BUILDING WORK

No. figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 79.50 Cum 203.83

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead. (A) Loose or soft soil.

2 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 23.25 Cum 2728.01

8 B.T. machine crushed stone aggregates 40 mm nominal size) and

curing etc. complete excluding cost of form work in foundation and

3 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 15.45 Cum 4349.47

B.T. stone aggregate and curing of concrete complete, including the

cost of form work but excluding the cost of reinforcement for R.C.C.

work in (A) Foundations, footings, base of columns and mass concrete.

4 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 1.95 Cum 7584.69

B.T. stone aggregate and curing of concrete complete, including the

cost of form work but excluding the cost of reinforcement for R.C.C.

work in Columns up to Plinth level.

5 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 15.45 Cum 4259.26

B.T. stone aggregate & curing complete including the cost of form work

but excluding the cost of reinforcement for R.C.C. work in Ground

6 Filling available excavated earth (excluding rock) in trenches. plinth, 36.90 Cum 130.39

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming and watering.

7 Providing and laying brick work using common burnt clay building 26.70 Cum 4051.78

conventional type bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5 (1- Cement :

5 fine sand) including the cost of all materials and labour charges etc.

20cm. thickness including watering, ramming and consolidating etc.

completed.

9 Filling in plinth with sand under floors including watering, ramming, 32.40 Cum 460.19

consolidating and dressing etc. complete.

10 Carrying out plinth treatment to post construction / existing structure by 120.00 Sq.m. 34.36

spraying chemical solution for termite control treatment including labour

and material consistent with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

percent is recommended i.e. one litre 20 EC chemical emulsion with

liter give 1 % concentration inclusive of one litre chemical emulsion

application at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

11 Providing and laying cement concrete 1:2:4 (1- Cement : 2 Coarse sand 15.15 Cum 3481.28

: 4 graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in foundation and plinth.

12 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 5.40 Cum 7584.69

B.T. stone aggregate and curing of concrete complete, including the

cost of form work but excluding the cost of reinforcement for R.C.C.

work in Columns for all floor level.

13 Providing and laying brick work using common burnt clay building 54.90 Cum 4320.08

conventional type bricks having crushing strength not less than

kg./Sq.cm. in Super structure in Cement Mortar 1:5 (1 Cement : 5 fine

sand) including the cost of all materials and labour charges etc.

14 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand 12.75 Cum 3053.25

: 6 B.T. machine crushed stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and Plinth

15 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 5.85 Cum 6778.18

B.T. stone aggregate and curing of concrete complete including the cost

of form work but excluding the cost of reinforcement for R.C.C. work in

Lintels for all floor level.

16 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 15.45 Cum 5959.59

B.T. stone aggregate and curing of concrete complete including the cost

of form work but excluding the cost of reinforcement for R.C.C. work in

Beams for all floor level.

17 Providing and laying ordinary cement concrete 1:1½:3 (M-200) using 19.50 Cum 6242.16

B.T. stone aggregate and curing of concrete complete including the cost

of form work but excluding the cost of reinforcement for R.C.C. work in

Slab for all floor level.

18 Providing I.S.I. mark T.M.T. Bar Fe-500D reinforcement for R.C.C. work 7674.00 Kg. 76.21

including bending, binding and placing in position complete upto floor

two level.

19 Providing and fixing both sides polished machine cut kota stone shelves 37.50 Sq.m. 616.12

/ partition of single piece (maximum 150 cm) 25 mm thick embedded

into wall with groove in cement mortar 1:2 (1 cement : 2 fine sand),

including racking and finishing smooth the surface, including joined with

grey cement, rubbing, cutting the stone as and where required etc.

completed.

