COMPREHENSIVE REPAIR AND MAINT OF JCOs/ORs MD ACCN MAP ANARWALA, FAFA ACCN, REGION 3 AT ANARWALA AND SUPPLY DEPOT UNDER AGE B/R-I OF GE DEHRADUN

Amount

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars incl demolition of old existing brick/stone work etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars , but except bricks incl demolition of old existing brick/Stone work etc complete all as specified and directed. (Bricks obtained from demolition shall be re-used)

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M & L for 15 mm thick rendering on brick/stone work or concrete surface in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair with water proofing compound as per manufacture instruction complete all as specified and directed. Note: Water proofing compound will be measured & paid separately under respective item of the schedule.

M & L for 15 mm thick rendering on brick/stone work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed.

M & L 15 mm thick rendering on brick/stone work or concrete surface in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair with water proofing compound (uptp 12 Mtr Height) as per manufacture insturction incl taking down cement plaster complete all as specified and directed. Note: Water proofing compound will be measured & paid separately under respective item of the schedule.

M & L for 15 mm thick rendering on brick/stone work or concrete surface in cement mortar 1:6, surface finished even and fair incl taking down cement plaster complete all as specified and directed.

M & L for 5 mm thick rendering on celing surface in cement mortar 1:3 surface finished even and smooth incl taking down plaster complete all as specified and directed.

Supply only liquid water proofing compound complete

M&L for preparation of wall and applying wall care putty 1.50 mm thick to make the surface smooth complete all as specified and directed.

M&L for applying one coat of oil bound distemper in any tint on old surfaces of walls including preparation complete all as specified and directed.

M&L for complete removal existing treatment from wall and applying two coats oil bound distemper any tint including preparation of surface complete all as specified and directed.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower incl preparation of surfaces complete all as specified and directed.

M&L for applying one coat of cement base paint in any tint on old decorated surfaces of walls including preparation of surface complete all as specified and directed.

M & L for applying one coat of White wash on old decorated surface of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (d) Supply and providing APP based polymeric water proofing members 3 mm thick of weight not less than 3.00 Kg/ Sqm. (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (f) M & L for PCC 1:5:10 complete mixed with brick bats 40 mm size. (g) M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth. (h) Ponding test carried out upto 1 to 7 days.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor incl demolition old existing cement concrete complete all as specified and as directed.

M&L for non skid ceramic colour tiles 7 to 8 mm thick (Square/reangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match and fixed with apoxy over and including 15 mm thick screed bed in cement mortar 1:4 incl dismantling old existing tiles /floor complete all as specified and directed.

M&L for non-skidceramic colour tiles 7 to 8 mm thick (Square/reangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm,thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 incl dismantling old existing tiles/floor complete all as specified and directed.

As per item No 22 above but as in skirting fixed over and including 10 mm thick rendering in cement mortar 1:4, incl dismantling old existing tiles complete all as specified and directed.

M&L for glazed ceramic colour tiles size 350/250x7 mm/450x350x7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10 mm thick rendering in cement mortar 1:4 incl dismantling old existing tiles complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement incl demolition old existing concrete complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement incl providing 4 mm thick and 38mm wide glass dividing stripps and demolition of old existing floor complete all as specified.

M&L for 18-20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone complete all as specified and directed.

M&L for grinding and polishing to edges and rounding of granite/ kota or marble slab and smooth finishing complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar 1:6 incl dismantling old existing old stone/floor complete all as specified and directed.

M&L for Machine cut kota stone as in skirting 18-20 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 incl dismantling old stone/floorcomplete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc. 1 Sqm complete all as specified and directed.

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2.0 Sqm each and removing from sitecomplete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the framecomplete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl frame filled with cement concrete1:3:6 type C-0 ( using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl frame filled with cement concrete1:3:6 type C-0 ( using 12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 30mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame 75x50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity acomplete all as specified and directed.

S&F 18mm thick WPC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F 18mm thick WPC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel barrel tower bolts 150 mm long one piece complete all as specified and directed.

