. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F LED batten luminaire, surface mounted, 2 feet, system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm, 3 core, copper conductor flexible wire fixed complete all as specified and directed. by Engr-in-Charge.

S&F decorative type, wall mounted luminaire with unbreakable, poly carbonate, materials, 1x14 watt LED bulb, B22 Base, complete all as specified and as directed by Engr-in-Charge.

S&F LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed complete all as specified and directed by Engr-in-charge. Note :- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures

S & F, electric water heater, storage type (Geyser) steel body with copper inner tank, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control of capacity 25 ltr having heating element 1.5 KW, DEE 5 star rated complete with all accessories such as safety valve, thormostate, NRV, connection pieces etc all as specifical and as directed by Engr-in-Charge.

Supply and fixing ceiling fan, three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220cum/min, AC, single phase, 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhoust Fan, made of strudy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM. 1200, copper winding of sweep 250mm including provision of copper cable 3 core, 0.5 sqmm for connection etc complete all as specified and as directedby Engr-in-Charge.

S&F, MCB, DB, SPN 8 way Horizontal, IP - 43 Protection, double door 240 V, AC, 50Hz for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, neutral link, earth link etc complete all the specified and as directed by Engr-in-Charge

S&F MCB, SPN, 40 to 63 Amps, 240 volts, 10 KA, 50 HZ, 'C' curve complete all as specified and as directed by Engr-in-Charge

S&F MCB, SP, 6 to 32 Amps, 240 volts, 10 KA, 50 HZ, 'C' curve complete all as specified and as directed by Engr-in-Charge.

M&L for Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 32 mm size PVC casing & caping with accessories all as specified and as directed by Engr-in-Charge. Note:- Two runs of cable, one run of earth continuity conductor and one run of PVC casing & caping shall be measured & paid as one unit length.

Supply and laying, jointing & testing XLPE, insulated, PVC sheathed, armoured heavy duty electric cable, with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2 core complete fixed to floor/walls/ceiling with suitable size of clamp/saddles complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with GI electrode 600x 600 x 6mm thick, buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level, connected to GI strip 25 x 4 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 Nos, 8mm dia, 25 mm long, hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm dia GI tubing light grade and necessary fitting for protection of GI strip incl laying of alternate layer of charcoal dust and common salt, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover, 40 mm thick RCC (1:2:4) type B10 (using 12.5 mm graded stone aggregate) reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia, plastering 15mm thick in CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with ground wire mesh, 20mm dia GI pipe, Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed by Engr-in-Charge. Note:- Galvanised strip and light grade GI pipe for protection upto 7.5 m shall deemed to be included in the quoted rates.

Gayatri Associates

Chanda Construction Co.

SHISHODIA ENTERPRISES

Badri Electricals

THE SHIVAM ENTERPRISES