20 Providing 15mm thick cement plaster in single coat on rough (similar) 417.00 Sq.m. 235.92

side of single or half brick walls for interior plastering upto floor two level

and finished even and smooth in cement mortar 1:3 (1 cement : 3 sand)

including finishing with a floating coat of neat cement slurry for Ground

21 Providing 10 mm thick cement plaster in single coat on brick / concrete 129.00 Sq.m. 213.18

on ceilings and soffits of stairs for interior plastering upto floor two level

and finished even and smooth in cement mortar 1:3 (1 cement : 3 sand)

including finishing with a floating coat of neat cement slurry for Ground

22 Providing 20mm thick cement plaster in single coat on single or half 507.00 Sq.m. 261.37

brick walls for interior plastering upto floor two level and finished even

and smooth in cement mortar 1:4 (1-cement : 4 sand) including finishing

with a floating coat of neat cement slurry for Ground floor.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

23 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20 195.90 Sq.m. 1415.77

mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finished with flush pointing & cleaning the surface etc.

complete for light shade.

24 Providing and laying Ceramic tiles 6mm thick in skirting, risers of steps 81.00 Sq.m. 995.81

and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

25 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps 5.40 Sq.m. 957.63

and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :

3 coarse sand) finishing with flush pointing in white cement.

26 Providing and fixing 18 mm thick mirror polished Granite stone of 45.60 Sq.m. 2185.30

machine cut & full round edge and polished of approved quality in

cladding on sill and around the Doors / windows / ventilation with 20 mm

thick cement plaster 1:3 and jointed with white / matching pigment

cement slurry & adhesive, including polishing & moulding of exposed

edges etc. complete for all floor level as directed by Engineer-in-charge.

27 Constructing a Sandwich type cooking platform of 60 cm width and 70 11.40 Sq.m. 5439.33

cm height resting with granite polished stone top and 100 mm height

faces in exposed faces with 18 mm thick of polished granite stone of

approved colour and quality on 25 mm x 2 No. polished Kota stone

sandwich supports, polished kota stone shelves and fixing stone using

cement mortar 1:2 (1 cement : 2 fine sand) for sandwich and fitting at

bottom & edges with water proof rigid adhesives, including mocking

necessary grooves in walls, polishing and making edges etc. complete

as directed by Engineer-in-charge. (Only top clear area of platform shall

be measured and paid for)

28 Providing and fixing Stainless steel kitchen sink Glossy ASIS 304 grade 3.00 No. 1173.78

and 1 mm thick with over all size 510 x 432 x 33 and bowl size 455 x

368 x 190 mm of approved brand as directed by Engineer-in-charge

with all fittings like C.I. or M.S. brackets painted white / or fixing on

stone base, including cutting holes and making good the same, 32 mm

dia brass waste and M.I. fisher union fitting, including all necessary

fittings etc. complete.

29 Providing and fixing standard extruded of alluminium section of size 1.20 Sq.m. 1175.56

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/Rmt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc. complete for Ventilation

30 Providing and fixing extruded colour anodized aluminium three track 23.85 Sq.m. 3171.70

sliding window having aluminium section having outer frame for bottom

member of size 92mm x 31.75 mm x 1.30 mm size weight of

Kg/Rmt and outer frame for top and sides members size 92.00 x

x 1.50 mm size weight of 1.06 Kg / Rmt, for shutters using top and

bottom size 40 x 18 x 1.29 mm size weight 0.456 Kg / Rmt & interlock

member size 40 x 18 x 1.29 mm size weight 0.456 Kg / Rmt & handle

member size 40 x 18 x 1.29 mm size weight 0.456 Kg / Rmt with 5 mm

thick transparent bronze colour tinted float glass for shutter and fixing

wire net shutter of Stainless Steel wire of 304-grade of IS gauge

designation 85-G with wire of 0-56 mm diameter as a third sliding

shutter with necessary fixtures and fastening like rubber gasket and

transparent silicon sealant glass fixing to frame etc. complete as per

drawing and instruction of Engineer-in-charge.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

31 Providing and fixing 35 mm thick shutter for door having factory made 18.30 Sq.m. 4116.87

solid core, melamine faced, three layered resin flushed door of

approved brand and manufacture, with 1 mm thick decorative laminated

sheet on both side with 6 mm thick and 35 mm x 35 mm specially

shaped moulded teak wood beading fixed around the door with

necessary fixtures and fastenings like S.S. butt hinges, S.S. aldrop, S.S.

handle size 15 cm long, stopper, door closers arrow type etc. complete

as per detail colour & pattern approved by Engineer-in-charge.