S & F stainless steel barrel tower bolts 200 mm long one piece complete all as specified and directed.

S & F stainless steel butt hinges, medium weight 100 mm long one piece complete all as specified and directed.

S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts complete all as specified and directed.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

S & F in 300 mm Mild Steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F of powder coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm. Note :- (i) Making good of wall surface with matching to existing surface (ii) Cost of glass and gauge shall be included in the quoted rate.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows and glazed with tinted coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket, anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long with stainless steel grill consisting of 12 mm square bar & 40 x 5 mm thick SS flat all around incl making good of existing surfaces with plaster and external (cement base paint)/ internal (OBD) finishes complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding incl dismantling old steel work any description complete all as specified and directed.

S&F mild steel, plain, black sheet 1.0 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles,incl dismantling old sheet any description etc. as required complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed.

M & L for applying two coats of synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfacescomplete all as specified and directed.

M & L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm width or girth including preparation of steel surfaces complete all as specified and directed.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed.

Taking up or down PPR/ steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed.

Taking up or down PPR/ steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified and directed.

S&F 15mm bore medium grade galvanised iron pipe with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore medium grade galvanised iron pipe with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S & F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap excluding plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floorcomplete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

S & F in repair 75mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed.

S & F in repair 75 mm dia PVC (SWR) bends complete all as specified and directed.

S & F in repair 110 mm dia PVC (SWR) bends complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) junction double, (double T) equal or unequal complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction double, (double T) equal or unequal complete all as specified and directed.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore Stop cock concealed type fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair gun-metal globe or gate valve ,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair CP Health Faucet with 1.20 mtr chromium plated metalic expandable tube & hook complete all as specified and directed.

S&F in repair CP grating 100mm to 125 dia round with/without hole fixed with cement mortar, complete all as specified and directed.

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including a pair of fixing brackets complete all as specified and directed.

S&F in repair 32mm bore waste fittings/ coupling brass, chromium plated for wash hand basin, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks of capacity 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

M & L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slab supported on wall, beam and columns in floors ,roof slabs, shelves and cover slab Including necessary form work and demolition of existing old RCC complete all as specified and as directed.

S & F mild steel TMT bar 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 70mm thick vibromatic reinforced cement concrete precast 1:2:4 type B-1 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around painted with 2 coats of bituminous paint, as in drain cover slabs finish fair, even and smooth without using extra cement incl form work and 10mm dia bar at spacing 100mm c/c including 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

M & L for PCC, treating of joints, filling of honey combs with using crack fill chemical of Dr Fixit or STP and providing 25 mm thick PCC (1:3) with 4 to 7 mm size stone chipping (1 Cement : 3 Stone Aggregate) with WPC (If ordered by Engineer-in-Charge) incl demolition of Mud phuska and other old existing surface in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part therof) complete all as specified and directed.

M & L for rendering 15 mm thick plastering in cement mortar 1:3 with WPC as per manufacture instruction , complete all as specified and directed.

M & L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed and as per manufacturer's instructions.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A incl dismantling old steel all as specified and directed.

Taking down existing surface /concealed light fitting from any height of any wattage by disconnecting the wire and set aside insafe custody for reuse and refixing in same position after completion of work all as specified and directed.

Taking down existing storage type water heater from any height of any capacity by isolating electric/water supply and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed.

Taking down the existing Energy meters carefully and proper noted down the qtr No Meter No and reading with date and kept in safe custody for re-fixing at site after compltion of bldg work complete all as specified and directed.

Taking down carefully existing Exhaust Fan /Cabin fan /wall mounted /Ceiling fan from any height of any capacit by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work .

S&F in replacement sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed / surface as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed including taking donw old u/s submain wiring. (3 runs of 4sqmm cable and one run of conduit shall be measured 1RM)

S & F in replacement 4 Way VTPN distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacity fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and combination of SP/TP MCBs as outgoings of following capacity including taking down old unsv MCCB DB,s. Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

S & F in replacement MCCB ,4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting of following capacity.

