Manufacturing ,Supplying and Fixing Kinfe Edge Gate Valve, Screens and Other Civil Works In ghuma lake at Thaltej ward And Other Different Ward in North west

Name of work: Manufacturing ,Supplying and Fixing Kinfe Edge Gate Valve, Screens and Other Civil Works In

Ghuma lake at Thaltej ward And Other Different Ward in North west zone .

Qty. Items Rate Rs.Ps. per

1 Job Work of providing, fabricating, and fixing SS Flange tail

pieces set of for following dia RCC pipe for fixing of knief Edge

Gate Valve with using Grouting matrials . Rate to include

arranging, transporting, fabricating in SS Sheet flats and Flange

with grouting in RCC pipe anchoring them in RCC pipe by

anchor bolts and filling the pipe by rich cement mortar mixed

with chemicals, etc. complete.

(v) 1.0 for 1200 mm dia 154662.00 Nos.

2 Job Work of providing, fabricating, and fixing SS Flange Body

type knief Edge Gate Valve of following dia (Inside) . Rate to

include arranging, transporting, fabricating, laser cutting,

plasma cutting, Molding, machining, Drilling in SS Sheet, flats

,SS Ring ,Flange with rubber lining and Nut bolts etc.

(v) 1.0 for 1200 mm dia 302328.00 Nos.

3 Job Work of providing, fabricating, and fixing SS supports,

floor and railings on top of the gate frame to enable the

fixing of gearbox, SS frame top ends to be bound with the floor

structure of the gear box. Rate to include providing the SS

sheets, flats to fabricate the top head stock supporting structure,

spindle cover pipe and fixing the top plates by bolts in such a

manner that it can be opened easily for future maintenance at

site, etc. complete.

(v) 2.0 for 1200 mm dia 43018.00 Nos.

4 Job Work of providing, turning, fabricating and fixing SS

spindle connecting the gear box and barrier and head stock of

gearbox on top of the gate. Rate to include providing the SS

spindle rod, turning it for the recommended pitch length of

teeth, casting the gears from SG grade steel, turning the warm

gears ,cutting teeth in to round gear, turning the hole on round

gear exactly to match the outer teeth of the spindle, fixing all

assembly to form the gear box with housings and bearings,

thrust bearing on top and bottom of round gear fixed between

SS plates, covering the gear box sides also in by SS plates

.fabrication of head stock by plates and pipe to form the

standing structure of rotation height required, fixing all on

platform, etc. complete.

(v) 2.0 for 1200 mm dia 70642.00 Nos.

5 Constructing Valve Chamber onfollowing dia SWD linw

(inside clear)including excavation, refilling, plain cement

concrete (1:4:8) for foundation, Pre cast /situ to cast RCC M-30

, 20 mm thick inside cement plaster, PVC foot steps, brick

masonary in C.M. (1:5), including cost of manhole cover and

RCC slab in RCC M-20 etc complete.depth up to 5.00 mt.

(ii) 1.0 for 1400 mm dia ,1200 mm dia, 900 mm dia 105653.00 Nos.

(iii) 0.0 for 600 mm dia ,450 mm dia,300 mm dia 76032.00 Nos.

providing and fixing pakka dummy in following dia RCC pipe

line with using MS plate ,MS garder ,sand bags, Diversion pipe,

6 plug ,Brick work, as per required and removing same after

completion work etc comp.Do As Directed.

(ii) 1.0 for 1400 mm dia ,1200 mm dia, 900 mm dia 52800.00 Nos.

Providing and casting in situ Controlled Cement Concrete (with

ordinary portland cement) M-25 for Well curbs including

7 necessary shuttering, laying, vibrating and curing complete.

(i) 1.00 Flat Top/Bottam Slab with shuttering 8077.00 m3

(ii) 3.00 vertical wall above 25 cm 7936.00 m3

Providing Labour for Mice. Work for Breakdown work releted

job including required tools etc.comp.

(i) 27.00 Unskilled Labour for 8 Hrs Shift 640.00 Shift

(ii) 5.00 Skilled Labour for 8 Hrs Shift 656.00 Shift

Conveyance charge of earth, lime, murrum, building ,rubbish,

9 36.00 manual garbage, sludge, excavated rock, fly ash,aggregate of 124.00 m3

any kind etc. complete. Upto 5.0 Km lead.

ReFilling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20 cm in

depth consolidation each deposited layer by ramming and

Barricating the entire break down or excavated area on rental

basis using wooden ballies/MS angles at max 2.00 mt center to

11 16.00 center ,G I sheet, reflective paint board out side to avoid 1056.00 Rmt

accident and for smooth traffic diversion and The same shall be

removed after complention of work.

Hiring Charge for JCB machine bring for excavation of the

break down pit and loading the excavated soil for shifting

another place or misce.work etc.complete. as directed.rate for

Hrs working in Day.

Hiring charges of heavy 12 Tonne capacity Hydro machine for

13 3.00 lifting the Any Matrials when required any time. rate for 8 Hrs 3334.49 Day

working in Day.

Hiring and operating the Tractor for Earth work and other

14 7.00 requirements with Arranging fule Set Do As Directed. 8 Hrs 2104.09 Day

working in Day.

Hiring and operating following capacity Mud Pumps incl. Cost

of fuel and operator including the cost of to and fro

15 transportation, laying of the delivery hoses as required,

lowering and lifting the pumps as and when required etc.

complete. Set Do As Directed.for 8 Hrs Shift

Hiring and operating the Following capacity 3 Phase Electric

Generator for operating machinery, and lighting and other

requirements with Arranging diesel to run the D.G. Set Do As

Directed. 8 Hrs Shift.

(i) 8.00 10 KVA 2464.00 Shift

Hiring and operating the electric Breaker Machine for

17 12.00 Dismantaling work for removing damage manhole and other 880.00 Shift

requirements with Arranging cable Set Do As Directed.

18 5.00 Providing lighting arrangement for doing work at night time. 132.00 Nos