32 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter of required 1888.80 Kg. 102.95

pattern to wooden frames of window / Door etc. with M.S. flats at

required spacing and frame all-round square or round bars with round

handed bolts and nuts or by screws, including primer coat of approved

quality and two coats of oil painting etc. complete.

33 Applying two coats of putty & two coats of primer of approved brand and 417.00 Sq.m. 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of approved brand 417.00 Sq.m. 78.90

and manufacture on undecorated wall surface to give an even shade

including thoroughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

35 Wall painting (two coats) with plastic emulsion paint of approved brand 129.00 Sq.m. 84.16

and manufacture on ceiling and sloping roofs to give an even shade

including thoroughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

36 Finishing wall with weather proof exterior emulsion paint on wall surface 507.00 Sq.m. 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials etc. complete

37 Providing and laying water proofing treatment on terrace with broken 138.30 Sq.m. 982.24

china mosaic tiles flooring over average 40 mm C.C. 1:2:4 bedding for

maintaining slope for plain and curve surface & 12 mm to 20 mm of

broken piece of ceramic / glazed tiles (one for more colour as directed)

to be laid over cement mortar bedding of C.M. 1:3 (1 cement : 3 sand)

contain one Kg of water proofing materials per bag of OPC at plain or /

and slops and to be tempered to bring mortar ceramic up to surface

with using white cement and colour pigment, including rounding of

junctions and extending them up to 15 cm along the wall and curing with

bends any patterns or design as per drawing and cleaning by using

oxalic acid etc. complete.

38 Providing and fixing water closet squatting pan (Indian type W.C. pan) 3.00 No. 1430.87

size 580 mm (including 'P' or 'S' trap, foot rests and excluding

earthwork, bed concrete) including providing and fixing 100 mm size “P”

or “S” trap for water closet squatting pan including jointing the trap with

the pan and soil in cement mortar 1:1 (1 cement : 1 coarse sand)

including providing and fixing in cement mortar 1:3 (1 cement : 3 coarse

sand) a pair of white vitreous china 250 mm x 130 mm x 30 mm foot

rest for long pattern squatting pan water closet including providing and

fixing G.I. inlet connection for flush pipe with W.C. pan (A) Vitreous

china (i) long pattern in white colour.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

39 Providing and fixing Wash basin with single hole for pillar tape with C.I. 3.00 No. 2043.58

or M.S. brackets painted white including cutting holes and making good

the same but excluding fittings. (A) vitreous china (ii) Flat back wash

basin 550 mm x 400 mm size (i) in white colour including fixing 32 mm

dia C.P. brass waste pipe, 32 mm dia M.I. fisher union, 15 mm dia stop

tap and 15 mm dia capstan head pillar tap, screw down high pressure

with screws, shanks and back nuts & inlet & outlet connections for wash

basin etc. complete.

40 Providing erecting and fixing double coated ISI water tank of required 3000.00 Liter 3.95

capacity each with all necessary fittings and connection etc. complete

on terrace.

41 Providing and fixing screw down bib taps of following size. (B) Brass 9.00 No. 186.83

chromium plated screws down bib tap. (i) 15mm dia. as directed by

42 Engineer

Providing in charge.

and fixing concealed Cock of premium make with necessary 3.00 No. 808.00

other materials and piping connections etc. complete as directed by

Engineer-in-charge.

43 Providing and fixing Angle Cock of premium make with necessary other 6.00 No. 606.00

materials and piping connections etc. complete as directed by Engineer-

in-charge.

44 Providing and fixing C.P. brass towel rail complete with C.P. brass 3.00 No. 603.19

brackets fixed to wooden plugs with C.P. brass screws.(B) 600mm x

20mm size.

45 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 3.00 No. 558.36

diameter with jali of the following nominal diameter of self cleansing

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

46 Providing and fixing 600mm x 450mm bevelled edge mirror of superior 3.00 No. 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden plug with C.P. brass screws and washers.

47 Constructing brick masonry chamber for underground C.I. Inspection 3.00 No. 3660.76

chamber and bends with bricks having crushing strength not less than

35 Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C.

top slab with 1:2:4 mix (1-cement : 2 coarse sand : 4 graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

48 Providing and fixing S.W. gully trap with C.I. grating brick masonry 6.00 No. 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight. (i) Square mouth traps. (B) 150mm x

100mm size P or R type.