125 Amps with rupturing capacity 16KA

160 Amps with rupturing capacity 25 KA

S & F in replacement MCB SP 6 to 32 Amps 240 volts 'B' Curve 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S F in replacement MCB SPN 40 , Amps 240 volts 'B' Curve 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S & F in replacement sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, complete all as specified and directed.

S & F in replacement MCB DB, 8 way SPN sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

M&L for Point wiring with PVC insulated and unsheathed electric wire 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including concealed/ Surface non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers for mounting switches, sockets including taking down point wiring etc complete for the following type :- Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way switch 5 Amps

One fan point point controlled by one, one way switch 5 Amps .

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one, bell switch 5 Amps

All as per item No.123 above but with stranded copper conductor 2.5 Sq mm (nominal area), single core, PVC insulated cable 1100 Volt grade ISI marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. Note: ( In One ckt of one point only )

M&L for Point wiring with PVC insulated and unsheathed electric wire 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and existing concealed conduit with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers for mounting switches, sockets including taking down point wiring etc complete for the following type :- Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the independent board with other switchs.

One 5 pin 5/6 Amps socket outlet point on same board controlled by one, one way switchs.

One bell point controlled by one, one way 6 Amp button switch.

All as per item No.125 here in before but point wiring with 2.5 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire. Note:(In One ckt of one point only)

S & F in replacement switch piano, flush type, single pole one way 6 Amp complete all as specified and directed.

S & F in replacement switch piano, flush type, single pole one way 16Amp complete all as specified and directed.

S & F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 6 Amp complete all as specified and directed.

S&F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator complete all as specified and directed.

S & F in replacement Electronic dimmer type fan regulator 120 watt 230 volts AC 50 Hz complete all as specified and directed.

S & F in replacement Bell push flush type, 5 Amps complete all as specified and directed.

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement high prssure die cast aluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement high prssure die cast aluminium LED Batten light fitting10W ,100 lumens /watt, IP-20,colour temp not less than 5700,,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement aluminium die cast body bulk head surface mounted LED fitting 10W , not less than 100 lumens /watt,IP-66 colour temp not less than 6500, Inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 4 KV

S& F Glaze Wall Light including 7/9 watt LED ( B22) type complete all as specified and directed.

S&F in replacement LED building security light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cablecomplete all as specified and directed.

S & F in replacement MCB TPN 63 Amps, 415 volts , 10 KA,coonecting with suitable size copper lugs complete all as specified and directed.

S&F in replacement exhaust fan 250 mm sweep, 900 RPM, made up of Sturdy Engineering Plastic body, voltage 230 Volts, 50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc complete all as specified and directed. (Old fan shall be deposited in AGE E/M store yard of GE Dehradun)

S&F in replacement exhaust fan steel body AC Single phase, 230 volt of size 300 mm sweep with blades and frame and louvers with all fittings, complete all as specified and directed. (Old fan shall be deposited in AGE E/M store yard of GE Dehradun)

Supply, laying and testing XLPE insulated galvanised steel strip or wire armoured lctric power cable with stranded aluminium conductor 1100 V grade of size 25 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts and lugs including taking down old u/s cable of any size complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unsv LT Cable for laying of cable complete all as specified and directed.

M&L for sand cushioning and covering of underground cable using crushed metal sand in trenches for cable protection complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for well burnt Class ‘B’ bricks as cover to underground cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed.

M&L for GI Tubing Light grade 40 mm dia(ISI marked) with all fitting /acessories for cable protection complete all as specifid and as directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

PAWAN KUMAR (BID ID -3335544)

AYUSH CONSTRUCTION (BID ID -3342145)

Alankar Traders (BID ID -3340634)

M/S SURAT SINGH AND SONS (BID ID -3350417)

IMPERIAL ENGINEERS (BID ID -3350280)

MUNI RAM (BID ID -3348513)

M/s Ruchi Rabh associates (BID ID -3341658)

Ms dev associates (BID ID -3347939)