49 Providing and fixing PVC Spigot and Socket soil waste and ventilating 45.00 Rmt. 277.43

pipe of the following nominal size 75 mm dia.

50 Providing and fixing PVC Spigot and Socket soil waste and ventilating 30.00 Rmt. 336.24

pipe of the following nominal size 110 mm dia.

51 Providing and fixing M.S. fan clamps type 1 of 16 mm. dia M.S. bar bent 12.00 No. 128.70

to shape with hooked ends to R.C.C. slabs during laying including

painting the exposed portion of the loops all as per standard design

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

52 Providing laying and jointing in true line and level I.S.I. mark 15mm dia. 90.00 No. 72.65

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

53 Providing laying and jointing in true line and level I.S.I. mark 25mm dia. 60.00 No. 91.84

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

54 Providing Sock well of inside dimension 3.00 mt. deep & 2.00 mt. dia. 3.00 No. 42034.38

including excavation, honey comb masonary work in C.M. 1:6 including

covering the top with slab and providing manhole cover including

providing vatas and curing etc. complete.

55 Constructing septic tank including excavation, B.B.C.C. 1:5:10, with 3.00 No. 23322.28

brick masonary wall in C.M. 1:6 finished with cement plaster in C.M. 1:3

including partition with half brick masonary etc. complete.

56 Bala concept drawings on walls as per the instruction of Engineer in 3.00 Job 15150.00

57 Providing and fixing precast Rubber Dye / steel Dye inter locking 44.10 Sq.m. 685.42

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

confirming to IS 15658 : 2006 including 35 mm sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines of

IRC : SP 63-2018 etc. complete.

58 Supplying and fixing slide, seesaw and swing combo set as per the 3.00 Job 37875.00

instruction of Engineer in charge.

59 Providing and fixing SS 304 Foldable Checking bed having size 1.50 x 3.00 No. 6060.00

0.60 x 0.75 mm including using of 25mm dia pipe, SS 2mm thick,

matter of 25.4 (1") of 40 density, cover with regine cloth of approved

quality etc. completed as directed by Engineer incharge.

60 Providing and placing I.T. wood writing table having size 1.50 x 0.75 x 3.00 No. 15150.00

0.75 mt with one side drawer with using of 19mm thick WP wood, top

cover with 1 mm thick wood type formica including using of all

necessary material & labour etc. completed as directed by Engineer in

61 Providing and fixing Fabric cloth Curtain having length 1.8 mtr for 30.00 Mtr. 858.50

covering of checking area including using of alluminum sliding channel

etc. complete as directed by Engineer incharge.

62 Providing and fixing of SS 304 Hanger for bag including using all 60.00 No. 252.50

necessary materials like SS rail, screw etc. completed as directed by

Engineer incharge.

63 Providing and fixing pin cushion display board having size 1.20 x 0.75 3.00 No. 606.00

mt including using of alluminum section frame, 18mm thick WB

plywood, navy blue cushion cloth pin etc. completed as directed by

Engineer incharge.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

64 Providing and fixing PVC modular kitchen cabinet consisting of base 7.50 Sq.m. 7575.00

and wall units, made from high quality rigid PVC boards (minimum

15–18 mm thick) including shutters, shelves, drawers, SS hinges,

telescopic channels, handles, magnetic locks, necessary fittings,

cutting, fixing, complete as per design and direction of Engineer-in-

65 Providing and fixing foldable MS ladder having 0.90 mt. wide & 3.60mt 150.00 Kg. 110.77

long including rod hinge arrangement at middle with ladder including

one coat of red oxide & two coats of oil paint etc. completed as directed

by Engineer incharge.

66 Providing and fixing of hook of 10mm or 12mm dia. including drilling 3.00 No. 303.00

hole, fixing of male- female thread fastener sealing the same with epoxy

compound, finishing the same etc. complete as directed by Engineer

67 Providing and fixing medical device & equipment standio meter height 3.00 No. 1414.00

measuring scale 2.10mt long including fixing in wall with using of all

heavy SS screw, rail etc. complete as directed by Engineer incharge.

68 Providing and supplying standard PVC (Polyvinyl chloride) Chair with 6.00 No. 1010.00

handle of approved design and make as directed by Engineer incharge.

69 Providing and supplying standard PVC (Polyvinyl chloride) Stool having 6.00 No. 606.00

size 3.75 x 0.60 x 0.45mtr of approved make as directed by Engineer

70 Providing & fixing ABC type fire extinguisher 4 kg. ISI marked complete. 3.00 No. 1515.00

71 Providing and fixing 55 inch LED television with Google Operating 3.00 No. 30300.00

system, 20W to 24W Audio output, 60 Hz refresh rate etc. completed as

directed by Engineer incharge.

72 Providing and fixing RO WATER machine, with storage capacity of 20 3.00 No. 15150.00

litres with standard manufacturer etc. completed as directed by

Engineer incharge.

Electrical Items

73 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 Sq.mm & 24.00 Point. 539.34

earth wire of 1.5 Sq.mm (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multistrand copper wires, in following type of pipe

to be erected concealed in / flushed on wall / ceiling, complete with 6A

Tissino Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary Lamp holder / ceiling

rose / H.D. Connector as directed. (a) with medium class Rigld PVC

pipe and accessories erected flushed on wall/ceiling complete.

74 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 9.00 Point. 765.58

(Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic / Wooden

box, single mounting base frame covered with textured /metallic/white

front plate modules erected on/in wail/ceiling as per pipe erected with

necessary ceiling rose /H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

75 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 9.00 Point. 570.65

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic /

Wooden box covered with appropriate front plate modules erected on/in

wall/ceiling as per pipe erected with following type of accessories. (a)

with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete.

76 Point wiring for on board Looped Plug with 6А Modular type switch & 5 6.00 Point. 309.06

pin socket erected on PVC / Metallic / Wooden box, single mounting

base frame covered with textured / metalic / white front plate modules

erected on /in wall / celling with following type accessories.

77 Providing and erecting Mains with 1:1 KV grade FRLS PVC insulated ISI 150.00 Mitr. 104.03

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in flushed on wall/ceiling, with 1.5 sq.mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid PVC pipe and

accessories (b) 2 Wire 2.5 Sq. mm

78 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 120.00 No's 184.83

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq.mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

following size. (A) with medium class Rigid PVC pipe and accessories.

(b) 2 wire 6 sq.mm

79 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 3.00 No's 368.65

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

80 For using salt and charcoal / coke as required for pipe type earthing. 3.00 No's 171.70

81 Providing & erecting 240 V MCB double pole switch for motor & 3.00 No's 362.59

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (B) 40 Amp. Cat.III

82 Providing and erecting Sheet Steel powder coated MCB distribution 3.00 No's 702.96

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs. (The DBs should be used of same

company of MCB to be used) (A, a, ii) Single phase 8 way single door

83 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 15.00 No's 535.30

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt, LED LED driver efficiency >

85% (fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings. The

shown) (A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV,

IP-20, conventional 4 feet Cat-lll

84 Supplying and erecting led lamps with following wattage capacity of 220 9.00 No's 188.87

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (iii) 10 to 15 watts.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

85 Providing and erecting Approved make Ceiling fan with double ball 9.00 No's 1738.21

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

86 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 3.00 No's 2166.45

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed (i)

Amps. DP Cat. III

87 Providing and erecting Miniature circuit breaker single pole 6A to 25A 18.00 No's 123.22

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box confirming to IS 8828/1996 with ISI

88 Supplying & erecting floor mounted/ table top single phase 50Hz water 3.00 No's 11557.43

dispenser with SS 304 food grade cold tank specification having three

water tap of hot / cold / ambient water function, LED display with

storage capacity from 2.5 Ltrs to 3.2 Ltrs, cooling capacity 2.5 ltrs/hr,

including refrigerant with 20ltrs refrigerant storage capacity

compartment inclusive 1 No. water topping bottle

Total Rs.

i.e. Rs. Thirty Nine lacs Fourty Four thousand Nine hundred Fourty One and Eleven paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ___________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Ankleshwar Bharuch Bharuch